Error audio property

Similar Questions

• I get this error message and Firefox does not start... EXC in ev handl: error: error definition property on NPObject!

  Firefox does not start and this message keeps coming back... I uninstalled and reinstalled... but nothing helped...

  EXC in ev handl: error: error definition property on NPObject!

  Disable the extension "McAfee Site Advisor" who has just updated 3.4.0 that probably out of block of addons list.

  • 'Ctrl + Shift + A' > find McAfee Site Advisor and use 'Disable', and then restart Firefox.
  • Do a Google search without problem
  • It seems that if you re - enable new Site Advisor and restart Firefox you agree. At least you know where to look if you get the error again, or research on Google to slow down.

• Error: The property node (arg 8) visa to configure the Serial Port

  I'm trying to control 8 USB to R232 via a HUB of 10 ports Tripp-Lite (model U222-010-R) and do not have consistent results.  Just after rebooting my computer, I have no problem in running the following program: (I tried to download the VI directly but without success, so here's the extract)

  

  I made sure that the COM ports that I select are that one is available on both the Device Manager and in the NOT-MAX.  But after awhile, it does not work or if the HUB is unplugged and replugged in (even if the names are correct and up-to-date in devices and NOR-MAX Manager) I get the error code "property Node (arg 8) visa set up a Serial Port (Instr) .vi" I want to be able to see these ports consistantly more without having to restart my computer all the time.  Is there a better Setup for this? The previous installation of the computer has a PCI card for it and we have not had any problems with the code, but are facing problems with our upgrade.  The old computer ran Windows XP and had cards PCI and the new computer that I am using a Windows 8 and the USB HUB.  Thanks for any help you can give!

  Mr says:

  Jeff,

  It is a one off lines from specifications Tripp-lite:

  -On bus power, 500mA from the USB 2.0 computer port is shared between hub ports

  This would be in support of what I need or not necessarily?

  -Mr

  No! That's the 50mA by port not 500mA.  an order of magnitude full powered USB (if you want reliable - if you want real problems which appears irratically each time only and is a headache to track down which would)

• Error "Audio not found" every 5 seconds

  Hello

  I use Adobe Premiere Pro (CC 2015) to edit the behind the scenes of a movie, but I can't edit correctly because whenever I hit

  space to see a preview of what is in my calendar, it works for 5 seconds (or the better 8 seconds) and then it shows an error "audio not found."

  and there is a loss of images.

  I have only two audio files in my sequence, one of them suddenly stops and the error of "audio not found" appears, the other audio file

  continues to play for about 2 seconds and then stops as well.

  I can't find a solution and I have to finish this project quickly, so I can burn everything on DVD.

  Does anyone have a solution?

  Thanks (and sorry for the bad English)

  Hi John,.

  I have an I7 mounting and the film's 1080 p 23 976 fps mov of a T3i, jpeg photos and his (wav).

  After a few days, he started working properly again. I don't know what caused it.

• Error #1069: Property not found unloadAndStop on flash.display.Loader

  Hey all,.

  I have inhareted a flex application that was built in (I think) flex 3.x.  I am currently using Flash builder 4 and set the compiler settings to use flex 3.5.  as soon as I have for rund or debug the application, I get the following error:

  ReferenceError: Error #1069: property not found on flash.display.Loader unloadAndStop and there is no default value.

  to MethodInfo - 7)

  service /http://adobe.com/AS3/2006/builtin: apply)

  to SetIntervalTimer / onTimer)

  to::Timer/_timerDispatch() flash.utils

  to::Timer/tick() flash.utils

  I don't know what is the cause, the only thing I can think of at this point is that the app was built with a verson SDK before 3.5 and because I can't choose TI 3.5 throw this error. Can anyone confirm this or give me some advice on this.

  Thanks a ton.

  default project 3.x to assume the Flash Player 9, which did not have

  unloadAndStop on the charger.  Another code that you are running is assuming that player

  10. you want to either demote this code to take the Player 9, or set

  -target-Player = 10 on the compiler options.

• Extension of class Array, get Error #1069: property 0 not found with indexOf appeal

  I'm using inheritance to extend the Array class to create a class of paths that moves of Sprites/MovieClips around on the screen. I get a weird error on a call to indexOf. Here is the error:

  ReferenceError: Error #1069: property 0 not found on paths and there is no default value.
  to Array$ / _indexOf)
  table / http://Adobe.com/AS3/2006/builtin:IndexOf ()
  to Paths / Next () [D:\Stephen\Documents\Flash\TossGame\TossGameFirstPerson\Paths.as:40]

  Here is the corresponding code in the class of paths:

  SerializableAttribute public class paths extends Array
  {
  private var cCurrentPath:Path;
  
  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int is indexOf (cCurrentPath) + 1;.
  If (lNextIndex == length) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  } / / class

  I get the error in the highlighted line. cCurrentPath is filled with a trace object that corresponds to the object at position 0 of the this object (paths). I tried the following variants of the Next() function:

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = lArray. indexOf (cCurrentPath) + 1;
  If (lNextIndex == lArray. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = this . indexOf (cCurrentPath) + 1;
  If (lNextIndex == this. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  public function () following: path
  {
  var lArray:Array =;
  var lNextIndex:int = super . indexOf (cCurrentPath) + 1;
  If (lNextIndex == super. length ) lNextIndex = 0;
  var lPath:Path = lArray [lNextIndex];
  lPath return;
  }
  

  
  Same product if mistake it I try. Anyone got any ideas?

  Stephen

  Flash CS3 Pro (Version 9.0)

  Mark your dynamic class.

  class dynamic public railways extends from table

• HP Jet 7 Win 10 10041 - error Audio 0xE0000234

  I installed Win 10 build 10041 on my Stream 7.

  I did a clean install by creating a USB to start from using F9 and OTG adapter, USB - Hub with power, keyboard &

  mouse. When installing, I deleted all existing partitions to get space max with the installation of win 10.

  I downloaded the drivers of flow 7 Win 8 to another PC and extract the .exe for \swsetup and copied the file to my USB.

  In my stream 7 Device Manager, I selected the unknown devices and tried the drivers on my USB key to install. It worked well.

  There were 2 devices on the left, with exclamation, the Force - sensor G Kionix, which need to run to install correctly setup.

  And the Audio Realtek I2S. When you use the sp6309.exe for the installation .inf, I get "driver not supported on this platform", when I run sp6309.exe directly, I get "error 0xE0000234".

  So I have no sound... Is anyone have a work around?

  Hi, I did fresh installs 10 previous builds of Windows, although not 10041, is there a reason that you have not run the Windows 8.1 instead of manually update driver executables?  They work well for Windows 10, that's how it was done, if you are looking for the other threads here. The largest executable, Intel Chipset, graphic, photo and Audio Driver Pack installs about 10 drivers including one for audio so I think you may have missed something, trying to do it manually in the search of unknown devices in Device Manager. I was install a large first and then restart and install the rest without restarting the computer between each.

• Incompatible error - audio missing file new file

  I don't know how it happened as my media has been stored in the library file, but somehow some files have not related.  They don't relink as it says the new file his tent to re-edit the link isn't the audio file as the original.  I don't want to have to re add the clips in the timeline that I have specific plans I want and don't remember even what part of the video is added.  Is there a way more to ride the error and allow to import without audio? I don't have the audio file anyway.

  Anyone have an idea how the audio file missing?  I've separated the file audio in the timeline of the video that I did not want it, is it possible to separate audio file has left somewhere?

  Thank you!!

  FCP X remembers all your travel:

  

  Find a clip already in use and then create an override alter:

  

  Should be simple to do the sorting.

  I don't know exactly why your clips have disappeared.

  Al

• Error: The property node (arg 1) in .vi VISA set up a Serial Port (Instr)

  Hello

  I've seen people once they have gotten this error, but none of them really apply to my situation.

  Right now I use LabVIEW example code to read from a device manufacturer. This device is connected using a Tripp Lite USB adapter series (http://www.tripplite.com/en/products/model.cfm?txtSeriesID=782&txtModelID=2430) for the connection from the PC to device with RS232. The adapter works fine when using the software prepared in advance (not LabVIEW) given by the manufacturer and the COM port is seen by LabVIEW. When I run the program, I get the property node (arg 1) visa set up a Serial Port (Instr) .vi (I've also attached the VI but it's a standard VI I got of LabVIEW). I get this error despite the fact that I use the same COM port, who has worked with the manufacturer's software.

  I have attached manual of Protocol RS232/debit BUS (not sure if this applies) that requires the device. The device is a mass flow controller whose operating instructions is: (http://nemu.web.psi.ch/doc/manuals/device_manuals/Bronkhorst/917023--Operation%20instructions%20digi...

  I'm using LabVIEW 10.0.1

  Any help is appreciated

  Try to restart the PC and then try the LV version before trying other software.

  I have seen thrid party serial interfaces work on the first try but fail when you switch to another application. It was as if the pilot did not know that it was no longer the first process.

  Ben

• NOR error-89136 property set DAQmx_RefClk_Src with value/PXI1Slot2/PXI_CLK10

  Dear members of the forum OR,.

  We have just received a chassis NI SMU-1073 with an SMU-6361 OR switched in PXI1Slot2 and a shielded connector BNC-2111. Aims to trigger two output signals to control a laser and a sound via Matlab Application.

  Version of Matlab is 8.2.0.701 (R2013b) and data acquisition toolbox is 3.4. Installed is the 9.8.0 driver NOR-DAQmx. We followed the example of the tutorial on the web page of Matlab to generate output. The code establishes a connection with a device, it creates a session and adds an output channel. Once this is done, the session is started in the foreground, but it fails with the following error massage:

  OR error-89136:

  Specified route can not be satisfied, because the hardware does not support.

  Property: DAQmx_RefClk_Src

  Requested value: / PXI1Slot2/PXI_CLK10

  Based on some forums, we checked the route tab of device in Explorer automation and PXI_CLK10 signal is almost yellow everywhere. Looks like he expects, as a reference, the PXI_CLK10 clock, but there is no direct route to it. On the other hand, there are PXIe_CLK100 that is green.

  Question is how through Matlab interface based session one can set the reference clock signal? Or y at - it another way to solve this error? Maybe another type of configuration is necessary?

  Tips, drivers, and solutions are welcome!

  Thank you in advance!

  see you soon,

  go9kata

  P.S.: the same question has been added three different times to Matlab support page, but there was no response to all the

  http://www.MathWorks.de/matlabcentral/answers/107494-acquire-synchronized-data-using-PXIe-devices

  http://www.MathWorks.de/matlabcentral/answers/37134-data-acquisition-from-NI-PXIe-1062Q

  http://www.MathWorks.de/matlabcentral/answers/112626-national-instruments-data-acquisition-software-...

  Hi all

  the last questions are displayed also here and replied:

  several finite pulse trains of TTL

• error "Audio n output device is installed" on my computer hp pavilion 9502au laptop?

  Hello

  It happened yesterday while watching a movie in the VLC Player... He closes the lid of my laptop and my laptop is in sleep mode...

  Then I tried to open the laptop via the power button or the button of the mouse. He has not started. I had to remove the battery and my laptop has begun, but I noticed a red x on my sound icon. When I took my pointer here, he said "no Audio output device is installed"...

  Up to now, I have SWITCHED MY WINDOWS OF X 64 to 32 BITS, DEVICE MANAGER SHOWS NO sound, video, controllers... manually install a hardware display all conexant devices but not mine... all are video capture... registry entries are ok, but no sound related register... windows services are ok... not installing the drivers, because they do not find devices... more BIOS is up to date...

  GUYS, ANY HELP WOULD BE APPRECIATED...

  Completely missing from the Device Manager on a built-in component usually indicates a hardware problem.  It is not something that could have a bad connection as it is soldered on the motherboard.

  If you want to be absolutely certain that it is not a 100% software problem, you can perform a full restore of the HP system back to factory conditions.  Without a doubt, this would confirm if it's a hardware or software problem, but it is more than likely a hardware failure based on behavior.

  However, what is the hardware ID of the device base system?

  This can be retrieved by the opening of the device in the devices and accessing the tab Manager Details and changing the hardware ID property.  This should help to identify exactly what is the base system device.

• Unspecified error audio burning MP4 file on a CD - R

  I used the iPhone app (iOS 8) voice to record memo ~ 45 minutes of audio and it synced to my Windows 7 PC. The size of the file is 19.1 MB. Windows Media Player 12 plays the file without problem. When I try to burn the audio on a CD - R, burning does not immediately work, and the error details dialog box says: "Windows Media Player has encountered a problem when burning the file to disk." I tried two different CD - r blank and get the same error twice. He has problems trying to burn the MP4 audio files using WMP 12?

  Thank you!

  There are manu online for MP4--> MP3 conversion tools + you can use iTunes.

• Error: The property 'Mot_de_passe_du_compte = true' is defined in multiple fields

  Hello

  Today, I got the following error when providing an AD user account. Please, can someone help to solve?

  IAM-2050243: process Orchestration with id 14034, failed with the IAM-4060004 error message: an error has occurred in oracle.iam.provisioning.handlers.ProvisionAppInstanceActionHandler provision of application instance with the 1 key for the user with the 21 key and the cause of the error is an error has occurred in oracle.iam.provisioning.spi.DOBProvisioningMechanism/provision while the application instance commissioning with key 0 for user whose name NCHIP the cause of error is oracle.iam.provisioning.exception.GenericProvisioningException : DOBJ. GEN_ERROR: H: the property 'Mot_de_passe_du_compte = true' is set in several areas. : The property 'Mot_de_passe_du_compte = true' is set in several areas...

  Thank you

  Milan

  It is in fact of SDP table

  SELECT THE SDP. SDP_PROPERTY_NAME,

  SDP. SDP_PROPERTY_VALUE,

  SDP. SDP_KEY

  SDP

  JOIN INTERNAL SDC

  THE TCS. SDC_KEY = SDP. SDC_KEY

  JOIN INTERNAL SDK

  THE SOFTWARE DEVELOPMENT KIT. SDK_KEY = SDC. SDK_KEY

  WHERE SDK. SDK_NAME = "UD_ADUSER".

  AND SDP. SDP_PROPERTY_NAME = "Mot_de_passe_du_compte";

  He'll show the properties for all the versions of a form. You can select only later. It is a bug, no doubt, but don't know if it has been already submitted to Oracle or not.

• Error 1069 property 0 not found on flash.text.TextField and there is no default value

  So, I worked on it for a few days and what makes me crazy is this is a simple file with many simple script and I still can't seem to understand what is this error and how to fix it: property 0 not found on flash.text.TextField and there is no default

  The script below what we look at, everything is drawn with AS3, there is no object library (except for the police). I little understand what means the error, but I do not understand it or how to fix it.

  import flash.display.MovieClip;
  import flash.events.MouseEvent;
  import flash.events.Event;
  import flash.filters.BlurFilter;
  import flash.display.Shape;
  
  import flash.display.Sprite;
  import flash.display.Graphics;
  import flash.events.*;
  import flash.geom.*;
  import flash.events.*;
  
  var boxBg:Shape = new Shape();
      
  boxBg.graphics.lineStyle(1, 0x000000, .5, true);
  boxBg.graphics.beginFill(0xff6600);
  boxBg.graphics.drawRect(0, 0, 50, 50);
  boxBg.graphics.endFill();
  
  var box:Sprite = new Sprite();
  box.x = 335;
  box.y = 245;
  
  addChild(box);
  box.addChild(boxBg);
  
  var toggleBg:Shape = new Shape();
  var toggleBtn:Sprite = new Sprite();
      
  toggleBg.graphics.lineStyle(1, 0xefefef, .5, true);
  toggleBg.graphics.beginFill(0xffffff);
  toggleBg.graphics.drawCircle(0, 0, 25);
  toggleBg.graphics.endFill();
  toggleBtn.buttonMode = true;
  toggleBtn.mouseChildren = false;
  
  toggleBtn.x = stage.stageWidth - 75;
  toggleBtn.y = 25;
  
  addChild(toggleBtn);
  toggleBtn.addChild(toggleBg);
  
  for (var i:int = 0; i < 10; i++) {
      var btnBg:Shape = new Shape();
      
      btnBg.graphics.lineStyle(1, 0xefefef, .5, true);
      btnBg.graphics.beginFill(0xffffff);
      btnBg.graphics.moveTo(12, 0);
      btnBg.graphics.lineTo(24, 20);
      btnBg.graphics.lineTo(0, 20);
      btnBg.graphics.lineTo(12,0);
      btnBg.graphics.endFill();
      
      var btnFont = new Myriad();
      
      var btnFormat:TextFormat = new TextFormat();
      btnFormat.font = btnFont.fontName;
      btnFormat.size = 12;
      btnFormat.align = "center";
      btnFormat.color = 0xffffff;
      
      var btnTxt:TextField = new TextField();
      btnTxt.defaultTextFormat = btnFormat;
      btnTxt.width = 50;
      btnTxt.height = 20;
      btnTxt.y = 5;
      
      var myBtn:Sprite = new Sprite();
      
      myBtn.name = ("Blend " + (i + 1));
      myBtn.buttonMode = true;
      myBtn.mouseChildren = false;
      
      addChild(myBtn);
      
      myBtn.x = 10 + (i * 75);
      myBtn.y = 500;
      
      myBtn.addChild(btnBg);
      myBtn.addChild(btnTxt);
      
      btnTxt.text = myBtn.name;
      
      myBtn.addEventListener(MouseEvent.CLICK, btnHandler);
      myBtn.addEventListener(MouseEvent.ROLL_OVER, btnHandler);
      myBtn.addEventListener(MouseEvent.ROLL_OUT, btnHandler);
      toggleBtn.addEventListener(MouseEvent.MOUSE_DOWN, onToggleVisible);
  }
  
  function btnHandler(event:MouseEvent):void {
      if(event.type == MouseEvent.CLICK){
          if(event.currentTarget == btnTxt[0]){
              box.blendMode = BlendMode.NORMAL;
          }
          
          if(event.currentTarget == btnTxt[1]){
              box.blendMode = BlendMode.DARKEN;
          }
          
          if(event.currentTarget == btnTxt[2]){
              box.blendMode = BlendMode.DIFFERENCE;
          }
          if(event.currentTarget == btnTxt[3]){
              box.blendMode = BlendMode.HARDLIGHT;
          }
          
          if(event.currentTarget == btnTxt[4]){
              box.blendMode = BlendMode.INVERT;
          }
          
          if(event.currentTarget == btnTxt[5]){
              box.blendMode = BlendMode.LIGHTEN;
          }
          
          if(event.currentTarget == btnTxt[6]){
              box.blendMode = BlendMode.MULTIPLY;
          }
          
          if(event.currentTarget == btnTxt[7]){
              box.blendMode = BlendMode.OVERLAY;
          }
          
          if(event.currentTarget == btnTxt[8]){
              box.blendMode = BlendMode.SCREEN;
          }
          
          if(event.currentTarget == btnTxt[9]){
              box.blendMode = BlendMode.SUBTRACT;
          }
      }
  }
      
  function onToggleVisible(event:MouseEvent):void {
      box.visible = !box.visible;
  }
  

  I have made through problems similar, but could not find an adequate solution. If anyone can help me identify the problem and the solution, I would be extremely grateful.

  The following code makes more sense, it is more efficient (although it may be more efficient), and it is better organized:

  import flash.display.Shape;
  import flash.display.Sprite;
  import flash.events.*;
  import flash.geom.*;
  import flash.events.*;
  import flash.text.*;
  
  var box:Sprite;
  var toggleBtn:Sprite;
  var btnFont:Font;
  var btnFormat:TextFormat;
  
  init();
  
  function init():void
  {
       initFormat();
       makeBox();
       makeToggleButton();
       makeButtons();
  }
  
  function initFormat():void
  {
       btnFont = new Myriad();
       btnFormat = new TextFormat();
       btnFormat.font = btnFont.fontName;
       btnFormat.size = 12;
       btnFormat.align = "center";
       btnFormat.color = 0xffffff;
  }
  
  function makeToggleButton():void
  {
       toggleBtn = new Sprite();
       toggleBtn.graphics.lineStyle(1, 0xefefef, .5, true);
       toggleBtn.graphics.beginFill(0xffffff);
       toggleBtn.graphics.drawCircle(0, 0, 25);
       toggleBtn.graphics.endFill();
       toggleBtn.buttonMode = true;
       toggleBtn.mouseChildren = false;
       toggleBtn.addEventListener(MouseEvent.MOUSE_DOWN, onToggleVisible);
       addChild(toggleBtn);
  
       toggleBtn.x = stage.stageWidth - 75;
       toggleBtn.y = 25;
  }
  
  function makeBox():void
  {
       box = new Sprite();
       box.graphics.lineStyle(1, 0x000000, .5, true);
       box.graphics.beginFill(0xff6600);
       box.graphics.drawRect(0, 0, 50, 50);
       box.graphics.endFill();
  
       addChild(box);
  
       box.x = 335;
       box.y = 245;
  }
  
  function makeButtons():void
  {
       var myBtn:Sprite;
       for (var i:int = 0; i < 10; i++)
       {
            myBtn = drawButton("Blend " + (i + 1));
            addChild(myBtn);
            myBtn.x = 10 + i * 75;
            myBtn.y = 500;
            myBtn.addEventListener(MouseEvent.CLICK, btnHandler);
            myBtn.addEventListener(MouseEvent.ROLL_OVER, btnHandler);
            myBtn.addEventListener(MouseEvent.ROLL_OUT, btnHandler);
       }
  }
  
  function btnHandler(e:MouseEvent):void
  {
       if (e.type == MouseEvent.CLICK)
       {
            switch (e.currentTarget.name)
            {
                 case "Blend 1":
                      box.blendMode = BlendMode.NORMAL;
                      break;
                 case "Blend 2":
                      box.blendMode = BlendMode.DARKEN;
                      break;
                 case "Blend 3":
                      box.blendMode = BlendMode.DIFFERENCE;
                      break;
                 case "Blend 4":
                      box.blendMode = BlendMode.HARDLIGHT;
                      break;
                 case "Blend 5":
                      box.blendMode = BlendMode.INVERT;
                      break;
                 case "Blend 6":
                      box.blendMode = BlendMode.LIGHTEN;
                      break;
                 case "Blend 7":
                      box.blendMode = BlendMode.MULTIPLY;
                      break;
                 case "Blend 8":
                      box.blendMode = BlendMode.OVERLAY;
                      break;
                 case "Blend 9":
                      box.blendMode = BlendMode.SCREEN;
                      break;
                 case "Blend 10":
                      box.blendMode = BlendMode.SUBTRACT;
                      break;
            }
       }
  }
  
  function onToggleVisible(e:MouseEvent):void
  {
       box.visible = !box.visible;
  }
  
  function drawButton(buttonName:String):Sprite
  {
       var btnTxt:TextField = new TextField();
       btnTxt.defaultTextFormat = btnFormat;
       btnTxt.width = 50;
       btnTxt.height = 20;
       btnTxt.y = 5;
       btnTxt.text = buttonName;
  
       var myBtn:Sprite = new Sprite();
       myBtn.graphics.lineStyle(1, 0xefefef, .5, true);
       myBtn.graphics.beginFill(0xffffff);
       myBtn.graphics.moveTo(12, 0);
       myBtn.graphics.lineTo(24, 20);
       myBtn.graphics.lineTo(0, 20);
       myBtn.graphics.lineTo(12, 0);
       myBtn.graphics.endFill();
  
       myBtn.name = buttonName;
       myBtn.buttonMode = true;
       myBtn.mouseChildren = false;
  
       myBtn.addChild(btnBg);
       myBtn.addChild(btnTxt);
  
       return myBtn;
  }
  

• ReferenceError: Error #1069: property not found on flash.display.Stage length

  Hi all

  I have 3 input textfield. Each textfield has a string pre-loaded in it. When the user presses Tab, the focus must be cycled around textfield 1-3. Now, I'm trying to set the index of the caret to the last letter of the TextField. What is the problem with the code?

  Code:

  public function myTabKeyDown(event:KeyboardEvent):void
            {
               if (event.keyCode == Keyboard.TAB)
               {
                      //set caret selection
                      event.currentTarget.setSelection(event.currentTarget.length, event.currentTarget.length);
               }
            }
  

  Error:

  ReferenceError: Error #1069: the property not found on flash.display.Stage length and there is no default value.

  Thank you

  Zainuu

  If your textfields are named (you went for each text field properties and gave it a unique name) you can use the Manager of Focus see IFF it has focus to set the selection to the end.

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/FL/managers/FocusManage r.html? filter_flash = cs5 & filter_flashplayer = 10.2 & filter_air = 2.6