Error code: 0x80072F8F

Error code: 0x80072F8F while installation of windows updates... ?

Kind regards
Sohail Patel Regds, "a journey of a thousand miles begins with a first step."

Resolution: error code: 0x80072F8F

To resolve this problem, use the following methods in the order in which they are presented. If a method does not resolve this problem, proceed to the next method.

 

Method 1: Check and adjust the date and time settings to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Click on start and then click on run.
  2. In the open area, type Timedate.cpl, and then click on OK.
  3. The Date and time tab , make sure that the date and time of the computer are correct. If the settings are incorrect, adapt them to the correct date and time.
  4. Click on OK to close the properties of the Date and time dialog box.
  5. Try to install updates again.

Windows Vista and Windows Server 2008

  1. Click on the Start

    The collapse of this image enlarge this image

    , type timedate.cpl in the Search box and then click on Timedate.cpl on the list of programs.

  2. The Date and time tab , make sure that the date and time of the computer are correct. If the settings are incorrect, click on the date and change of .

    The collapse of this image enlarge this image

    If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. In the Date and time dialog box, use the following procedures:
    • To change the date

      Under Date, click the left or right arrows to find the current month in the calendar, and then the current date.

    • To change the time

      In time, double-click the hour, minutes, or seconds that you want to change, and then click the arrows to increase or decrease the value.

  4. When you complete the change of date and time, click on OK.
  5. Try to install updates again.

Method 2: Install the latest update on the certificate root of the Microsoft Note use this method if you are running Windows 2000, Windows XP, or Windows Server 2003.

To install the most recent update of the root certificate, visit the following Microsoft Windows Update Web site:

http://update.Microsoft.com/windowsupdate (http://update.microsoft.com/windowsupdate)

To find the root certificate update, use Windows Update to scan the computer, and then click software, optional. The update of root certificate appears under the updated software optional header.

This item updates the root certificates of list to the latest list that is accepted by Microsoft as part of the certificate program root Microsoft. When you add multiple root certificates to the computer, leave you a wider range of applications work seamlessly. These applications include applications that provide improved security encrypted e-mail, Web browsing and secure code delivery.

After you install this update, you may have to restart the computer. For more information about the Microsoft root certificate program members, refer to the Microsoft Web site at the following address:

http://msdn2.Microsoft.com/en-us/library/ms995347.aspx (http://msdn2.microsoft.com/en-us/library/ms995347.aspx)

To install the last certificate root for Windows XP, see the Microsoft Web site at the following address:

http://www.Microsoft.com/downloads/details.aspx?FamilyId=F814EC0E-EE7E-435E-99F8-20B44D4531B0&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyId=F814EC0E-EE7E-435E-99F8-20B44D4531B0&displaylang=en)
 

Method 3: Click to uncheck the "Check for server certificate revocation" Note use this method if you are running Windows 2000, Windows XP, or Windows Server 2003.

  1. Start Internet Explorer.
  2. In the Tools menu of , click on Internet Options .

    Note If you don't see the Internet Explorer menu bar, press the ALT key to display the menu.

  3. Click on the tab advanced and then search for it Security section.
  4. Turn it off check the box check the CRL and then click on OK.
  5. Restart the computer.
  6. Try to install updates again.
 

Method 4: Save the Softpub.dll, Wintrust.dll, Initpki.dll and Mssip32.dll file to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Click on start and then click on run.
  2. In the open box, type the names of the following files. Click on OK after each file name:
    • regsvr32 Softpub.dll/s
    • regsvr32 Wintrust.dll/s
    • regsvr32 Initpki.dll/s
    • regsvr32 Mssip32.dll/s

Windows Vista and Windows Server 2008

  1. Click Start

    The collapse of this image enlarge this image

    , type regsvr32 Softpub.dll/s in the box start looking for , and then click OK.

    The collapse of this image enlarge this image

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. Repeat step 1 for the following file names:
    • regsvr32 Wintrust.dll/s
    • regsvr32 Initpki.dll/s
    • regsvr32 Mssip32.dll/s

Kind regards

Sohail Patel

Regds, 'a journey of a thousand miles begins with a first step."

Tags: Windows

Similar Questions

  • When I go to download Windows 10 I get an error code 0x80072F8F-0 x 20000.

    Hi when I go to download Windows 10 getting an error code 0x80072F8F-0 x 20000.

    Any ideas what this means.

    See you soon

    OT:

    Windows 10

    Try to reset the update components and try again:

    How to reset the Windows Update components

    http://support.Microsoft.com/kb/971058

    Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

    How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7/8/8.1

    http://support.Microsoft.com/kb/929135

    Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

    I suggest before you stop and install the updates, disconnect from the Internet, first.

    If this does not work, try to update manually:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  • EError Code: 0X80072F8F (can't connect to WSUS)

    I pulled my hair out trying to fix WUS. I couldn't connect/update manually or automatically for updates on August 2. I ran across a list of the Solutions of Windows 7, Microsoft Help, answers and Forums. I troubleshoot-performed/re-regersterd/sync a wm32tm. I have reinstalled manually the agent update Windows to the current address. I've re-registered to .dll either manually, or through MicrosoftFixit. I ran update readiness tool.  I have checked the Services for Windows Update and Windows Time settings. I have checked/checked the firewall settings. I have checked/verified Virus/Malware protection settings. Here is my system and the journal of WU. Does anyone have the answer? Thank you.

    Dell Studio XPS 1645 laptop computer i7

    Windows 7 Ultimate, 64-bit

    Running - ESET NOD32 v4, Spybot, Windows Defender, Windows Firewall

    JOURNAL OF WU =.

    2010-08-29 12:07:55:808 612 a34 detection with initiating at THE via API DetectNow
    2010-08-29 12:07:55:808 612 a34 to online (interactive) detection triggering
    2010-08-29 12:07:55:809 612 a04 to THE #.
    2010-08-29 12:07:55:809 612 a04 to THE # START # to THE: research updates
    2010-08-29 12:07:55:809 612 a04 to THE #.
    2010-08-29 12:07:55:812 612 to THE a04<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">
    2010-08-29 12:07:55:812 612 478 Agent *.
    2010-08-29 12:07:55:812 612 478 Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
    2010-08-29 12:07:55:812 612 478 Agent *.
    2010-08-29 12:07:55:812 612 478 Agent * Online = Yes; Ignore download priority = No
    2010-08-29 12:07:55:812 612 478 Agent * criteria = "IsInstalled = 0 and DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and 'Installation' and = 1 RebootRequired = DeploymentAction or IsInstalled = 0 and DeploymentAction = 'Uninstall' and RebootRequired = 1".
    2010-08-29 12:07:55:812 612 478 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} third service
    2010-08-29 12:07:55:812 612 478 Agent * scope of search = {Machine}
    2010-08-29 12:07:55:814 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2010-08-29 12:07:55:827 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:07:59:337 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2010-08-29 12:07:59:343 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:07:59:353 612 478 Agent looking for updates auth cab for 7971f918-a847-4430-9279-4a52d1efe18d tohttp://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab service
    2010-08-29 12:07:59:353 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
    2010-08-29 12:07:59:357 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:00:175 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
    2010-08-29 12:08:00:179 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:00:179 612 478 checking for SelfUpdate agent installation
    2010-08-29 12:08:00:179 612 478 version of the configuration Client: Core: 7.4.7600.226 to the: 7.4.7600.226
    2010-08-29 12:08:00:182 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2010-08-29 12:08:00:185 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:00:945 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2010-08-29 12:08:00:949 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:00:952 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2010-08-29 12:08:00:957 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:03:121 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2010-08-29 12:08:03:126 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:03:130 612 478 Setup jump SelfUpdate check based on the /SKIP directive in wuident
    2010-08-29 12:08:03:130 612 478 Setup SelfUpdate check filled.  SelfUpdate is NOT necessary.
    2010-08-29 12:08:03:409 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
    2010-08-29 12:08:03:413 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:03:536 612 478 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
    2010-08-29 12:08:03:540 612 478 Misc Microsoft signed: Yes
    2010-08-29 12:08:03:543 612 478 PT +++ PT: Synchronizing server updates +++
    2010-08-29 12:08:03:543 612 478 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, URL of the server =https://www.update.microsoft.com/v6/ClientWebService/client.asmx
    2010-08-29 12:08:05:361 612 478 Misc WARNING: send failed with hr = 80072f8f.
    2010-08-29 12:08:05:361 612 478 Misc WARNING: SendRequest failed with hr = 80072f8f. Used proxy list: <(null)>list workaround used: <(null)>Auth schemes used:<>
    2010-08-29 12:08:05:361 612 478 PT + last proxy request failed with hr = 0x80072F8F = 0 HTTP status code
    2010-08-29 12:08:05:361 612 478 PT plus caller identification information provided is no.
    2010-08-29 12:08:05:361 612 478 PT + flags Impersonate = 0
    2010-08-29 12:08:05:361 612 478 PT plus Possible authorisation schemes used is
    2010-08-29 12:08:05:362 612 478 PT WARNING: methods failed, error = 0x80072F8F error in the soap client = 5, error = 0, status = 200 HTTP code soap code
    2010-08-29 12:08:05:362 612 478 PT WARNING: PTError: 0x80072f8f
    2010-08-29 12:08:05:362 612 478 PT WARNING: GetConfig_WithRecovery failed: 0x80072f8f
    2010-08-29 12:08:05:362 612 478 PT WARNING: RefreshConfig failed: 0x80072f8f
    2010-08-29 12:08:05:362 612 478 PT WARNING: RefreshPTState failed: 0x80072f8f
    2010-08-29 12:08:05:362 612 478 PT WARNING: synchronization of updates: 0x80072f8f
    2010-08-29 12:08:05:362 612 478 PT WARNING: SyncServerUpdatesInternal failed: 0x80072f8f
    2010-08-29 12:08:05:362 612 478 Agent * WARNING: could not synchronize, error = 0x80072F8F
    2010-08-29 12:08:05:363 612 478 Agent * WARNING: exit code = 0x80072F8F
    2010-08-29 12:08:05:363 612 478 Agent *.
    2010-08-29 12:08:05:363 612 478 Agent * END * Agent: finding updates [CallerId = AutomaticUpdates]
    2010-08-29 12:08:05:363 612 478 Agent *.
    2010-08-29 12:08:05:363 612 478 Agent WARNING: customer WU didn't search for the update with the 0x80072f8f error
    2010-08-29 12:08:05:364 612 to THE dc4 > # RETURN # to THE: research updates [CallId = {2CC30812-6451-4D07-AA37-B519987AB48B}]
    2010-08-29 12:08:05:364 612 to dc4 # WARNING: reminder of search failed, result = 0x80072F8F
    2010-08-29 12:08:05:364 612 to dc4 # WARNING: could not find updates with error code 80072F8F
    2010-08-29 12:08:05:364 612 to THE dc4 #.
    2010-08-29 12:08:05:364 612 dc4 to # END # in THE: research updates [CallId = {2CC30812-6451-4D07-AA37-B519987AB48B}]
    2010-08-29 12:08:05:364 612 to THE dc4 #.
    2010-08-29 12:08:05:364 612 to THE dc4 successfully wrote event to THE health state: 0
    2010-08-29 12:08:05:364 612 dc4 to THE timeout parameter next detection at 2010-08-29 23:08:05
    2010-08-29 12:08:05:365 612 to THE dc4 successfully wrote event to THE health state: 0
    2010-08-29 12:08:05:365 612 to THE dc4 successfully wrote event to THE health state: 0
    2010-08-29 12:08:10:363 612 478 report REPORT EVENT: {0EE2CC8C-0BE8-4E27-8AB8-8CD7E33A7BE6} 12:08:05:363 2010-08-29 - 0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80072f8f AutomaticUpdates outage software to sync Windows Update Client did not detect with error 0x80072f8f.
    2010-08-29 12:08:10:368 612 478 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
    2010-08-29 12:08:10:368 612 478 WER sent report: 7.4.7600.226 0x80072f8f 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
    2010-08-29 12:08:10:368 612 478 report CWERReporter finish event management. (00000000)
    2010-08-29 13:55:47:187 6456 8(c) Misc = logging initialized (build: 7.4.7600.226, tz:-0600) =.
    2010-08-29 13:55:47:187 6456 8(c) Misc = process: c:\program files\windows defender\MpCmdRun.exe
    2010-08-29 13:55:47:187 6456 8(c) Misc = Module: C:\Windows\system32\wuapi.dll
    2010-08-29 13:55:47:187 6456 8(C) COMAPI -.
    2010-08-29 13:55:47:188 6456 8(c) COMAPI - START - COMAPI: search [ClientId = Windows Defender]
    2010-08-29 13:55:47:188 6456 8(C) COMAPI -.
    2010-08-29 13:55:47:193 6456 8(C) COMAPI<-- submitted="" --="" comapi:="" search="" [clientid="Windows">
    2010-08-29 13:55:47:193 612 1 b 14 Agent *.
    2010-08-29 13:55:47:193 612 1 b 14 Agent * START * Agent: finding updates [CallerId = Windows Defender] of
    2010-08-29 13:55:47:193 612 1 b 14 Agent *.
    2010-08-29 13:55:47:193 612 1 b 14 Agent * Online = Yes; Ignore download priority = No
    2010-08-29 13:55:47:193 612 1 b 14 Agent * criteria = "(IsInstalled = 0 et IsHidden = 0 et contient de la CategoryIDs ' 8c3fcc84-7410-4a95-8b89-a166a0190486' et CategoryIDs contient ' e0789628-ce08-4437-be74-2495b842f43b')" "
    2010-08-29 13:55:47:193 612 1 b 14 Agent * ServiceID = {00000000-0000-0000-0000-000000000000} third party service
    2010-08-29 13:55:47:193 612 1 b 14 Agent * scope of search = {Machine}
    2010-08-29 13:55:47:597 612 1 b 14 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2010-08-29 13:55:47:599 612 1 b 14 Misc Microsoft signed: Yes
    2010-08-29 13:56:01:506 612 1 b 14 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2010-08-29 13:56:01:511 612 1 b 14 Misc Microsoft signed: Yes
    2010-08-29 13:56:01:519 612 1 b 14 Agent looking for updates auth cab for 7971f918-a847-4430-9279-4a52d1efe18d tohttp://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab service
    2010-08-29 13:56:01:519 612 1 b 14 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
    2010-08-29 13:56:01:521 612 1 b 14 Misc Microsoft signed: Yes
    2010-08-29 13:56:01:635 612 1 b 14 Misc validation signature for C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
    2010-08-29 13:56:01:640 612 1 b 14 Misc Microsoft signed: Yes
    2010-08-29 13:56:01:881 612 1 b 14 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
    2010-08-29 13:56:01:884 612 1 b 14 Misc Microsoft signed: Yes
    2010-08-29 13:56:01:990 612 1 b 14 Misc validation signature for C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
    2010-08-29 13:56:01:995 612 1 b 14 Misc Microsoft signed: Yes
    2010-08-29 13:56:06:455 612 1 b 14 Misc WARNING: send failed with hr = 80072f8f.
    2010-08-29 13:56:06:455 612 1 b 14 Misc WARNING: SendRequest failed with hr = 80072f8f. Used proxy list: <(null)>list workaround used: <(null)>Auth schemes used:<>
    2010-08-29 13:56:06:455 612 1 b 14 PT + last proxy request failed with hr = 0x80072F8F = 0 HTTP status code
    2010-08-29 13:56:06:455 612 1 b 14 PT plus caller identification information provided is no.
    2010-08-29 13:56:06:455 612 1 b 14 PT + Impersonate flags = 0
    2010-08-29 13:56:06:455 612 1 b 14 PT plus Possible authorisation schemes used is
    2010-08-29 13:56:06:455 612 1 b 14 PT WARNING: methods failed, error = 0x80072F8F error in the soap client = 5, error = 0, status = 200 HTTP code soap code
    2010-08-29 13:56:06:455 612 1 b 14 PT WARNING: PTError: 0x80072f8f
    2010-08-29 13:56:06:455 612 1 b 14 PT WARNING: GetConfig_WithRecovery failed: 0x80072f8f
    2010-08-29 13:56:06:456 612 1 b 14 PT WARNING: RefreshConfig failed: 0x80072f8f
    2010-08-29 13:56:06:456 612 1 b 14 PT WARNING: RefreshPTState failed: 0x80072f8f
    2010-08-29 13:56:06:456 612 1 b 14 PT WARNING: StartCategoryScan failed: 0x80072f8f
    2010-08-29 13:56:06:458 612 1 b 14 Agent * WARNING: exit code = 0x80072F8F
    2010-08-29 13:56:06:458 612 1 b 14 Agent *.
    2010-08-29 13:56:06:458 612 1 b 14 Agent * END * Agent: finding updates [CallerId = Windows Defender] of
    2010-08-29 13:56:06:458 612 1 b 14 Agent *.
    2010-08-29 13:56:06:458 612 1 b 14 Agent WARNING: customer WU didn't search for the update with the 0x80072f8f error
    2010-08-29 13:56:06:460 6456 1844 COMAPI > COMAPI - RECOVERY -: search [ClientId = Windows Defender]
    2010-08-29 13:56:06:461 6456 1844 COMAPI - updates found = 0
    2010-08-29 13:56:06:461 6456 1844 COMAPI - WARNING: exit code = 0x00000000, result code = 0x80072F8F
    2010-08-29 13:56:06:461 6456 1844 COMAPI-
    2010-08-29 13:56:06:461 6456 1844 COMAPI - END--COMAPI: search [ClientId = Windows Defender]
    2010-08-29 13:56:06:461 6456 1844 COMAPI-
    2010-08-29 538 6456 COMAPI WARNING 13:56:06:462: operation failed because the previous error, hr = 80072F8F
    2010-08-29 538 6456 COMAPI FATALE 13:56:06:462: impossible search asynchronous complete. (hr = 80072F8F)
    2010-08-29 13:56:11:457 612 1 b 14 report REPORT EVENT: {0D7D20A0-F8BA-42FE-8751-D46B0278E5A3} 13:56:06:457 2010-08-29 - 0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0 80072f8f Windows Defender failure software to sync Windows Update Client did not detect with error 0x80072f8f.
    2010-08-29 13:56:11:463 612 1 b 14 report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
    2010-08-29 13:56:11:463 612 1 b 14 WER sent report: 7.4.7600.226 0x80072f8f 00000000-0000-0000-0000-000000000000 Scan 101 unmanaged
    2010-08-29 13:56:11:464 612 1 b 14 CWERReporter finish event management report. (00000000)

    All is well in Mudville tonight, almost! For more information, I'll go through what I did to solve this problem. Looks like it was a corruption in NOD32 and Windows Update Ugent (caused by NOD32?). Side, it's what I've been through and the result. Everything has been run as an administrator or high.

    (1) started a clean boot.

    (2) Ran Fixit 50202 in aggressive. Restarted (still in clean boot) and I tried to WU.

    (3) no joy with the same code 0x80072F8F error.

    4) ran sf/scannow with now errors/problems found.

    4) returned to msconfig to reset the computer to start as usual. When I open the Services tab, I noticed that the NOD32 service was still running. I tried to disable the service, apply/ok/restart. Returned to msconfig after reboot, and NOD32 Service worked again.

    (5) I have PC went to Services to disable NOD32. Whenever I hit okay, I got access denied error msg (Yes as administrator) or high. Nothing I could do would be to disable NOD32.

    (6) I entered the installation of NOD32 and unchecked the options analysis, and then closed.

    (7) I then went back in Services and was then able to successfully disabled NOD32.

    (8) I went to msconfig and check the boot, and everything was fine.

    (9) Ran Fixit 50202 aggressive again.

    (10) given that I thought that the NOD32 was never really disabled when it should have been, I have re-ran WindowsUpdateAgent30 - X 64 I had tried earlier (via another Article, related to the 0x80072F8F error). Still in clean boot.

    (11) for good measure, I have re-run Fixit 50309 (via another article, related to the 0x80072F8F error). Still in clean boot.

    (12) attempt WU and wa - la, he ran and ran and ran (25KO of to be exact). I have intsalled all necessary updates, restarted and again the object of updates. Everything was still good.

    Went 13) return to msconfig and reset the computer to start as usual. NOTE: At this point, the two Services listed for NOD32 are and remain, people with reduced mobility.

    (14) restarted the computer as usual, double checked everything and everything is always good (as far as I can tell)!

    (15) next will be to troubleshoot before NOD32 I completely uninstall and reinstall. Don't know why the Service of NOD32 1 will not disable and don't really care. I guess that everything what happened past that it prevented the repair and reinstallation of WU.

    I hope this makes sense and helps or same questions. I am happy to decypher my ramblings, or answer your questions. I'm just glad I didn't have to go to the next step of upgrade on-site or relocation! Thanks again for the help.    JRD

  • Error code 80072f8f

    Hey guys, on my lower right, where the thing 'solve pc problems' is... I have 2 questions is - windows couldnot check for updates automaticalle. -and then the second is - undeclared verification of the solutions to the problems. -When I click on windows couldnot automatically check updates, it gives me the error code 80072f8f. need help... im confused that nothing works lol. thanx

    Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    ~~~~~~~~~~~~~~~~~~~~~~~~~

    0x80072F8F error code when you try to search the updates available on the Windows Update and Microsoft Update sites
    http://support.Microsoft.com/kb/929458

    Windows Update error 80072f8f
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

    How to reset the Windows Update components?
    [Ignore the section to APPLY to, if a Win7 user;] Run the difficulty in default and aggressive mode]
    http://support.Microsoft.com/kb/971058

    NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I am trying to update Windows and I get the 0x080072F8F error code

    I'm trying to update Windows and I get the 0x80072F8F error code.  I tried to set the time, but that did not help.  I unchecked the revocation of the certificate and that did not help.  I can't go beyond a step at the entrance to .dll.  The one on the list has worked but when I tried as wintrust.dll he asks me what program to use to open this and others.  I even downloaded and bought RegCurePro, but which is not made and will ask for my money back because he did what he was supposed to.  Can I PLEASE get help on this?

    How many copies of Windows that you downloaded?

    First of all, I would like to inform you that only one copy of Windows can be installed and activated on a single computer.

    Follow the steps below to solve the problem;


    Method 1: Verify that your Internet connection is working

    This method is rated: moderately easy.

    To run this method, follow these steps:

    (a) click Start and then click Help and Support.
    (b) in the search help box or in the search online help box, type troubleshoot network and Internet connection problems, and then click Search Help.
    (c) in the list of topics, click on solve the network and Internet connection problems.
    (d) click the link that best describes the problem you are experiencing.
    (e) follow the suggestions to solve the problem you are experiencing.
    (f) when you are done, follow the steps in method B to reactivate Windows 7.

    If this method does not work for you, go to method 2.


    Method 2: Activate Windows 7 using the automated telephone system

    This method is rated: easy.

    To run this method, follow these steps:

    (a) click Start, and then click computer.
    (b) click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation section.
    (c) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (d) click on show me other ways to activate.
    (e) click on use the automated telephone and then follow the instructions that are provided.


    Method 3:

    Reset your TCP/IP stack

    (a) click Start

    (b) type in the box search command

    (c) right click command and select run as administrator

    Enter these one at a time (or copy and paste) and press ENTER after each

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int Reinitialis

    netsh int ip reset

    netsh winsock reset

  • code 0x80072f8f

    I have windows vista Home premium on my laptop and I can not create a restore point also windows update does not work and windows Defender will not update. Windows restore point appears as a group policy problem, but I am logged in as administrator, also windows vista and defender will not update and troubleshooting said they were also the same problem, then the 0x80072f8f error code rode as a common mistake, I checked the date and time are ok and I tried the suggestions at support.microsoft.com/kb/929458 but so far without success. problem of thought may have been the difference in the change of daylight saving time between the East and West of the Australia sides, but nothing helped. Norton 360 shows no signs of the virus on analyses and it updates ok. any suggestions on how to take back control and start receiving updates and works again restore points.

    Thank you

    Chris

    christpv920

    You can try disabling you Norton 360 and start your computer in Mode safe. Try to download the update manually.

    .       Click Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the Load Startup items check box.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

    5. click on OK.

    6. When you are prompted, click restart.

    7 log on to your account.

    ---------------------------------------------------

    TRY TO DOWNLOAD THE MAUNUALLY UPDATES
    ---------------------------------------------------

    To restore your Normal startup:

    1. click on Start, type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue.)

    2. on the general tab, click Normal startup.

    3. When you are prompted, click restart.

    ---------------------------------------------------
    Please let us know

    Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.

  • code 0x80072f8f when I tried to activate win 7 ultimate

    code 0x80072f8f when I tried to activate win 7 ultimate

    Hi Claudiuburloiu,

    Error: 0x80072f8f occurs usually when your computer time differs from the time zone that you belong.

    I suggest to follow the steps below and we update on the State of the question.


    Method 1: Verify and adjust the date and time settings.
    To do this, follow these steps.

    1. Click Start, and then run.
    2. In the Open box, type Timedate.cpl, and then click on OK.
    3. Under the tab Date and time, make sure that the date and time of the computer are correct. If the settings are incorrect, adjust to the correct date and time.
    4. Click OK to close the Date and time properties dialog box.
    5. Try to activate your operating system and check.

    If the method above does not work, proceed to the next method.

    Method 2: Refer to the F, G method from the following link and check if this solves the problem.

    Error message when you try to activate Windows 7 or Windows Vista: "an error has occurred."

    http://support.Microsoft.com/kb/931276

    If you have additional questions, or if this problem persists, come in and we will be happy to help you.

  • error code - 50

    I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

    Error code - 50 on iPhone

  • I keep getting an error code (-1) cannot restore iphone message what can I do?

    My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

    Try to restore 2 times more. If get the same error message

    take the iPhone at the Apple store nearest for a free evaluation.

    Once the diagnosis is complete, staff will explain your options.

    -1 is the hardware failure error code. Assuming that no damage to the

    your iPhone is not jailbroken, you may qualify for a reduction

    the price of the replacement warranty.

    Make a Genius Bar reservation to avoid delays.

    http://www.Apple.com/retail/Geniusbar/

  • What is the error Code (-18)

    iPhone 6 sec more

    iOS 10.0.1

    Get an error code (-18) what this code means?

    Some parts of the phone have been replaced lately?

    What's your iTunes updated to the latest version?

  • I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

    The operation cannot be performed because one or more required items be found.

    (Error code - 43)

    I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

    I'm using an iMac with OS X El Capitan 10.11.6 operating system

    Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

  • Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

    AHT error code.

    You have problems? Why do you run Apple hardware *?

    Of

    http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

    which would indicate a bad sensor on one of your memory modules or riser:

    In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

    Then check the second letter from the list below to see which component it refers to:

    A: ambient air sensor
    B: battery
    C: Central processors (CPU)
    D: DC (direct current)
    e: PCI-express slot
    F: FireWire port
    G: graphics processor (GPU)
    H: drive
    h: heat pipe (heat sink)
    L: liquid crystal display
    M: memory or the memory riser cards

    I would first install a monitoring app like Mac Fan Control of temperature

    http://www.CrystalIDEA.com/Macs-fan-control

    to see of you can find a bad sensor by reading the memory riser card.

    You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

    Since this is the Mac Pro desktop forum

  • 4SNS/1/40000000 error code: VDOR - 18.678 &amp; 18.679

    MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

    No RAM - 4SNS is a sensor error.

  • Transcend Jet 360 Lite SD care &amp; "the operation cannot be completed because an unexpected error occurred (error code - 50)"

    Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

    Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

    All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

    This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

  • Error code: sec_error_ocsp_unauthorized_request

    I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

    An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

       The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
   Please contact the website owners to inform them of this problem.

    You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

    I tried to clear all - cache, cookies, history, blah blah blah

    I am so bored of you people cost me more time.

    It's fine in IE and Chrome.

    If I didn't need Firebug, I would switch to Chrome right now.

    edited because of the language according to the rules-forum-guidelines

    You're right, it is not sensible.

    Never made an exception for the site.

    FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

    Thank you for the help, sorry for the earlier rant.

Maybe you are looking for