Error 6 - impossible to insert an image in an e-mail

Similar Questions

• Impossible to insert an image of contiuning in layer 2 w/o it from frame 1

  I'm trying to fade in and out a few different photos. Example,

  Layer 1 to photo frames 1 30 1 - with keyframes on 15 and 30. Alpha 0% on frames 1 and 30

  Layer 2 a 2 digital 31-60. with keyframes on 30 and 45.  Alpha to 0%. on the 30 images and 60 etc etc.

  but whenever I start the frame in layer 2 it fills with frames 1-30 of 30 UGH! For some reason, I get here where I left in layer 2 on frame 31 w/o it from frame 1. what I'm doing wrong here? everything I do is click on frame 31 and then add the next symbol/picture but everytime it Greys images 1-30 and has a black solid point Framework 1. UGH!

  You need a keyframe to the image you want that content to start.

  So, in your example, layer 2 would be empty, and you must add a key frame to frame 30 and then add content in frame 30.

  Frame 1 is a default image key.  The filled dot represents a keyframe with content.  All "grey" executives are a continuation of a keyframe (a keyframe of many executives intended to be displayed)

• Insert an image in lob, but - error...

  Hello everyone, I am trying to insert an image of local computer in the DB. But seems that it is not working. Here's what I did. I create a directory, a temporary table and a procedure (all tests). Here's the code. I'm on 9.2.0.5
  

  CREATE OR REPLACE DIRECTORY 
  IMAGE_DIR AS 
  'C:\image_dir';
  
  CREATE TABLE SYSTEM.TEMP_IMAGE
  (
    ID          NUMBER,
    IMAGE_NAME  VARCHAR2(50 BYTE),
    IMAGE       BLOB
  );
  
  CREATE OR REPLACE PROCEDURE SYSTEM.insert_image_file (p_id NUMBER, p_image_name IN VARCHAR2)
  IS
     src_file   BFILE;
     dst_file   BLOB;
     lgh_file   BINARY_INTEGER;
  BEGIN
     src_file := BFILENAME ('IMAGE_DIR', p_image_name);
   
     -- insert a NULL record to lock
     INSERT INTO temp_image
                 (ID, image_name, image
                 )
          VALUES (p_id, p_image_name, EMPTY_BLOB ()
                 )
       RETURNING image
            INTO dst_file;
   
     -- lock record
     SELECT     image
           INTO dst_file
           FROM temp_image
          WHERE ID = p_id AND image_name = p_image_name
     FOR UPDATE;
   
     -- open the file
     DBMS_LOB.fileopen (src_file, DBMS_LOB.file_readonly);
     -- determine length
     lgh_file := DBMS_LOB.getlength (src_file);
     -- read the file
     DBMS_LOB.loadfromfile (dst_file, src_file, lgh_file);
   
     -- update the blob field
     UPDATE temp_image
        SET image = dst_file
      WHERE ID = p_id AND image_name = p_image_name;
   
     -- close file
     DBMS_LOB.fileclose (src_file);
  END insert_image_file;
  /

  But when I try to insert the image, his throws below error...
  my image test.jpg sits in this directory (where I created a directory). 'C:\image_dir ';
  
  so, how can I make oracle look my local dir?
  
  BEGIN insert_image_file(3,'test.jpg'); END;
  
  Error on line 1
  ORA-22288: file or LOB FILEOPEN operation failed
  No such file or directory
  ORA-06512: at "SYS." DBMS_LOB", line 504
  ORA-06512: at "SYSTEM. INSERT_IMAGE_FILE', line 26
  ORA-06512: at line 1

  But I want this to work with the image (or directory) local to the client machine?

  DB server knows NOTHING about the client system

  UTL_FILE_DIR MUST be local to the DB server!

  I don't make the rules.
  I'm just telling you how Oracle performs!

• Impossible to change painted the background impossible to set this image as paper. An internal error has occurred. »

  Title: I am unable to change the background of my computer.

  Windows 7 Edition Home Premium.  Whenever I try, an error message is displayed saying "this image may be defined as wallpaper. An internal error has occurred. »

  When I try and access a photo, I do not see the image.

  Hello

  Follow the steps mentioned below and check if that helps:
  (a) click on start.
  (b) select Control Panel .
  (c) select ease of access Center.
  (d) select make the computer easier to see.
  (e) if there is a check mark to Delete (if available) background images, uncheck the box, restart the computer and try to Add images to the background.
  (f) if there is no check box in front of Delete (if available) background images, select the box to Add a checkmark.
  (g) customization, select a color background and Save it.
  (h) now repeat steps 1 to 4 of the .
  (i) uncheck remove background images (if available), apply and OK.
  j) now, I suggest you to change the background image and check.
  For reference:
  Change your desktop background (wallpaper)
  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background-wallpaper
  Hope this information helps.

• I try to insert two images in a single document, group them, and then export it to a jpg file but cannot do so can you please help. Thank you

  I try to insert two images in a single document, group them, and then export it to a jpg file but cannot do

  Hello sara,.

  For my part, I prefer to use my German PS in this way (I try to translate the commands):

  Use the same height for both images.

  Open the first image in PS.

  Use Bild > Arbeitsflache (Image > work plan?) See screenshot:

  

  From there:

  

  Give him the new with, by clicking on the left or the right indicating the hand playing around (trial and error).

  Now you can insert your second image.

  Hans-Günter

• Code error-301 when you deploy the image

  Hello
  I have a problem.

  I want to deploy an image from a client light t5740e to a client t610.

  I cloned successfully of the image to a folder as a file .ibr deposit.
  I also have an older version of the image as a file on a FTP repository .img.

  I can successfully deploy the image the FTP repository to a t610 client.
  The problem is that this image is obsolete and cannot be used.

  When tryng to deploy the image to a file repository shared, I get the following error code:
  2013-04-22 11:38:47 ErrorCode:-301, error information: the device of the faimly bios is not match the image.

  I also tried to create an image using HP ThinState Capture, but recevie the following error during startup:

  Inititializing... * ERROR * system has failed the OS image.

  After that, I downloaded the standard image on the HP site and created a USB key. Then I replaced the .ibr file, but it still gives me the same error as ThinState installation.

  Is there a way to bypass the repository of shared folder and clone the image to the FTP repository under a .img file and deploy it to the client t610?

  Or is it possible to bypass the BIOS checking when deploying the repository of shared folder?

  Assuming that the version HPDM is common (4.5 with SP2), there is an option in the task editor when applying the deployment to enable Cross-platform for Imaging.

  This is however strongly discouraged because the picture you shot of the t5470e will not have the necessary drivers for the t610. The original image on the web site of HP will have drivers for both, but the part of the RunOnce scripts at first start after imaging USB is clean the unnecessary drivers by the platform to maximize space on the device.

  However, you should be able to pull the image of 7th WES using the FTP browser component in menu HPDM model. This will generate a model that can be deployed to clients light t5740e both t610.

  One last thing to remember is to make sure that the agent is updated on the device target before deployment and then again after the deployment.

• How to insert an image in a XY Chart

  Hi all, I'm trying to insert an image in a certain position in a XY Chart. When I use the image properties plot in that he always set the top position to the left of the graphic indicator XY, but I can not resolve to put him at the center of the graph XY. I've attached an example try (you can use any small table you have). Thanks in advance.

  Thank you very much, it works very well!

• How to insert the image in the browser IMAQ instructions

  Hello

  How to insert multiple images in the browser of the IMAQ insert vi. will be taken to image in the folder.

  
  

• How to insert an image in Wordpad?

  Anyone have any suggestions on how to insert an image in Wordpad?

  Thanks in advance for your suggestions

  Hello

  I don't think we can save images in formats RTF...

  What you can do is insert an object (file select Jpg) and fix it with the RTF (Wordpad) documents. Correct me if I'm wrong...

  * I tried to open the RTF (Wordpad files) daughter in MS Word and insert an image, it will save, but not from Wordpad.

  I hope this helps.

• When I insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).

  I use outlook express 6 on windows xp pro.

  When I Insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).
  I did use the option of fixing , I used to Insert.  The reverse also occurs.  When someone using OE sends me an email with
  a peak inside the body of the email, it appears in the box and not in the body of the email. This happens only when they concern the
  my program.  Others using OE does this experience between them.

  My mail sending format is HTML and in its settings, I checked "send pictures with messages. In addition, in the tools of internet explorer, advanced, multimedia.
  I 'send photos' checked also, in the email window, under 'format', ' Rich Text (HTML) "checked.

  I have recently reinstalled cleanly win xp to address a system idle in general.  All updates are in place and tested it with antivirus and anti-malware programs.

  That is what it is?

  [Transferred from Internet Explorer]

  Original title: outlook express

  Tools | Options | Read. Read all messages in plain text it is checked? This it will make become an attachment.

• How to insert an image in a post.

  Have you ever wanted to insert an image in a post so that others can see a pictorial version of what you describe?

  You know what they say.  A picture is worth a thousand words.

  Here are the steps to add a picture to a message:

  1. Get what you want to share open and on your desktop.  Make sure it has No personal information in the box to display.
  2. Click on the Start button and select all programs.
  3. Click on Accessories , then select Snipping Tool.
  4. When you open the capture tool, your office will become pale.  The cursor will resemble a big "plus" sign.  Place the cursor in the upper left corner of the image you want to save, press on and hold down your left mouse button and drag to the lower right of the image and let go of the cursor.
  5. The area in a square between the 2 corners can now be saved.
  6. Save it in a location that is easy to find.
  7. When you reply to this message, there is a button above the message box to insert images.  You can hover your mouse over the buttons to find the correct.  Click it and you can browse and find the image and then insert it in the post.

  

• I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

  I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

  You have Outlook open when you save? You need to close.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update, error! Impossible to update. Code Code 8007045 D 80071 has 91

  Original title: Windows Update, error! Impossible to update.

  I have try the update to have a better PC but it won't allow me because of an error.

  There are 2 errors in fact, which are
  Code Code 8007045 D 80071 has 91
  All 23 updates have an error which are these codes. Help, please!

  I have a 32-bit and I have NO SERVICE PACK! This is the reason why Im trying to get the update!
  I also use Norton 360, the firewall is enabled.

  I have a Windows Vista Home Premium

  http://oi39.Tinypic.com/20qyo2d.jpg

  That link above is the number of KB of all the im trying to install updates.

  Hello

  1. What are the exact error messages?
  2 have you made changes on the computer before this problem?

  The following articles may be useful:
  Error message when you try to install a Windows Update, a hotfix or a service pack after completing the system restore in Windows Vista: "0x80071A91".
  http://support.Microsoft.com/kb/948252
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

• I get an error code 0146 and or the image of exe.bad the logon user interface

  I can't reboot my computer, I keep the error code and get or bad image. I have almost everything and I keep getting the black screen reads LogonUIexe.bad image and when I do the test I get an error code 2000 - 0146.help.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try to start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the verification and startup repair if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• I get an error code whenever I insert disk 2 of 3 recovery disks sent to me by hp... What should I do? I use a hp touch smart desktop? Any idea that can help me solve this problem?

  I get an error code whenever I insert disk 2 of 3 recovery disks sent to me by hp... What should I do?

  Hello

  If you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

  HP support

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  HP Support Forums

  http://h30434.www3.HP.com/