Similar Questions

• Hallo weiss someone was found means that Fehler: 4MOT/4 / 40000003:HDD - 1232

  Hallo... weiss someone was found means that Fehler: 4MOT/4 / 40000003:HDD - 1232

  und wie ich diesen beheben kann?

  Gruss aus Berlin Verena

  Dass ein für die Fliegengitter ist Kuhlgeblases due. Es ist nicht schwer zu repair, aber Sie wollen einen Autorisierte Apple-Repair-Shop're zu tun: https://locate.apple.com/de/de/

• Ive just restored my laptop from the disk recovery, and commissioning I get an error 8007045 B code, anyone have any help? __

  think that it pretty much says it all in the title!

  Hi legar72,

  1. you have made a full recovery system on the laptop using the recovery disk?

  The error code - 8007045B is associated with failure to install.

  If you have used the system recovery disk provided by the laptop manufacturer to perform a system recovery.

  You will need to contact the manufacturer of the laptop computer for more information about the installation failure.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 4MOT/4 Error Code / 40000003:HDD - 1229

  I ran AHT and has got a unique error code-

  4MOT/4 / 40000003:HDD - 1229

  Disk utility does not show a problem. It is a mid 2010 27 "iMac. Do I need to have the hard drive replaced?

  Test hardware error Code: "4MOT/4 / 40000003:HDD - 1229" on 2011 27 "iMac i7. Help

  more

  4MOT/4 / 40000003:HDD - 1229

• 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373

  Does anyone know the significance of the errors 4MOT/4/40000003: drive HARD-1383 and 4MOT/4/40000003: drive HARD-1373 that occur when you run Apple Hardware Test (AHT)?

  I guess it has to do with the hard drive by noticing the "HARD drive" code. IMac 27 "mid 2011 EMC 2429 3.1 GHz Intel I5

  Thanks for the reply.

  These error messages indicate cooling fans have a problem.  It is a hardware problem which is best treated in an Apple store genius bar.  The assessment will be FREE.

  Ciao.

• When I download itunes on my pc, I get an error of analysis package, any help?

  "When I download itunes on my pc I get a parse error in the package, any help?

  Hello xlAdrenaline,

  Thank you for using communities of Apple Support.

  If I understand your message that you receive a packet parse error when you try to install iTunes on your Windows PC. The following article has some great not to help solve this type of problem:

  If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

  Best regards

• In Windows NT Workstation 4.0, I get this error message: cannot find the sound card with this port number. Please check your settings and try again. Any help?

  There is this computer that I recently installed Windows NT Workstation 4.0 on and I would like to know how to install sound blaster 16, on this without receiving this error message. If someone wants to say how it is obsolete or install a new operating system, please do not post. Thank you. If anyone has the same issue on an ordinary pc or Virtual PC, you can publish. It is a computer. If you're going to say how microsoft does not support, I need to install a better operating system or the above mentioned inconvenience or something similar to those, please do not post. Any help will be appreciated. The specific sound card is Creative Labs sound blaster Pro 16 of 1.x.

  Hello Grant Heckel,

  Windows NT Workstation 4.0 is not supported in the Microsoft Answer forum.

  You can do a search on the internet and find information about the Sound Blaster Pro 16 and NT 4.0 Workstation.

  Such a thread is listed below:
  http://www.pcguru.plus.com/VirtualPC.html

  Sincerely,

  Marilyn

• Windows update error 80070005 and so on! New theory. Any help?

  I had this problem that seems to affect most vista users where after a short while that the packs from windows update.
  I tried ALL the solutions offered by people and like so many other users with the same problem. Nothing works.

  However, one thing I noticed when trying to find my own solution was that it lacked the library file «wuauserv.dll» I found this trying to pass on automatic updates using the services.msc run program and change the upadte properties. I had an another new error message that says "error 2: could not locate the file ' then watch popular files updated and search my hard drive for them. So I re-uploaded wuauserv.dll (whether it is one, I couldn't find) and moved to the system32 folder, where it should be. Still nothing works.
  Actually I can not yet manually launch the much worse is it connect and download updates. It seems to have given up completely. And there may be still more missing files.

  But in any case, my conclusion is that it is a problem of file misssing is not a problem of entries has already applied. It's just a case of finding the right files and resettlement.

  However, it is more complicated than it seems. I think that there should be a uninstall and reinstall option for the Windows Update program, but microsoft really seem not to care much for this problem, and he made my head for months. and my vista and laptop are only 4 months!

  Any help would be appreciated.
  Calvers

  Cheers for the help. I finally found the solution. It's here: http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
  This guy is a legend and gives not only the solution but elso explains the problem in the first place... it was the fault of microsoft. In any case, this is THE definitive answer. Follow it carefully.

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "parser error message returned error 0 x 80070017", any help?

  error message occurs at startup and at random after, reads "error analysis of the C:\WINDOWS\Nicrosoft.NET\Framework\v1.1.4332\config\machine.config Parser returned error 0 x 80070017", any help?

  Hi jacquemerritt,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to repair an installation existing.NET Framework

  http://support.Microsoft.com/kb/306160

• Hi, need help with this error. -) Can't find a solution anywhere, any help greatly appreciated, thank you.

  Hi, my problem is that my PC stops on its own, it is worse when cold and runs 3 - 4 times on first boot before loading the same windows. When windows starts, as soon as I start to play or download internet video, the pc stops again. Also at random when times navigation he will die too. There is no overheating btw.

  The error in the event viewer is
  Nvgts error, event ID:4
  0000: 00 00 00 00 01 00 54 00... T. 0008: 00 00 00 00 04 00 04 c0... To 0010: 00 00 00 00 00 00 c0 c2... A... AT 0018: 00 00 00 00 00 00 00 00... 0020: 00 00 00 00 00 00 00 00

  I changed the power supply and the display drivers re-installed (for Nvidia 6100 nforce 405), but without success. It's really bugging me now because its been more than 2 weeks and it seems to deteriorate.
  Any help greatly appreciated, thank you.

  From my experience, random and immediate judgments are usually caused by overheating or problems with the RAM.  You seem to have eliminated overheating as a cause.  The next most likely cause is your RAM.  Try to remove your RAM modules and put back them in their media.  If you're lucky, that might solve your problem.  If you have more than one RAM module, you could try to remove one module at a time and see if the problem is improving (indicating the wrong module).  Microsoft also has an audit of program memory which can help:

  "Microsoft Memory Diagnostic"
    <>http://oca.Microsoft.com/en/windiag.asp >

  HTH,
  JW

• I can not receive emails, above indicates code error whenever I try to open the trash, appreciate any help.

  I can not receive emails, above indicates code error whenever I try to open the trash, appreciate any help.

  To help you effectively, we need to know exactly which e-mail system you use.  You can see the differences here

• CQ60-419wm frequently stops without error message. new bios any help.

  My laptop turns off for no apparent reason after varying amounts of time.  Screen goes black and after a minute or so, all the lights go out.  Do not try to restart.  I get no error message and loaded a bios updated which did not help.  Any help?

  Hi Jo,.

  It would be really not like this problem is due to overheating (as you noted) because the fan has failed.

  The replacement procedure is detailed from Page 80 of your & Maintenance Guide.

  However, it is not easy to replace part so you can consider taking the laptop to a computer local repair shop and get at least an estimate for them this replacement.  Then you can weigh the cost the cost of a new laptop.

  I hope this helps.

  All the best,

  DP - K

• i CANNOT GET ITUNES FOR AUDIO ERROR MGE SAYS CAN'T FIND MUSIC ORIGINAL leader. ANY HELP PLEASE

  Seems that each song has an exclamation mark next to the number. More burn to a cd can't get same error message that is «original file not found» Any help will be greatly appreciated...

  You must delete these songs in the iTunes library, then add them to the return of their real folder location.

  See you soon,.
  Jerry

• Error updating LR6 U43M1D204. Very grateful for any help!

  Hello

  I am trying to apply an update to 6.5 from LR LR 6.0 on my Mac OS but due to lack of continuous update and I get the following error message. I want to apply the software update it is because LR6.0 does not read the raw files from my new camera Canon 80 d

  Error message

  Lightroom CC / 6 Update - June 2016

  There was an error downloading this update. Quit and try again later. Error code: U43M1D204

  Adobe Application Manager

  There was an error downloading this update. Quit and try again later. Error code: U43M1D204

  Just a thought is that I'm on vacation and I bought LR6 (license no CC) in the United Kingdom. That's why perhaps recognize that I'm not in the United Kingdom a blocking the update?

  Any help welcome as I am very eager to see pictures of my new camera. Thank you!

  Pete

  This error message means that the download was corrupted.

  Try another browser or other internet connection or a download manager.