vSphere device instant Reversion fails: A general system error occurred: could not remove change tracking file

Similar Questions

• Migrate the virtual machine fails - "a general system error occurred.

  I have a host in my cluster which I am unable to migrate all the machines. Migration always fails at 13% with the error "a general error has occurred: There is no message after the colon. In tasks and events, I see the following under events:

  • "Migration error" warning: a SNMP trap was sent
  • Alarm "migration error" [name of the VM] action
  • Alarm "migration failure" changed from gray to gray
  • Cannot migrate to [NEW HOST], [STORAGE]

  The substantive test on the list is the first.

  VCenter is version 5.5 and ESXi is 5.1 on the source host and destination.

  The lack of information in the error message let me very well what to do next. It is a cluster of production so I'd like some suggestions that don't involve slaughter the hosted VMs. thanks in advance for your help.

  Take a look at this KB: KB VMware: VMware ESXi 5.x host stops responding when you try a vMotion migration or a configuration change

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• A general system error occurred after the P2V conversion

  Hello

  I have trouble starting a virtual machine right after P2V with VMWare Converter4.3 conversion.

  My infrastructure is ESXi-4,1 to connect using vSphereClient.

  The material is: Dell Power Edge T310 - 64-bit; 4 GB of Ram; CPU intel Xeon 2.4 GHz 4 cores per socket.

  Already running 2 VMs - MS Server 2 K 8 64-bit, DC and File server.

  Just added one more VM workstation XP Pro 32-bit and the cant restart it. Error I get is: a general error occurred: the virtual machine could not be started.

  any help with it?

  It uses IDE or SCSI controller?  If IDE, I'd do the conversion again and move the SCSI controller

  See also

  http://KB.VMware.com/kb/1033243

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• How can I fix my registry on my windows XP system? ___I get error: ___Windows could not start because the file is missing or corrupt: __\WINDOWS\system32\config\SYSTEM___I had this error of windows once today and am not sure what to do for a fix.

  I have a Dell Inspiron 5100.

  I tried searching for a solution on what to do, but am confused about what I should do or what would be the best way.

  I found this site: http://support.microsoft.com/kb/307545 and it listed a process, but was told not to use this method "If your computer has an OEM operating system . I have not installed the operating system, so I guess it's OEM.

  Listed on the page (the page of the link I gave above) it says ago guided help. What is a safe way to fix my registry XP installed OEM?

  I really don't know what to do or how to do it. Any help that could be provided would be great.

  I did some research on your problem and found the following MS link it describes your problem and how to fix your luck problem
  http://support.Microsoft.com/kb/314477

• Same material, cannot vmotion.  Stops at 13% with a general system error occurred: invalid argument.

  I have four IBM (now Lenovo) x 3550 M4 (7914AC1) hosts that have been purchased by groups of two, several months apart.  Those purchased at the same time can vmotion between them but they cannot vmotion with those bought later OR with one of our older infrastructure (Nehalem IBM level - x 3650 M3, M3 x 3550, etc.).  The most recent M4 can talk to the fine old hosts.  Can I migrate invited powered down.

  VMware support was not able to give any help on this matter and have lost instead of my time (including do not contact me for weeks and also current exit without changing to another engineer; manager failed in this regard, too).

  I pulled the material apart - I can say it's all the same material (looks the same, has the same numbers and RUF).  The machines were configured the same.

  Firmware isn't exactly the same thing on the material but is VERY close.  I have one of each generation updated with the same Xpresspacks of IBM, and so except for the image diagnosis of pre-start, I think that they are the same.  I'll check this again once then.

  VMware drivers are the same.  They were not.  They are now.  I got 5.5 latest drivers for everything that I can find a driver for (including cards CF - using the driver Qlogic native VMware NICS (igb); approx 10 GB (not being use IGB but fact still); the provider CIM, MegaRAID controller.  I used VUM update their last 5.5 (standard license) with all the patches.  vCenter is a 5.5 vCSA was last updated.  I went into the BIOS settings side-by-side and ensured that everything is the same.  I did the same thing with everything I could think of in vSphere (found about 5 differences, but nothing fixed).

  Management is the network of vMotion.  It's on the same VLAN as one of those guests are on (the clients are spread over 5 different VLAN).  VMware support put in place a different vSwitch for vMotion with no luck.

  The symptoms are the same regardless of their orientation (old to the new, new to the former) and don't care about the type of virtual machine (Windows 2008R2, CentOS 5.5, RHEL 6.7) or at the level of the material (VM 10 or 7 VM).  It also fails if it is standard or high priority or if it is with the web client or the Windows client.

  The place with the most characteristic symptom that doesn't show anywhere in googleland except to the pastebin is in the file /scratch/log/hostd.log of the host.  The host that sends the guest throws a vmsvc.vm error VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument.

  If anyone else has seen this (obviously someone because it is on pastebin) and understood, please enlighten me.

  Thank you!

  Jeff

  These are the two hostd.log files (most recent, from the host first, then older receiver host).

  -----------------------

  From Server hostd.log:

  -----------------------

  2016 04-18 T 20: 16:29.927Z [37501 B 70 verbose "Default" opID = user F2241F42 - 000018 D 1-64-1 b = vpxuser] AdapterServer: target ='vim. VirtualMachine:2', method = "refreshStorageInfo".

  2016 04-18 T 20: 16:29.956Z [37501 B 70 'Hbrsvc' verbose opID = F2241F42 - 000018 D 1-64-1 b user = vpxuser] Replicator: VmFileProviderCallback VM (id = 2).

  2016 04-18 T 20: 16:29.972Z [37501 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:29.978Z [37280 B 70 'Local' verbose opID = cb7f34c4 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:29.992Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:29.993Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"

  2016 04-18 T 20: 16:30.002Z [37280 B 70 verbose 'Vimsvc.ha - License-Manager' opID = cb7f34c4 user = vpxuser] load: existing file loading: /etc/vmware/license.cfg

  2016 04-18 T 20: 16:30.014Z [37280 B 70 verbose opID "Default" = cb7f34c4 user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)

  2016 04-18 T 20: 16:30.172Z [35981 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="prepareSourceEx"

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] PrepareSourceEx [1461010590046389], VM = '2'

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info "Vcsvc.VMotionSrc (1461010590046389)" opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionEntry: migrateType = 1

  2016 04-18 T 20: 16:30.172Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] JrnlCreate: created 1461010590.14

  2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] Transition State (VM_STATE_ON-> VM_STATE_EMIGRATING)

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73

  2016 04-18 T 20: 16:30.172Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstVmDirPath / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/.

  2016 04-18 T 20: 16:30.172Z [info 37280 B 70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx ' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstVmFileName =guestvm.mydomain.edu.vmx

  2016 04-18 T 20: 16:30.173Z [37280 B 70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] SetVmdbVirtualDeviceChange: deviceChange # 0

  SIOC: SIOC is not notified to start the injector

  2016 04-18 T 20: 16:30.173Z [37280 B 70 verbose opID ' Vcsvc.VMotionSrc (1461010590046389) "F2241F42 - 000018 D 1-64-a2-71 = user = vpxuser] Migration changed state from NONE to BEGIN

  2016 04-18 T 20: 16:30.173Z [37280 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] finished scheduling PrepareSourceEx [1461010590046389].

  2016 04-18 T 20: 16:30.173Z [' info 36591 B 70 ' vm: / vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7 /guestvm.mydomain.edu/guestvm.mydomain.edu.vmx "] disconnect the current control.

  2016 04-18 T 20: 16:30.173Z [FFA4FB70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target ='vmodl.query.PropertyCollector:ha - property-collector ", method = 'createFilter'"

  2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389] 'a': error - 6: invalid argument

  2016 04-18 T 20: 16:30.174Z [info 372C1B70 ' Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx '] VMotionCmdCb [1461010590046389]: prepare the job completed with error vmodl.fault.SystemError

  2016 04-18 T 20: 16:30.174Z [372C1B70 verbose 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx"] VMotionCmdCb: shooting ResolveCb

  2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: VMX reports needsUnregister = false for migrateType MIGRATE_TYPE_VMOTION

  2016 04-18 T 20: 16:30.174Z [372C1B70 info ' Vcsvc.VMotionSrc (1461010590046389) "] ResolveCb: failed with error: {(vmodl.fault.SystemError)

  -> dynamicType = < unset >

  -> faultCause = (vmodl. NULL in MethodFault),

  -> reason = "Invalid Argument."

  -> msg = ""

  ->}

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] Migration changed State to BEGIN done

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] called finished

  2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] State of Transition (VM_STATE_EMIGRATING-> VM_STATE_ON)

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hostsvc' verbose] change of State received for VM ' 2'

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] entered VmPowerStateListener

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Guestsvc.GuestFileTransferImpl' info] successful VmPowerStateListener

  2016 04-18 T 20: 16:30.174Z [37280 B 70 'Hbrsvc' info] Replicator: powerstate change VM: 2 old: 1 new: 1

  2016 04-18 T 20: 16:30.174Z ['Hostsvc' 372C1B70 info] decremented SIOC injector Flag2

  2016 04-18 T 20: 16:30.174Z [372C1B70 "Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx" info] VMotion finished cleaning

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: writes active = 0

  2016 04-18 T 20: 16:30.174Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlEnd: finished journal

  2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] /var/lib/vmware/hostd/journal/1461010590.14 [JrnlFilePersistenceProvider::DeleteJournal] removal.

  2016 04-18 T 20: 16:30.175Z [verbose 372C1B70 "Vcsvc.VMotionSrc (1461010590046389)"] JrnlDelete: deleted journal

  2016 04-18 T 20: 16:30.175Z [37280 B 70 'Hbrsvc' verbose] Replicator: Remove only group no entry for VM (id = 2)

  2016 04-18 T 20: 16:30.180Z [37501 B 70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] AdapterServer: target='vmodl.query.PropertyCollector.Filter:session[574b3c38-6a6b-214e-4bf3-428b10abded9]52760c3e-4722-159c-5c3a-df6eb23ddbbc ", method = 'destroy'

  2016 04-18 T 20: 16:30.201Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:30.207Z [372C1B70 verbose 'Local' opID = 44d5f9ee user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:30.223Z [37501 B 70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:30.224Z [372C1B70 verbose opID "Default" = 44d5f9ee user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.162Z [35981 B 70 verbose 'SoapAdapter"] responded to the request of the State of service

  2016 04-18 T 20: 16:31.314Z [35981 B 70 verbose opID 'Default' F2241F42 - 000018 D 1-64-a2-b7 = user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeSource"

  2016 04-18 T 20: 16:31.314Z [37501 B 70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-b7 user = vpxuser] CompleteSource [1461010590046389]

  2016 04-18 T 20: 16:31.320Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:31.326Z [35981 B 70 'Local' verbose opID = 8590ebdf user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:31.340Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:31.342Z [37501 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] AdapterServer: target ='vim. LicenseManager: ha-license-manager ", method = 'GetLicenses'"

  2016 04-18 T 20: 16:31.356Z [35981 B 70 verbose 'Vimsvc.ha - License-Manager' opID = 8590ebdf user = vpxuser] load: existing file loading: /etc/vmware/license.cfg

  2016 04-18 T 20: 16:31.371Z [35981 B 70 verbose opID "Default" = 8590ebdf user = vpxuser] ha-license-manager: validate-> valid license found for "VMware ESX Server 5.0" (lastError = 0, desc.) IsValid:Yes)

  -----------------------

  Hostd.log of the reception host:

  -----------------------

  2016 04-18 T 20: 16:29.798Z [FFD35B70 'Hostsvc.DvsManager' verbose] called PersistAllDvsInfo

  2016 04-18 T 20: 16:30.245Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:30.251Z [29940 B 70 'Local' verbose opID = ac976ee5 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:30.265Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:30.267Z [29940 B 70 verbose opID "Default" = ac976ee5 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 verbose opID "Default" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] AdapterServer: target ='vim.host.VMotionManager:ha - vmotionmgr ", method ="completeDestination"

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 info 'Vcsvc.VMotion' opID = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination [1461010590046389]

  2016 04-18 T 20: 16:31.412Z [2BAC2B70 WARNING opID "Vcsvc.VMotion" = F2241F42 - 000018 D 1-64-a2-e5 user = vpxuser] CompleteDestination: card not found

  2016 04-18 T 20: 16:31.417Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'GetPerfCounter'"

  2016 04-18 T 20: 16:31.424Z [29940 B 70 'Local' verbose opID = fa72f2f7 user = vpxuser] Default resource used for "counter.vsanDomObj.writeThroughput.summary" planned for the module "perf."

  2016 04-18 T 20: 16:31.439Z [FFD35B70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. HostSystem: ha-host ", method = 'retrieveInternalCapability'"

  2016 04-18 T 20: 16:31.441Z [29940 B 70 verbose opID "Default" = fa72f2f7 user = vpxuser] AdapterServer: target ='vim. PerformanceManager: ha-perfmgr ", method = 'queryPerfCounterInt'"

  Using IPv6 on new hosts? If so, try disabling:

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.eduvmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare (1461010590046389): sending "to" srcIp = 10.10.6.108 supporting = 10.10.6.73, type = 1, encrypted = false, remoteThumbprint = 28, 5 C: C3:9 C: 3E:BA:79:EA:B5:19:CC:A9:36:34:C1:10:48:46:F0:0E

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = srcLoggingIp

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: = dstLoggingIp

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: srcMgmtIp = 10.10.6.108

  2016 04-18 T 20: 16:30.172Z [37280 B 70 info 'Vmsvc.vm:/vmfs/volumes/526aca09-9e531e90-b07b-e61f135547a7/guestvm.mydomain.edu/guestvm.mydomain.edu.vmx' opID = F2241F42 - 000018 D 1-64-a2-71 user = vpxuser] VMotionPrepare: dstMgmtIp = 2620:91:0:96:73

• VM does not start: general system error

  Hello

  I have run 4 VM via vmware server 2 on a Windows Server 2008 R2 host.

  Yesterday for no reason like my 50 GB of free space on the partition where the virtual machine is stored suddenly disappeared.  Several of the files in the directories VM had balooned to new heights.  My virtual machines have been crushed this morning.

  Nevertheless, I moved 1 VM to a fallback server, clear up a lot of space.

  Now, all but 1 of my VM will start.  I get an error:

  Power on Virtual Machine did not finish: a general system error occurred: unable to connect to the virtual machine

  Windows Journal says: unable to connect to VMX: E:\Virtual_Machines\servername\servername.vmx

  I'm a little uncertain as to where are my logs from VMware, and cannot can't find a deinitive answer to this.

  I have a suspicion that I am maybe more space disk on the Windows Partition in the virtual machine itself, is it possible?  That would force the latter to start anymore?

  Any help is appreciated.  I scoured the net to find answers, but found little, and what I had to do with Linux issues, that I don't have.

  'Remove' will leave your VM to the point that it is now by the merger of the snapshot file and the disk basic together, which is the intensive part of the disc. After the end, you will have some snapshots (Server 2.x allows only a single shot) and therefore no possibility to return to when the snapshot was taken originally.

  It seems that the disk subsystem should be at the height.

  Could you temporarily attach a (slow) external network or USB device and copy all the vmdk files just in case something bad happens? Don't mean to scare you - it will almost certainly ok, but only in the case (in function of the importance of the data in the virtual disk are, of course).

• VM Converter 5.5 general system error has occurred

  Hello

  I have a problem using vm 5.5 converter to convert a physical Windows 2003 SP2 machine in virtual machine. The vm converter is installed on the computer that I want to convert. When I run the conversion I'll get an error a general system error occurred: unknown internal error.

  I tried restarting the server and restart the conversion, but it did not work.

  The log file is attached.

  Hello

  I think the upgrade to R2 is a drastic measure and you should consider the impact before making the decision to do so. I don't recommend it at this point.

  You have multiple system drives that you want to convert? (C:\, D:\, etc.) ? If so, try to convert the C:\ just to see if the converter process works. I don't know what role the server has, but if other drives are just you might plan to the image of the disc or copy of the separate data later (if it works).

  I might suggest if the above does not work, we can clean all the VM converter from your source machine files manually, restart the server and try the process 5.1 new converter itself. (Something could be let go 5.5 installation or now stuck).

  Good luck trying that!

  Ryan

• HP Mini 110: the password test failed CNU9256w50 fatal system error

  I tried to turn it on after a few months of use do not, and this password thing came, but I have no idea what is the password. Please help me

  password check failed CNU9256w50 fatal system error

  @Dooguie

  Enter: e9lo7qgdq1 (3rd character is a lowercase L)

  Kind regards

  DP - K

• backup error "attempt to copy to disk"C:\" "failed. An unknown error occurred (-54). »

  When syncing iPhone 6 running iOS 9.3.1 I get the following error message: "attempt to copy to disk"C:\" "failed. An unknown error occurred (-54). »

  I am running iTunes 12.3.3.17 on a 64-bit Windows 7 Pro computer. I am logged in as administrator. The laptop has 8 GB of RAM and 700 + GB of available disk space.

  It seems to be synchronization of contacts and the calendar correctly, but the local backup fails.

  Does anyone have a solution for this?

  Thanks for your help.

  Help with error 54 here > If you see the error-54 when you synchronize with iTunes

• Age of Empires 2: Age of Kings does not work on Windows 7. The error is: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  I can't get my Age of Empires 2: Age of Kings drive on my computer.

  It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.

  What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.

  Help, please!

  What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.

• "Error 1402.Could not open key" during the installation of Adobe and HP update. Updates failed and earlier of the software cannot be put back in place because permission to modify the key is denied.

  • Issue: Failed to update and previous software may not be returned to or re-installed. Problem programs include Adobe Reader and scan and editor for my HP C4180 all-in-1 photo printer.
  • (For example) error messages:
    Error 1402.Could not open key:
    UNKNOWN\Components\1FA18F797...
    Check that you have sufficient access to that key, or contact your support...
  • No recent changes, with the exception of updates failed and normal widows.
  • I thought bad updates from HP and Adobe has caused the problem, so I uninstalled and tried to re - install the software several times, hoping a release update would solve the problem.  Impossible software returned to or re-installed, so I bought try 'PDF Converter 6' to to access PDF files. This program could not be installed for the same reason.

  The Windows 7 FAQ has reported that Windows 7 could be reinstalled everything keeping the settings. The same can be done with Vista? If not, is there a safe way to delete these keys, so the software can be installed/re-installed without having to make a facility 'clean '?

  Thank you.

  Hi misterDormie,

  This problem may occur if the permissions to a specific key in the Windows registry has been denied because the registry is corrupted or due to registry permissions

  I suggest you try the following steps:

  Step 1: Check with a different user profile

  If you do not have a different user account, you will need to create a (see link below).  If everything works fine with a different user profile, you can infer that the user profile is damaged, click on the link to find out how to solve this problem.

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  If the problem persists,

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps mentioned in the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• EvalError: General Photoshop error occurred.

  It is news to me.

  I've just updated my working copy of Photoshop CC to the latest version (my personal home version seems to work very well) and trying to use export file › plans of work for files... I get the following error message

  EvalError: General Photoshop error occurred. Maybe this feature is not available in this version of Photoshop.

  -Could not complete the command because the file was not found.

  Does anyone has an idea what is the cause and how do I work around it?

  Thank you

  No luck with a reinstallation I fear. It is still giving me the same error message when I try to export files, work plans.

  EvalError: General Photoshop error occurred. Maybe this feature is not available in this version of Photoshop.

  -Could not complete the command because the file was not found.

  But it seems to have solved the issue now, there's a smart vector that came not coupled to the original file, I rasterised it and export started working.

• Sample SDK error. Could not load the module on vsphere-client/globalview-ui/locales/globalview-ui-en_US.swf resources.

  I add the service global services and global services-user interface on the server of virgo and start the server.

  When I access vsphere web client, I get an error:

  Could not load the module on vsphere-client/globalview-ui/locales/globalview-ui-en_US.swf resources.

  I add the program chassisRackVSphere, I got the same error.

  Is there something wrong? What should I do for this?

  Please read the FAQ and tutorial doc in the Directory SDK docs, it's a typical error when you forget to compile the resources in your project file.