Error ""cannot connect to the device", Viewer images/key chain brookstone.

Similar Questions

• vWorkspace 8 - VDI Windows 7 "Error cannot connect to the server '.

  Hello

  We are soon about to begin the deployment of our vWorkspace VDI solution. We have Windows 7 Client s connection to Win 7 Pro 32 Bit VM on Hyper-V.

  Sometimes when the user intiates a connection to the desktop of Windows 7 VDI published the vWorkspace Client launch and are trying to connect, and then an error will be presented "Error cannot connect to the server. We do not understand all the time and it is random.

  Go it is addressed urgently as it's going to cause some major headaches with our users.

  Someone at - it ideas?

  Cool, thanks Dan.

  I'll find the case of Mike and send the info from there.

• 29114 error cannot connect to the DB

  I get the 29114 error cannot connect to the DB, I checked all the characters... advice passwords?

  See you soon

  Problem solved, s/n messed up something in the script. Once I had them redo all is well now.

  See you soon

• Unable to connect to the wireless network, Windows error cannot communicate with the device or the reaource (primary DNS server)

  Original title: internet connection problem

  Hey,.

  I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:

  1. Windows cannot communicate with the device or the reaource (primary DNS server)

  2. the connection between the Internet and your access point, router or cable modem is broken

  3 problem with access point or wireless adapter

  I think it's an effects of virus or something?  Because yesterday it works really well. How can I fix? Thank you very much

  Hello Hildegard Lydia,

  You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.

  What is the brand and model of your computer?

  Please follow the steps mentioned below:

  Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
  I suggest you try to reset the TCP/IP stack.
  http://support.Microsoft.com/kb/299357

  Method 2:

  I suggest that you refer to the following link:

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7

  Method 3:

  See the steps in the following link and check:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please an update on the status of the issue to help you further.

• m1217 HP scanner cannot connect to the device

  I have a HP m1217nfw print, scan and fax.   I'm on Mac OS X Lion 10.7.5;  After calling HP and several hours later, they can not resoulve this problem with my scanner doesn't work do not.

  I get a message from (unable to connect to the device).

  With HP I uninstalled the printer, remove all software HP, Veryify permissions & repair disk permissions of the drive, update the Firmware, that HP and myself can think okay.

  The printer prints, copies, but the scanner will NOT scan.  This has happened since an update of MAC 10.7.4 to 10.7.5.  I talked to Apple numorus era and I was informed that HP has not sent a new version update.  HP told me that current software of the printer are supported for 10.7.3 to 10.7.5

  Now, I spent 2 days on this.   I had to pay HP for support, since I was 13 months with my printer, 1 month on my warranty.

  HP told me they had a lot of complaints about this, but there is no resolution.  I told HP to contact Apple and they say we cannot do this.

  I need HELP!

  Eric

  Go into your MacintoshHD and follow these steps:

  TURN OFF THE POWER TO THE PRINTER 1.

  The solution to restore previous functionality is to manually delete
  the ICA of Library/Image Capture/devices module.  Please note that they
  need to remove ³HP Scanner.app² and not ³HPScanner.app² these are two
  very different drivers.  ³HPScanner.app² is the driver for scanning for safran
  devices.

• BlackBerry Smartphones cannot connect to the device.

  Hello

  I got a 8320 a few days ago, everything is OK until today...

  I tried to connect it to my computer, but the DM (4.7version) remind me ' unable to connect to the device. Please make sure that the device is properly connected and try again.

  Curve 8320

  Platform: 2.7.0.90

  App version: 4.5.0.110 (152)

  DM 4.7.0.32

  Windows XP Professional

  someone at - he a good idea on this message?

  Hello

  You have little free memory left on your device. 15 MB is considered to be low, you have 8 MB

  You have a lot of third-party applications on your time BB, icall, bbalerts etc?

  I don't know your level of experience, so if you know I'm sorry but if please read and let me

  not know if this is the case.

  Most people close the applications by pressing escape or the red button. This does not close the applications.

  Each application has an option CLOSE. For example, if you are in the calendar, press the menu key (spotted) and scroll down to the bottom CLOSE is listed. Go through each application and then press close. Go to the menu press browser and options select cache operations clear all categories and reached escape it will say cleaning memory

  Thank you

  Bifocals

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&message.ID=9225#M9225

  If you follow these steps and face up to your memory, your phone will run smoothly. It will be

  also facilitate a good connection with the Office Manager. At the moment the habit

  to do a battery pull just before the USB connection.

  When you have cleaned everything you can, clean again. You really want to stay close to 30 MB

  If it is possible

  Please let us know if you need help with any of the steps.

  Thank you

• BlackBerry Smartphones cannot connect to the device during synchronization

  Hi, first of all I'm new here so if I ask a question who responded... Sorry... could not find when I tried. ;-)

  I have a Bold 9000 with Desktop manager 4.7 and Vista SP1 on my desk.

  When I try and sync Outlook it gives me the following message... "unable to connect to the device. Please make sure that the device is connected. I can display media files etc in the Office Manager, but fail to synchronize? any ideas?

  Thank you

  Connect the unit to a main usb on the back of the computer and try again, let me know.

• One of my sites always connects, but the other becomes had an ftp error cannot connect to the host.

  My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guy.  A site still connects fine, but it stopped connecting. With the second site when I click the button I get a delay then "an ftp error occurred - cannot establish a connection to the host".

  However, I can still access the second server in the remote site through an FTP program and support host confirms that my connection works very well from his computer.

  I tried to do with the old stuff (1) Site > Manage Sites > export to create an .ste file (2) completely, restart the management of Sites (3) > import the .ste file (4) click on connect to the remote server - But that made no difference

  The two sites are hosted by the same company does not mean that they are on the same physical server.  Your connection problem may be due to many things.

  • Username and password may have changed or been reset.
  • Server permissions problems (GoDaddy is known for this).
  • IP blocking.
  • Server is down.
  • etc...

  Are you able to connect with an FTP 3rd party like FileZilla client?  If this isn't the case, I guess it's a server problem & you will need to contact your host.

  Nancy O.

• Odiconsole error cannot connect to the specified repository. Please select a different alias and try again.

  Hello

  My tool odi 11g client is in linux server.

  ODI 11 g cilent (linux) and the server is linux server.

  I can not connect on behalf of the repository only job as workrepo210. His connection with success.

  

  I created two more workrepository11 wprkrepo211and repositories.

  To do this, I created two different users. I gave permissions also. I configured workrepositories details in odiconsole & admin console

  But I'm unable to connect to in odiconsole workrepository11 wprkrepo211and.

  When I try to these wprkrepo211and workrepository11
  

  I get the error message like

  Unable to connect to the specified repository. Please select a different alias and try again.

  
  

  
  

  
  

  Please help me.

  Thanks in advance,

  A.Kavya.

  Hello

  now its works well.

  I configured with default details repository work & maste rreposiory in the administration console.

  I configured the url jndi in odi console with the correct data.

  Thank you best regards &,.

  A.Kavya.

• Catalog.ircat LR sync error, cannot connect to the server...

  I imported a few pictures, and when I tried to continue, it could not connect... Any advice?

  Thank you

  Hello

  Please, try the steps mentioned below.

  • Sign out of Lightroom on mobile devices.
  • Reconnect and Start Sync (if he is suspended).
  • Select Preferences > mobile Lightroom and monitor the synchronization log appears. Do scroll down, however, and check if the images do not have to synchronize.

  Kind regards

  Assani

• Students cannot "connect/disconnect the virtual machine's CD/DVD devices.

  I will start with this context (and apologies for the wall o ' text): I'm a newbie.  I took the course VMware local community college offers [VMware ESXI Server Enterprise (CIS197)], but I've not yet certified. And I don't have a real experience, except what I have taught myself so far.

  I recently accepted a position of learning associated with the College (think: glorified lab tech). I was tasked to work with stuff from VMware in the laboratory (among other things such as Cisco and Juniper equipment). There is no pass-down information like the previous left the position four months ago.

  We have a single host running ESXi 348481 4.1.0. "We have vCenter Server (5.5.0, 1312298), running on Windows Server (2008 R2, Enterprise Edition).  Access host and vCenter through two different IP, addresses using the vSphere client (either 5.5 or 4.1, using a single application - depends to know if I connect to the host or vCenter).

  At that time, the host is using local storage only (we have plans to change this, but it will take time).  The host is not a production on its own server, because it does not have a school systems.  He does, however, run a number of virtual machines in the lab, students use (Linux, Microsoft, Web design, etc.).  So, right now, I can't take it down.

  I was tasked to create a number of virtual machines that students can use to make the basic labs of Microsoft Windows 7.  So far, I have:
  -Created users, one per student, on the host.
  -Creating VMs, deploy one per student, I have a gold model vcenter.
  -Creation of roles to limit the access of students to just their VM attributed, which they access via client vSphere.
  -Created a Windows Server 2008 R2 domain controller that is also a DHCP server.
  -Created a virtual network, which is accessible only by the Windows 7 virtual machines and is not visible outside the vSphere environment (if I said this right - he does not see the Internet or school network).

  So far, it's all good.

  However, I need to be able to allow students the ability to edit the ISO file on which their VM points in order to complete some laboratories. I guess they would use the button "connect/disconnect the virtual machine's CD/DVD devices" on the taskbar (or console window). It does not work.
  I searched a lot and found that others have had the same problem.  However, all of the solutions I've tried so far have failed.  When they click 'Connect to ISO image on the data... store. "they get an error message means nothing to me,"an internal error has occurred in the vSphere Client. Details: Object Reference not set to an instance of an object. Contact VMware support if necessary.
  The role that I use for students has these settings:
  -Data store > Browse the data store
  -Virtual Machine > Configuration > change the settings of the device
  -Virtual Machine > Configuration > settings
  -A bouquet under the virtual machine > Configuration >
  -Configure CD media
  -Console interaction
  -Connection of the device
  -On
  -Power off
  -(and more, which I don't believe are important to the question)
  -State > create the snapshot
  -State > go back to the snapshot

  I tried "Virtual Machine > Configuration > add existing disk", "Virtual Machine > Configuration > add new disk" and "Virtual Machine > Configuration > add or remove an instrument" with no luck.

  Either by the way, the root account can do all these things, but no other account can - not even a game as an administrator account.

  I've seen mention I have apply the role in the data store.  It is perhaps part of the problem. I can't see the data store when I am connected to the host (wellll, I can, if I click on the host name, then on the Summary tab - but roles do not apply at this stage).  I see is 'Inventory' (which has virtual machines and Pools of resources), 'Rôles' and 'log files '.

  I can see the data store when logged in vCenter. Roles of students, however, are defined on the host computer. If I clone the role of users in vCenter and change this role cloned to have "permissions" that those who are on the host computer and then apply it to the data store, it still does not work.

  So, after all this (which I hope I've included all the necessary information), what can I do to allow the students to change ISO to which they are connected?

  Of course, if I left something, or if someone has a question, please ask.  I want to get this resolved as soon as I can.

  It turns out that I finally found the solution to the problem.

  What 'fixed', it is sufficient to vSphere Web Client to vCenter, which then allowed us to use Single Sign-On (SSO).  This, in turn, allowed us to define users and roles in vCenter (rather than having set them up directly on the host computer) which have then been applied to the VMS of students and also to the data store.

  Now, they can (de-) connect their ISOs at will.

  I find it interesting that vSphere Client (application) shows the users (and the things that they have access to), but it won't let you set of users.

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Windows cannot connect to the printer operation failed with error 0x0000007e

  Hello

  OS: Windows 7 x 86 SP1

  Print server: Windows Server 2003 R2 SP2 x 86

  Printer: HP LaserJet 8150 printer shared and listed in the directory

  Problem:

  When I try to install the printer in the Add Printer Wizard, choose install a network printer, she finds a driver on the server, installs, then brings up an error (see topic).

  In the Print Service logs, I see the following:

  "The print spooler failed to load a plug-in module, 0x7e error code. See the user context information for event data.

  I can install the printer very well if I choose local printer, new port, TCP/IP, and enter the IP address. This isn't a solution, as users cannot be expected to go through this process, or for me to go around all the machines and do it manually. More I want than the print jobs to the print server's spool, and I think that the local installation method uses the local spooler.

  I tried to install the driver of HP UPD PCL 6, x 86 and x 64, on the print server.

  When I check what the client machine pilot chose to install by going to the properties of the print server, I can see that he chooses the former driver "HP LaserJet 8150 Series PCL 6". I presume that it is incompatible with Windows 7, that's why I am getting the error cannot connect.

  How can I get Windows 7 clients to use the UPD?

  I left our Windows 2003 print server to a Server 2008 and comes to install the HP UPD x 86 and x 64 for each printer. Now everything works perfectly! All XP and 7 customers can install printers network without problem.

  I suspect that the problem was due to have many different versions of drivers on the old print server, and customers did not know which to use?

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.