Error C:\Windows\System32\MMDevApi.dll

Similar Questions

• Run dll error: c:\windows\system32\werconcpl.dll

  My computer took a long time to start now, after I entered my password to log on, the screen goes dark forever and finally he said something about a Run dll error: error c:\windows\system32\werconcpl.dll conducting a paging operation and it still doesn't let me start the computer. What is the problem here and how can I solve this problem? Thank you!

  Your PC from a manufacturer of large surfaces, for example Dell/HP and if yes to the first startup, in the first screen before winning, is there an option to run this diagnostic to the?

• Startup error: C:\Windows\system32\imagxra.dll is not valid

  Original title: C:\Windows\system32\imagxra.dll is not valid

  It appears when I click on anything and while the pc is CONSTANTLY boot on & it will be visible!
  WHAT CAN I DO?

  Hi LumierRodriguez,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Check if the problem persists in the safe mode and after return with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• error: C:\windows\system32\SHELL32.dll - updated Microsoft DLL library

  Hello, I would like to find answers to the following question. I have a problem to instal: PaintShopPro/Corel/Photo X 2.

  After you insert the CD-ROM disc, I get this error message: C:\Windows\System32\SHELL32.dll,: could not install. Please get Microsoft

  Library DLL-implementation to date.

  Thanks for any help.

  Sincerely yours

  Josef Rysavy

  E-mail address is removed from the privacy *.

  Hi JosefRysavy,

  You are able to correctly install the other applications?

  I recommend you contact Corel support for assistance.

  Hope the helps of information.

• Error: C:\windows\system32\shsvcs.dll

  Original title: when I turn on my computer, the first thing it does is to show this error:__c:\windows\system32\shsvcs.dll___I simply, click OK and it opens. I want to fix this problem. Looking for a solution.___Thanks, __sallygbrentg

  Start up

  Hi Sallygbrentg,

  1. Since when are you facing this problem?
  2 did you last modified the software on your computer?

  Shsvcs.dll module is the Windows Shell Services dynamic link library and it has been written by Microsoft Corporation. The module is a component of the Windows operating system.

  Step 1:

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Step 2:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open my Explorer error C:\Windows\system32\DWrite.dll if the other is not designed to run on Windows or it contains an error

  Original title: cannot open my explores

  Try to connect to the Solution Explorer, I get a message:

  "C:\Windows\system32\DWrite.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support"

  Is this a virus?
  What is a corrupted dll?
  An easy way to fix it?

  Hi Ephisto,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/mmcbasedll-is-either-not-designed-to-run-on/2031a0f9-c3b0-4d67-B9F1-87c6d2ec54b4

  I hope this helps!

• Error C:\Windows\system32\Duser.dll if either one is not designed to run on Windows or it contains an error

  Original title: error DUser.dll

  I am on Windows 8, and I continue to have an annoying problem.

  Whenever I try to run some of my programs, I get an error that says that C:\Windows\system32\Duser.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. 0xc000012f error status.

  I tried running sfc/scannow, but he can never fix it. The problem is not an emergency, but it is really annoying to me whenever he appears.

  I know it sounds strange, but it stopped giving me the error. Not sure why however. Anyway, thanks for trying to help!

• error C:\windows\system32\csgina.dll not found

  I am trying to download the VPN from Cisco Systems customer and I get the message that the C:\windows\system32\csgina.dll file could not be found. I am unable to get my VPN client to connect to the internet. Is there a way to fix this?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
   
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Don't get the error 'C:\Windows\System32\psapi.dll', no matching symbolic information found when starting an application

  Original title: my application can not start on Windows 7 just because one name of the subfolder is config

  My application can run perfectly on Windows XP but not on Windows 7. When I run it in the debugger on Windows 7, it crashes, the debugger window displays the last loaded dll that is,.

  Load "C:\Windows\System32\psapi.dll", no matching symbolic information found.

  My application configuration files are located in the subfolder 'config', to get my application to the top of race I must change his name to something else say 'ics_config', I run it in the debugger after changing the name of the subfolder, it shows the following dll after psapi.dll is uxtheme.dll.

  Load "C:\Windows\System32\psapi.dll", no matching symbolic information found.

  "C:\Windows\System32\uxtheme.dll" dependent, no matching symbolic information found.

  I suspect that there is something wrong with uxtheme.dll, it can cause the application to crash if the name of the subfolder is "config."
  The application is our company product to the train control system, there is no change to the computer.
  Further investigation found that file "sso.cfg' in the config directory is the first cause, either rename file 'config' to something else or
  Rename the file 'sso.cfg' located in the folder 'config' to something else so that my request to start.
  File 'sso.cfg' is a SSO configuration file, we use LDAP (active directory) to manage users and their privileges.
  Hope this information helps.

• @ Startup error: < root Windows > \system32\hal.dll.

  A "highly recommended" malware free program apparently deleted a file system.

  After the reboot, I received this message at startup:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll.
  Please reinstall a copy of the above file
  So the question is... How do I re - install the hal.dll file when I can't start the computer... Download USB?
  Hi thomasm.
   
  Follow the steps listed in this article to resolve the problem:
  Error message: Windows has not start because the following file is missing or damaged

• Error: ' c: Windows\System32 shimeng.dll valid not a windows image.

  Original title: problem

  How can I fix this dll c:windows\system 32 shimeng.dll not valid windows image

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• c:\windows\system32\msctfui.dll not designed to run on windows or it contains an error

  When I start my PC, I get the error "C:\windows\system32\msctfui.dll is not designed to run on windows or it contains an error. The information I can find says to uninstall the program that has the error. How will I know which program is causing this error?

  Hi crystalvase

   

  Method 1:

  You can perform a security scan and check if you have any viruses or malware present. Check out the link below to run the scan and check if this helps-

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  You can perform a clean boot and see if you can identify the program causing the problems. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• C:\Windows\system32\avrt.dll error when running Windows Media Player

  When I turn on my computer or try to run Windows Media, I get the error C:\Windows\system32\avrt.dll. I have Windows Vista Home Premium and Microsoft Media Player version 11. I ran several spyware, viruses and malware, and they come to own. I was told to uninstall media player and then reinstall, but I only get errors when I do. Help, please

  Had the same problem, avrt.dll was corrupted and causing an error with logonui.exe. Sound does not work.

  I copied the avrt.dll from my other computer.
  On a damaged computer, find avrt.dll in your folder windows/system/32:
  (1) make a right click, properties and change the owner to yourself
  (2) once the property is set, you will be able to change permissions
  (3) give you all permissions
  Copy the new avrt.dll in your system32 folder

  Reboot, profit

  You may have to disable the user first access control, you can do so under control panel > users

• Error performance of load C:/windows/system32/sshnas21.dll DLL.

  I have Windows Vista and, recently, an error box / message on the main screen after signing in. It has a big red X on the left, top left he says Run DLL and in the box: error C:/windows/system32/sshnas21.dll load. He seems to have shown little Mcaffee after install, uninstall, and reinstall a part of their security. I already had the main guarantee, but it is the part of the protection of the family. They could not understand why this program will not open. So obviously, I now this message they say is due to my computer, not them. Help me! How can I fix this message?

  Hello

  Google: sshnas21.dll

  It is Malware

  _______________________________________________

  It's the malicious software that may or may not have been removed or a boot remains for her entry

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902