Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

Tags: Notebooks

Similar Questions

  • The operation cannot be completed because you do not have the necessary permissions.

    The operation cannot be completed because you do not have the necessary permissions. This is the message I get when I want to create a new folder. I don't have this problem until recently. 1.

    How should I do?

    2 is that there is a security breach?

    I use sierra but, I had the same problem with el Capitan

    When you try to create a new folder? is it an external device? your office? a NAS?

  • Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

    After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

    Aren't these photos on the desktop 'copies' of the originals in the Photo?

    All wise users out there with an answer?

    stop, disconnect all external devices

    Restart your computer in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    empty the trash after checking the files in there are of no use to you

    arrested again

    Reconnect the external devices

    reset.

  • I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

    I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

    Are all the other apps open while you try to do this?

  • I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

    The operation cannot be performed because one or more required items be found.

    (Error code - 43)

    I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

    I'm using an iMac with OS X El Capitan 10.11.6 operating system

    Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

  • {The operation cannot be completed because the item "sauerbraten_2013_01_26_collect_edition_macosx.dmg" is in use.} appears when I try to empty the trash. It clearly refers to a set of type "shooty" I thought I had removed 12 months ago. Any ideas?

    Old-fashioned persists!

    Make sure that it is unloaded from the side bar of the Finder.

  • Moving backups Time Machine - the operation cannot take place because the backup item is not editable

    I want to change the external hard drive that I use for my time machine backups. I went through the steps listed here:

    Time Machine: How to transfer backups from a current backup disk to a new backup drive - Apple Support

    It seems to work correctly. I shot TM back and adding the new drive. TM is now backing up files on the drive up, but there is a problem.

    For some reason, TM has begun to put backups "freely" for lack of better in the external hard drive, and not in the backups.backupdb folder for a week, then returned to save them in the backups.backupdb > ComputerName > files from backups. So in other words, when you click on the hard drive in the finder, it opens the player and you see a folder named Backups.backupdb and then a bunch of mixed in which files are backups time machine named 2016-01-24-XXXXXX, etc.. When you go to the folder Backups.backupdb, there's a more random "loose" time machine backup file 2016-01-23-XXXXXX, and then another folder with the name of computers and in the folder are all TM backups except loose ones I mentioned earlier.

    It seems that TM is working properly now, but I don't know why he put the files from the first days outside the backup folder. However, when I do drag, I get the error:

    The operation cannot be completed because backup items is not editable

    I want to just put all the files in the right folder so that I can A) keep my disk organized and (B) ensure what TM can find everything correctly should I have to go back.

    No idea what is happening and how to fix it?

    Although the documentation Apple says you can copy Time Machine backups in the Finder, it is very slow and sometimes does not.

    This technique works only if the volume that you copy to the same size or larger that that you are copying to.

    First of all, please open the Time Machine preference pane and click the Select Disk... button. You may be able to unlock the settings first, by clicking on the padlock icon in the lower left corner of the window. Log in as administrator.

    Remove the volume you want to copy in the list of backup destinations. Then turn off Time Machine.

    Launch disk utility, open the built-in Help and search for the term 'Double '. Follow the instructions. All existing data on the destination volume will be deleted. That shouldn't be a problem, because you do not want to mix non-sauvegarde and backup data on the same drive anyway.

    If the volume you are copying has been encrypted by Time Machine, you must first unlock it. Click the release button in the toolbar of the disk utility window.

    Turn Time Machine back on and select the new volume as a backup destination. Alternatively, you can continue to use the old volume, if you wish. Both will be alternated when both are available.

    ATTENTION: If you copy the volume is corrupted, as shown by the ERD or first aid in disk utility, while corruption is copied to the new drive. Do not copy data from a damaged on a faulty disk volume. Put aside the reader and do not use until you don't know that you no longer need the data. Then securely erase it and bring it to a recycling center. Do the same if the restore operation fails with "disk errors."

  • The operation cannot be performed because the "Firefox" element is in use.

    Whenever I try to download the latest version of Firefox on my mac, I get the following error:

    "The operation cannot be performed because the"Firefox"element is in use."

    I close Firefox and still get this error. I tried this guy 100 times and may not know how to solve this problem. Help!

    I have Mac OS X 10.6.8 v.

    Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all.html

    If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

    Download a new copy of the Firefox application and save the file to disk on the desktop image

    Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install Firefox.

  • Cannot update 3,010 FF.; Downloaded 3.6: impossible to copy in the app folder "the operation cannot be performed because you don't have sufficient privileges for some of the itemss.

    I had FF 3.0.10 for two years. My preferences are set to automatically check updates, my for a reason, it apparently never worked. I am the administrator for my Mac and have read/write permissions. The manual "check for update" under the menu help is disabled and will not work. " I tried to reset the permissions, quit and restart several times. At a given time, the window ' check for updates ' seems to be enabled, but froze when he started the download and came back to grey again. I tried to download 3.6 on your site, but when I try to drag FF in the app, I get a message that says "the operation cannot be performed because you don't have sufficient privileges for some of the items. Through it all, I noticed that my download folder is gone from the dock on my screen

    Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • Deleting files of Time Machine, "the operation cannot be performed because you have not granted access to some of the elements."

    I am trying to remove approximately two weeks (at a time), but I get "the operation cannot be performed because you have not granted access to some of the elements." How can I get around that?

    Thank you

    My OS is 10.11.3

  • Microsoft Money - when closing down, it saves ok but there is a message saying that the operation cannot be completed. I then use the Task Manager to complete.

    I use Money version 1105, 2004 updated.  I have 2 qusstions-

    1. in closing down, it saves ok but there is a message saying that the operation cannot be completed.  I then use the Task Manager to complete.

    2. is there a version of Money that runs this file?  I tried Sunset but does not recognize my file.

    Any help would be great, thanks in advance

    Eric

    For any question on any version of Microsoft Money, ask http://social.microsoft.com/Forums/en/money/threads.

    Make sure your data and Money backup files are in Documents or another non-protected area, not the default money Program Files or changes and updates will not be saved.

    Unless you are in the USA, the version of Money 2005 (released in 2004) 14.0.120.1105 is the latest available. Sunset silver bed only U.S. data files.

    Installation file to Money 2005 International English QFE2 (not for USA, Canada, UK) from Microsoft, including stand-alone updates 1105, is available at http://www.microsoft.com/download/en/details.aspx?id=26922

    Money 2005 UK - QFE2 (the fixed standalone UK Money 2005 file) can be downloaded from the link to http://www.microsoft.com/download/en/details.aspx?id=26915

  • The operation did not complete because the disk management console view is not updated.

    Disk title management error: Windows 7 original by adding a drive letter
    Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

    "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

    Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

    I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

    Thank you

    Methadras

    Just to follow and finish this, the old MAIN drive has had some problems and was

    continues to worsen, it ends up by crashed.  scannow revealed some Windows system

    Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

    and did a restore of the system since the disks created with the purchase and restored the system to

    "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

    Adding external or internal disks worked without any problem now.

    I created a Windows 7/64 system repair disc.

    I created an Image of the system.

    I have a backup plan.

    I do the scheduled backup.

    I learned a lesson...

    Joe_T45

  • Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I got this message several times, how to fix?

    Try to restore my iPhone and I get the message "Cannot restore iPhone because an unknown error (50)." I can't chat because the phone is locked and I can not access my serial number. I got this message several times, how to fix?

    Have you already checked this discussion about this?

    The iPhone cannot be synced. An unknown error occurred (-50)

  • The action cannot be completed because the file is open in Windows Explorer.

    OK, it seems to be coming a lot but no one was able to respond (including Microsoft) so I'll ask, and be as specific as possible.

    Because I work with vector art that I constantly have to save files by crush the and everything was cool with WinXP pro.  I have Win7 Pro and everything was cool, until recently.  Whenever I tried to overwrite my files, I would get an error message saying that the file was either dead or opened elsewhere, but it has happened about 50% of the time.  A launch the re-registration of files with different names.  After obtaining the files re-registered I then try to remove and rename files, but found I couldn't do it anymore, as I was constantly getting the error message "The action cannot be completed because the file is open in Windows Explorer."  Closing and reopening the browser do nothing.  Someone said if not empty the trash bin works, but not for me.  The files are on an external drive, I tried to disable the cache of writing by Device Manager and Windows Management Console (or other) frozen and took the pc with it (nice work, MS!).  Reboot seems to fix the problem for a bit, but he returned quickly and randomly.  It also seems to randomly select to lock files.  Some files I can not change, some that I can.  Others begin to operate after some time of inactivity.

    I tried to disable thumbnails in Explorer and even added a DWORD NoThumbnailCache in the registry, but it still happens.  Basically, I'll have to save all of the new files over and over again and that from time to time be able to remove the "old" while being only randomly too write others.  This question seems to be infestation Vista and Win7 and people have waited for a fix, Microsoft, but was mum on the issue.  If anyone can come up with a solution, it would be great.  It is killing my productivity!

    Common guys...
    Im having this problem too and I've been thought IE9 is at the origin of the problem, some how, I don't want to disturb...

    Here are some solutions:
    Please note that I'm looking, there is not any solution patch for this program by Microsoft, you can maintain it yourself. And correct solutions in this way losses.

    Solution 1: Use CMD.
    0 - note the following 3 steps will complete the process explorer.exe, so your desktop and windows Explorer all open files and any associated process would stop.
    1. run the Task Manager. (by pressing ctrl + shift + esc or etc)
    2 - go to the processes tab.
    3 - find "explorer.exe" and click on the button "complete the process". If you find several explorer.exe, kill them all.
    4. now, click the menu file-> new task (run...)
    5 type CMD, and then click OK.
    6. now you can do something you couldn't have done before with this user interface. Some useful commands:
    -cd: change the current directory. Use 'CD..' to the 'button' in windows Explorer.
    -dir: lists the existing file and folders in the directory current. Use ' dir/p' to the list in the pages.
    -del [file name]: removes the file [filename] existing in the current directory.
    -Rename [name of file] [new file name]: rename the file [old file name] existing or a file existing in the current directory to [new file name].

    Solution 2: Use a different file manager.
    0 - install and run another Manager file as "XYPlore".
    1 Note that the following 3 steps will end your explorer.exe process, so your desktop and windows Explorer all open records and all other related processes would cease.
    2. run the Task Manager. (by pressing ctrl + shift + esc or etc)
    3 - go to the processes tab.
    4 - find "explorer.exe" and click on the button "complete the process". If you find several explorer.exe, kill them all.
    5. use XYPlore UI and do what you want.
    Please note that the problem could happen with this kind of external explorers too. So close any file and go into a secure after your working directory.

    Solution 3: Do it yourself!
    If you can program, there are some codes that might help you. These codes which talks about Im, says MS Windows to remove your annoying pinned files just before you shut down the system.
    Here is an example:
    MoveFileEx ('C:\windows\system32\ld21E.tmp', nil, MOVEFILE_REPLACE_EXISTING or MOVEFILE_DELAY_UNTIL_REBOOT);
    This code will work correctly in Delphi from Borland compilers, and as you can see, the "ld21e.tmp" file is deleted after compiling this code and restart your windows.

    I wish I can do better, as to publish an Explorer that do what you want automatically, so I hope that these can be useful.
    Some how you can check this thread too, it may be useful:
    http://social.answers.Microsoft.com/forums/en-us/vistafiles/thread/ce44b65d-2430-4865-BC31-fd84d3085d74

  • Problem with rename folders in Windows 7: get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. »

    When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?

    I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus.  It is much more functional than the Microsoft Directory and I have never problem renaming of files.  I am just amazed that so many people have this problem and Microsoft has not fixed.

Maybe you are looking for