Total war Shogun 2 - MV 2005 c ++ redistributable install error 1935.
Hi, hope you're well :)
yesterday I bought total war shogun 2, and then installed steam (installed by using steam game) began a 7 step installation.
On stages was the installation of Microsoft visual c 2005 ++ Redistributable.
The bar stops at about 70% full and then the error message "Error 1935.
An error occurred during the installation of the assembly. ... "
I read a lot of FAQ about how to resolve this situation, but nothing helped. I also tried to install manually, but it's the same problem.
I got to the point where I wanted to reset the laptop to the factory setting but I got a problem with that too.
Thx for the help.
Post edited by: NunoAP
> Got to the point where I wanted to reset the laptop to the factory setting but I got a problem with that too.
I don t know your laptop, but especially you can retrieve the computer laptop initial configuration using disk HARD recovery.
http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm
I don t think its problem of Toshiba so don t think Hat someone would be able to help you here.
Maybe its Microsoft system problem I found this on the MS site:
http://goo.GL/SQF9x
Tags: Toshiba
Similar Questions
-
Satellite P20 - 504 shutting down / crashing during playback of Medieval: Total War
Salvation;
I run a game program, (Medieval: Total War) that sporadically stops or freezes / crashes my laptop. Sometimes it works OK and sometimes it crashes.
I think it might be a graphic driver problem nVidia, even if I run other programs of game with higher spec requirements.
Is there any where on the Toshiba site, I can actually download new drivers? I searched the Toshiba site and found that there is some possible updates but no installation to actually achieve the download itself... confusing.
Any help is appreciated.
Rob W.
Hello
Can you please check this topic.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2581&MessageID=8148#8148There is a nice discussion on shutting down / crashing when you play a game.
-
Original title: MACBOOK PRO 2011
I have a macbook pro in 2011. It has a 2 ghz processor intel core i7. I have bootcamp and want to download a windows operating system to play total war games. My question is what windows operating system is best for this?
Hello
To find out which is the operating system that is recommended for the Total War Games, you may need to contact the administrator of the game. I suggest post you the question in Total War support forums.
Reference:
If the problem persists, you can contact the Sega support for assistance.
Hope this information helps. Response with status so that we can help you.
-
Rome Total war: Barbarian Invasion error missing MSS32.dll
Rome Total war: Barbarian Invasion, I just installed this game on my laptop, but ever time I try to play, said "the program can't start because MSS32." DLL is missing from your computer"can we all help!
Go here:
http://www.dll-files.com/dllindex/dll-files.shtml?mss32
Download the file, copy and paste the DLL in your C:\Windows\System32 and Rome total war folder worked for me
-
I work in a review of the life cycle of several microsoft products. "The information of ' Microsoft Support Lifecycle" web. But the end of support for the application dates "Visual C++ 2005 SP1 Redistributable Package (x 86)"and 'Visual C++ 2008 SP1 Redistributable Package (x 86)' I could find. "
There is no any date end of support for this application?
Thank you
Hi Anto2,
You can check out the following link and check.
Hope this information is useful.
-
Compatibility Windows 7 for Empire Earth 2 and Rome Total War...
I am looking to buy a new computer with Windows 7 home premium and I want to know if he would be able to run Empire Earth 2 or Rome Total War, they both work perfectly on my windows Xp
Hi Yowuhdup23,
Empire Earth 2 and Rome Total War is compatible with Windows 7.
You can check in the Windows 7 Compatibility Center using the link below:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
You can check Rome Total War is compatible with 7 by visiting the link below and you can also check for the version you are using.
I hope this helps!
Thank you, and in what concerns:
Shalini Surana - Microsoft technical support.
Visit our Microsoft answers feedback Forumand let us know what you think. -
I just bought a new laptop Assus with Windows 7 and bought the DVD Empire Total War. I put in disc 1 and click on install. He loads the updates and the steam but then stops and gives me the error message steam.exe (main execption) unable to load library Steam. DLL. I click OK and then install any more. I have de-installed Steam, Steam sent a request for help, got another way to install the Internet, created a Steam user ID and password... Yet, it is still impossible to load the library. Can someone help me? I want fair paly this game and I am ready to kill people to steam. Please tell me an easy way to install this game so I can play?
Try to use a hard - wire to your router configuration and see if that helps.
-
just bought the total war rome and expansion (barbarian invasion) today. I installed the game and expansion on my computer laptop windows 7 and my the family computer that runs on windows xp. on my computer laptop windows 7 installed, gently, but the game will not run at all... which means that I click on the shortcut on the desktop and nothing happens. the only way to open the game is by going to my computer, select the cd drive and then opening the romeTW.exe file.
However, this makes me only to the main menu of the game and this is where the real trouble begins. Once there, I click on "play rome total war" or in the case of the expansion pack 'game barbarian invasion' which instead of leading to the game itself it just crashes me to the menu let me back at the office level.
on the side, I met NONE of these problems on the computer of windows xp from my family.
I tried to make the game compatible with windows xp (service pack 2), which is recommended and Windows xp (service pack 3) I even gave a shot, but none has made a difference.
I now try to uninstall and install the game for a 3rd time and this time I will try to install under xp compatibility. If you could please leave a message instructing me on how to do that would be extremely useful
Thank you
Hi the skins53,
You may be using a Windows 7 64-bit operating system. Rome total war - barbarian invasion is not compatibile with Windows 7 64 bit operating system. However, it is compatible with a 32-bit version. Click here to check.If you use a 32-bit Windows 7, try to right click on the romeTW.exe file and run it as administrator and check what is happening.You can also check the event viewer for any game related errors.See article.Open event viewerI see that you answered in one of my previous answer on the same question. Try these steps as well.Post back with the State.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Medieval total war will not play on my vista but will play on my xp. What should I do? Y at - it something that I can download to make
does it work?
... You don't need Windows 7... Why buy an expensive overrate and OS for a $20 game? Medieval total war can play on vista... just right click on the game icon > click Properties, under compatibility, click on run this program... blah blah and select "Windows XP (Service Pack). and at the bottom, click on run this program as an administrator. Check on here and tell me if it works, if it's not I have afew more things flat.
-
Medieval Total War (Activision)
I try to play Medieval Total War, but when I try to start a new campaign, the game crashes. I am using Windows 7, 64-bit. I tried to use older versions of Windows, but nothing works. The game was played before (for many years). Any suggestions?
By this link its not compatible with your operating system. I check the website and see if there is something they can suggest. If you did the compatibility mode not much more to suggest other than see if there are patches.
MCP. MCDST. LVL 80
-
My husband threw all my product codes for these pc games and I can't download them for my son on our computer. If anyone knows how to get these product codes that I would really appreciate the info!
Hey GraveIcy,
According to Microsoft games are concerned, you can get a replacement product key. To do this, contact
Microsoft customer service:
Games for Windows: (800) 537-8324Note: There may be a fee to get a new product key.
When you contact Microsoft for a new product key, make sure that you have the following items available:
1. the product CD / DVD, if the product came on disc
2. the computer on which you want to install the product
3. the parties read your original product key, if it is available
4. the number of 'inner circle' on the CD-ROM of the productNote: This number is preceded by an 'X' and contains seven digits.
Reference:
How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
http://support.Microsoft.com/kb/973457For the remaining games, you can communicate with the suppliers to support with the same.
Rome Total War Barbarian Invasion
http://www.Avanquest.com/UK/software/Rome-total-war-barbarian-invasion-51876?meta=play&cat=action&sub=first-person-shooterMedieval 2 total war and expansion Pact
http://www.Avanquest.com/UK/software/medievalii-total-war-108160?meta=play&cat=action&sub=strategyThe battle for Middle-Earth
http://games.EA.com/lordoftherings/Star Wars Empire at War
http://www.LucasArts.com/support/Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Patch Vista for Sega Rome Total War Gold
I loaded Sega Rome Total War Gold on Vista Home Premium. The game crashes. Is there a patch for MS to make the game work on Vista?
Hello
This game isn't compatile with Windows Vista.
See the link below:
Try to install the game in compatibility mode in vista and check if it helps.
See this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
There is no patch from Microsoft for this game.
You can also post this question here for assistance:
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Can't play Medieval Total War on Vista
I put the properties to Windows XP Service Pack 2 and 256 colors. I was unable to activate the administrator under game properties option. I am able to select an option of campaign, a period of time, and a nation, but after 3-5 seconds, rather than starting the game interface and associated with the card, I get an error window microsoft indicating that an error with the program and I will advise if a solution is found.
I removed and re-charge the software several times and also used the oldest programs feature on the control panel. I played this game without any problems on my older xp machine.
Hi cheebs,.
Welcome to the Microsoft Answers site.
Vista Compatibility Center, it seems that Medieval Total War is not compatible with Windows Vista. You can see the report here:
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=medieval%20Total%20WarFor the list of games compatible with Windows Vista, you can check from the above link Vista Compatibility Center.
For help on the game, please post your request to ActiVision forum forum Sega according to the manufacturer of game:
Activision:
Sega:
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: problems running Vista on Bootcamp DirectX.
I have browsed the web for the last little while and cannot find any solution.
I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.
I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.
I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.
I do not know where to go from here, any help would be greatly appreciated
-
Original title: when I try to load the game Empire Total War I have a Microsoft window error
Empire: Total War has stopped working
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.But when I do updates on the game and it still shows the error on the Microsoft Windows error. Also, when he is on the main site of most of the people have problems on this game I noticed just last night so can you help me and I have try all the sites to see if it works try reinstalling it and what I think.Hello
1 did you recent hardware or software changes to your computer before this problem?
2 have you tried the troubleshooting steps to solve the problem?I suggest you try the steps and check them off below.
Step 1: Update the video card driver.
Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-linksStep 2: Download and install the latest version of DirectX.
Reference:
How to download and install DirectX
http://support.Microsoft.com/kb/179113Step 3: Check if the problem persists in the clean boot state.
Put your boot system helps determine if third-party applications or startup items are causing the problem.
Try the procedure described in step 1 in the section below to put your computer in clean boot mode.
http://support.Microsoft.com/kb/929135
Step 4: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. Click Start.
(b) in the search box type eventvwr.msc, and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-ViewerYou can also try contacting the seller game to help on this issue.
http://forums.Sega.com/I hope this helps.
Maybe you are looking for
-
Faulty motherboard Satellite A300
Hello I m wondering if anyone can help me. I got the Toshiba Satellite A300-1bz for 18 to 20 months now, and he collapsed. Warranty was only for 1 year then I m still have to pay the Bill. I was told the motherboard needs replacement? When you turn i
-
When you try to schedule a task, error message 0 x 80090016 Keyset does not exist.
Whenever I try to schedule a task, I get the error message 0 x 80090016 Keyset does not exist. I went to the response page, but I do not understand what protected storage is and I do not know how to find... I followed the instructions, but windows ca
-
Rockbox install e280 v1 how long does take
I have an e280 v1 refurb and the first thing I tried to do is intall rockbox. It was written on my drive for over an hour now. Really worried something has gone very wrong. Anyone who has installed Rockbox, please tell me how long it should take.
-
Cam probs
-
HP Pavilion dv4-3126tx: upgrade to windows 10, display driver does not work
the issue is video card has no working driver detect. I can't get the error code, because the screen is not something. I don't know that the computer's boot up because it can be access by teamviewer and display a 640 x 480 screen. Currently, I'm usin