error code 0x800b010e high cotext used run microsoft fix it programs

Similar Questions

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Cannot run Microsoft FIXIT error: "an unexpected error has occurred.

  Title: Microsoft Fix it fails

  Hello

  Whenever I try to run Microsoft Fix it, I get an error message saying something like "an unexpected error has occurred.  The fix that it Wizard cannot continue. "I used to see if the Fix, it would help solve the problem of update that take place on this Dell Inspiron laptop running Windows Vista 32-bit Service Pack 1 with Norton 360.  I thought that I had made progress on the issue of the update, but now they are all fail during installation, including Service Pack 2.
  The Dell PC Checkup shows as operating without any problems portable equipment.
  Thanks for any help that can be offered.
  Kind regards
  Roxy111

  Hello

  -What is the FIXIT you have tried to solve this problem?
  -Do you have problems with the installation of the Windows updates?
  -You receive an error message while trying to install updates?
  -You are aware of any changes made on the computer before this problem?
   
  Step 1: I suggest you to see the link below and cehck if the problem persists.
  FIXIT solution Center
  http://fixitcenter.support.Microsoft.com/portal/FindSolutions
   
  Step 2: File system (CFS) Checker

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  (a) click Startand type cmd in the box start the search.

  (b) right click on cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or confirmation, type your password or click on continue

  (c) for the command prompts, the following line and press ENTER:

  sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?

  http://support.Microsoft.com/kb/929833

   
  Step 3: Clean boot

  I suggest to maintain the computer in clean boot mode and check if the problem still persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  For reference:
  Information about Service Pack 2 for Windows Vista and Windows Server 2008
  http://support.Microsoft.com/kb/948465
   
  Hope this information helps.

• What happens if I get an error code when I try to run Dreamweaver or Flash Pro?

  I get an error code when I try to run Dreamweaver or Flash Professional. Any idea? Error code: (0xc000007b)

  Please check if the following solution works:

  Error: "unable to start correctly (0Xc000007b)."

  https://forums.Adobe.com/thread/1099431

  Concerning

  Stéphane

• I get an error code: 81 - another installer is running and must be closed. What should I do?

  "I'm unable to install the update to creative cloud because I get the error code: 81 - another installer is running and must be closed. How can I fix it? Thank you.

  Please follow the solution 2 in the link error: "unable to install". Creative Cloud Desktop , and then reinstall the application.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Cannot run Microsoft Fix It for Program_Install_and_Uninstall error: ' we're sorry, but we encountered an unexpected problem, one or several upload components and can not run...»

  Original title: cannot run Microsoft Fix It to Program_Install_and_Uninstall

  When I run Microsoft Fix It for Program_Install_and_Uninstall, I get "we're sorry, but we encountered an unexpected problem, one or several upload components and cannot run the troubleshooter now...» »

  Hello

  Why you try to run the fix it tool?

  Post to fix any problem with Microsoft tool in Microsoft Fix it Center forums.
  http://social.Microsoft.com/forums/en-us/category/msftsupporttools

• whenever I play blitzs bingo on facebook, I get this error code. What can be done to fix this?

  original title: error code http 500
  whenever I play blitzs bingo on facebook, I get this error code. What can be done to fix this? It happens quite often.

  Hello

  1. This only happens with a particular Web site?
  2. What browser do you use?

  HTTP 500 error: the website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  I suggest you try resetting Internet explorer and check to see if it helps:
  http://support.Microsoft.com/kb/923737

  It will be useful.

• When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  When I run Microsoft Fix it, it says I have no firewall; so I see Security Essentials and everything is GREEN. Why is this?

  * original title - I have Microsoft Security Essentials? *

  Good news is THAT MSE is showing protection is enabled and given that you do not receive notification of Security Center advising the firewall is not enabled it can be assumed that it is enabled. Bad news is that I don't have an answer. You have any other real time protection(Avast, AVG, etc.) currently installed? What, if any, previous protection in real time of programs have been installed and they did include a firewall? You made using tools and methods to remove properly uninstall completely?

  Since it is a problem Microsoft Fix it I suggest you consider posting your question in the fix it Center Forum.

  Microsoft Fix it Center Forum
  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  You can also consider opening a Support box.

  Support-contact us
  http://support.Microsoft.com/contactus#TAB0

  Attach to e-mail
  E-mail address is removed from the privacy *.

  I hope this helps.

• When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  When the updates of windows I get and error code for 643. How can I fix it?

  Here is an answer which is marked as an answer to the error code 643.

  I also participated in that thread, and I gave my suggestions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• Using the Microsoft Fix it Center could I delete just Dell Support Center from my computer

  Dell support center come on my Dell Inspiron 1501. The hardware warranty has expired and dell support load because it support, so using the Microsoft fix Center can remove just my computer dell support center now in the installation of United Nations programs. Just scan Dell support center for problums, but dose not offers not anywhere what fixs unless you have to pay a cost of $$$ for dell fix any problum.

  You should be able to remove the Dell Support Center of control panel software, add or remove programs.

  -steve

• Error code 0 x 80073601: cannot run or uninstall Microsoft security essentials or install new version

  cannot run or uninstall Microsoft security essentials or install new version

  Original title: what is error code ox80073601

  Hi DavidValentine,

  Check that you have removed all other anti-malware real-time products that were already installed on your PC, including free products / trial that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malware bytes (paid), etc.).

  Note: If you use more than one antivirus or antispyware program at the same time, your PC may know a decrease in performance, become unstable, or restart unexpectedly. Before you install Microsoft Security Essentials, or if you want to solve problems with Microsoft Security Essentials, including the update of issues, you must first completely remove your PC Internet security programs.

  You may have to uninstall/reinstall MSE. You should be able to remove MSE of the Control Panel. Uninstall problems see:http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Recommend that you restart the computer to ensure that the uninstall is complete. You can download a new Installation of MSE file fromhttp://windows.microsoft.com/en-US/windows/security-essentials-download

  Response with more information to help you.

• How to tackle with error code 80004002 when I use Windows Update?

  A message tells me that Windows Update was unable to update my computer.  I go to Windows Update and I get the error code mentioned in my question.  This code is not listed in the possible remedies.

  Hello

  Method 1:

  Run the Microsoft fixit from the link below.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  
  Method 2:

  Follow the steps from the link below.

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  http://support.Microsoft.com/kb/956708

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• error code 646 for the updates of Microsoft office

  error code 646 for Microsoft office updates KB949710, KB951550, KB973593, KB950130, KB951944, KB973704, KB974561. Help, please

  Try this for your error Code 646 and read ALL the messages/solutions to your problem on the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/f3390e74-9961-4AAE-8a05-554c1a9cf1a2

  Read the info on the above link to error Code 646.

  With the compliments of: David_O - Support Engineer

  This problem occurs when the agent Windows Update Wups2.dll file is incorrectly registered in the registry. Because registry files that correspond to the Wups2.dll file are missing, update facilities have failed. There are two methods to resolve this issue, use method 1 first, and if it did not resolve your issue, go to method 2

  Method 1: Save the Windows Update files

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under.

  2. in the list record under , click all files.

  3. in the file name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password or click continue.

  6. try to install the updates again.

  Method 2: Download and install Windows Update agent

  For more information about how to download and install the latest Windows Update agent, click on the number below to view the article in the Microsoft Knowledge Base:

  949104

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not help:

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Get the error code 0 x 80070490 while running the troubleshooter.

  Original title: troubleshooting 0 x 80070490

  Hi I have a problem for everything, but it starts to get boring... so my problem is all the time I pretend not to use any utility (network, sound, equipment, etc...) it gave me this error "a problem troubleshooting start." so I click on details and show me this;

  Identifier of the package: unknown

  Path: C:\Windows\Diagnostics\system\networking

  Error code: 0 x 80070490

  Source: engine

  Context: restricted

  and my internet is always weird, because the DNS, but that's another problem..., but when I run the network troubleshooter utility sometimes stay ok!, but I can't because of this unfortunate error...-. -.

  If someone could help me it will help a lot and I already go to gpedit.msc and an analysis of file as in the other post and nothing... Here is my log CBS.log link https://onedrive.live.com/redir?resid=13D454FE3DF2E0D9! 155 & authkey =! APa3EZUmI9r0hDQ & ithint = the file % 2clog

  I appreciate your attention. :)

  Hello

  Please keep us updated on the question and sorry for the late reply.

  If the problem still persists, and you are able to start the computer, I suggest you to update the drivers by following the steps in the following Microsoft article and check if it helps.

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows/update-drivers-recommended-links#update-drivers-recommended-links=Windows-7

   

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-in/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  If the problem persists, I suggest you to update the drivers from the manufacturer's website. If you can't find these drivers please provide us brand and model of your computer and we will try our best to find the latest drivers available on the web.

  Keep us updated on the State of your computer and we will be happy to help you.

  Kind regards

• Impossible to install W8.1, impossible to install the KB2862973 update with error code 80073712, cannot connect to the microsoft account

  I have 64-bit Windows 8 and all these problems started when I tried to install the 8.1 update.  Whenever I try to go to the store to update to 8.1 I get the error message saying "we were unable to connect to the store. This could have happened due to a server problem or network connection has expired.  Please wait a few minutes and try again. "So I looked at this topic and you have tried all the tips of help from Microsoft, convenience stores, store transparent cache, etc. etc. etc. etc.. I can not connect to the store at all. Now I can't change users to a Microsoft account because it tells me that when I try that "we could not connect to the Microsoft services right now.  If this problem persists, look for 'referee' on the start screen. "I also performed this task without success.  Then I have a Windows update KB2862973 that fails to install and gives the error code 80073712.  I looked for solutions to this problem, and those who have tried unsuccessfully.  I really need someone to tell me how to fix all these issues, because I believe they should be linked.  It is a desktop pc Dell that is connected to the internet without any problem and is only about 1 year. I am tech savy, but need HELP!

  Thank you

  Shane

  Thanks for the detailed response. This problem may be caused because corrupted Windows Update components.

  I suggest you to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  If the problem persists, then I suggest also that you can run the DISM commands using the following link: http://support.microsoft.com/kb/947821

  Keep us informed.