error 2155348249 when trying to backup systemstate on windows 2008 using windowsserverbackup
Hello
You must go to the windows servers forum
Tags: Windows
Similar Questions
-
Original title: how to format drive C?
I have Windows XP installed on my C drive, but due to the lack of hard drive space, I installed another Windows XP on drive D. Now when I try to format the C drive of the new installed Windows, I get this error:
"Windows cannot format this drive. "Leave all utility disc or other programs that could use this drive.Hello
Check if you are able to format drive C in a clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Warning: Formatting the drive will remove or erase all the data on that drive.
-
Error 1935 when trying to install Lightroom on windows 7 64 bit.
Having problems to install lightroom it comes up with the following message to halfway through the installation:
Help!
Hi Delbertrum,
You may wish to consult the Doc KB: http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html
-
I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?
Hello raulganau, welcome.
I suggest to try the system restore to restore the system to a date before the problem started. Try this...1. click on START2. click on "all programs".3. click on "Accessories".4. click on "system tools."5. click on "system restore."6 follow the instructions on the screen to restore the system to a date before the problem startedAlthough the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:Let us know if it works,Thank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: error code 88982F04
Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error." I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC. Can someone please help with an answer.
Thank you
Delete C:\$WINDOWS.~BT
Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.
If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
If you find it difficult to do some of the steps below, please see instructions how do their:
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
I get the error 646 when trying to update for windows vista (KB973917). I was able to update manually when I got this error but I can't find where to download this update.
KB973917 (who is NOT a security update although it is security related) is only available through Windows Update.
Chances are protections in real-time to your antivirus or internet security suite (for example, Norton 360;) Norton Internet Security; etc.) is involved here. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
How can I fix C00D199F error code when trying to burn a CD with Windows Media player.
Original title: How can I fix C00D199F error code
Error message when trying to burn a cd with Windows Media Player
Hello
1. what version of Windows Media Player do you use?
2. the specific issue of burning CD using WMP?
3. What is the exact full error message?
4. what you are trying to burn?
5. is the specific question on the disk?
Method 1: You can run the fixit available in the link below and
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox
Method 2: Clean the disc
Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.
Select a slower recording speed and check if that helps.
1. in the Tools menu, click Options, and then click the devices tab.
2. in devices, double-click the CD burner, and then click the recording tab.
3. in the write speed list, select a slower speed.Method 3:
Perform the clean boot and check:
http://support.Microsoft.com/kb/310353
Follow the above article.
If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.Reference: Burn your own custom CDs
Hope the above information is helpful.
-
Original title: context: MSI Action failed
Hello: I received the 0xC0070643 error code when trying to install the AVG anti-virus program. What can I do to fix this problem, so I have AVG on my computer? I thank really all those who are knowledgeable enough to help me straighten out it.
Thanks again
Daphna
Hello
1. are you able to install other applications successfully?According to my research, this error message appears if you have traces of a previous installation of the AVG software.Download the AVG remover to remove the previous version and then try the installation again and check.
http://www.Avg.com/us-en/utilitiesThe link below also discuss the matter even.
http://forums.Avg.com/au-en/AVG-Free-Forum?sec=thread&Act=show&ID=114995Hope this helps -
get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)
http://www.Microsoft.com/downloads/en/default.aspx
Put the KB numbers in the search at the above link > manual download them.
If this does not solve it:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?
-
Why do I get an internal error message when trying to use acrobat reader?
Why do I get an internal error message when trying to use acrobat reader?
Hi David,
- If you are o Windows computer, please try using the cleaning tool to uninstall Adobe Reader, Download Adobe Reader and Acrobat tool - Adobe Labs, in which case you want Mac you have to manually uninstall Adobe Reader.
- Restart your computer.
- Install the latest Adobe Acrobat Reader-DC using this link http://get.adobe.com/reader/enterprise/
Let me know if the problem persists.
Kind regards
Nicos
-
Exit code 7 and error 1603 when trying to install acrobat pro DC.
Exit code 7 and error 1603 when trying to install acrobat pro DC. What's wrong? I run windows 7.
Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs
Error 1603. Install | CS5 products: http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html
-
Windows update-reception 80240016 error code when trying to update.
80240016 error messages
Hello
Please mention what Windows you use every time you post a problem on this site with some details for your computer.
To troubleshoot your error, you can try to work with the following of article http://support.microsoft.com/kb/957307.
If this does not work, you can also try following steps:
- Open Services from the control panel (--> Services administration tools)
- Stop the following services Background Intelligent Transfer Service, encryption services and updates (automatic updates if you are running Xp) Windows.
- Rename SoftwareDistribution.old folder C:\Windows\SoftwareDistribution of C:\Windows
- Rename Catroot2 to C:\Windows\System32 Catroot2.old
- Restart the Background Intelligent Transfer Service, encryption services and services updates Windows (automatic updates if you are running Xp).
- Search want it.
Concerning
-
I get a message when trying to connect it says windows cannot access specified device.you may not have permissions appropriate to access them on my laptop
Hi MelissaBoltik,
· What is the exact error message?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start and then click Run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 3: Follow the steps in the article to reset the TCP/IP settings.
How to reset the Protocol Internet (TCP/IP)
-
Get 810 error message when you try to connect to the VPN using L2TP protocol
Original title: L2TP will not let me connect.
I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests). All are not updated, but the PPTP, IKEv2 work without problem. The second server that has the CAs and RRAS is a member of the AD - DC server. The Win7 is not on the domain and I have Win7 a client certificate. I have ensured that the CA root of trust is in the user store and computer Trusted Root CA. I have also ensured that the Win7 client certificate is in the user store and personal computer. I get a 810 error message when I try to connect to the VPN using the L2TP protocol. I have exhaustively studied this problem and I can't find a solution to this problem. I also raise the functional level of the domain to 2K8R2.
I think this should be a simple and easy solution, but where can I find the answer?Please help me.Thank you for your time.Allan.Hi Allan,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:
http://social.technet.Microsoft.com/forums/en/category/w7itpro
If you need any other assistance, let know us and we would be happy to help you.
Maybe you are looking for
-
How to eliminate all technical data that shows on all incoming emails?
How to stop additional data that shows when opening emails under the "of, subject, in the" positions, and How to eliminate/stop all the information that appears when an email is FORWADED under the heading"-------- Forwarded Message --------"?
-
Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew ins
-
BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!
I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It do
-
APEXExport - comments request not exported
APEX 5.0.2We used the old Java HTMLDBExport class supplied with version 3 or 4 for several years and he always included developer comments that we enter the export file in the report generator.This happened in very practical when you of the differenc
-
Termination fees for subscription of creative cloud
I am wanting to cancel my subscription to creative cloud,but warns that I'm taking an obscene amount to do.I was not warned in advance that my fees were doped,Why the system is being implemented in this way?I don't want my subscription cloud due to t