Error-229771 after compiling VI in the application builder

Similar Questions

• An error occurred during re-Association of the application programs.

  Hi Experts,

  As he tried to apply the patch

  FAMILY PACK OF FIXES (R12. ATG_PF. B.3 (8919491))

  I was getting error while applying the sine qua non patch 9239089 .. Is the error produced when re - link application programs.

  Follow the steps while applying the patch: -.

  • Stop all application services (only the database and the database listener operational)
  • Downloaded the patch (8919491) from Metalink, have also downloaded the patch pre - req (9239089)
  • Unzip the patches for "/ home/applmgr/patches»
  • Now, as a user applmgr source of the environment file and follow these steps: -.
  • [applmgr@oracleupk appl] $. ./APPSPROD_oracleupk.env
  • Issue "adadmin" and select "Enable Maintenance mode", then exit
  • CD < Patches >
  • Now go to the README.txt, he said: we must apply R12. AD. B.Delta.3 as a prerequisite before you apply this hotfix. Merge not R12. AD. B.Delta.3 with this patch. It must be applied separately.
  • So I will apply 9239089 aka R12. AD. B.Delta.3 first patch.
  • Go to the unzipped patch directory (for example: [applmgr@oracleupk 9239089] $ pwd)

  (/ Home/applmgr/patches/9239089)

  • Question "adpatch.
  • When it prompts you to enter the patch driver, enter the name of the driver

  The error of the logfile adpatch : -.

  Reissue of executable links...

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: Yes

  Made the recovery of executable links.

  STRT_TASK: [Run adjcopy.class] [] [Tue Sep 17 2013 03:32:08]

  Adjcopy.class running:

  adjava-mx512m - nojit oracle.apps.ad.jri.adjcopy @/u01/appl_top/apps/apps_st/appl/admin/PROD/out/apps.cmd

  / bin/sh: adjava: command not found

  I also see warnings in adpatch.log: -.

  AutoPatch WARNING:

  Product data file

  /U01/APPL_TOP/apps/apps_st/appl/Admin/zfaprod.txt

  There is no product "zfa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/APPL_TOP/apps/apps_st/appl/Admin/zsaprod.txt

  There is no product "zsa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/APPL_TOP/apps/apps_st/appl/Admin/jtsprod.txt

  There is no product "jts".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  Ankur,

  Please see the following documents.

  Lack of responsibilities after that put 12.1.3 at level [ID 1309852.1]

  SYSADMIN responsibility missing after upgrade to 12.1.3 [ID 1246824.1]

  Troubleshooting missing responsibilities for user [ID 429852.1]

  See also (known on top of Patch 9114911 - R12.HR_PF issues. B.Delta.3 (Doc ID 1075479.1)).

  Thank you

  Hussein

• .exe white screen after you have used the application on a programme of work Builder.

  Hello

  I am new to Labview development and I have a problem.

  I changed an application to fit my needs and when I run it there is no problem (Labview 7 Express) in debugging.

  After using the application builder to build my new soft, I have a white screen at launch.

  I tried before using the application generator and succeed with this same software (when my changes were in progress), and it worked.

  Do anyone have an idea? You need more info?

  Thank you.

  
  

• Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application.

  Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application"How can I do this?

  Original title: when I turn on my computer

  You should consider carefully as pop - up and determine what application has a problem.

  If he has no idea anywhere in the pop - up, first physically disconnect your computer from the Internet (because in the following steps, you will temporarily disable your antivirus software).

  • Click Start and type "msconfig.exe" (without the quotes) in the search box and press ENTER.
  • When the "System Configuration" window opens, select the tab "start".
  • Uncheck the half of the listed items (for your convenience, click on "Startup Item" in the column header to sort the items alphabetically)
  • Click OK and restart (click here to avoid the warning that you are in a diagnostic mode)

    If the pop-up warning does NOT appear, the problem application has been one of the items you unchecked.  If this is the case, reopen the System Configuration and check again half of the elements that had checked you.

    Similarly, if the pop-up warning appears, then the application problem is that remained turned on. In this case, open the Configuration of the system, again check the items that you had disabled, then uncheck half of the remaining items.

  • Restart and continue the process until you have identified the problem application.
  • Once you have identified the problem application, open System Configuration once more, select "Normal startup" on the "Général" tab and restart.
  • Do not forget to reconnect your computer to the Internet
  • Uninstall or reinstall the application issue.

• error unknown software exception (0xc000409) in the application at location 0x00414d78

  It has been a few days I can only open the Adobe .pdf documents, but I cannot print, because it appears the following message: "error unknown software exception (0xc000409) in the application at location 0x00414d78.

  Hi andreav31807571,

  Please let me know the version of the player & OS installed on your system?

  Try this: -.

  Go in Edition > Preferences > (improved) security > protections Sandbox and deselect the option enable protected at Startup Mode. See if that clears it.

  Kind regards
  Nicos

• ORA-28112: failed to perform the function of guidance - error in the Application Builder

  Hey all,.
  
  I added a political function to one of my paintings, and now I get this error when I try to update a report region that refers to this table.
  
  "The query cannot be parsed into the generator. If you believe that your query is syntactically correct, check the generic "columns" box below the source of the region without analysis. "ORA-28112: failed to perform the function of guidance."
  
  If I remove the policy then everything works fine. My application works well with the policy in place. I just get these errors in the application builder when refreshing a report or a LOV that references the secured table.
  
  The analysis schema is APPL_USER.
  
  Here's the political function:
  
  FUNCTION DOCUMENT_TABLE_POLICY (object_schema IN VARCHAR2 DEFAULT NULL
  object_name IN VARCHAR2 DEFAULT NULL)
  RETURN VARCHAR2 IS
  v_nt_seq NUMBER;
  BEGIN
  IF use = "APPL_USER" or INSTR(user, 'ITFC_') = 1 THEN
  RETURNS A NULL VALUE.
  END IF;
  
  IF V ('APP_USER') IS NOT NULL THEN
  IF V ('F_NT_SEQ') IS NOT NULL THEN
  v_nt_seq: = V ('F_NT_SEQ');
  ON THE OTHER
  SELECT NT_SEQ
  IN v_nt_seq
  OF APPL_USERS
  WHERE UPPER (NT_ID) = UPPER (V ('APP_USER'));
  END IF;
  
  RETURN ' (DOCUMENT_TYPE, MANAGED_BY_ELEMENT, PROGRAM_CODE, CONTRACT_NUMBER) IN (SELECT DISTINCT R.DOCUMENT_TYPE, USL. ELEMENT, USL. PROGRAM_CODE, USL. CONTRACT_NUMBER OF USL, R IPRACA_SECURITY_ROLES IPRACA_USERS_SECURITY_LINK WHERE R.SECURITY_ROLE_SEQ = USL. SECURITY_ROLE_SEQ AND USL. NT_SEQ = ' | To_char (v_nt_seq) | ')';
  END IF;
  
  -UNAUTHORIZED USERS CANNOT SEE ANY DATA
  RETURN '1 = 0';
  END;
  
  This is how to set up the policy:
  
  BEGIN
  
  DBMS_RLS. () ADD_POLICY
  object_schema = > 'APPL_USER '.
  , object_name = > 'APPL_DOCUMENT '.
  , policy_name = > 'APPL_DOCUMENT_POLICY '.
  , function_schema = > 'APPL_USER '.
  , policy_function = > ' APPL_SECURITY. DOCUMENT_TABLE_POLICY'
  );
  
  END;
  
  
  Any help would be greatly appreciated!
  
  Thank you
  
  Jonathan Hart
  APEX 3.1.1

  It is possible that this raises an exception:

  SELECT NT_SEQ
  IN v_nt_seq
  OF APPL_USERS
  WHERE UPPER (NT_ID) = UPPER (V ('APP_USER'));

  Is there a line in APPL_USERS where NT_ID = ?

  Scott

• the application builder exe file does not work

  Hi all

  I have a usb data acquisition module, it is USB 2408-2AO of MC. I order the module with a VI and it works very well. I used the Application Builder to create an exe of the VI. The exe works great too, but only on my own computer and not on other computers.

  I already made the other screws's exe files and never had any problems to run the exe on other machines. I also tried to do an installation of the VI program and not just a stand-alone application, but once again the final application does not work. The application runs without problem on the target computer, no errors are displayed, but it just does not control the USB module as it should. I think the problem is that the builder Application does not include al screws required in the installation program, particularly MC devices to control the USB device. I tried to manually choose the screws, but it seems that everything is included... I am sure that the problem is the USB device, as I did other exe files and they all work very well (but they do not control the USB device) on other machines. Someone has any idea how to solve the problem?

  
  

• Kernel32.dll in the application builder

  Application builder has been seemed to be changed in version 8.6

  Due to the specific API function (file rename), I have to use kernel32.dll (CIN) in my application.

  After that the creation and execution by pressing 'Go' button (on the Launcher program) as a first step, it works.

  Continuous pressing second "Go" button, labview was told the Subvi confined CIN is failed or lack of external function Kernel32.dll:MoveFile in Subvi.

  The pitcher to load the main program (and the Subvi) by reference.

  When I did not understand the Subvi explicitly in the application builder property, "Subvi is missed.

  In either case, include the Subvi in "still included" in the generator of the application, "the service is missed.

  The kernel32.dll file was copied in the folder of data support.

  (1) how to set the property of the generator application for kernel32.dll?

  (2) the copied kernel32.dll file is valid in the other version of windows?

  labmaster.

  Have you tried the Move function? Why do you think that I suggested it? It can be used to rename files and directories.

  

  Rename dir1 dir2.

• Is it possible to change the theme of the Application Builder?

  Is it possible to change the theme of the Application Builder? There are themes for applications; What happened to the constructor itself? I looked but did not see a selection for that.
  
  I'm a Geek through and through, I guess, but I think that you might be retentive xxxx love all of these square boxes. And these old eyes squint to focus among the vast sea of shades of gray. Black on gray and gray on white gives me a pain in the eye!
  
  If this is not the case, is there a place where the suggestions like this are made. Thanks - Howard

  Hello

  Is it possible to change the theme of the Application Builder?

  The short answer is, no.

  You can offer this feature here
  https://Apex.Oracle.com/pls/Apex/f?p=55447:1

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• What is the logic in the Application Builder

  Hi guys,.
  What is the logic in the application builder when you create a report for example. When we create a static report, we're going through these four steps:
  < ul >
  Display attributes
  Source
  Report attributes
  Conditional display < /ul >
  From the stage of 'Source', we can click on 'Create a report' and create the report...
  
  is there a table for each step... or there is a collection for each step. For example, when we click the button create collections are inserted into tables, then get emptied. ?????
  
  In my case, I have three real estate entities: owners, property and marketing. It goes like this:
  Enter the details of the owner, then click on create to go to the next page to enter the details of the property, then click on create to go to the next page to go into the details of marketing.
  
  I hope that my question is simple...
  
  Best regards
  Fateh

  Fateh says:
  Hi guys,.
  What is the logic in the application builder when you create a report for example. When we create a static report, we're going through these four steps:
  

  
  Display attributes
  Source
  Report attributes
  Conditional display

  
  From the stage of 'Source', we can click on 'Create a report' and create the report...

  is there a table for each step... or there is a collection for each step. For example, when we click the button create collections are inserted into tables, then get emptied. ?????

  In my case, I have three real estate entities: owners, property and marketing. It goes like this:
  Enter the details of the owner, then click on create to go to the next page to enter the details of the property, then click on create to go to the next page to go into the details of marketing.

  Who would be called a "Wizard" in the APEX (also frequently used in the Application Builder as you say). There is an 'Assistant' option when creating a new page that allows you to create and link the basic multiple page structure. Themes have "Assistant progress List" (horizontal) list templates (vertical orientation) and "Assistant list progression, horizontal Train' that can serve as indicators of progress of scene. You must build the content of each page using standard components. Once completed the "Wizard" there is nothing to indicate that the pages are linked logically, strangely, it generates a list of course assistant for you.

  Use Collections to store the data of intermediate stages before final treatment, if all the data is captured in a session. If you want persistence between sessions (e.g., allowing users to enter information over several days) use drafting/staging of the separate tables instead in more collections of capture data before final validation and promotion for the main tables.

• Increase log idle time in the Application Builder

  Hello
  
  We have recently updated our version of the Apex to 3.2 and one of the things we see is that if the application builder has been inactive for a period of time when you want to do something new you must reconnect.
  
  Does anyone know where I can see what is the idle value and can I increase it?
  
  See you soon,.
  Paul.

  Hello

  This should help you
  http://www.inside-Oracle-apex.com/is-your-Oracle-Apex-session-timing-out/

  BR, Jari

• Skype not opening after having moved to the Applications folder

  Back a few months ago, I downloaded Skype on my computer. I was still pretty unfamiliar with the Mac at the time, so I was not very well what to do with the dmg that I got. Simply do not know better, I ended up launching Skype from the dmg. That's how I used Skype until very recently. A few months after this happened, I learned that you were supposed to copy the application in the Applications folder on the dmg. However I did not worth to fix this error until now (in order to remove this disk image of Skype sitting there). I deleted the Skype of the dmg icon on my dock and copied in the Applications folder. I then tried to run, but it crashed before it could do something. The main window of Skype did not appear.

  If it's worth anything, there is a very old version of Skype on this computer, the surplus of when a member of the family used a few years ago. However Skype on the dmg would be fine, so I doubt that this could be the culprit.

  I am running OS X Yosemite 10.10.3 on an iMac 27-inch Mid-2010.

  We always recommend to install the latest version of Skype... That said, try this: download the latest version by clicking on the link at the top of this forum page downloads. Then, open the Skype.dmg file you will find in your downloads folder. Drag and drop the Skype icon to the icon of the folder Applications in THIS WINDOW. This will install Skype. Subsequently, you will find Skype (the application) in the Applications folder on your hard drive, where you can start. Once it launches, click right (or click/hold) Skype in the Dock icon and select Options. Choose to keep Skype in the Dock, and it will fortunately still live there then.

  --
  Entia non sunt multiplicanda praeter necessitatem.

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• What runtime error of Reader 9 to redirect the Application data is fixed?

  Has anyone heard when Adobe will fix the error Runtime of Reader 9 to redirect the Application data?  It still occurs with 9.1.3 only users who have their Application Data redirected folder via Group Policy.

  It lasts for a while, as evidenced by the following link and my own personal pain, fight against this

  http://forums.Adobe.com/thread/391738?start=100 & tstart = 0

  I also installed Adobe Reader 9.2.0 via Active Directory and I can confirm the runtime error message still appears, and the application closes. However, the suggested workaround solution worked. After you have set the folder list / permission to read the data on the shared folder of HOUSES on the server (only applied to the folder itself) Adobe Reader has started working.

• Transition from tables to call a library function does not work after the application builder

  Call a DLL with function of library to call that requires a data table to work properly in Labview, but after building an exe with the application generator, the call no longer works.  Dereferecing the pointer in the DLL returns all values 0 and not the real.

  So finally figured it out.  It seems that you cannot use the utilities of pointer in an exe built such asGetValueByPointer.xnode.  Once I replaced the calls with calls to DSNewPtr and MoveBlock library, everything works as expected.