Error 213:11 what happened?

Similar Questions

• Dllhost.exe - application error windows 7 what happens if upgrading to Windows 10

  After a power failure that I realized when power has been restored that my computer had been left there on before the failure - 3 days now I get a dllhost.exe - application error message.   I have not installed any new programs or updated everything I know before the current problem.  My question is if I download the new Windows 10 will be cela correct/fix problem dllhost.exe - my computer currently the s running on Windows 7

  I suggest that you enable restoring the system so that it is available the next time that you need.  Note that the system restore must be enabled on the operating system drive, there is no need to enable restoring the system on disks.

  Regarding the dllhost.exe - application error message I suggest that you run a Malwarebytes and a TDSSKiller scan on the machine.  If these find no parasites, then don't look at the registry of the possible clues, this error can be caused by any software installed on the computer.

  These can be useful:

  HTG explains: what Windows Event Viewer is and how you can use

  How to open and use the event viewer in Windows 7

  John

• Error: Javascript Application: what happened: [Exception... "Component returned error code: 0 x 80520012 (NS_ERROR_FILE_NOT_FOUND) [nsIFile.createUnique]" nsresult: "0 x 80520012 (NS_ERROR_FILE_NOT_FOUND)" location: "

  When I double click on the Firefox icon, a box appears under the heading Application Javascript and inside is the error message as described above. The box offers only one option 'OK' and once I click that the program works well. I access email online and when I click on the button of respons or send a new email, the error message appears.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• What happens when I say yes to a window to send a message of error MS

  a few minutes after that something wasn't working properly, a MS Windows window often ask if I want to send an error message, send or do not send.

  If I click on send, what happens with it?  I've never communicate on this issue and if so, how?

  If not, what is the window?

  This wonder below to select a windows theme but I don't know which, I'm guessing to it below: files, folders, and search

  Not the info is sent anonymously to help MS build a database and maybe make a correction or a fix.

• What happens when the error report are sent to Microsoft from my computer?

  I received a call from a Clayton asked for a Windows Service Center. He called about the error reports that were sent from my computer to Microsoft. He gave his phone number as 91 9008 37 23295 in Calcutta, India. If this has nothing to do with Microsoft or Windows?

  John is correct.  And to answer your direct question: "what happens when the error report are sent to Microsoft from my computer? -Not much.  If these reports are used at all, they are used for the statistical analysis and do not respond to individuals.

• I tried running Photoshop on Windows 10 CC, but it gives me "error 213:11". What is the procedure to solve this problem?

  I have Photoshop CC (64-bit) on Windows 10. Until yesterday, Photoshop worked normally, but now if I run the Photoshop application, the PC gives me an error window 213:11 and Photoshop will not start. What should I do to solve the problem?

  Not exactly the same code error, but may have an idea

  Error 213:19 license https://forums.adobe.com/thread/1907953 because of write permissions

• I have a purchased copy of PhotoShop Elements 9.  When I run it now I get an error message - error: 213:19.  What does that mean?  How to use the software I paid?  Thanks a lot for your help!

  I have a purchased copy of PhotoShop Elements 9.  When I run it now I get an error message - error: 213:19.  What does that mean?  How to use the software I paid?  Thanks a lot for your help!

  See here:

  In Photoshop Elements license error

• error code 213:19 what is?  Photoshop Elements will not start past this error message.

  What is the error code: 213:19... Photoshop Elements will not start past this error message

  Error 213:19 | Problem is the license for this product

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• What happens when you replace samples in mode analog output buffer?

  I have a sequence of output voltages that I need to update all the 1/60th of a second.  Each sequence must remain synchronized to a trigger external and controlled by an external clock.  The program is in c ++.

  These are my steps to configure the task:

  (1) DAQmxCreateAOVoltageChan

  (2) DAQmxSetWriteAttribute: DAQmx_Val_DoNotAllowRegen

  (3) DAQmxCfgSampClkTiming: DAQmx_Val_FiniteSamp (and fix the external clock signal)

  (4) DAQmxCfgDigEdgeStartTrig: The front of my external trigger

  (5) DAQmxSetTrigAttribute: DAQmx_StartTrig_Retriggerable

  If I write too slow samples, I get the following message:

  "The production has stopped to prevent the regeneration of old samples. Your application could not write samples in the back buffer fast enough to prevent the former samples of regenerated. »

  I understand this message and this is the behavior I want.

  My question is: what happens if I write the new samples to fast, i.e. before the previous one, who have been posted on the output channel?  This will give me an error or software allows me to crush the samples in my output buffer?

  I'll echo what others have said here.  DAQmx won't let you write samples in the buffer until there are enough empty space to make it--and that's why the entry on the function DAQmx Write time-out.

  There are two ways to go about writing only when the buffer is ready for the next set of data:

  1. Use the timeout to write DAQmx directly.  Do not forget that this blocks however.
  
  
  2. Use the DAQmx software event "Every N samples transferred from the buffer".  This tutorial gives a good introduction to the DAQmx software events and this forum thread goes through a few considerations to keep in mind.

  PS - If you use the C API, use the DAQmxRegisterEveryNSamplesEvent function to register this callback.

• What happens when the NOR-9136 exceeds is limit of heat

  Hello

  What happens when the controller of CompactDAQ OR-9136 overheating?   For example, if the environment is greater than 55 ° C during operation.  Will it report an error, it will stop or damage permentate happen to the control?

  Thank you

  If the environmental requirements (such as the operating temperature) are not met, accuracy and performance of the products may not meet published specifications.  In some cases, the unit can become dangerous, and equipment could be damaged permanently.  OR not to recommend the use of your device outside of the intended operating temperature, but if you have an application where the temperature may exceed 55 ° C, in which you choose to use your controller cDAQ, validate the installation by testing in the conditions before finalizing your project.

• In Labview 8.5, what happens if the input signal exceeds the scope of the signal defined by the DAQ Assistant?

  Hi all

  This should be a pretty simple question, but I can't seem to find the answer online and currently do not have the functionality to test this:

  I'm using LabVIEW 8.5 and have a VI that imports data from sensor through the DAQ Assistant. In the configuration tab, there is a range of signal input. What happens if my sensor exceeds this range? I get a warning? The default value is the maximum (or minimum)? I was interested in writing a code to display an error that I approach the limits of this range, but did not know if I also need to include code to display an error if the scope is exceeded as well.

  Thanks for the help,

  Tristan

  Hello, Tristan,.

  The behavior depends on the selected range and the device you are using.

  If you are using a device with a single input range is valid, we will use this range, even if you set a smaller minimum and maximum in the DAQ Assistant.  So, if your device only supports ±10V and you set the range to ±8V, you will still continue to get valid data after your top sensor 8V until what you approach 10V.  When you reach the limit of the extent of your device, the output will be 'rail', and simply return the maximum value until the signal is less than the maximum value again.

  Note: A device that is nominally ±10V usually has a go-around (such as ±10.2V) which are usually specced in the manual.

  However, if you use a device with several ranges of entry then things become more complex.

  NOR-DAQmx player will choose the smallest range that entirely covers the interval you choose.  For example, suppose that your device supports the following input range: ±0.2V, ±1, ±5V, ±10V and you choose 0V - 3V as the range in the DAQ assistant.  The NOR-DAQmx driver will focus on the input range and the list of the entry lines that your hardware supports and choose the smallest encompassing the entire range that you set.  This would be the ±5V, because this is the only beach that contains up to 3V.  Thus, all between ±5V input signal is returned and none outside this range will be 'rail' to the maximum or minimum value.

  We do this because using small beaches make more efficient use of the resolution of the ADC.  So, we try to use the most effective range based on what you ask without picking up a range that will make you miss data.

  Let me know if I can clarify it more.

• What happens if several consumers - whose architecture SW should I use?

  There are several models of VI and documentation on the producers/consumers type aqrchitectures

  I have some experience with LV, but limited experience with multi-threading programs and events.

  My question is what happens if the consumer also produced data? ... the tutorials do not really extend to it.

  In my application, I have 3 USB CAN transmitters and a NOR-DAQ.

  I intend to have loops or threads for each multiple hardware device at the lower level.

  There will be a loop of the UI (producer) and a "test step sequencer" interpret the activity of the façade and send commands to the hardware devices to take action or perform a measurement.

  My main problem is what is the best method/practice of transmission of data to the 'test step sequencer' material once the acquisition is completed?

  Do you use the same queue to pass data back (for evaluation of success/failure analysis and test) or any other method.

  This might work.

  A difference between the Registrant and the queues is that with queues, you can be sure that the loop of consumer gets the message (assuming that there is no problem with the producer generating and sending).  Even if the consumer is busy doing other things, the message waits in "inbox" of the consumer until he is ready to read.

  A notifier, there is no guarantee that every piece of code that expects a notification will get all messages.  Think that the declarant is a whiteboard.  A message to put out there for anyone interested to read.  But when a new message to be sent, the sender is declined, clears the Board and writes the new message.  If someone who is interested in messages has been busy and you can't go to the Commission while the first message is there, it will never see the message.

  If you want to ensure that each loop gets all their messages, then just a queue for each loop that behaves like an Inbox.  If you need to send the same message to several loops, then queue the data in multiple queues.  If you get a message back, enqueue sending loops reference to queue in the data (self-addressed stamped envelope).  (you can also put a Boolean value in the cluster that could be an indicator as to whether the 2nd loop should send something again or not.)  If you need the first loop to wait for the return data before you go, then he's waiting in the queue.  But you can use the time-out function so that it is not wait forever for something that never comes back and integrate logic into your program so that it can handle this situation (doing nothing, resend the message, open a session, or displays an error message...)

• What happens to a file at the end of playback of a file reference?

  Question general file IO.

  If I'm reading a binary file and the read operation reaches the end of this file, what happens to the file reference?  It exist in memory at this time, or is he out once labview publishes the end of file error?

  I coded a "departure" from playback and functionality 'stop' and the 'Stop' button is the only method in place for the closing of the reading file reference.  Immediate sights are

  (a) what is happening to the reference of the file once the read operation reaches the end of the file

  (b) it is important that I have never close the reference of the file once the user clicks on 'stop '?  (i.e. is it a best practice out there?)

  I'm under Labview 8.6 on Vista Business.

  The file reference is valid when you reach the end of the file. Each read operation returns an error, but you can write to this location. Writing will succeed because it's normal when you add data to a file.

  Close the reference when the user types stop is OK. If you implement a Replay button that you just need to reposition the pointer at the beginning of the file file and read again. This avoids the need to close and reopen the case.