Similar Questions

• Total war Shogun 2 - MV 2005 c ++ redistributable install error 1935.

  Hi, hope you're well :)

  yesterday I bought total war shogun 2, and then installed steam (installed by using steam game) began a 7 step installation.
  On stages was the installation of Microsoft visual c 2005 ++ Redistributable.
  The bar stops at about 70% full and then the error message "Error 1935.
  An error occurred during the installation of the assembly. ... "

  I read a lot of FAQ about how to resolve this situation, but nothing helped. I also tried to install manually, but it's the same problem.

  I got to the point where I wanted to reset the laptop to the factory setting but I got a problem with that too.

  Thx for the help.

  Post edited by: NunoAP

  > Got to the point where I wanted to reset the laptop to the factory setting but I got a problem with that too.

  I don t know your laptop, but especially you can retrieve the computer laptop initial configuration using disk HARD recovery.
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  I don t think its problem of Toshiba so don t think Hat someone would be able to help you here.
  Maybe its Microsoft system problem I found this on the MS site:

  http://goo.GL/SQF9x

• Moved not FSX gives error 1935 at end of install on W7 Ultimate 64 bit system.

  New system of four-core 64-bit w / 12G ram and 1 G graphics card

  new installed W7 Ultimate system

  FSX Installer failed: Error 1935 (message about public key token and 32-bit processor)

  How can I install it in this system? Am I obliged to enter in a mode of compatibility or virtual system? I hope not.

  Hello

  Flight Simulator X is compatible with Windows 7, so you don't need to install in compatibility mode.

  First, remove any which instance of Flight Simulator X (FSX) of your computer and then try to install the program in the clean boot state.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.

  Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.

  Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
  [12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1

  I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.

  I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.

  Here's the Setup log:

  = Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
  MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
  MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
  MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
  MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
  MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
  MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
  MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
  MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
  MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
  MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
  Product: SSO x64\SSO64\SSO64.msi
  Action:
  Command line:
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
  MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
  MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
  MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement: 0
  MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
  MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
  MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
  MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
  MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
  MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
  MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
  MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
  MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
  MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
  MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
  MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
  MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
  MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
  MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
  MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
  MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
  MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
  MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
  MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
  MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
  MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
  MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
  MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
  MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
  MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
  MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
  MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
  MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
  MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
  MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
  MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi.

  ..............................

  ................................

  Property (S): GPTSupport = 1
  Property (S): OLEAdvtSupport = 1
  Property (S): ShellAdvtSupport = 1
  Property (S): MsiAMD64 = 6
  Property (S): Msix64 = 6
  Property (S): Intel = 6
  Property (S): PhysicalMemory = 3840
  Property (S): VirtualMemory = 4312
  Property (S): AdminUser = 1
  Property (S): MsiTrueAdminUser = 1
  Property (S): LogonUser = acc
  Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
  Property (S): UserLanguageID = 1033
  Property (S): ComputerName = W1613
  Property (S): SystemLanguageID = 1033
  Property (S): ScreenX = 1024
  Property (S): ScreenY = 768
  Property (S): CaptionHeight = 19
  Property (S): BorderTop = 1
  Property (S): BorderSide = 1
  Property (S): TextHeight = 16
  Property (S): TextInternalLeading = 3
  Property (S): ColorBits = 32
  Property (S): TTCSupport = 1
  Property (S): Time = 12:40:37
  Property (S): Date = 01/03/2012
  Property (S): MsiNetAssemblySupport = 2.0.50727.4927
  Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
  Property (S): RedirectedDllSupport = 2
  Property (S): MsiRunningElevated = 1
  Property (S): The privilege = 1
  Property (S): Name of USER = KPN
  Property (S): COMPANYNAME = KPN
  Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
  Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
  Property (S): UILevel = 2
  Property (S): MsiUISourceResOnly = 1
  Property (S): Preselected = 1
  Property (S): ACTION = INSTALL
  Property (S): AccountAuthenticatedUsers = authenticated users
  Property (S): AccountCreatorOwner = CREATOR OWNER
  Property (S): AccountPowerUsers = power users
  Property (S): AccountUsers = Users
  Property (S): ROOTDRIVE = D:\
  Property (S): CostingComplete = 1
  Property (S): OutOfDiskSpace = 0
  Property (S): OutOfNoRbDiskSpace = 0
  Property (S): PrimaryVolumeSpaceAvailable = 0
  Property (S): PrimaryVolumeSpaceRequired = 0
  Property (S): PrimaryVolumeSpaceRemaining = 0
  Property (S): INSTALLLEVEL = 1
  Property (S): Complus_XML_Data =

  Property (S): SOURCEDIR = SSO x64\SSO64\
  Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
  Property (S): ProductToBeRegistered = 1
  MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
  MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.

  MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.

  MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
  MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
  MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
  = Logging stopped: 01/03/2012 12:40:37 =.
  MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
  MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
  MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
  MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
  MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
  MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
  MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
  MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
  = Recording stopped: 01/03/2012 12:40:37 =.

  Hello Philippe Gupta.

  Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/newThread

• FSX a re - install error 1935.

  Hi, I uninstalled fsx and I tried to re - install and an error 1935 poped upward. Please if anyone knows how to fix this please tell me I love play fsx!

  -WASTE

  Hi magali,.

  1935 error is generally due to third-party applications.

  Follow the steps below to solve the problem:

  Method 1:

   

  Turn off all third-party programs and all startup items and install the game in a clean boot state.

  For instructions, see How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 .

   

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

   

  Follow all the methods listed in the article mentioned below:

  Error message when you install Microsoft Games and mapping programs

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Japanese language pack will not install. Error 1935

  I have Windows 7 and I try to install the Japanese language pack to change the language of my Microsoft Word. However, whenever I try to download it, I get an error saying:

  Error 1935: An error occurred during the installation of assembly component

  {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}. HRESULT: 0 X 80070002

  Help, please! Thank you in advance!

  [1] this is a Windows 7 Home Edition computer.

  [2] I have not all antivirus applications on my computer.

  A1. Language packs are available only for Win7 Ultimate & Enterprise computers.

  A2. You will really regret!

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 1935 when running in W7 computer installation

  Hi all

  I am trying to install a program by running its Setup program on a PC slot on W7. Same part 1 of 97 in the installation I get again and again the following error:

  «The VC2005MSMs OR x 64 installation failed with the following error: Error 1935.» A mistake is is produced during the installation of assembly 'Microsoft.VC80.OpenMP, type = "win32", version ='8.0.50727.4053 ' public key token = "1fc8b3b9a1e1e3b", processorArchitecture = "amd64" If you please refer to help and support "... but there is no real help and support."

  Indeed 1) I checked the TrustedInstaller exist in true fsutil resource setautoreset C:\ ) 2 tried c:\Windows\serviciing 3) there is no weird records in the PC 4) ran as administrator. Tried everything suggested in the forum of the community on this topic.

  Can someone tell me what is on the issue by the type of error it shows?

  Any ideas?

  Hello JoseRivero,

  Have you tried that?

  Why do I have a 1935 error when installing Multisim? :

  http://digital.NI.com/public.nsf/allkb/6ABA23E7F465887186257A37004B8BD9?OpenDocument

  Why my LabVIEW Installation fails with Error 1935? :

  http://digital.NI.com/public.nsf/allkb/98DFF2B564902B9886256FB1004E448F?OpenDocument

  My Software Installation does not and I receive Error Messages When I try to reinstall. How can I fix installation failed? :
  http://digital.NI.com/public.nsf/WebSearch/8703592D07C91AD586256B44000248C6?OpenDocument

  There are other possible solutions, but I want to start with this first.

  Please keep me updated, best regards.

• Error 1935. An error occurred during the installation of Assembly component installed dot net Framework 1.1

  title of the Moose: tried to fix netframework 1.1 after a virus destroyed all .exe files.

  Downloaded dotnetfx, dotnetredis, and NDP10_sp and nothing has worked. Received 19 2802 error messages. Final error was 1935. .installion of the Assembly... custommarshaller s.version = 1.0.5000.0... hresult 0x8002802f.  I tried hresult and he showed me to install MS Office.  I don't have MS Office on computer.

  Hi PatrickMcLeod,

  What is you receive the exact error message?

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  You receive an "Error 1935" error message when you use the Windows Installer Netfx.msi package to install .NET Framework 1.1

  http://support.Microsoft.com/kb/839547

  Method 2:  You can see the steps outlined in the article below

  Error 1935 when installing the .NET Framework

  http://support.Microsoft.com/kb/308096

  Important: method 3 and 4 show you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 3: You can see the steps mentioned in the article below

  How to troubleshoot installation issues of the Microsoft.NET Framework 1.1 in Windows XP or Windows 2000

  http://support.Microsoft.com/kb/824643

  Method 4: Also check out the link below to fix the problem of .exe file

  You are unable to start a program with the .exe Extension

  http://support.Microsoft.com/kb/310585

• Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL,.

  I had this problem but solved by allowing a service that I had turned off - it was something to do with the update of the system components.

  The problem is that there are so many unnecessary services running in W8. It would be nice if I had infinite RAM but on a tablet of the tiny solid state, I had to disable all updates, Defender and because background processes that the machine is completely unusable otherwise. In any case, I have disabled the service once again as soon as installation is complete.

  Hi friends...

  I'm really messed up with this error and try these steps and it did ' t the solution, the same error you get the same error

  (Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL, type = "win32", version = "8.0.50727.762", processorArchitecture, publicKeyToken = "1fc8b3b9a1e18e3b" is "x 86" '. ") See Help and Support for more information. HRESULT: 0X800736B3. )

  New in SQL server 2008 installation so that the redistributable C++ please suggest how to proceed...

  Thank you
  Hash

• Error 1935: I tried everything on all sites in all forums! I'm so desperate. Can I get an answer please?

  Windows Vista Edition Home Premium 64

  Cannot install anything at all.

  Error 1935 {76C3F0F6-9B9D-35DA-81C6-CA8A88CC93CA} HRRESULT:0X8007051A

  Things I've done:
  Account Admin created, off user account controls, run the command prompt scannow things deleted in Win32 file, restarted 1000 times...  I have spent more than 30 hours on this now and lose my mind.  I really need help, please.  I beg you.  Please, I beg you.
  Nicole

  Hello

  Follow the steps in method 2 here:
  http://support.Microsoft.com/default.aspx?scid=kb;en-US;946414 good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Error 1935 when installing AutoCAD. I have Vista Premium. I tried everything on internet.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello mhitzig,

  Thanks for posting on the Microsoft answers Forum.

  I would say the same thing as Palcouk,

  Click here for some articles on Autocad dealing Error 1935.
  Please follow the steps described in the article for a possible solution.

  If the errors persist, contact Autocad.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 1935 HRESULT: 0x80070005

  I can't install a LeapFrog product and found the following errors in the Windows Event Viewer log:

  Product: LeapFrog Connect - Error 1935. An error occurred during the installation of assembly ' Microsoft.VC80.ATL, type = "win32", version = "8.0.50727.4053", processorArchitecture, publicKeyToken = "1fc8b3b9a1e18e3b" is "x 86" '. " See Help and Support for more information. HRESULT: 0X80070005. Assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {97F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}

  I received before similar errors when you try to update iTunes.  Any ideas that I can do the installation to complete properly?

  Hello Marilyn,.

  The following link has solved my problem and the facilities have been successful:

  http://blogs.msdn.com/b/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

  Kind regards

  Andrew

• ERROR 1935. HRESULT: 0X800736B3

  In November 2009 my laptop told me I had a virus, then all of a sudden it crashed and wouldn't turn on so I have to erase everything and re start. A month after that I went to download Itunes, it should reach the end and then tell me that it was a mistake. Recently, I bought a photo editing program and went to install it, once more, he got to the end then told me once more that I got the same error. I have no idea what to do and would really help. The error I get, says

  Error 1935. An error occurred during the installation of the component assembly {97F81AF-0E47-DC99-A01F-C8B3B9A1E8E} HRESULT: 0x80076B3

  It's updated operating system Vista, upgraded installation and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 1935 when installing TurboTax 2010

  Help!  When installing TurboTax 2010 I got a stack of stack memory microsoft install error code 1935: to intuit.tax.Installer.Setup.MSIHelper.install MSI Package (install Boolean, string mispath.string cmdLine, IntPtr owner window handle Boolean computer restart required, Boolean user conceled).  Thanks in advance.

  TurboTax Online support sez...

  Error 1935: "year error occurred during the installation of Assembly '.
  http://TurboTax.Intuit.com/support/IQ/install-product/Error-1935--an-error-occurred-during-the-installation-of-Assembly/SLN12416.html

  Possibly related:

  • TurboTax 2009 can not settle because he thinks of the .NET Framework is not installed, even when it is (26 Jan - 10)
    http://blogs.msdn.com/b/astebner/archive/2010/01/26/9953883.aspx
  • More information on installation issues for TurboTax 2009 caused by .NET Framework 3.5 SP1, verification errors (Apr 05-10)
    http://blogs.msdn.com/b/astebner/archive/2010/04/05/9990936.aspx

• Try installing SAGE simply accounting error: "Error 1935. An our error during the installation of Assembly component

  Try to install simple SAGE accounting and the following error:

  "Error 1935. An our error during the installation of the Assembly {97F81AF1-0E47-DC99-A01F-C8B39A1E1873} HRESULT 0X80071A91 component. »

  After this error, I also receive this error:

  "Error: 1603 Fatal error during installation." Consult the help of Windows Installer (MSi.chm) or MSDN for more information.

  Anyone out there has any help with these errors?

  TKS!

  Hello

  1. are you able to install other programs?

  2. How are you trying to install?

   

  I suggest to follow the steps provided and check if it helps.

  Method 1:

  Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

  Method 2: You can also configure your computer in a clean boot state, and then try to install it.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Error 1935. An error occurred during the installation of Assembly 'Microsoft. VC80. OpenMPLtype = "win32", version = "8.0.50727.42.

  Error 1935. An error occurred during the installation of Assembly 'Microsoft. VC80. OpenMPLtype = "win32", version = "8.0.50727.42", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture is 'c86 '.  This is the error that I get trying to install Visual C++ 2005 Redistributable.

  Could someone point me in the right direction to solve this problem.

  Thank you so much more,

  Tom

  This is the wrong forum.  This forum is for the installation of Windows itself.  Please use the forum Vista programs

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs?tab=all

  or the Visual Studio forum

  http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads