Error about Texas Instrument Flash Media Device Equium series
The below mentioned is the real problem & I'm not able to find a solution in the sites mentioned, can you help me?
Problem caused by Texas Instrument Flash Media Device
This problem was caused by a compatibility issue between Windows Vista and Texas Instrument Flash Media Device.
Texas Instrument Flash Media Device is generally distributed by the company that manufactured your computer.
Note: If you purchased Texas Instrument Flash Media Device from a retailer and installed yourself, you will need to contact the manufacturer of the device media Flash of Texas Instrument.
Recommendation
To find out if a solution or an updated version of the Texas Instrument Flash Media Device is available, go to your computer manufacturers online Web site.
Texas Instruments incorporated
Hello
just a little tip: it s better to just explain because it is difficult to manage with just an error s. explain these things as how you installed your operating system (recovery or from scratch with the installation of all the drivers subsequently), under what circumstances you have encountered this message, what you did or didn't see this message If the error is reproducible and so on.
Clarify and explain more precisely with more details because I and other users will be able to help you more effectively out of your problem.
Welcome them
Tags: Toshiba
Similar Questions
-
I just installed recognition speech dragon, but when I try to open this msg of error says "cannot find media device - Hosea t check if your computer has a sound card or if the wave multimedia component is missing from the sound card.» my monitor has built-in speakers and I can listen to music, news, etc.
You have a microphone? He is looking for an INPUT device, not a one OUTPUT. Also, check device manager to make sure that you have not a driver problem. To get the Device Manager, click Start and right click on computer, then click Properties. Click Device Manager, and then look for entries with? or! beside them, which indicates a driver problem. Finally check that your microphone is plugged in the right place on the computer, unless it is based.
I hope this helps. Good luck.
-
Concern about Google ending Flash Media
I am a student in game design. Last semester, I took a Flash class, which was focused on the art. This semester, I enrolled course Flash script. However, I have a few more days to move to another course.
Here is my concern. I read yesterday that Google has finally pulled the plug on the Flash support. If I realize that I can publish my games in a wrapper HTML with Flash CC, I don't know what that means. The wrapper HTML means that others will be able to run my games in the Google browser, even if they have not installed Flash Player? It's a waste of time and money to continue his studies of development Flash? What do you experts?
Here is the article that I am referring:
Thank you in advance for your help!
A.D.
Hi andradare,
Neither Chrome nor Firefox have pulled support of Flash Player. The latest version of Flash Player works fine in both browsers. Flash Player is integrated into the Chrome Installer (ChromeOS). No changes to this are planned.
Flash is a tool for a great animation, video and game tool (as well as many other uses, including education and the company.) It is installed on systems billions, and in my opinion, is the most universal software ever created. The content that you create in the class is almost guaranteed to work on systems of office around the world. If you are using Adobe AIR, you will be able to publish this content of the Android and iOS app store targeting billions of mobile devices.
Chris
-
Hello
- I am trying to build a mobile application that uses a webcam, chat text / audio. The web cam and the text chat works very well with me, I even tried the White Board and it worked. Once I tried to add the Audio portion, I got this error:
"Error #1014: class flash. media::MicrophoneEnhancedOptions is not found. .
at com.adobe.rtc.clientManagers::MicrophoneManager/get selectedMic() [/ users/smagee/flashfarm/to connect/cocomomobile/src/com/adobe/RTC/clientManage rs / MicrophoneManager.as:169]... »
I tried several file swc but still getting the same error. Any help or advice how to fix this problem?
- Is there that a Mobile SDK version will be release soon?
Thank you very much
Suha
Hi, Suha
As the release notes State, you're compiling to AIR 2.7. I think that
the error you see is the result of targeting AIR 2.6.
See the instructions provided useful here:
http://forums.Adobe.com/message/3847495#3847495
(Note also that you must add the following to your Flex compiler settings):
-swf-version = 12
Thank you
Sasha
-
Hello
With the help of adobe there are many talk FAC and taste for FAC codes.
I downloaded the flex 4.5 sdk, AIR SDK 2.6, which are more recent built. Installed Flash player 10.3 and AIR runtime 2.7 release candidate.
Using the following code for the supression of the echo:
var mic:Microphone = Microphone.getEnhancedMicrophone ();
MIC = Microphone.getEnhancedMicrophone (0);
var options: MicrophoneEnhancedOptions = new MicrophoneEnhancedOptions();
options.mode = MicrophoneEnhancedMode.FULL_DUPLEX;
options.autoGain = false;
options.echoPath = 128;
options.nonLinearProcessing = true;
mic.enhancedOptions = options;the following error occurs also in version Web, but also the version of AIR.
I have included the playerglobal.swc in the version of applications in the frameworks\libs\player\10.3 folder
In both cases it gives the following error:
***********************************************************************************
[SWF] AudioChatClient_1.swf - 2 683 701 bytes after decompression
typecheck AudioChatClient_1 / startPubishing)
outer-scope = [global object$ flash. events::EventDispatcher$ flash. display::DisplayObject$ flash. display::InteractiveObject$ flash. display::DisplayObjectContainer$ flash. display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ spark.components.supportClasses::SkinnableComponent$ spark.components.supportClasses::SkinnableContainerBase$ spark.components::SkinnableContainer$ spark.components::Application$ spark.components::WindowedApplication$ AudioChatClient_1$]
[AudioChatClient_1 ~ [O] * [A] * [[A]] {} ()
0:debugfile 'D:\ECLIPSE_WORKSPACE\FLASH_BUILDER\AudioChat\src; AudioChatClient_1.mxml ".
[AudioChatClient_1 ~ [O] * [A] * [[A]] {} ()
2:debugline 54
[AudioChatClient_1 ~ [O] * [A] * [[A]] {} ()
4:getlocal0
[AudioChatClient_1 ~ [O] * [A] * [[A]] {} (AudioChatClient_1 ~ [O])
5:PushScope
[AudioChatClient_1 ~ [O] * [A] * [[A]] {AudioChatClient_1 ~ [O]} ()
6:pushnull
[AudioChatClient_1 ~ [O] * [A] * [[A]] {AudioChatClient_1 ~ [O]} (null [O])
7: force flash. media::Microphone
[AudioChatClient_1 ~ [O] * [A] * [[A]] {AudioChatClient_1 ~ [O]} (flash. media::Microphone [O])
9:setlocal1
[AudioChatClient_1 ~ flash. media::Microphone [O [O]] * [[A]] {AudioChatClient_1 ~ [O]} ()
10:pushnull
[AudioChatClient_1 ~ flash. media::Microphone [O [O]] * [[A]] {AudioChatClient_1 ~ [O]} (null [O])
11: flash. media::MicrophoneEnhancedOptions force
VerifyError: Error #1014: class flash. media::MicrophoneEnhancedOptions is not found.
to AudioChatClient_1 / __pub_btn_click () [D:\ECLIPSE_WORKSPACE\FLASH_BUILDER\AudioChat\src\Audi oChatClient_1.mxml:144]***************************************************************************************
My terms of reference are:
OS: Microsoft Windows XP SP3
Intel Core 2 duo processor with 2 GB of RAM
Flash Builder 4.0
If possible could you provide information of AIR 2.7 SDK
Thank you
Sekhar Rana kamareddine
Thank you Eli
Project > properties > additional compiler arguments
-swf-version = 12
Really saved my request.
-
Error #1065: Flash. media::SoundCodec Variable is not defined.
Hello
Since I moved to 0.91 SDK, I have error recurring when I launch a second instance of my application on the same PC, for testing purposes:
ReferenceError: Error #1065: flash. media::SoundCodec Variable is not defined.
at com.adobe.rtc.clientManagers::MicrophoneManager/get selectedMic() [C:\work\main\connect\cocomoPlayer10\src\com\adobe\rtc\clientManagers\Microp honeManager.as:160]
at com.adobe.rtc.clientManagers::MicrophoneManager/set _1703516469micIndex() [C:\work\main\connect\cocomoPlayer10\src\com\adobe\rtc\clientManager s\MicrophoneManager.as:126]
at com.adobe.rtc.clientManagers::MicrophoneManager/set micIndex() [C:\work\main\connect\cocomoPlayer10\src\com\adobe\rtc\clientManagers\Microphon eManager.as:122]
at com.adobe.rtc.clientManagers::MicrophoneManager() [C:\work\main\connect\cocomoPlayer10\src \com\adobe\rtc\clientManagers\MicrophoneManager.as:81]
at com.adobe.rtc.clientManagers::MicrophoneManager$/getInstance() [C:\work\main\connect\cocom oPlayer10\src\com\adobe\rtc\clientManagers\MicrophoneManager.as:93]
at com.adobe.rtc.sharedManagers::StreamManager/findCodec() [C:\work\main\connect\cocomoPlayer 10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1864]
at com.adobe.rtc.sharedManagers::StreamManager/onUserRemove() [C:\work\main\connect\cocomoPla yer10\src\com\adobe\rtc\sharedManagers\StreamManager.as:1851]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at com.adobe.rtc.sharedManagers::UserManager/userRemoved() [C:\work\main\connect\cocomoPlayer 10\src\com\adobe\rtc\sharedManagers\UserManager.as:1020]
at com.adobe.rtc.sharedManagers::UserManager/onItemRetract() [C:\work\main\connect\cocomoPlay er10\src\com\adobe\rtc\sharedManagers\UserManager.as:920]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
to com.adobe.rtc.sharedModel::CollectionNode/ http://www.adobe.com/2006/connect/cocomo/messaging/internal:receiveItemRetraction () [C:\wo rk\main\connect\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:758 ]
to com.adobe.rtc.messaging.manager::MessageManager/ http://www.adobe.com/2006/connect/cocomo/messaging/internal:receiveItemRetraction () [C:\wo rk\main\connect\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:678 ]
at com.adobe.rtc.session.managers::SessionManagerBase/receiveItemRetraction() [C:\work\main\c onnect\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:341]
The strange thing is that I'm working on an application that does not use the microphone. I use only a simple SharedModel to share tables.
No idea where that might be?
AxelHello
SoundCodec class is defined in Player 10. You use the Player 10 swc afcs? If so, you must change require Flash Player Version unser project-> properties-> Flex compiler in Flex Builder and that 10.0.0 and also ensure that your browser has player 10 and Flex SDK supports also the player 10.
If you use afcs 9 CFC, then put 9.0.124 or something in the Version requires Flash Player and that should fix the problemThank you
Hironmay Basu -
Hello
I have an Office Smart Touch of All - in - One HP Envy 23-d060qd; It's a very nice system and it is running Windows 8.1; connected to one of the two ports USB3.0 is a Seagate drive upward.
I have a chronic problem that has quickly become very tedious. At least once a day, for no apparent reason, the sysem disconnects the drive on which is pinned to the USB 3.0, reporting the 43 error when I run the Device Manager. The system has an expandable controller of Texas Instruments USB 3.0-0096 (Microsoft) and it has a driver version 21/02/14: 6.3.9600.17031.
I read that he knows the problem and that it has something to do with USB3.0.
Can anyone help!
Thank you very much
Finally, problem got resolved when Microsoft released a updated driver
Thank you
-
I have a gateway C - 140 X for a good 2 years and I find always the best of the class. The current version is Windows Vista Ultimate Edition. The upgrade path should be got Windows 7 Ultimate, which, incidentally, should some sort of reduction but I understand he must make an economic profit.
I ran the Windows 7 Upgrade Advisor Beta .
Report all gave his go-ahead, but one Texas Instruments PCIxx12 Integrated FlashMedia Controller by Texas Instruments Inc. device is not compatible with Windows 7. So I can't upgrade once the device is compatible.
The obvious answer is to consult the website of the manufacturer of Texas Instruments or gateway OEM.
The gateway OEM does not help because it has stopped supporting once he sold to MPC, which then went bankrupt while the drivers are available on the gateway site to download only for Windows Vista.
Looking at the site of Texas Instrument is a maze leading to difficulty finding support on the device in question. I'll try to contact the support from them, but what do I do? I mean the device is able to run Vista and other Texas Instruments products are compatible but just the card reader.If you tell me to new contact the third party or the manufacturer's website, then I ask that you give me the link to the support or the driver.
I tried to control the Windows 7 Compatibility Center , but it is not upward.
I got it.
After the upgrade from 32-bit Windows Vista Ultimate 64 bit of Windows 7 Ultimate that required me to do a clean install. I prefer clean install because it is sure that everything works. Yet once I was pounded by an unmanned aircraft. In the hardware Manager, he has been shown as a mass storage controller. I forgot my card reader and more worried about trying to get the driver for the mass storage controller because it seemed important to something. Then I let down, but after a few days, I looked around the same instance in the forums which turns out be my card reader. I went back to the drivers from the website of the gateway for card reader Driver .
I just installed the Vista driver and now it works. Everything on my computer now works with Windows 7 64 bit by going to manufacturers for devices. Broadcom Bluetooth.
Wired and wireless from Intel.
Mass of Intel storage.
The rest was from Windows Update, check all out them.The only thing I feel crazy is that send to Onenote 2007 is not compatible with 64 bit OS and the strength to wait for the next version of Office for it to work.
-
Texas Instruments OHCI Compliant IEEE 1394 Host Constroller - cannot be enabled
Texas Instruments OHCI Compliant IEEE 1394 Host Constroller (for i-link) is disabled and I have / windows can't activate.
This is the first time I tried to use it and did not notice the errors to do with it in the past.
Is this option enabled by default on new machines. The only thing I can think of that could have affected via my use is by Norton. In the contrary case, the laptop is a new.
Someone else knows what - all assistance. Thanks.M
May I ask what laptop you have, what OS you are using, and what exactly you want to do?
Thanks ;)
-
I tried several times to install the security update for Windows Media Encoder 9 Series for Windows Vista. It downloaded, but everytime I try to install it about half way through the installation it is said that it was cancelled and I got 6 b 9 error Code. I can download and install other updates without any problem.
Hi Ms. Morrill,
Welcome to Microsoft Windows Vista Forums.
You can use the tool it Fix to reset Windows Update components using the link below:
http://support.Microsoft.com/kb/971058/en-us
After this step, try to install the update and if you get an error and then try to install mode safe
To enter in safe mode follow the steps below:
1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.
Click the click the button Start the arrow next to the button lock , and then restart.
2. do one of the following:
· If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
· If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.
3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).
4 log your computer with a user account with administrator rights.
For more information follow the link below:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
You can try to install the update mode without failure and the link is the following:
Hope this information is useful.
Suresh G
Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: 7pouces arm mini netbook.
http://CGI.eBay.com/7-mini-NetBook-N...item2eb4dc32b7
http://shop.eBay.com/i.html?_FROM=R4...all-categories
I want to get a mini netbook to carry on a trip just to watch videos youtube and check eamil, browse the web and stuff simple office.
These have some ARM processors.
comes with windows ce 6.0
they are all good?
I also try to reinstall another OS (bone of the arm) about it because I've heard bad things about windows that preference I'd like put android on it or some other linux operating systems. I want to assure you that I can watch videos youtube and flash media?
can you guys recommend me something small and portable?
BTW: normal netbooks are too expensive. just want to buy something cheap and portable works.Hello
You can use your favorite search engine and searching for mini laptop computers including the system configuration will support Linux or Android and also serve the purpose.
In addition, you can contact the manufacturer of the equipment you wish to purchase to ensure compatibility with all other software options you can pursue.
Hope the helps of information.
-
Impossible to play a sound in the CAR Flash Media Player when it is connected.
Original title: RCA TH102 256 MB Flash Media Player
I can't get my computer to play sounds. He won't play the sound of the computer or my Altec Lansing computer speakers. The computer program to solve a problem, says that everything works and even my speakers work.
The program to make my computer work speaking to her, rose and I chose to not use it. Could it have something to do with it. ? I checked for the update on programs and updates on drivers and they all come back indicating that everything works well. I'm puzzled.JLHello
1. have you made changes on the computer before this problem?
2. is it works much earlier?
3 is the issue limited only with Flash Player?
4. are you able to hear the sound of the computer?
Try to connect the device to a different USB port, if it does not. Check with the other computer.
Run the fixit available in the link below and check if that makes a difference
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Hope the above information is helpful.
-
Error reading of disks: Windows Media Player has encountered a problem while playing the file
Im having a prob. with my Media Player, everthing was working fine until about 15/04/2010.
Im having a prob. with my media player from vista, everthing was working fine until about 15/04/2010. then all I get when I put a disc that worked before the time this message (Windows Media Player encountered a problem while playing the file. For any additional help, click Help on the Web.)
any thoughts?
Hello SUNCITYDAVIS,
· Remember to make changes to the computer (hardware or software) before having this problem?
· Do you get this error during playback of all media files or any size of file in particular?
· This happens when you play multimedia files stored on your computer as well?
The error indicates that there could be some missing codecs for the file format, you are trying to play with Media Player.
You can see the article that will give you information about the codecs:
http://www.Microsoft.com/windows/windowsmedia/player/FAQ/codec.mspx
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title:
Windows 7 no sound at all
Hello
I would like to ask help for Win 7 problem 'No audio '.
I have a Win 7 64-bit Professional desktop PC. It has a motherboard Asus P5Q - EM.
Previously, everything worked very well over a year, but now there is no sound at all. I see a little red x in addition to the speacer icon.I got a craphics card problem and it has been replaced, and shortly after, I didn't notice that no audio problem.
First of all, I tried to fix the external audio card drivers - no help. Then I thought to use the motherboard
audio only and removed the external audio card. I have cheked Bios that there is audio compatible motherboard.
Windows Manager device shows Audio Realtek High Definetion. (Once I reinstalled externally
audio card, but did not get it to work and I deleted again and focused on getting the Audio motherboard
work.)Through the Device Manager, I uninstalled the device Audio from Realtek motherboard and all other audio related devices and start the PC.
After you start Windows 7 detects audio devices well and tries to install the drivers but still said the driver installation failed.I also used the troubleshooter in Windows 7. According to the material and audio, I clicked on the audio playback troubleshooting. The system has tried to install the drivers, but all have failed in similar way as after rebootig.
When I go to see the Audio the Realtek High Defenetion properties, it says:
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)I downloaded the latest drivers (some 54 Mb file called: 64bit_Vista_Win7_R267) Realtek www-site and run it, but no help. Same problem - no sound at all.
If I run application system information and go to the "components" > "Problem Devices", it is said Realtek High Definition Audio, error code: failure using the VxD loader. It is also noted on the VAN Miniport (IKEv2), error code: this device does not work properly because Windows cannot load the drivers required for this device.
I also unplug the beam of the motherboard front audio jack. I thought it may create a connector related issues, but he did not make a difference.
If I ask the system to update the driver using Device Manager, it says that the piloted is up-to-date.
I checked the details Realteck Sound Device in the Device Manager and it says under the number "Problem code" 13.
Also other devices under device 'Video controls and sound game' managers do not work. I uninstalled all the. After reboot Windows 7 detects all the. Win 7 tries to install the drivers, but always fails and yellow! singing appears next to all devices.
Under the NIC in Device Manager there is another device with the yellow! sign as well. The WAN Miniport (IKE v2). I don't know if it has something to do with this audio problem? Win 7 detects it as well after uninstalling and tries to install drivers after the start, but is also always fails.
Now, I'm confused and I don't know if the problem is really in the Windows registry database? What is error code 13 of Realtek Audio device and what is actually the VxD loader problem?
I'm completely lost on how to proceed with this problem.
Can someone give advice on how to continue with this question...
Tomppa
I plugged the the hardware id in the Microsoft Update Catalog and the device is identified as a C-Media CMI8738/C3DX PCI Audio Device but there only Windows 2000/XP drivers available through Windows Update (you need to install the ActiveX control to view and download the drivers):
Connect the hardware id PCIDatabase provides a link to C-Media (one-third to the bottom - device ID 0 x 0111):
http://www.PCIDatabase.com/vendor_details.php?id=376
However there are a of the drivers mentioned in the following link that can run, and I suggest to try:
http://www.SevenForums.com/sound-audio/9824-c-media-Freezy-my-PC.html
The driver is the "Striker 7.1 pilot" (striker81742.zip) in the following link:
http://www.htomega.com/downloads.html
An in these drivers .inf file has an id of material corresponding to your device.
I recommend the creation of a System Restore Point before trying new drivers.
-
Windows 7 driver for Texas Instruments PCIxx12 Integrated FlashMedia Controller.
I plan to upgrade to Windows 7 on my Sony Vaio VGN-AR61M Vista Home Premium. I ran the Windows 7 Upgrade Advisor Beta, which showed that everything was OK except for the following:
"Texas Instruments PCIxx12 Integrated FlashMedia Controller. An update is needed to make this compatible with Windows 7 device. Go online to get the latest driver from the manufacturer website»
I tried to find an updated driver from the site of Texas Instruments, but have failed to find one, here or elsewhere online. Does anyone have an idea where I could find it, please? The current driver is Version 2.0.0.18.
Hello
If it is a built-in device, the best place to get the drivers would be Sony.
Go to the following site, enter the model number of the Vaio and click on continue. This takes you to the page where you can download the drivers for all the devices installed.
Sony eSupport - Electronics - Home Page
Thank you for using Windows 7 Ronnie Vernon MVP
Maybe you are looking for
-
connection with the printer problem
Since the evolution of the router, I can not connect with my Epson printer
-
Problems installing KB979441, KB982158 and KB982331
Ive tried everything I can understand to install updates: KB979441, KB982158 and KB982331 Can someone help me please
-
is it possible to create an OFFSET using LACP between a pile of 6224 dell and nortel switches layer 2/3 ethernet (reference 32R1860) GbE switch modules Im sure I have the command of the nortel switch, but not sure about the DELL printer. How to check
-
my computer has limited connectivity to my wireless network
I have windows 7 Home Basic 64 bit. I have the network wireless in my house, but would not have access to the internet on my laptop. It connects to the network but still warn me that your computer has limited connectivity to my wireless network. Plea
-
Beginning Anyconnect WebVPN Portal
I am trying to remove the shortcut start Anyconnect and references to Anyconnect to boot from the portal webvpn for a personalization object I. I can turn it off in the application section of the vpn customization that solves a problem. But after I c