[Error] Cannot synchronize the project first Clips to creative cloud

Similar Questions

• Cannot open the project first exported from After Effects

  I was working on something in After Effects, basically just audio and video clips. Editting really. I decided, would be faster in the first, so I exported to a project of creation of it.  When I try to load it in first I get an error "the project seems damaged, it cannot be opened.  Does anyone know if there is a way to solve this problem?

  It does not cause a problem for me, and we have heard this on the forum that I can remember.

  Try to create a new model in a new project. Add some video and audio. Who exports OK?

  I don't want to be rude and in no case I want to be insulting, but I'd feel bad if I didn't, and it turns out to be the problem...

  Since it is the symptom if you try to open a project created in Ae with Premiere Pro CS6 - Pr please check that you open the good Premiere Pro. I forget what icon which is timely and open CC I want to open CS6, although I never did the opposite error. Yet.

• Cannot create the folder of files of creative cloud.

  I get this message when I try to synchronize files with creative cloud folder:

  

  I tried the options and close the program and restart the computer, but not luck.

  I had the same problem. SOLVED

  Looking at the lines CoreSync-YYYY-MM - DD.log , I noticed about corruption .db messages in the CoreSync directory.

  I resolved to rename

  \AppData\Roaming\Adobe\CoreSync C:\Users\

  in

  \AppData\Roaming\Adobe\CoreSync.old C:\Users\

  Before to rename you must be sure that the creative cloud application is not running.

  Then, turned off the option "Start connecting" in the preferences, then longin again.

  After the connection, rename and then manually start the creative Application of cloud.

  The application creates a new directory CoreSync, and it starts the sync!

  If this work for you, then you can remove safely the CoreSync.old directory.

  Ivano.

  ------------------------------------------------------------------------------------------ ------------------------------

  8.1 window

  Cloud creative version 2.1.3.121

  Photoshop CC 2015

• I have Adobe have accessed and cannot find the code for redemption for creatively Cloud

  Help! I'll try to find my redemption code for the cloud creative plan that I signed up for yesterday. Have followed all the steps, signed in my Adobe ID etc. and can't find it. Can someone please help -thank you, Ona.

  There is no redemption code.

  Once you have signed up, you sign in to your Adobe account, download the Cloud app then download the software.

  Will be asked to enter a redemption code?

• Convert project first Clip for Premiere Pro project fails... What I am doing wrong?

  I created my first video on my iPad and now want to refine the project in Premiere Pro. I looked at him "refine a Clip of first video in Premiere Pro" and followed all the steps, but something is wrong.

  Although the XML file (and Media folder) if poster in my CC property is not available for first Pro CC (2015.2) when I choose «Convert Premiere Clip project...» ».

  I was able to import a video MP4 Roughcut, but cannot change the actual project. I tried to send the bill back (whenever 'Envoys OK' confirmation appears) & reboot PP, but it does not help. I am connected to my Adobe CC account on all devices.

  Really enjoy working with Premiere Clip, but the app is of limited use to me if I can't send Premiere Pro clip projects successfully. Help appreciated.

  Thank you

  Felicia Lovelett

  Hi Felicia,

  Sorry, you have problems! You have the desktop app creative Cloud installed, with synchronization of file running? This will synchronize your projects first Clip and media locally on your computer, allowing Premiere Pro to open. (If you only synchronize your active CC Web Storage, Premiere Pro is not able to access.)

  From the desktop application creative cloud in your menu bar, click the gear icon, and then click Preferences. Click the files tab, and verify that the synchronization is on. Here is also where you can see the location of your creative cloud on your computer folder. When you choose "Convert first Clip Project" in Premiere Pro, it should point to this folder on your computer.

  Please let me know if it helps!

  Thank you

  Bronwyn

• ORA-07391: sftopn: fopen error, cannot open the text file.

  Hello
  
  The last 3 days, we get the error in the alert below log.
  
  [ORA-00600: internal error code, arguments: [kmgs_parameter_update_timeout_1], [27091] [] [] [], [], []]
  ORA-27091: unable to queue I/O
  ORA-27072: IO file error
  
  I check as the same partners to it in metalink I found permission to check the directory solution. (DOC ID367619.1)
  I got permission from ORACLE_HOME\dbs $ to 777, but still m making the same mistake.
  
  also I try to recreate spfile so that I try to create pfile first
  
  create pfile from spfile
  
  I get the error below.
  
  ORA-07391: sftopn: fopen error, cannot open the text file.
  
  ls - lrt sp * in the below output shows $ORACLE_HOME
  
  -rwxrwxrwx 1 ora10g 3584 20 September dba10 05:42 < SID > spfile .ora
  
  Help, please.
  
  Thanks in advance

  user8757749 wrote:
  The output of ls - lrt is in the path $ORACLE_HOME\dbs only

  We also have the database version 10.2.0.4 that the spfile even uses everyday cold backup of the database.

  also, I put the 777 permission to the file.

  OK, I guess there will be corruption of the SPFILE as if edited manually or in any other cases too.

  You have a backup of SPFILE? backup of the file PFILE or?

  then starting using this SPFILE, if any backup then start with PFILE and then create SPFILE from PFILE.

  Otherwise, you can copy the contnets of the parameters of the alert log file initialization and paste in the editor and the instance of starutp.

  These are the options.

• Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  I recently noticed this error message-

  Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  whenever I try to click on a card game.  Help, please!  Is there something I can download again to fix this error?

  Hi jaymeister3580,

  It seems that the problem is related to the installation of the game itself, I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below. The following steps are worth a try:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check if the problem persists

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• nitro loading a pdf editor and this error comes we - error cannot install the single window service

  someone sees this error I'm not able to load my nitro now and it has always worked.  error saying error-could not install the stop service my other programs such as microsoft office.

  Hi Sandra,.

  Thanks for posting in the Microsoft community

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  Q10271 - PRB: error: cannot install the Windows Service
  http://KB.nitropdf.com/article.aspx?ID=10271

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Error: Cannot open the file: 1

  [INFO]              Parsing of the command line options
  [INFO]              Bbwp.properties analysis
  [INFO]              Validation of archive WebWorks
  [INFO]              The analysis of config.xml
  [INFO]              The application of filling source
  [INFO]              Compiling applications WebWorks
  [INFO]              Packaging of the record bar
  Error: Cannot open the file: 1

  Once I rebooted my machine it worked... But I dint knew why this error occurred

• cannot synchronize the canon elph 350hs for computer

  cannot synchronize the canon elph 350hs for computer - it keeps saying I need to download the software I did

  check and install the software in this link

  http://www.Canon.ca/inetCA/en/products/method/GP/PID/43924

  If it fails to request additional support from the same canon link

• ASP - function Remote - error: cannot run the trigger

  Hello

  I tried to get my macros being run by a remote server.

  It's my function file remote named "remote_test_pc.asp":

  framework integrated; then

  conf t

  interface $INTERFACE

  Description macro $TRIGGER

  PC-VoIP-Port Description

  switchport access vlan $ACCESS_VLAN

  switchport mode access

  switchport vlan voice $VOICE_VLAN

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  no event log status link

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no link-status of snmp trap

  spanning tree portfast

  spanning tree enable bpduguard

  service-policy input PO_TRUST-PHONE

  output

  end

  FI

  framework integrated; then

  conf t

  interface $INTERFACE

  No description of macro

  Description by DEFAULT-CONFIG

  switchport mode access

  switchport access vlan 999

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  spanning tree portfast

  No switchport voice vlan $VOICE_VLAN

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no service-policy input PO_TRUST-PHONE

  FI

  output

  end

  FI

  And this is my config on the switch to mac-group and the macro:

  !

  macro auto Test group address-mac-PC

  Mac 0019.9990.5509 address list

  !

  comprehensive treatment of the auto macro

  macro auto control global detection mac address

  !

  automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127

  !

  When I plug this workstation for the following syslog messages:

  Switch #.

  Remote_test_pc.asp loading!

  [OK - 1702/4096 bytes]

  Enter configuration commands, one per line.  End with CNTL/Z.

  Switch con0 is now available

  Press RETURN to get started.

  Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function

  26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console

  26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message

  Switch #.

  The port works as it should, but I wonder about the error message.

  The switch is 2960 with IOS 12.2 (58) SE2.

  Can someone explain what this means?

  Thank you very much!

  Sven

  Hi Sven,

  I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.

  Thank you

  Ankur-

• get the 1726 error: cannot add the port monitor

  get the 1726 error: cannot add the port monitor hp discovery port monitor (hp photosmart 5525 series) running Windows XP, HP Photosmart 5525

  Could not complete the installation.

  Hi Jeff,

  The computer manufacturing must have created a partition on the disk or provided you CD to restore the computer to the way it was when you bought it. If you have a PC clone, then probably you need to reformat your hard drive and reinstall the operating system. If you have an OEM computer (example: HP, Dell, ETC) there is most likely instructions when you turn on/off press F11 or F12 to return the computer to the computer.

  Note: Do nothing until you have all of your backup data.

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• Cannot open the project elements

  Hello!

  I use a MacBook Pro, El Captain, 2.4 GHz Intel Core i5, 16 GHz RAM

  Adobe Premiere Elements 12

  After you have created and saved a project I restarted my Mac. Then, after a restart I could not open the projector-elements:

  The following message if poster (in German) appeared: 'ist Das Projekt offenbar beschadigt. ES kann nicht open werden' (the project seems to be defective. It cannot be opened).

  I rebooted again and also tried to open project saved automatically - the same result files. Cannot open the project.

  Does anyone know how to save the movie...?

  Thank you in advance!

  Good news! Please mark this question as answered.

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit