ERROR: "cannot load EIO. DLL."

Similar Questions

• When you try to run Linksys Wireless Network Monitor error: cannot load ProcNICs.dll, Can t Load Res_dll

  Original title;

  Linksys wmp54g & windows vista

  When you try to run Linksys Wireless Network Monitor I get the following errors:

  Cannot load ProcNICs.dll

  Failed to load Res_dll

  Linksys wireless adapter is installed and running properly, but I can't use the application linksys to establish a new network connection.

  Any suggestions?

  Thank you.

  Hello

  I suggest you contact Linksys for assistance:

  http://home.Cisco.com/en-us/home

  Linksys Support link:

  http://homesupport.Cisco.com/en-us/support

  I hope that helps!

  If you need help on Windows, please keep us informed.

  We are here to help.

• STANDBY.wrf error Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\STAF\bin\JSTAF.dll: cannot load the .dll AMD 64-bit on a 32-bit IA platform

  Hello

  I created a single mosaic and get error below in the file standby0.wrf.

  As stated in the doc, I made a 32-bit windows to watch VM and installed 32-bit staf followed by staf configurations. I have installed all critical updates for windows.

  Exception in thread "main" java.lang.UnsatisfiedLinkError: C:\STAF\bin\JSTAF.dll: cannot load the .dll AMD 64-bit on a 32-bit IA platform

  	in java.lang.ClassLoader$ NativeLibrary.load (Native Method)
  	at java.lang.ClassLoader.loadLibrary0 (unknown Source)
  	at java.lang.ClassLoader.loadLibrary (unknown Source)
  	at java.lang.Runtime.loadLibrary0 (unknown Source)
  	the impossible (unknown Source)
  	to com.ibm.staf.STAFHandle. < clinit > (STAFHandle.java:306)
  	at IdleVMTest.main (IdleVMTest.java:30)

  
  

  I enclose my test log.

  Please let me know how to fix it.

  Thank you

  Suresh

  Hi Suresh,

  In fact, the first client does not generate wrf files. Customer of the tile, client0, generates the wrf files. The first customer runs the harness and brings together the results of each client in the results file.

  The program which ensures the pings is located on client0, and he struggles to leave because of the bad number of bit Java on client0. This program writes to standby0.wrf. Your VMS Eve is probably fine.

  Rebecca

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• Microsoft expression are not work says cannot load ftpsrvutl.dll

  Microsoft expression are not work says cannot load ftpsrvutl.dll

  Hello

  Microsoft Expression is not supported on responses to check with Experts of these resources.

  Microsoft Expression
  http://www.Microsoft.com/expression/

  Microsoft Expression - community
  http://www.Microsoft.com/expression/community/

  Microsoft Expression - Forums
  http://social.msdn.Microsoft.com/forums/en-us/category/expression/

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• help with this error message (load needed DLLs for kernel)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error message load needed DLLs for kernel in Windows XP
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·         When you get this error message?

  Refer to the following articles:

  Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671

  http://support.Microsoft.com/kb/812450

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ACROBAT CANNOT LOAD THE DLL BASE IT IS - ACROBAT CANNOT LOAD THE DLL BASE IT IS

  Is there a person who works to answer questions in THEIR own forum on THEIR own Adobe software? If so, why an Adobe employee has not answered this question on the base dll does not? It certainly seems there are a lot of CUSTOMERS from Adobe that are affected by this problem and is worthy of some time with an Adobe employee to get it resolved!

  ACROBAT CANNOT LOAD THE DLL BASE IT IS

  ACROBAT CANNOT LOAD THE DLL BASE IT IS

  ACROBAT CANNOT LOAD THE DLL BASE IT IS

  I wonder where you found Adobe Reader 9.3... ?  (No seriously, just "trolling".)

• I Photofunstudio 8.0SE but when I try to run it, I get error "cannot find MSVCR71.dll.

  I loaded Photofunstudio 8.0SE leave a DVD. When I try to run the program I get the error message "Cannot find MSVCR71.dll" I ran SFC but always this error message. Should I try downloading the file from the internet, if so where? Thank you Al7 I forgot to say that I am under windows7 64 bit

  Hi Al 7.

  There are several different ways that msvcr71.dll errors may appear on your computer. Here are some of the most common ways that you can see msvcr71.dll errors:

  • "Msvcr71.dll not found."
  • "This application has failed to start because msvcr71.dll was not found. Reinstalling the application may fix this problem. »
  • "Cannot find [PATH] \msvcr71.dll.
  • "The msvcr71.dll file is missing."
  • "Failed to start [APPLICATION]. A required component is missing: msvcr71.dll. Please reinstall [APPLICATION]. »

  Msvcr71.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the msvcr71.dll error is a key piece of information that will be useful while solving the problem.

  Cause of Msvcr71.dll errors
  Msvcr71.dll errors are caused by situations that lead to the removal or corruption of the msvcr71 DLL file.

  In some cases, the msvcr71.dll errors might indicate a problem of registry, a virus or malware issue or even a hardware failure.

  How to fix Msvcr71.dll errors
  Important: do not download msvcr71.dll from a website "Download DLL. There are many reasons why a DLL file download is a bad idea. If you need a copy of msvcr71.dll, it is better to get it from its original, legitimate source.

  Note: Start Windows Mode without failure to complete one of the following steps if you are unable to access Windows normally due to msvcr71.dll error.

  1. Restore the trash msvcr71.dll. The simplest possible cause of a "missing" msvcr71.dll file, it's that you deleted by mistake.

     If you think you've accidentally deleted msvcr71.dll but you already emptied the Recycle Bin, you can collect msvcr71.dll with a free file recovery program.

     Important: Recovering a deleted copy of msvcr71.dll a file recovery program is a smart idea if you are convinced that you have deleted the file yourself, and that it was working properly until you did.

  2. Run a scan for virus/malware from your whole system. Msvcr71.dll errors may be related to a virus or other infection of malicious software on your computer that has damaged the DLL file. It is even possible that the msvcr71.dll error you see is related to a hostile program who is posing as the file.

  3. Use the system restore to undo recent system changes. If you suspect that the msvcr71.dll error was caused by a change to an important file or a configuration, restore the system could solve the problem.

  4. Reinstall the program that uses the msvcr71.dll file. If the DLLS msvcr71.dll error occurs when you use a particular program, reinstall the program should replace the file.

     Important: Do your best to do this next step. Reinstall the program that provides the msvcr71.dll file, if possible, is a likely solution to this DLL error.

  5. To update the drivers for hardware devices that might be linked to msvcr71.dll. If, for example, you receive an error "the msvcr71.dll file is missing" when you play a video game in 3D, try to update the drivers for your video card.

  Note: The msvcr71.dll file may or may not be related to video cards - it was just an example. The key here is very attentive to the context of the error and troubleshoot accordingly.

• Roll back a driver to a previously installed version if msvcr71.dll errors started after the update of a particular hardware driver.

• Run the sfc/scannow command System File Checker to replace the copy of msvcr71.dll missing or damaged file. This DLL file is provided my Microsoft, the System File Checker tool should restore it.

• Install the available Windows updates. Several service packs and other patches replace or update some of the hundreds of distributed Microsoft DLL files on your computer. The msvcr71.dll file could be included in either of these updates.

• Test your memory and test it on your hard drive. I left the majority of troubleshooting equipment at the final stage, but memory and hard drive of your computer are easy to test components are more probable that could cause msvcr71.dll errors because they do not.

  If one of your tests of hardware failure, replace the memory or replace the drive hard as soon as possible.

• Repair your Windows installation. If the msvcr71.dll file individual troubleshooting tips above fails, perform a restart or a repair installation should restore all Windows DLL files to their working versions.

• Use a free registry cleaner to fix msvcr71.dll issues in the registry. A free registry cleaner program may be able to help by deleting some registry entries disabled msvcr71.dll that might cause the DLL error.

  Important: Rarely, I recommend the use of registry cleaners. I've included the option here as an attempt to 'last resort' before the destructive step to come up next.

• Perform a new installation of Windows. A clean install of Windows will erase the entire hard drive and install a fresh copy of Windows. If none of the above steps fix the msvcr71.dll error, this should be your next course of action.

  Important: All the information on your hard drive will be erased during a clean installation. Make sure that you have done the best possible attempt to correct the msvcr71.dll error using a troubleshooting step before this one.

• Troubleshooting a hardware problem if any msvcr71.dll error persists. After a clean install of Windows, your DLL problem may be hardware related.

Applies to
The msvcr71.dll error message could apply to any program or system that could use the file on any of the operating systems of Microsoft Windows 8, Windows 7, Windows Vista, Windows XP, and Windows 2000.
Msvcr71.dll questions?
That a community of computer supported the help of enthusiasts! View the details of your question msvcr71.dll in the Microsoft Community. Don't forget to let us know the exact msvcr71.dll error message you see, and what measures, if any, you already have to solve the problem.

• Cannot load the DLL

  I had Skype on my PC for years, after some clean up I cannot load Skype more... WHY?

  OMG I'm so glad. I had the same problem. Well my computer was turned off and when I got on, I was getting the same error msg. I did some research and a site said to go to www.oldapps.com/skype.php so I went there and downloaded Skype 4.1.0.136. It's one that has worked for me. I was not even uninstall the last of them. I hope this works for you, too! Good luck!

• How to fix error of loading M3Plugin.DLL

  Error loading M3plugin.DLL

  Hello

  You really don't want MyWebSearch toolbar as it has malware that are associated with him.

  M3PLUGIN. DLL, information
  http://www.bleepingcomputer.com/startups/m3plugin.dll-23933.html

  How to get rid of the Mywebsearch toolbar
  http://www.ehow.com/how_4780067_rid-MyWebSearch-toolbar.html

  Products Fun Web "My Web search" removal Instructions and help
  http://www.pchell.com/support/MyWebSearch.shtml

  -------------------------------------------------------------

  To ensure that his party and IE and system are clean:

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE

  IE - tools - manage Addons (for sure disable SSV2 if she's here, is no longer necessary, but)
  Java always install it and it causes problems - you never update Java to go back in and turn it off again.)
  Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look
  right. Allowed are usually OK and "unauthorized" are not always bad. If a doubt
  program to ask about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run
  -not all are bad but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download
  It's here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Adobe Story in error "cannot load the user's preferences" then I have to disconnect

  I try to access Adobe Story, but whenever I connect I get an error saying "Cannot load the user's preferences", then I have the ability to log out, but nothing else. I tried this using the desktop application as well as several browsers on my Mac and my PC. I tried to raise that this issue with the chat support however could not help with the issue. What can I do to solve this problem and power access to my account?

  Hello

  Can you please try again? He still does not?

• Skype error: Fatal Error - cannot load the library 'olepro32.dll' (N

  Normally, my Skype is perfect! but for some strange reason, it stopped working! I tried to research this topic but failed to fill and reslove this

  He will be very grateful if you guys help me to reslove this!

  

  

  The issue is not with Skype but with damaged your computer system files.

  Try to run the tool (sfc/scannow) System File Checker

  http://support.Microsoft.com/kb/929833

  See also this similar case:

  http://community.Skype.com/T5/Windows-desktop-client/failed-to-load-library-OLEPRO32-DLL/m-p/3700047...

• I am running windows vista sp2 and I get an error message "cannot load resource dll" How can I fix the problem.

  Have noticed that my history of visited web sites is saved is more and the error message above appears whenever I start my laptop, I tried to download ie9 instead of run the ie8 I have, he (ie9) is not installed. I have also tried to use the repair and fix the items, but they don't work anymore. can anyone help? TY

  Hi John,.

  (1) how long have you encountered this problem?

  (2) what is the complete error message you receive at startup?

  (3) do you get an error message when you try to install Internet Explorer (IE)?

  (4) are what patches you referring? What happens when you try to invoke?

  Method 1:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.
  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  You can see the steps by Afzal T and Azeez N in the links below to solve problem of navigation history

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/Internet-Explorer-will-not-save-history/c06284ac-595e-400F-831C-7aa79948de1d

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/Internet-Explorer-8-does-not-save-all-history/3533d7d4-72de-45B9-AAE9-1db7b6cba5d7

• How can I get rid of the startup of the computer, error message cannot load msmgr32.dll

  whenever I start my Vista Dell laptop-driven, I get the above message, how to solve this problem

  Hi Isbaines,

  This can happen due to a conflicting third-party application.  You can try to perform a clean boot and see if it helps:

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After you resolve the problem, see the section on boot link to how to restore your computer to a Normal startup mode.

  Hope this information is useful.

• Problem with drivers - error: "Cannot find EBLib.dll" - Satellite A110

  Hello
  Since last summer, I have a Satellite A110. I formatted it in order to install Windows XP Pro. I found and downloaded the drivers and the HotKey Utility software, boot, I have a nice error message that says "cannot find the EBLib.dll."
  I searched the web, and I've not found anywhere to download this DLL. On the site Web of Toshiba, the same thing...: s

  Where can I find this dll?

  NB: Please excuse my language, but I'm not English: P

  Thank you very much

  Hello

  These problems may occur if you do not install the drivers and tools in the correct order.
  You will find this order on the pilot, called installation instructions download page.

  Good bye