Cannot open the project first exported from After Effects

Similar Questions

• Cannot open the project elements

  Hello!

  I use a MacBook Pro, El Captain, 2.4 GHz Intel Core i5, 16 GHz RAM

  Adobe Premiere Elements 12

  After you have created and saved a project I restarted my Mac. Then, after a restart I could not open the projector-elements:

  The following message if poster (in German) appeared: 'ist Das Projekt offenbar beschadigt. ES kann nicht open werden' (the project seems to be defective. It cannot be opened).

  I rebooted again and also tried to open project saved automatically - the same result files. Cannot open the project.

  Does anyone know how to save the movie...?

  Thank you in advance!

  Good news! Please mark this question as answered.

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• RTE de LV cannot open the project files that include references .lvlib in dependencies

  I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:

  • Project.Open returns error 7 (file not found)
  
  
  • Project.GetFileLVVersion is a success

  Here are some excerpts from my code of G and C engaged in this behavior:

  

     int openStatus = StatusSuccess;
  
     char * projectVersion = createStringWithLength (VersionStringLength);
  
  printf ("Analysis %s\n", pathchaine);
  
     OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);
  
     printf ("  project written in LabVIEW %s\n", projectVersion);
  If (openStatus is StatusSuccess)
  
     {
  
        printf ("  Open the project file.") \n") ;
  
     }
  
     on the other
  
     {
  
        printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")
  
     }

  However, when running in the development environment, the two methods are successful.

  Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

  Here's how you can reproduce:

  Prerequisites:

  1. LabVIEW 2013 SP1 32-bit
  
  
  2. ConEmu for a good console- https://code.google.com/p/conemu-maximus5/wiki/Downloads
  
  
  3. minGW for compilation of a program to use the LabVIEW - http://sourceforge.net/projects/mingw/files DLL

  reference .lvlib to break dependencies Project.Open in LV RTE

  1. Open the attachment in a temporary directory (e.g. c:\xtra\temp)
  
  
  2. Open "OpenProject.lvproj" in LabVIEW.
  
  
  3. Build 'Open library project'.
  
  
  4. ConEmu with a bash command prompt, navigate to the temporary directory.
  
  
  5. Type make
  
  

  $ make
  
  patch the file "builds/platdefines.h.
  
  GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds

  
  

  6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.
  
  Analysis c:\xtra\temp\OpenProject.lvproj
  
    Project written in LabVIEW 13.0
  
    Open the project file.

  
  

  7. the opinion that both call nodes execute correctly.

  8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject

  OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.
  
  Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
  
    Project written in LabVIEW 13.0
  
  Error: Could not find the project file or file was not a project file (error code 7).

  
  

  9. notice that the node version managed while the open failure.

  10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

  $ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
  
  -OpenProject.lvproj  kills Nov  4 11:28:28 2014
  
  +++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014
  
  @@-13,7 + 13.11 @.
  
         true
  
         fake
  
         
  
  -      
  
  +      
  
  +          
  
  +              
  
  +          
  
  +      
  
         
  
            
  
               true

  Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:

  1. Open "OpenProject.lvproj" in LabVIEW.
  
  
• Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.


• Select ""leader "Save All (this project)" and use the default name for the new VI.


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.


• Remove the "Application Directory" path of file constant


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Note that the problem has disappeared, as is expected.


• Add the "Application Directory" path of file constant in the block diagram.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.


• Close the new VI and pull out of the project.


• Select ""leader "Save All (this project)"


• Open "OpenProject.lvproj" in a text editor.


• Note that the dependencies item was put away.


• Add VI back to the project.


• Select ""leader "Save All (this project)"


• Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject


• Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

• Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

• Cannot open the project

  I am trying to open a project on another computer, but I'm having some trouble. I followed the steps of the tutorial: http://agile.csc.ncsu.edu/SEMaterials/tutorials/import_export/ but I have a red exclamation point icon when I open the project. The classes are riddled with red error and it cannot be run in the Simulator (Run As - > Simulator does nothing). I noticed that the file on the first computer has a net_rim_api jar file and the other is not. I don't know if this is the problem and if it is I don't know how to import it. The error given by the section of the problem of the eclipse is:

  "Project cannot be built until the path of errors are resolved" and "container Unbound classpath: ' JRE System Library [BlackBerry JRE 6.0.0] project"MyProject"

  
  

  The appropriate BlackBerry Java SDK has been installed in Eclipse on machine problems?

• Implementation error "Adobe RoboHelp 8 has encountered a problem... ».  Cannot open the project

  Windows XP / RH8 / RoboSource Control 3.1

  Tried to open a project that I have not consulted for while.   After you click Yes or no to the question «Get latest...» "I get the error"Adobe RoboHelp 8 has encountered a problem and needs to close.  We are sorry for the inconvenience. »

  I tried several times with the same results.  Forum search finds several results, but see nothing that corresponds to that.

  I think it may be a project file to remove that can allow me to open the project, but thought I should ask first.

  Any help will be greatly appreciated.

  Joe

  Remove the CPD file allowed me to open the project in HR

• Cannot open the project (CS4 - trial)

  After futzing and cleaning several projects, I am now unable to open them.  Maybe I changed the video preview of Microsoft AVI to I-Frame.  I get the following message appears when I try to open the projects:

  The draft contained a sequence that could not be opened.  No preview of the sequence is preset file or codec might be associated with this type of sequence.

  Is there a way to fix this situation rather than having to start over from scratch as I already have one project?

  Advice, suggestions or any errata would be most welcome!

  Futzing and caused cleaning, or the trial version. The trial does not support anything MPEG.

• Cannot open the project created during the trial period

  I've made use of the 7 day trial period and started with two projects. After 7 days, I have purchased Premiere Pro for a month. Now I can't open the projects more. The error message is: it should contain a sequence that could not be opened. No preview of the sequence is preset file or codec might be associated with this type of sequence...

  Very strange and annoying. It seems that the trial had several codecs then the product? Projects already took me many hours, so it bothers me really, mostly because I thought that I must pay for exactly the same product I have used during the trial.

  What can I do about it?

  Missing features and sequence Presets - sequence could not be opened

• RH8 Word cannot open the project RHx5

  I REALLY have to update an existing project of RHx5 WinHelp. We have updated last year from Office 2003 to 2007, which forced / allowed me to update RHx5 RH8 and RH8 for Word has been installed on my XP pc.

  Tried to open the project RHx5 and received the error: bad DLL calling convention (error 49)

  Given that the attempt had opened a blank Word document, I tried to close it, but failed, with an another error message indicating that a dialog box is open - despite no dialog being visible at this time.

  Can anyone offer helpful suggestions or advice?  I would be very grateful, because our software (rather old) depends on ID card HR to provide contextual assistance.

  See extract of 92.

  http://www.Grainge.org/pages/snippets/snippets.htm

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Cannot open the project; Cannot find the folder for this project

  I have Encore CS4 and when I opened it, I clicked on "Create a new project" and he chose my office as the location target. Then when I click on the file from my desktop or reminder, I get the following message appears: "unable to open the project; This project file was not found. But the folder and the file exist. The file extension is .ncor what I am doing wrong?

  Still worked for you before?

  If so, what has changed?

  If not, you run as administrator?

• Exporting from After Effects to Final Cut Pro

  Hello

  Could someone tell me the best way to export to After Effects, in the Final Cut Pro? This I must have Automatic Duck for this, if yes which?

  Thanks for any help!

  Matt

  You must add your composition to the queue made and then export to the same format and codec you use in FCP. Automatic Duck is a great tool for your FCP or motion to enter into After Effects timelines, but most of the time I simply select an item in the PCF, export it as a sequence of reference, put in AE for treatment, then make a file to use as a substitute for the CPF.

  Search by effects Final Cut Workflow and you'll find some more tips including this one. It is not bad for the body, but it misses the point to use the same codec. All my FCP projects are ProRez HQ or 444 ProREZ it's my choice. Also, if you use the shooting together, which isn't a bad idea, you can use the option to replace footage in FCP that is more effective that technique demoed drag your shot made in the timeline and then cut if necessary.

  I hope this helps.

• Cannot open the project after the reinstallation of RoboHelp 8

  My computer crashed and I had to Reinstall RoboHelp 8.  When I tried to open my project, I got a message saying that the project is from a newer version of the program.  This project is no longer compatible with this version.  Then I did the 8.x updates and got the same results.

  What do you think the problem is here?  My RoboHelp is a upgraded version, and I do not know what version it was modernized at the origin of.  Everything worked perfectly before that.

  In addition, my computer installed Windows 7 on my computer and I already had Vista - what part of the problem?

  I need to get this project open and run as soon as possible.

  Thanks for any help that anyone may be able to offer.

  What you should not have done, is to open a project before you apply the updates. See the projects on my site.

  It's very late here now. Post your progress and I'll look in the morning.

  Maybe remove the CPD will fix. First backup.

• First Elements 11. Cannot open the project (file PREL) in point 8.1 of Windows.

  I created the project (file PREL) in the first 11 elements in the Windows 7 Professional environment. I was able to open it without problem.

  Now I have Windows 8.1. When I try to open this project, I have a saying "this file type is not supported, or the required codec is not installed."

  Help!

  Levalt

  Thanks for the reply.

  When you import media source in a first Elements (any version), you are not importing real media. What you have in the media of the project are copies of the originals which are stored in the designated place hard drive. But the project needs to trace these originals to the save location as they were when they were imported in the project. If you move the source media, delete rename them or even that they are in the folder, you will encounter some bad media reconnect issues. At this point, the message "Where is the file...?" that you get when you try to reopen the saved closed project will be a major asset by her reconnects. Alternatively, you can use the function replace images for her reconnects.

  The following links go to the above factors...

  http://help.Adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html

  http://www.atr935.blogspot.com/2013/04/pe11-replace-footage.html

  Troubleshoot damaged projects | Adobe Premiere Elements

  Do not hesitate to ask if you have additional questions on this or need for clarification on what written.

  Best wishes.

  RTA

• Line tool misaligned and cannot resolve the race (.dxf exported from sketchup)

  I've been using illustrator for this purpose for many years still today when I try to draw lines to complete the .dxf exported from sketchup lines lines and to her are still perhaps 1/8 ". Also, I can't set the race of 1 PT. LMK if someone had this problem and if you do not see the file I'm working on I have the link below.

  Thank you

  Gro FloorPlanBase 4.28.ai - Google Drive

  OK had to use turn off my dark cookie and use google chrome to get your file.

  So you can see that some parameters are set to align on the pixel grid, and after the name in your window you have RGB.

  

  1. Click on the dashboard to align to grid of stack and change the empty box
  2. File > Documents color Mode > CMYK
  3. Transform flyout, unchecked align new elements to the network stack

  

  This can happen when you make a new document and web document profiles has been used, or some gave you the file in this way. In the screenshot below you want to watch for change RGB to CMYK and snap to grid of uncontrolled battery

  

• [Error] Cannot synchronize the project first Clips to creative cloud

  Hi guys,.

  I tried Sync Clips first to the CC and continue in Premiere Pro.

  Synchronization file or record a video on the CC is not a problem. I see the video file arise. Although I continue to have problems synchronizing a project.

  I have this weird feeling that this is the language barrier. Creation of Clips is in Dutch on my phone while Premiere Pro is English.
  But I can't change the language of the application in English anywhere.

  This is the error message I get:

  

  He translated means something like this:
  
  

  "Oops!"

  Looks like something was wrong and we couldn't send your project to the cloud creative.
  We cannot copy your project to the cloud creative directory. Check your account and try again. »

  Does anyone else have this problem? And is there a solution for this?

  Hoping for an answer.

  See you soon

  Hi Leroy,

  Sorry to hear you were having trouble and thank you for bringing This problem to our attention! Version 1.0.3 of first Clip on Android, now available in the game store, addresses this problem. Please keep us informed if you still cannot complete the workflow for a reason any.

  Thank you

  Bronwyn