Windows error 80070641 updates.
I checked the updates of the window and the computer said they had 4 important updates and so I picked the ones to download. 3 the four updates downloaded, or so I thought and then I get a screen that says 4 updates failed and he gave me 2 error codes.
They were as follows:
80070641
13EC
How can I solve this problem?
I'm not very computer savy so if you could send the instructions in a step by step format. That would be greatly appreciated.
Thank you
Kevin,
I only see the answer from here-
Thank you.
Tags: Windows
Similar Questions
-
Impossible says windows error 80070641 please help update
Impossible says windows error 80070641 please help update
I suggest you follow the steps in the link below and check if it helps:
How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018/en-us>
04/21 / 1110:44: 23 pm
-
Photosmart HP 7520: 10 Windows Error Message update for HP 7520
Daily I get this message. This message started when I got a netbook XP approximately 1-1/2 years he is a. I was hoping that this message would have disappeared when I bought my new laptop running Win 10, but it didn't. I don't even have anymore of this printer.
« Il problems were installing updates, but we will try again later. If you keep to see this and you want to perform an Internet search or contact support for further information, this can help:
• Hewlett-Packard - hardware imaging, on the other - Null Fax - HP Photosmart 7520 series - error 0 x 80070490
• Hewlett-Packard - hardware imaging, on the other - Null Print - series HP Photosmart 7520 - error 08024200 b ×"
Until now what I was doing. I went into Device Manager, printers, and I uninstalled it. Then I went into settings, equipment and removed from the appliance.
Upddate messages still appeared.
In Device Manager, I noticed 6 unknown devices listed. When I went in their properties; events; There are mentions making reference to 7520 printer the latest in yesterday something on the installation of the printer. Should I uninstall these too?
I do not know why this error message won't go away since I have no more of this printer.
HelenHello
You simply uninstall the unknown device and the issue of the update of Windows no longer is, it's a reminder of the printer:
http://support.HP.com/us-en/document/c05214529
Kind regards
Shlomi
-
Windows error 0xC800042D updates
I tried a few times to the updates of Windows in my Windows XP Pro. Service Pack 3, I also tried Microsoft Fix It, the results are always the same error 0xC800042D. Could you please help me on this? Thanks to Sebastian Tan.
Sebastian,
Make sure the hour, the date/year & time zone are set correctly
Have you read: (836941) - provides a resolution of problems with a server file, a firewall or proxy HOST settings that block the Windows Update Web site.
The following article might be worth a visit:
You can try the steps in the link:
http://support.Microsoft.com/kb/836941 >>
UTC/GMT is 07:35 Saturday, August 11, 2012
-
Windows error code updates 0x8024400A
Restore my computer to original state. under windows xp, IE8, I can't get the updates, install MSE, install SP3 (click on the link and I get "page you requested is not available), or use FixIt. FixIt tells me that I need SP3 update gives 0x8024400A error code. Help! (PS, I removed McAfee that came with the original OS, but is obsolete)
Download an install SP3 manually:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24Thanks for trying to help me, but I have given up trying to do it myself and leave the Office Tech @ answer do it. It was a big job!
Once again, thank you.
-
When you try to install the windows error message update. 0x80070005
When trying to install the update to windows security get message cannot install. code 0x80070005
Hi jimbo510,
1. did you of recent changes on the computer?
2. update you are trying to install on the computer?
3. do you have security software installed on the computer?
The error message 0 x 80070005 is an access denied message.
Make sure you have logged in as an administrator and try again to install updates.
View update history to know which update is not installing.
(a) open Windows Update by clicking Start , all programsand then click Windows Update.
(b) in the left pane, click view update history.
(c) to view more information about an update, double-click it.
Once you know the update's KB number then visit the Microsoft Download and put the number in the box search, download and install the update manually, check to see if it works.
http://www.Microsoft.com/downloads/en/default.aspx
If you try to install service pack 3 for Windows XP on the computer the error message, refer to the article below and check if that helps.
Error message: "0 x 80070005 access denied. You are not allowed to perform the requested operation. "
-
Cannot install Windows Update error number 80070641 update
original title: little Question on the error 80070641 update number
Hi, I was wondering if someone help cam - I had a windows update to install the-(KB2596785) next, (KB2596843), (KB2596912), (KB2596789) all for microsoft office (2007) and powerpoint, say is there important updates, I looked at things on the net read something where you need to restart RPC or something I am tired still did not work , then I get in this tired tired form and no command prompt and he came back with "specified service does not exist as an installed service" so I came out and I tired deleting cookies ect to see if it worked yet doesn't. He gets to the green as his will happen at the end, then says error windows updates (4) 80070641, tried Microsoft 'DIFFICULTY IT' he says he did also, I retired and he never, so im abit lost on what I could do. I'm not very irritable only do basic stuff. I look forward to your help much appericated
IM on windows vista home prem, Service pack 2
HI BlackSparkle,
System Restore will probably not solve the problem at this stage. Unfortunately, you will need to get their hands on your system manufacturer and ask for a replacement disc from them.
-
I am trying to download Windows updates but get error 80070641 and 641 codes
I am trying to download updates and receive the error 80070641 and 641
Original title: problem downloading of updates
Hello
1. are you aware of any hardware or software changes, prior to the beginning of the question?
2. the updates you are trying to install? (Number of KB)?
3. you try to install the updates manually or Windows updates?Follow the steps mentioned below and check.
Method 1: Temporarily disable the security software.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-softwareMethod 2: Correct the problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 3: I recommend placing the computer in a clean boot and then try to install Windows updates.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 4: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
http://www.Microsoft.com/downloads/en/default.aspxReference: the problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates -
Cannot install the update KB2687407 - error 80070641
Original title: KB2687407 - error 80070641
I could install this WU since it was published on 09/12/12. I have tried the stop/start of service of WU, I downloaded the update on my desktop and tried to install it in this way, I checked the knowledge base and can't find any help that works. I suspect corrupt s package KB. Can you get it someone please let me know how to fix this update? Thank you very much.
Hello
Did you of recent changes made to your computer that is causing the problem?
Method 1: Check out these links to solve the problem of Windows Update:
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
Method 2: we can use the approach 50 / 50 to narrow down the root cause of the problem.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
It will be useful.
-
9 major upgrades are "pending" and will not install, they show error 80070641 and 00000641 codes.
Connector Outlook Hotmail message he needs to upgrade. Ran PROGRAM, downloaded data, message "Outlook will close down, install and reboot.
Outlook closed, impossible to install and has not restarted. Outlook 2007 unusable. Help, please!
Hello
Perform the steps from the link below and see if it helps.
How to resolve problems connecting to Windows Update or Microsoft Update
Post the issue related to Outlook in the mentioned link below for assistance.
http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-Outlook
Hope this information helps.
-
I did not install the updates of the system since May 31, get a code error 80070641 and 641
I get an error 80070641 and 641 code. When I look in my install/uninstall list, I can't find Windows Installer
Hi Klaus,
Have Q: you used any sort of registry cleaner/tuner-top/tweaker?
If you have, that is why the installation service is 'away' {a registry entry is missing, even if the Setup is still really on your system}.
See my answer marked as answer here http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/i-cannot-download-the-new-updates-from-may-8-2012/b9b4a982-5b4d-4218-8a47-917515ede136
Please inform about the results.
~ Maurice
-
Update error 80070641 install KB2509488, KB2539530 & KB2536413
original title: Update error 80070641
I get error 80070641 when I try to update windows Vista.
KB2509488
KB2539530
Kb2536413
I disabled my Norton Antivirus & Firewall, but the error comes back.
Can you help me? Thank you
I get error 80070641 when I try to update windows Vista.
KB2509488
KB2539530
Kb2536413
I disabled my Norton Antivirus & Firewall, but the error comes back.
Can you help me? Thank you
Click Start and type Run
Click Run and type services.msc
Click Ok
If the Office Source Engine service is disabled, double-click it to open the service properties
Click the startup type list, click Automatic (delayed start), and then click on apply
Under Service status, click Start.
Click on apply
Locate the Windows Installer in the list
Make sure that the startup type is automatic
Under Service status, click Start
Click on apply
Click OK
-
On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes
HI MikeGeorgen,
I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.
Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:
Remove and reinstall iTunes and the components of the software for Windows 7 and later versions
Thank you for using communities Support from Apple. See you soon!
-
I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?
I tried also with HP smartstart CD, but failed.Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.
For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557Thank you... -
Do not update Windows (error code 8007005)
Windows do not update. I get the error code 8007005. Eventually Windows is damaged? I have recently reinstalled Windows 7 upgrade (from Vista) when I did it I got an error (no real product Windows) but it is, and product code has been accepted.
This problem will also stop McAfee update also and I uninstalled McAfee as recommended and now impossible to reinstall the software.
Please, any help is needed.
concerning
Philip21
Hello
I'm glad to hear that your problem has been resolved and that Windows works as expected. Thank you for taking the time to share the status of the issue.
Kind regards
Gaurav Prakash - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
iMac (21.5 inch, mid 2011) programs do not fill the screen
My windows does not fill the screen, as in there is a small strip at the bottom of my screen which is my desktop wallpaper (screenshot of control to the footer of this website) any application that I use, I still see a bunch of my wallpaper down. I l
-
How to activate Toshiba face recognition?
Hello! Who can help me with Toshiba face recognition? I can't activate it
-
When editing photos in pictures, the installation of "Sharpness" does not appear to work, even if I take the right of cursor in all. It worked fine in iPhoto. Am I failing to do anything to activate the 'sharpness '?
-
Pavilion dv6 3127tx stucks at startup
IAM using windows 7 (64 bit) with Radeon hd 5600/5700 graphics card. When I turn on my laptop it stucks on welcome screen I noticed it created a folder with name "new folder" on desktop with driver inside files. I moved this folder, but it is created
-
Can someone tell me how to reset a diagram LabVIEW data acquisition card without using MAX Program? After the failure of a test, LabVIEW will leave the reverse PIN. Then, when I run the test again, it will continue to fail unless I have manually clic