Error 80070641 - re: updates.

Similar Questions

• Windows Update, error: 80070641, Security Update for Microsoft Office system 2007: 2289158 KB

  I had some trouble installing the above update (security for 2007 Microsoft Office system update: KB 2289158). When the update fails, the error I get says:

  Code 80070641 Windows update encountered an unknown error

  When I click on the link below the error that says "get help with this error, a Windows Help and Support window opens with this in the search box:

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"

  I did some research and it seems that this error indicates a problem with the installer, but I tried several proposed fixes and none of them work.  Defective patches include:

  -modification of the parameters of service by Windows install to start automatically and then start it manually, and then try to update

  -With the help of the (Administrator) command prompt to manually start windows update, and then try to update

  -Use of the (Administrator) command prompt to manually stop the windows update, then try to update

  -With the help of the (Administrator) command prompt manually update windows, then rename the files that have been damaged (sorry, I don't know more than what files), and then try to update

  -Disable UAC, then try to update

  -Use of the Download Center Microsoft to download the specific update and try to install.

  What's weird, is that it is the only update with the problem, I can and have installed every update that was shown to me.  Recently manually, I started Setup of windows with the command prompt, then run the update. Later, I tried to stop the service and restart, but the service was already stopped. It seems that the installation of windows service is stopped during the update.

  I'm running a Windows Vista x 86 machine.

  Any help will be appreciated.

  You receive one or more of the following error messages:
  http://support.Microsoft.com/kb/818018/en-us#appliesTo

• Code 80070641 Windows Update encountered an unknown error.

  Windows Vista Home Prem 32-bit version get Code 80070641 Windows Update encountered an unknown error.  In addition, an update of the Adobe Reader keeps fail with the error #1500.
  Any suggestions?

  Hi JimTT,

  A. you are using windows XP, vista or windows 7?

  B. you are trying to install the automatic updates?

  If you use windows XP or vista, you try to run the microsoft Fixit and try again to install updates. You can open the link below and click the Fixit .

  http://support.Microsoft.com/kb/971058

  You can also check out the thread link which addresses the same issue below. Check the suggestion provided by Jared M.  This can help you with updates of Adobe as well as 1500 error is also related to the windows installer.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/446c108b-3222-46F9-AD2C-05dd231fd071

  You can run windows update Troubleshooting If you run windows 7 on your computer.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  update failed error 1500...
  http://forums.Adobe.com/thread/614949

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows error 80070641 updates.

  I checked the updates of the window and the computer said they had 4 important updates and so I picked the ones to download. 3 the four updates downloaded, or so I thought and then I get a screen that says 4 updates failed and he gave me 2 error codes.

  They were as follows:

  80070641

  13EC

  How can I solve this problem?

  I'm not very computer savy so if you could send the instructions in a step by step format.  That would be greatly appreciated.

  Thank you

  Kevin,

  I only see the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/trying-to-update-Windows-error-80070641-code-641/d6fedf33-dc1b-451F-9aab-97429f916180

  Thank you.

• Cannot install the update KB2687407 - error 80070641

  Original title: KB2687407 - error 80070641

  I could install this WU since it was published on 09/12/12.  I have tried the stop/start of service of WU, I downloaded the update on my desktop and tried to install it in this way, I checked the knowledge base and can't find any help that works.  I suspect corrupt s package KB.  Can you get it someone please let me know how to fix this update?  Thank you very much.

  Hello

  Did you of recent changes made to your computer that is causing the problem?

  Method 1: Check out these links to solve the problem of Windows Update:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Method 2: we can use the approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  It will be useful.

• Important updates will be installed not error 80070641, 00000641 codes. Also Hotmail/Outlook Connector will not, improve cannot use Outlook

  9 major upgrades are "pending" and will not install, they show error 80070641 and 00000641 codes.

  Connector Outlook Hotmail message he needs to upgrade. Ran PROGRAM, downloaded data, message "Outlook will close down, install and reboot.

  Outlook closed, impossible to install and has not restarted. Outlook 2007 unusable. Help, please!

  Hello

  Perform the steps from the link below and see if it helps.

  How to resolve problems connecting to Windows Update or Microsoft Update

  Post the issue related to Outlook in the mentioned link below for assistance.

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-Outlook

  Hope this information helps.

• I did not install the updates of the system since May 31, get a code error 80070641 and 641

  I get an error 80070641 and 641 code. When I look in my install/uninstall list, I can't find Windows Installer

  Hi Klaus,

  Have Q: you used any sort of registry cleaner/tuner-top/tweaker?

  If you have, that is why the installation service is 'away' {a registry entry is missing, even if the Setup is still really on your system}.

  See my answer marked as answer here http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/i-cannot-download-the-new-updates-from-may-8-2012/b9b4a982-5b4d-4218-8a47-917515ede136

  Please inform about the results.

  ~ Maurice

• Update error 80070641 install KB2509488, KB2539530 & KB2536413

  original title: Update error 80070641

  I get error 80070641 when I try to update windows Vista.

  KB2509488

  KB2539530

  Kb2536413

  I disabled my Norton Antivirus & Firewall, but the error comes back.

  Can you help me? Thank you

  I get error 80070641 when I try to update windows Vista.

  KB2509488

  KB2539530

  Kb2536413

  I disabled my Norton Antivirus & Firewall, but the error comes back.

  Can you help me? Thank you

  Click Start and type Run

  Click Run and type services.msc

  Click Ok

  If the Office Source Engine service is disabled, double-click it to open the service properties

  Click the startup type list, click Automatic (delayed start), and then click on apply

  Under Service status, click Start.

  Click on apply

  Locate the Windows Installer in the list

  Make sure that the startup type is automatic

  Under Service status, click Start

  Click on apply

  Click OK

• I am trying to download Windows updates but get error 80070641 and 641 codes

  I am trying to download updates and receive the error 80070641 and 641

  Original title: problem downloading of updates

  Hello

   
  1. are you aware of any hardware or software changes, prior to the beginning of the question?
  2. the updates you are trying to install? (Number of KB)?
  3. you try to install the updates manually or Windows updates?
   
  Follow the steps mentioned below and check.
  Method 1: Temporarily disable the security software.
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Method 2: Correct the problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 3: I recommend placing the computer in a clean boot and then try to install Windows updates.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  
  Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
  http://www.Microsoft.com/downloads/en/default.aspx
   
  Reference: the problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
   

• Impossible says windows error 80070641 please help update

  Impossible says windows error 80070641 please help update

  I suggest you follow the steps in the link below and check if it helps:

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018/en-us>

  04/21 / 1110:44: 23 pm

• Impossible to install KB 2597112, 2598292 Ko, Ko 2656368, get code error error 80070641 - 80070641 and 641

  Original title : Install KB 2597112, Ko 2598292, Ko 2656368, are unable error 80070641, Fix, it does not work, tried everything I can find on the Internet and Microsoft

  Latest updates is not installed, receive two error messages, error 80070641 and 641 (assuming they are the same).  I have tried to disable anti-virus and Firewall installation, does not work.  I tried several other methods.  Fix it says we need to fix the update, said it does, but then installation still does not work and get the same error codes.  I have tried using the safe, but the update does not appear in Mode safe.

  Hello RoberBaugh,

  Looks like MSConfig did not return to a Normal startup.

  Use the article had before to open MSConfig and return to a normal startup:

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  In addition, when you are ready, I would you run the clean boot.

  When this is done, run the Fix - It.

  Then go back to a normal start and see how we do.

  Best regards

  Matthew_Ha

• Can not install KB2680317 - get error 80070641.

  I also KB2680317 installation problems.  I always error 80070641.  I tried Microsoft Fixit, download the update manually, perform a clean boot and install the fix KB947821 and verifying the Windows Installer, all nothing is helping.  Is the thing that I can try?  Other recent updates have gone through without problem.

  I also KB2680317 installation problems.  I always error 80070641.  I tried Microsoft Fixit, download the update manually, perform a clean boot and install the fix KB947821 and verifying the Windows Installer, all nothing is helping.  Is the thing that I can try?  Other recent updates have gone through without problem.

  Aside from trying to seek help for the update, have you tried to leave (for works) installation disk in the drive and try to install the update or run a repair or works and then try to install the update?

  http://support.Microsoft.com/kb/2680317

  How to get help and support for this security update

  Help to install updates: Microsoft Update Support (http://support.microsoft.com/ph/6527)

  Local support based on your country: Support International (http://support.microsoft.com/common/international.aspx)

• What can I do about 48 error during the update of the iphone 4S?

  What can I do about 48 error during the update of the iphone 4S?

  Hello! Try the procedure described in section of the Apple Support below:

  Solve the iOS update and restore error in iTunes - Apple Support

• Receive an error message when updating the iPad to 9.2.  What should do?

  Receive an error message when updating the iPad to 9.2.  What should do?

  What is the wording accurate and complete error message? What troubleshooting

  did you?

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.