ERROR: 98% conversion failed. Unable to find the system volume, reconfiguration is not possible.
Hi all
I am currently using Vmware vCenter Conversion v. 5.0.1 and I tried to convert a local computer running Windows 7 64 bit SP1 Ent two that has three times, but I still got the message indicated in the title.
My local computer has two physical hard disks:
(1) boot HDD (part of the system reserved + part of startup)
(2) data HARD drive, where the user dir is (part)
as I am a noob in Vmware I request assistance. I don't really know how to solve this error.
Thanks in advance!
OK - start the virtual machine in recovery mode or use a collection of Win7 or LiveCD.
After that start is finished to start regedit - select HKLM and then click "load hive".
Select the C:\windows\system32\config\SYSTEM file and give it a name - 'p2v' for example.
Then find HKLM\p2v\ControlSet001\services\LSI_SAS and set the value to 0 initially.
Unload the hive again, then restart
Tags: VMware
Similar Questions
-
Unable to find the system volume, reconfiguration is not possible
Hi all
When I use autonomous Vcentrer of conversion to convert windows 7 PC, I get the following error.
""Cannot find the system volume, reconfiguration is not possible".
I use Windows 7 64-bit PC with PGP encryption.
Please help me to solve this error.
See you soon
Kumar R
No, do not all repair with VSS, because his race for your C: drive
Now the main question: your firmware from the computer's BIOS or EFI (or EFI running in emulation of the BIOS)?
Why I ask: when converter trying to reconfig machine (data is already copied) we found information BCD in place where it is stored to * EFI * machines, seems that it is false BCD and the converter cannot remedy this situation...
As a workaround, you can locate on your source disk folder named EFI (C:\EFI) and rename or delete. (if somehow that this is related with PGP the best choice is to rename the folder).
Then repeat the conversion.
HTH
-
Failed: Could not find the system volume, reconfiguration is not possible
Hi all
When converting to a Server 2003 server to server ESXi 6.0.0 I received this message after all 96%.
(FAILED: could not find the system volume, reconfiguration is not possible. ) )
I use VMware vCenter Converter Standalone 6.1.1
Anyone encountered this problem and found a solution?
The log file is attached.
Thank you very much!
Terence
Your problem is:
2016 05-18 T 11: 09:48.300 + 08:00 WARNING vmware-converter-agent [02332] [sub Originator@6876 = Default] ERROR: [Mntapi_GetFirstBootDisk] more than * a * found active volume. Current active drive #0, another active drive #1
Go to diskmgmt.msc and diskpart.exe and delete active indicator second disk/partition 1
Also, keep in mind that mount point C:\backup\Ext\ is not copied.
HTH
-
Hi, someone would be able to look at these newspapers please and advise, new to VM and trying to convert my old Vista PC before migrating fully to Windows 7, but its failure to 96% with "FAILED: could not find the system volume, reconfiguration is not possible." error.
Thanks in advance, Dave
Make sure your username is Administrator and UAC disabled on your Vista machine. HTH
-
Hello
I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.
Here are the features:
Software: Client VMware Converter standalone 4.0.1
Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1
Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)
VMware farm: ESXi 4.1
Configuration of the converter: http://image.bayimg.com/faackaadc.jpg
I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).
My research, it is likely due to software mirror, implying to dynamic disks.
But I must not modify the physical machine, I have to migrate the computer because it is unchanged.
A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )
I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.
Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg
Attached files: boot.ini and newspapers
What can I do to convert my machine?
Thank you and sorry for my English
=====================================================================================================
Hello
I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.
Here are the features:
Software: Client VMware converter standalone 4.0.1
Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003
Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)
VMware farm: ESXi 4.1
Conversion of configuration: http://image.bayimg.com/faackaadc.jpg
I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).
According to my research, it is probably due to the software mirror, which created from dynamic disks.
Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.
A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )
I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.
Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg
What can I do pour machine to convert my?
Thank you
Have you tried
Try the option "set up the machine" of the converter against the vmx file that you already have.
_________________________VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Help, please - could not find the system volume, reconfiguration is not possible.
I'm trying to P2V a Windows 7 64-bit HP8460p I followed different advice. running as admin, turn off UAC, decrypted the drive hard, etc., and I still get the "cannot find the system volume, reconfiguration is not possible" error.
I don't know I'm missing something stupid. I have attached the newspapers; any help would be greatly appreciated.
I had to delete the partition 'System reserved' to make it work.
-
Now you have another problem with Windows 7 Home Premium. I am not able to do the system restore. It gives error 0 x 81000203 when I press the system protection option in the properties of my computer window. Any body solve this problem. I checked the services like cliché, CPP are working properly. Because of this error, I am unable to anytime upgrade to Ultimate edition. Help, please!
Here's the Instant link that displays the error.
[IMG] http://i43.tinypic.com/zioqdg.png [line]
Hard
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com -
Windows is unable to find a system volume that meets its criteria for installation
I have a dell 15 Inspiron 4 GB of ram and I tried to downgrade to 8.1 Vista out of a usb port and I format the ntfs volume and I attribute to c: drive I have sata ahci mode and I get error windows cannot find a system volume that meets its criteria for installation, I checked the forums and found nothing I need help.
Hello
You are missing a piece of the model number
But you will find that Dell does not support Vista on the Inspiron 15 models, nor provide Vista drivers for them.
Stay with 8.1 that Windows 7 would be the BONE earlier, you could install on it.
http://www.Dell.com/support/home/us/en/19/product-support/product/Inspiron-15-3521/drivers/advanced
BIOS
Ubuntu 12.04Windows 10, 64-bitWindows 7, 64-bit8.1 Windows, 64-bitSee you soon.
-
I also 80070490 error codes and C355. I used CCcleaner to clean my registrys and used the system preparation tool. I regularly use spybot search and destroy for malware protection and search for viruses with my anti-virus program. What should I do? Thank you.
BHO. DLL & IE3SH problems on my computer starts?
http://answers.Microsoft.com/thread/ffbe5016-84d9-47E0-8303-43419c1abba5 -
Could not locate the system volume
I have a very similar problem that has been published before; However, the posted solution worked.
I can't find in the newspapers, what is actually wrong. If anyone can help, I'd appreciate it.
"Then the conversion of a server to ESX 3.5 Server 2003 I received this message after only 95% complete.". Failure of the Reconfiguration of the error. With the State: FAILED: could not find the system volume, reconfiguration is not possible.
I use VMware vCenter Converter Standalone 4.0.1"
Newspapers reported the following errors (which are equivalent):
Impossible to reconfigure a source that doesn't have a system volume
converter.fault.ReconfigurationNoSystemVolumeFault
It seems that there are 2 physical disks in the system
> Drive:
. \PhysicalDrive0 a type of adapter: 1> Drive:
. A type of adapter \PhysicalDrive1: 1Converter is to see the C:\ as long as the system volume, but there is no active flag set on it. The second disc is recognized, but according to it's Converter:
> is a dynamic volume. No significant partition information may be associated with him
So, it looks like there's a mirror of software on the source physical system or the original system was dual boot between something like Windows 2008 and 2003 Server.
If it's a mirror of the software, you can:
-remove the mirror and conversion
-Use gparted on the virtual machine to set start-up/active at the first vmdk file flags, and then reconfigure the virtual machine via converter
If it is a dual-boot configuration, then I do not think that it is supported.
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
"Unable to make the system restore point", when I ran registry cleaner Norton
I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.
I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.
I don't know what prompted to run registry cleaner. I would sincerely say that you read the following article first before you take back this terrible task to play with the registry.
Why you should not run registry cleaner:
http://www.edbott.com/weblog/?p=643Here is the tutorial on how to create a system restore point:
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlt-4-2
-
Error message - unable to find the proxy server - how can I solve this problem
When I try to enter some sites I get the error message: unable to find the proxy server, Firefox is configured to use a proxy server that is not found. It happened all of a sudden and I don't know why or how I can fix it, it does not help that most help site are blocked. I'm using a Mac 10.5.8 and Firefox 15.
Set not to use any proxy.
Firefox> Preferences > Advanced > network > setting > don't score no proxy
-
IKE initiator unable to find the policy; Outside INTF, CBC: error
I have a Cisco ASA 5505 having a tunnel at a remote office. I just put in place another identical to another tunnel and when I followed the VPN in ASDM I see that the VPN is active. But I can't ping through it. When I check the logs I see "IKE initiator unable to find the policy; Outside INTF, CBC:... "Nobody knows what might be the cause? Here is a copy of the configuration. Thank you.
See the config of bdavpn1 #.
: Saved
: Written by admin in 17:54:11.823 HAA Monday, June 7, 2010
!
ASA Version 8.2 (2)
!
hostname bdavpn1
domain.com domain name
activate the encrypted password of OSaXLnYQKkAcBhYA
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
192.168.2.100 IP address 255.255.255.0 ensures 192.168.2.101
!
interface Vlan2
nameif outside
security-level 0
IP 101.17.205.116 255.255.255.1018 Eve 101.17.205.117
!
interface Vlan3
nameif dmz
security-level 50
IP 172.20.0.1 address 255.255.255.0 watch 172.20.0.3
!
interface Vlan4
Failover LAN Interface Description
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 91
!
interface Ethernet0/3
switchport access vlan 3
!
interface Ethernet0/4
switchport access vlan 3
!
interface Ethernet0/5
switchport access vlan 4
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone AST - 4
clock to summer time recurring ADT
DNS domain-lookup dmz
DNS server-group DefaultDNS
Server name 172.20.0.99
domain.com domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network Chicago-nets
object-network 10.150.1.0 255.255.255.0
object-network 10.150.55.0 255.255.255.0
object-network 10.150.56.0 255.255.255.0
object-network 10.150.57.0 255.255.255.0
object-network 172.16.1.0 255.255.255.0
object-network 192.168.26.0 255.255.255.0
object-network 10.150.111.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.4.0 255.255.255.0
object Group Chicago-nets
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.4.0 255.255.255.0
object Group Chicago-nets
the DM_INLINE_NETWORK_3 object-group network
object-NET 172.20.0.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
the DM_INLINE_NETWORK_4 object-group network
object-NET 172.20.0.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
outside_cryptomap to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_1 object-group
inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 DM_INLINE_NETWORK_2 object-group
inside_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 172.20.0.0 255.255.255.0
inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_3 192.168.4.0 255.255.255.0
inside_nat0_outbound list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
Note to access list outside_to_dmz allow access to the citrix Server
outside_to_dmz list extended access permit tcp any newspaper HTTPS host 101.17.205.123 eq
dmz_to_inside allowed extended access list host 172.20.0.2 ip 192.168.2.0 255.255.255.0 connect
Note to outside_access_in entering of Citrix access list
outside_access_in list extended access permit tcp any host 101.17.205.123 eq https
outside_2_cryptomap list extended access allowed object-group ip DM_INLINE_NETWORK_4 192.168.4.0 255.255.255.0
pager lines 101
Enable logging
timestamp of the record
logging paused
logging buffered information
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP verify reverse path to the outside interface
failover
primary failover lan unit
failover failover lan interface Vlan4
failover interface ip failover 172.16.30.1 255.255.255.252 watch 172.16.30.2
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 625.bin
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
Global interface (dmz) 2
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
static (dmz, external) 101.17.205.123 172.20.0.2 netmask 255.255.255.255
Access-group outside_access_in in interface outside
Access-group dmz_to_inside in dmz interface
Route outside 0.0.0.0 0.0.0.0 101.17.205.115 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
LOCAL AAA authorization command
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
redirect http outside 80
SNMP-server host inside 10.150.1.177 community survey * version 2 c
SNMP-server host inside 10.150.2.38 community survey * version 2 c
location of Server SNMP Hamilton, Bermuda
SNMP Server contact René Bouchard
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
inside
redirect http outside 80
SNMP-server host inside 10.150.1.177 community survey * version 2 c
SNMP-server host inside 10.150.2.38 community survey * version 2 c
location of Server SNMP Hamilton, Bermuda
SNMP Server contact René Bouchard
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map3 1 match address outside_cryptomap
outside_map3 card crypto 1jeu peer 101.88.182.189
outside_map3 card crypto 1jeu transform-set ESP-3DES-SHA
card crypto game 2 outside_map3 address outside_2_cryptomap
outside_map3 crypto map peer set 2 101.1.95.253
card crypto outside_map3 2 the value transform-set ESP-3DES-SHA
Crypto map outside_map3 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
outside_map3 interface card crypto outside
Crypto ca trustpoint bdavpn1
Terminal registration
domain name full bdavpn1.domain.bm
name of the object CN = bdavpn1.domain.bm, OR = Ltd, O is domain, C = US, St is of_confusion, L is Hamilton,[email protected] / * /
Configure CRL
Crypto ca certificate card domainincCertificateMap 10
name of the object attr cn eq sslvpn.domain.com
Crypto ca certificate chain bdavpn1
certificate ca 00
30820267 308201d 0 a0030201 02020100 300 d 0609 2a 864886 f70d0101 04050030
32310b 30 09060355 04061302 5553310 300 b 0603 d. 55040 has 13 41 53311430 04414c
12060355 0403130b 63612e61 6c61732e 636f6d30 35303130 31303630 1e170d39
3335 30313031 30363031 31395 has 30 32310 b 30 170d 3131395a 09060355 04061302
300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
06092a 86 4886f70d 01010105 0003818d 00308189 819f300d 636f6d30 6c61732e
c19012ed 02818100 4cf67378 c9347162 2bcf6519 a3ab748f 1c9cae07 5c232c93
8a 625638 68416412 and 55808768 412675bc 5906ba4a 3ffd1d101 303d0ea7 d559ccf8
0d425ffc edf1cee8 337ca5c7 5f718f2d 081551f8 fc742b78 8866de9b c82310b0
89975e30 7ea7f047 bf518ac3 aa2dfd7e f93b1016 7d5261ea 34f18fa7 748d52c8
7595ecb3 02030100 01a3818c 30818930 1 d 060355 1d0e0416 0414c1ab b8651761
fc3f12d1 b132322e be36ff6a cecb305a 0603551d 23045330 518014c 1 abb86517
61fc3f12 d1b13232 2ebe36ff 6acecba1 36 has 43430 32310b 30 09060355 04061302
300b 0603 55040 5553310d has 13 04414c 41 53311430 12060355 0403130b 63612e61
6c61732e 636f6d82 0100300c 0603551d 13040530 030101ff 300 d 0609 2a 864886
f70d0101 818100ad 04050003 1d558eab 05d50f7b b656e2c4 213a9ac3 1cecee73
0251f931 0b47e84f f3c0847e b2168562 d27330b3 72c8023f b83aeb4a 2db8fbf7
f4575c8e c56300aa 6d5b0fd3 092e7747 76 76286 26e81b3e 4ca35b71 792380b 9
ca480932 c58a8ee6 2fa62a73 aa1d209d 68662c 59 0b8a71f1 c2db0cbb 5aefc8c5
bedcbda7 caf46f0c b01def
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
crypto ISAKMP ipsec-over-tcp port 10000
Telnet 0.0.0.0 0.0.0.0 inside
Telnet 0.0.0.0 0.0.0.0 outdoors
Telnet timeout 120
SSH enable ibou
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 60
Console timeout 0
management-access insidea basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
prefer NTP server 192.168.2.116 source inside
NTP server 192.168.2.117 source inside
bdavpn1 point of trust SSL outdoors
WebVPN
allow outside
enable SVC
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
LtdAdmin XRlF3jA1k3JEhNgr encrypted privilege 15 password username
domainadmin encrypted E1zLpTPUtBADN9og privilege 15 password username
tunnel-group sslvpn.domain.com type ipsec-l2l
sslvpn.domain.com group of tunnel ipsec-attributes
validation by the peer-id cert
trust-point bdavpn1
tunnel-group 101.88.182.189 type ipsec-l2l
IPSec-attributes tunnel-group 101.88.182.189
pre-shared-key *.
tunnel-group 101.1.95.253 type ipsec-l2l
IPSec-attributes tunnel-group 101.1.95.253
pre-shared-key *.
tunnel-Group-map enable rules
Tunnel-Group-map domainincCertificateMap 10 sslvpn.domain.com
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 10101
ID-randomization
ID-incompatibility action log
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the icmp
inspect the icmp error
inspect the amp-ipsec
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:a23ada0366576d96bd5c343645521107Scott,
When you check the status of the two tunnels of the CLI, check the following:
HS cry isa--> of his watch as active or QM_IDLE
HS cry ips his--> shows the packages encrypted/decrypted
The second tunnel does not properly come upwards, should ensure that policies correspond to the two ends of the tunnel.
If this second tunnel is started but does not traffic, we might have a problem NAT or routing.
Federico.
-
Unable to find the component with an absolute reference
Hello
I have an RESP search page that has an LOV attached to the name of responsibility search column.
The page works fine on my Jdev, when I transfer the files on the server and click on the page I get error below.
«oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException: unable to find the component with an absolute reference = / win/oracle/apps/win/respmap/lov/webui/RespNameVORN, XML Path = null.» Please check that the reference is valid and the definition of the component exists on the file system or in the MDS repository. »
The LOV RN xml is present in the location on the server. The page has been imported successfully, verified using jdr_utiils.print_document.
I was impossible to import LOV RN xml using XML importing, throwing below error.
< row 2, column 45 >: XML-20112: Error (fatal error) opening external DTD 'jbo_03_01.dtd '.
WARNING: Could not find the level of customization of document value ' / victory/oracle/apps/victory/respmap/lov/Server/RespNamesVO.
No Protocol: jbo_03_01.dtd
The Oracle note Doc ID 848851.1 said you should not import the xml of region LOV separately, it is imported with page.
Please help me to solve this error.
Thank you
Kalai
Kalai,
km1612 wrote:
Command used with import error.
---------
$ oracle.jrad.tools.xml.importer.XMLImporter java /DEVL/apps/comn/java/classes/win/oracle/apps/win/respmap/lov/server/RespNamesVO.xml - username *-password *-dbconnection "(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = *)(PORT=***)) (CONNECT_DATA = (SID = DEVL)))" rootdir - / DEVL/apps/comn/java/classes-rootdir/DEVL/apps/comn/java/classes
----
Your LovRN file is /win/oracle/apps/win/respmap/lov/webui/RespNameVORN.xml
Not /win/oracle/apps/win/respmap/lov/server/RespNamesVO.xml
If please change the XMLImporter with the correct file and try again.
See you soon
AJ
-
Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.
I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode.Help, please
Thank you
Vishal.your profile folder is a subfolder of C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\ and something like < randomstring > .default label - folder chrome with the userChrome.css file must go in this folder .default < randomstring > .
Maybe you are looking for
-
What exactly does the Time Machine backup?
What exactly does the Time Machine backup? We have a Mac Pro towers (NOT for sale) and Mac mini with several hard drives installed internally. Time Machine backup all internal disks or just the boot disk? This can be configured?
-
Apple financial (TDF Canada) access account?
Anyone know of a way online to access those TDF account? For now we can access by telephone old method via 1-866-508-6312. Of course payments can be made through banking online with Apple TDF (+ account number) as beneficiary, so one might think tha
-
Compaq Presario SR1214NX desktop PC: update BIOS for SATA HDD?
Hi CV Experts. In 2004, I bought a HP Compaq Presario SR1214NX desktop PC. Now, leave the original hard drive and I bought a new Seagate 500 GB SATA hard drive. I thought that this would work because the PC MoBo has two SATA connectors. After install
-
Why nidevldr service of starts not reliable?
nidevldr service does not (always) start after the reboot. We run TestStand 4.2.1 on Windows 7, 32 bit. National Instruments mDNS service starts after the restart, but stops shortly after. As we understand it, the mDNS NOR should be started so that n
-
Microsoft visual c ++ runtime library error after installing Quick Books 2003
I installed QB 03 with the straight CD rom on the box and after it restarted, I tried to open the program from the desktop and then I got this error. Please please help me... Y at - it a free software out there that can clean my laptop? or something