Error: A general error occurred: failure

Similar Questions

• Impossible to apply settings of resource of DRS on host (reason: a general error occurred: failure). This can drastically reduce the effectiveness of the DRS

  We have a group of 10 hosts working ok for months. Last week, we get the error

  Impossible to apply settings of resource of DRS on host (reason: a general error occurred: failure). This can drastically reduce the effectiveness of the DRS

  on one of the hosts.

  looking to restart the hosts but not sure this could cure the problem.

  Have you tried the steps in this KB?

  Application of parameters of DRS to an ESX host generates an error (1004667)

• FAILED: A general error occurred: unknown exception

  Hello
  When I try to convert and join physical machine to VMware ESXi Server Infrastructure I got this error: "FAILURE: a general error occurred: unknown exception.
  There are status "Race" at the moment (but does not show percentage bar) and then "A FAILED" is displayed.
  I've added screen captures and logs as an attachment.
  Please help me

  Youe error is

  2012 04-25 T 11: 34:31.195 + 02:00 [info 01340 'Default'] [, 0] Vmount library: 2 error while opening the control device of the driver VSTOR2

  Try to uninstall and clean install the converter 5.

  If the error occurs again, check the status of the pilot VSTOR: "sc qc vstor2-mntapi10-shared '.

• FAILED: A general error occurred: poweron vm has no

  Hello

  I am trying to create a virtual machine from a physical server fails at 1% compared to VMware vCenter Converter Standalone client with the error:

  FAILED: A general error occurred: poweron vm has no

  Vmware-converter-server-1 log contains the following (lines last 30 or more) below.

  I found a few topics on this error, but they do not work, such as assigning a static IP address above using DHCP.

  Environment:
  VMware Server - ESXi 4.1
  Physical machine - RHEL 5.5
  VMware vCenter Converter Standalone client, version 5.0.0 Build-470252

  Any help is greatly appreciated.

  JOURNAL:

  2012 03-20 T 13: 24:20.570 - 04:00 [info 02452 "Default"] connection to the host on port 443 usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.570 - 04:00 [info 02452 "Default"] at localVersion is: vim.version.version7
  2012 03-20 T 13: 24:20.616 - 04:00 [info 02452 "Default"] remote version is: vim.version.version6
  2012 03-20 T 13: 24:20.632 - 04:00 [info 02452 "Default"] root user authentication
  2012 03-20 T 13: 24:20.648 - 04:00 [info 02452 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2012 03-20 T 13: 24:20.663 - 04:00 [info 02452 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.710 - 04:00 [info 02452 ' vmomi.soapStub [57]'] adapter heel of reset for Server TCP:usmar - bldvmsvr02:443: closed
  2012 03-20 T 13: 24:20.710 - 04:00 [info 02452 "Default"] created a new element of Scheduler with id = '12', firstTimeToRun = '2012-03-20 13:24:20.570', source ' ', targetRPOInMinutes = '0 '. -__thiscall Converter::Server:Scheduler:SchedulerItemImpl: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/schedulerItemImpl.cpp:87")
  2012 03-20 T 13: 24:20.710 - Planner element 04:00 [info 02452 "Default"] with id = '12' created - __thiscall int Converter::Server:Scheduler: ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/priorityQScheduler.cpp:49")
  2012 03-20 T 13: 24:20.710 - 04:00 [02464 "Default" info] point 12 hourly Planner to run at time = 13:24:20.710 2012-03-20. -Sub __thiscall Converter::Server:Scheduler:SimpleScheduler:Run (void) ("d:/build/ob/bora-470252/bora/sysimage/ufad/server/scheduler/simpleScheduler.cpp:109")
  2012 03-20 T 13: 24:20.741 - 04:00 [info 02484 "Default"] connection to the host on port 443 usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.741 - 04:00 [info 02484 "Default"] at localVersion is: vim.version.version7
  2012 03-20 T 13: 24:20.788 - 04:00 [info 02484 "Default"] remote version is: vim.version.version6
  2012 03-20 T 13: 24:20.788 - 04:00 [info 02484 "Default"] root user authentication
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ComputeResource for vim. HostSystem: ha-host is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ResourcePool to vim.ComputeResource:ha - computer-res is vim. ResourcePool: ha-root-pool
  2012 03-20 T 13: 24:20.820 - 04:00 [info 02484 "Default"] ComputeResource for vim. ResourcePool: ha-root-pool is vim.ComputeResource:ha - computer-res
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 'Default'] data center for vim.ComputeResource:ha - computer-res is vim. Datacenter: ha-datacenter
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 'Default'] folder root VM vim. Datacenter: ha-datacenter is vim. File: vm-folder-ha
  2012 03-20 T 13: 24:20.835 - 04:00 [info 02484 "Default"] reuse existing connection of VIM to usmar-bldvmsvr02
  2012 03-20 T 13: 24:20.866 - 04:00 [info 02484 "Default"] scheduled timer cancelled, succeeds StopKeepAlive
  2012 03-20 T 13: 24:20.866 - 04:00 [info 02484 ' vmomi.soapStub [58]'] adapter heel of reset for Server TCP:usmar - bldvmsvr02:443: closed
  2012 03-20 T 13: 24:20.913 - 04:00 [00360 info 'Default'] [task, 338] [task-12] - BEGIN - convert
  2012 03-20 T 13: 24:20.929 - 04:00 [00360 "Default" error] Found dangling SSL error: [0] error:00000001:lib (0): func (0): reason (1)
  2012 03-20 T 13: 24:20.945 - 04:00 [info 02484 "Default"] Started task 'task-12' for job = ' job-12 ", item = '12' - __thiscall Sub Converter::Server:Job:JobProcessorImpl:StartProcessingJobs (void) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:383").
  2012 03-20 T 13: 24:20.945 - 04:00 [00360 info 'Default'] [taskSpec, 467] task [12] [TaskMap] - 12:task - 23
  2012 03-20 T 13: 24:20.991 - 04:00 [01044 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded
  2012 03-20 T 13: 24:20.991 - 04:00 [info 01044 ' vmomi.soapStub [55]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 "Default" error] [task, 350] [LRO] Unexpected Exception: vmodl.fault.SystemError
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [task, 379] [task-12] - ERROR - convert: vmodl.fault.SystemError
  -> (vmodl.fault.SystemError) {}
  -> dynamicType = < unset >
  -> faultCause = (vmodl. NULL in MethodFault),
  -> reason = 'poweron vm impossible. "
  -> msg = ""
  ->}
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 267] retrieved taskInfo for ' converter.task.Task:task - 12 "mapping to" converter.task.Task:task - 12 "."
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 307] the task with id = 'task-12' proved to be a task 'recent '.
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 321] no existing group of newspaper found to task with id = "task-12. The task is still 'young' so a bundle of newspapers going now is assigned.
  2012 03-20 T 13: 24:28.429 - 04:00 [00360 info 'Default'] [diagnosticManager, 790] recovery job related diagnostic for the tasks of server with id = "task-12.
  2012 03-20 T 13: 24:28.429 - 04:00 [01036 info "Default"] passage work 0 'job-12' completed with an error. -struct Converter::Server:Job:JobExecutor:SchedulerUpdateSpec __thiscall Converter::Server:Conversion: ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/conversion/conversionJobExecutorImpl.cpp:405")
  2012 03-20 T 13: 24:28.444 - 04:00 [01036 info "Default"] suspended 1 elements of Planner for employment (job-12) - __thiscall Sub Converter::Server:Job:JobProcessorImpl:SuspendJobAux(const_class_Converter::Server::Job::InternalJob_&,class_Converter::VdbConnection_&) ("d:/build/ob/bora-470252/bora/sysimage/lib/converter/server/job/jobProcessorImpl.cpp:828")
  2012 03-20 T 13: 24:28.601 - 04:00 [00360 info "Default"] ConverterConnection: KeepAlive timer cancelled, StopKeepAlive succeeded
  2012 03-20 T 13: 24:28.601 - 04:00 [info 00360 ' vmomi.soapStub [59]'] adapter reset for server PIPE:\\.\pipe\vmware-converter-worker-soap heel: closed
  2012 03-20 T 13: 24:28.601 - 04:00 [warning 00360 ' vmomi.soapStub [59]'] termination invocation: moref=vmodl.query.PropertyCollector.Filter:session[5264bd60-de17-d6f4-e798-cb998a3233ed]52f3406e-964c-dea1-c23e-6f30439c2a81 method, server=PIPE:\\.\pipe\vmware-converter-worker-soap = destroy
  2012 03-20 T 13: 25:17.849 - 04:00 [01708 info 'Default'] [diagnosticManager, 343] generate Converter.Server log bundle with no job log.
  2012 03-20 T 13: 25:17.849 - 04:00 [01708 info 'Default'] [diagnosticManager, 370] generate Converter.Server bundle of newspaper.

  "CheckLicenses: ha-license-manager doesn't have a power control.

  This clearly indicates the reason for failure are missing licenses. It may be the number of processors which is not taken in charge or any other resource, not the number of virtual machines under tension.

  Kind regards

  Plamen

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• Error indicating: "failure Naming or remove file C:/Program Files (x 86) \EA Games\ Command and Conquer Generals\English.big" on Windows 7

  Install the game itself works fine, but when I try to download the patch I get this error stating: "failure Naming or remove file C:/Program Files (x 86) \EA Games\ command and Conquer Generals\English.big" does anyone know how can I fix? I want to because I want to install zero hour as well and run mods.

  Thank you

  Hello AaronS.,.

  The question you have, are related to the game and should be better in the EA forums, I suggest that you post your question on the EA forums. You can check out the link below to ask your question:

  http://Forum.EA.com/eaforum/categories/list.page

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• EvalError: General Photoshop error occurred.

  It is news to me.

  I've just updated my working copy of Photoshop CC to the latest version (my personal home version seems to work very well) and trying to use export file › plans of work for files... I get the following error message

  EvalError: General Photoshop error occurred. Maybe this feature is not available in this version of Photoshop.

  -Could not complete the command because the file was not found.

  Does anyone has an idea what is the cause and how do I work around it?

  Thank you

  No luck with a reinstallation I fear. It is still giving me the same error message when I try to export files, work plans.

  EvalError: General Photoshop error occurred. Maybe this feature is not available in this version of Photoshop.

  -Could not complete the command because the file was not found.

  But it seems to have solved the issue now, there's a smart vector that came not coupled to the original file, I rasterised it and export started working.

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• Hello! I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure. What can I do?

  Hello!

  I work with the Director 12, Windows 7. A fatal error occurred during my attempt to chance the script police. Now this fatal error occurred whenever I start the Director. I shut down the system and tried again, even failure.

  What can I do?

  Save the relevant keys, then search your registry at HKCU\Software\Adobe\Director\12\Script

  If this does not help, save the entire branch and try to delete it

• An error occurred when taking a snapshot: failure to suspend the VM.

  Hello

  I use vCenter 5.5 with vSphere WEB GUI to take a snapshot of a RHEL 5.4 32 basic VM on a 5.5 ESXi.  When I choose the "suspend the comments file system" instead of the "memory of the virtual machine snapshot", the creation of the Snapshot failed 90% with "an error occurred when taking a snapshot: failure to suspend the virtual machine.

  I have no problem using the 'snapshot of the virtual machine memory' option to create the snapshot.

  Your help is appreciated

  Ren Wong

  It is a bug in kernel in RHEL 5.4.  Thanks to all who helped.

  https://Bugzilla.redhat.com/show_bug.cgi?id=539328

• A general error occurred: unknown internal error

  I'm trying to convert the remaining two vm on my server Hyper-V 2012. I am a physical to virtual conversion of a slot machine tension because the converter 5.5 does not support Hyper-V 2012. The virtual machine is the two 2008 R2 server, one is an Exchange Server and the other is a domain controller.

  I have 2 ESXi hosts connected to a vCenter server. I tried to remove the vCenter ESXi host and just conversion using the IP addresses, which did not work. I also tried using the credentials of a local administrator on the server.

  I've already converted two other vm without any problems, so I don't know why I'm running sharply in issues with the latter two.

  Attached are the concerned exported logs. I see where the error occurs, but I can't understand why it's a failure. Other people with similar problems appear to have firewall, DNS, or disk errors. I don't seem to make the same mistakes that I've seen others get.

  OK, I need the log of the agent-converter machine you're trying to convert.

  I see error 3 (the system cannot find the path specified).

  2014 02-17 T 14: 14:42.645 - 07:00 [info 01980 "Default"] error 3 opening disk ha-nfcssl: / / [ESX1-DATA] Camnet-Exch.camnet.local/ Camnet-Exch.camnet.local.vmdk@CAMNET-ESX1: 902! 52 93 e1 this 67 dc this f8 f2-64 ca 6 d 1 c 3 d c9 94.

  Check your access to CAMNET-ESX1 port 902 of the computer on which the converter is installed?

  Also try running the converter user interface "as Administrator", then try again.

  HTH

• vSphere device instant Reversion fails: A general system error occurred: could not remove change tracking file

  Many people, I'm a little in the soup this time!

  My goal is to improve of vSpere 5.0 to 5.5 has. I have the new device ready to go, but the old device just not show me the upgrade tab. Because I had already taken a snapshot, I thought that I would give to the 'update' a go. Then I changed my mind and tried to go back to the snapshot and received the error in the title:

  A general system error occurred: could not remove the file change tracking.

  I wonder if there is a difficulty, I can try to get back to a good functioning device 5.0 before I retry upgrade - or if I should just set up my new 5.5 a device from scratch. I use only 3 guests on more Essentials.

  Thanks for all the tips!

  If he has only 3 guests, I will deploy a 5.5 device costs.

  Concerning

  Girish

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• Unrecoverable error occurred when receiving data - response failure via network

  Hi all

  Remote system went from VSOS (Windows Env) SOA SUITE (Linux).

  They swapped the IP/dns of the old and the new server.

  Followed when they try to access a service at our end...

  We receive an error in ulog as:

  102850.stageserver! GWTDOMAIN.8448.4.0: LIBGWT_CAT:1071: WARN: failure of the list control to access for local service MEM01 control

  102850.stageserver! GWTDOMAIN.8448.4.0: LIBGWT_CAT:1043: ERROR: fatal error occurred while receiving data - response failure via network

  Local domain:

  ISWTC01

  GWGRP = TDOM

  TYPE = TDOMAIN

  NETWORKID = ISWTC01

  CONNECTION_POLICY = ON_STARTUP

  SECURITY = NONE

  Remote domain:

  OSB6_MS1 TYPE = TDOMAIN

  NETWORKID = OSB6_MS1

  MTYPE = "DRUNKS".

  OSB6_MS2 TYPE = TDOMAIN

  NETWORKID = OSB6_MS2

  MTYPE = "DRUNKS".

  Local services:

  MEM01

  LDOM = ISWTC01

  remote service:

  MEM01

  RNAME = PIPSRV01

  LDOM = CSERVER (our local OSI domain)

  RDOM = DEV (our remote area of OSI)

  INBUFTYPE = 'CARRAY '.

  OUTBUFTYPE = 'CARRAY '.

  We have not changed anything, but the remote system. Please help me understand: This could be a problem due to the WTC config remote system... What's wrong?

  Also why this MTYPE used?

  Thanks in advance.

  Kind regards

  Deb

  Hello Deb,.

  Since there is no use of access control in the dmconfig above I guess that it's a mismatch in the config.XML to accesspoint/accesspointid.

  No doubt when they changed their VSOS SOA they changed their AccessPointId Local de OSB6_MS1, OSB6Ms2 to have more than one meaning SOA

  (for example, SOA_MS1 or SOA_MS2). Just check that there is a consistent naming between WTC LDOMs/RDOMs with Tuxedo RDOMs/LDOMs.

  MTYPE is a variable to improve performance for encoding/decoding (host-network, network-host). Since your domain Local is not defined

  It is not used. Ok.  It should not be used when a local Tuxedo domain communicates with a remote domain of WTC. Encoding/decoding must be enabled.

  Kind regards

  Bob Finan