Error-200088 on digital read

Similar Questions

• Error 200088 using the DAQmx reading VI in a case structure

  Main problem: I'm writing a VI that will read data from a data acquisition and write to a text file when I hit a button "registration". To do this, I use the VI of reading DAQmx in a while loop, which is located in a case statement (I hit the 'Save' button for the case of true), which is in another while loop. My DAQmx create Virtual channels screws are outside of the loop, so a wire goes through three structures to connect these screws to the VI DAQmx Read.

  After clicking on 'Save', my VI works until I hit the "Stop" button, how I get error 200088: ' specified is not valid or does not exist. " If anyone can help me get rid of this error, that would be greatly appreciated!

  I enclose my VI and an image of the error.

  Secondary problem: currently, I use two different DAQmx read live: one mentioned above, which lays down: after clicking 'Save' and the other who reads data continuously to display on maps. I want to combine these two, but I don't know if this is possible given the case statement.

  Thank you!

  Hi Alexwright,

  I made some quick changes to demonstrate the producer consumer loop that would be effective in your case. You want to loop of producer in the first while loop so that you use and the same closing DAQmx task. Moving a forwardthis will require some trial and effective change for your application. Please also make sure you use our debugging tools: http://www.ni.com/gettingstarted/labviewbasics/debug.htm.

  I hope this helps.

• Get error-200088 DAQmx reading (Analog DBL 1Chan 1Samp) .vi < add >...

  Hello

  I am using examples of labview and Labview 2011, I use the a sample.vi acq for the value of the voltage reading.

  but the thing is that I get the error of block then read this DAQmx Read (Analog DBL 1Chan 1Samp) .vi - 200088 ... And it's not indicate the correct voltage in labview.

  I also connected Multi meter with the analog card reader and multi meter gives the correct value, but it is not possible to achieve with labview.

  Please guide me how can I solve this problem which could be the reason for this.

  Thank you very much.

  
  

• ERROR CODE 6 GPIB READ

  Hello

  I enclose a VI that measures and displays capacity depending on the tension swept to a "keithley 590" meter.  In the llb file fix, I use the vi called "590-CV Measurement.vi.

  I get the error 'error Code 6 in reading GPIB in 590-CV Meaurement.vi.

  The VI is supposed to display the data as a table and as a graph. I see the sweeping of instrument keithley tension but no data is displayed and the code 6 error which means 'Operation of e/s abandoned' as indicated

  http://zone.NI.com/reference/en-XX/help/371361B-01/lverror/gpib_error_codes/

  is displayed. Could someone help me please on what is the problem?

  Thank you very much

  Poli

  Hey polished.

  Thanks for the files.  I searched through the conductor of the intrument and the spy file to establish a correlation between the behavior we see with function calls.  I would that try you two things and I would like to know the results.

  First of all open the 590 CV - Measurement.vi and discovers the block diagram.  In the Structure of the event, select the event "Run".  Here, on the second line of function calls you fine one labelled GPIB Read.  The upper part of this VI has a terminal of Timeout.  Create a digital constant of 0 and it wire to this Terminal.  Run your program and see what see you.

  Once this test is done, delete the changes (the addition of the digital constant).  Then change the numerical value that is connected to the same GPIB Read command any value less than 20000, it is the value (10000 or something).  This will change the number of bytes, the function tries to call and hopefully prevent expire.

  Let me know what you get results.

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL

  Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL is not found. Someone knows what and how to find it to download on my computer.

  Whenever I restart my computer, I get an error msg. It reads "Top line" Rundll... Error loading C:\WINDOWS\uyuletuzuho. DLL is not found. Someone knows what and how to find it to download on my computer.

  Assuming that the spelling of the missing dll file is correct your computer is probably infected by malicious software. Click HERE, download, install, update and perform a quick scan with Malwarebytes. Once the completed scan click HERE, download and run a quick scan with SuperAntiSpyware Portable.

• Medic Player will not work. C00D1 error message. Cannot read anything.

  Media Player does not work, gives message C00D1199. Cannot read file due to error. Also called whennot lights up but does not play.

  Please help me HP. My media player don't work, gives the C00D1199 error message. Cannot read file, no visual or sound event.

• Cannot download Adobe digital reader get box asking to run as administrator

  I tried to download Adobe digital reader and when I try I get a race as a box with two options

  (1) saying run the current user who is not checked

  and

  2) run as administrator is checked, I try to add my password and tells me it failed. I'm the admin under my name, so I tried to move to the current user and are not said that I am not authorized

  something I can do?

  Make sure that you turn it back on UAC.  You may download an older version of the UAC must be disabled.

• BlackBerry smartphones "an error occurred trying to read the media.» (Videos/YouTube) (WiFi)

  Hello

  I have a Storm 2, YouTube and videos work fine and dandy, and then yesterday suddenly YouTube stopped working. I would like to click on a video, he strives to buffer for 30 seconds, then said "an error occurred trying to read the media.» I tried to do the thing optimization YouTube, check again. I thought that maybe it wasn't the internet bad connection, since we were our friends, but he came home today, same thing happens.

  Also today I tried to record a video, and when I finished recording and tried to play, same error. I have connected my BB to my PC and played, played very well. The video is in 3GP format.

  The storm 2 is from Verizon, but it is unlocked and I am with Bell. I have not given or the internet with bell is throughout the WiFi.

  Halp meh please.

  Still, first, reboot the device...

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, try again your video playback.

• Error1316.A network error occurred trying to read from the Visual Studio 2010 Tools for Office Runtime (x 86) fileMicrosoft \vstor40_x86.msi

  while trying to uninstall Microsoft visual studio 2010 Tools for office Runtime(x86) of the Control Panel, it is showing an error as [Error1316.A network error occurred trying to read the file "C:\Program Files\Common Files\Microsoft Shared\VSTO\10.0\Microsoft Visual Studio 2010 Tools for Office Runtime(x86) \vstor40_x86.msi"] but the physical location of the file exists.

  Hi Haran,

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://msdn.Microsoft.com/en-in/vstudio/aa718325.aspx

• Unable to play the sims 3, error pops up that reads "service installation failed (0x0175d824)".

  Original title: Sims 3 Setup error service?

  Hello! I tried the support of EA, but they were unable to help my situation. I also tried google, but did not get a lot of research.

  Anyway, I tried to play the Sims 3, but since I did an update of the Windows 7 service pack and an update for my NVIDIA graphics card, it will not open the game. Instead, an error pops up that reads "service installation failed (0x0175d824)". It worked fine up until the point was I updated my computer and then it didn't work anymore. I don't know if it's a system error or other thing, but google and EA technical support has suggested that it is a registry error. I downloaded a registry cleaner and it has really helped, or have manually uninstall then reinstall the Sims 3 game.
  It has also been suggested, I try a clean boot, but I'd really rather than my last resort.
  Here is a link to my characteristics of the computer.

  Hello

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and open the game. We are on a show to see if third-party applications are stop the opening match.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: Check this link suggestions. The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

   

  Method 3: Uninstall the Nvidia drivers, download and install the updated drivers on the manufacturer's Web site and check.

  Updated drivers for the graphics card and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Run system restore.

  Restore the computer to the date where it worked great:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this helps!

• "Some of the text in this document layers were pixelated because an error prohibited them to read.

  5 days ago for the first time in my life, after many years with Photoshop, I got this error message when I open a. PSD document:

  "Some of the text in this document layers were pixelated because an error prohibited them to read.

  On my file psd;

  -a business card, 300 dpi, 15 MB

  -It was created in 2015-04-23

  -J' I have open, change some text info and save it again to 2015-10-30

  -J' I try to open 5 days ago... that is when I got this error

  Now I see all the layers, but none of them have editable text, they were all pixelated. Don't know what was the police I used...

  My Photoshop is CS5 on computer v.12.0.4 x 64

  My mac is OS X Yosemite v.10.10.5

  Help!

  

  A check of Google: Photoshop some of the layers in this wererasterized document type because an error prohibited them Lu.

  Delivered two hits. You can check out them as they leave the particular font being the cause. Two fonts are named.

• Can not download the error code get adobe reader 150210

  Can not download the error code get adobe reader 150210

  Hi andrewb73777409,

  Restart your system and then try to download the player using this link Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards

  Nicos

• LR has started to refuse to import my photos from sd card. They appear in the display of the grid, all verified and ready to import, but I get the error messages. 'Cannot read file', (it of funny, since LR is SHOWING files full resolution), or "unable to

  Cannot import photos into LR. On my other computer, it works fine. With the help of LRCC 2015. Get the error message can't read files, or can not copy to the location.

  How can I simply wipe the slate clean and reinstall or re-import everything? I'm really happy with this, as I am now prevented from using the program.

  Can I reinstall LR and keep the catalog?

  Hello

  Please check what is the Destination defined in the right panel in the import window

  The error means the destination that you copy the files to is invalid or read-only.

  Change the Destination to another location and see if you can import

  Concerning

  Assani

• Installation of Adobe Acrobat DC (30 days trial) fails at halfway because of the error (without a digital ID) on a Mac (Intel Core) version 10.6.8 using Firefox

  Installation of Adobe Acrobat DC (30 days trial) fails at halfway because of the error (without a digital ID) on a Mac (Intel Core) version 10.6.8 using Firefox. Adobe troubleshoot inefficient. Any ideas?

  I don't think that should solve the problem, as it will not be installed on systems running Mac OS 10.9.