error code! 0xc01a001d! 37528/99505 (\registry\machine\componets\perivedData)

Similar Questions

• Vista - Error Code: 0XC01A001D (after the installation of SP1)

  question of 0xc01a001d after downloading vista sp1... If I don't have the windows vista startup disk so what do I do?

  Hi jala123,

  1 how long's he been to the error screen?

  Method 1

  Check if you are able to boot in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If you are able to boot into safe mode then try System Restore to uninstall Windows vista sp1 and start in normal mode.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

   

  Once you're in normal mode and then download and install the system tool, and then install Windows vista service pack 1.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I try to download and install Windows Vista Service Pack 1 I get the following error code: 0xc01a001d

  I can't download service pack 1, please help!

  Every time I try I get the
  !!  0xc01a001d! error, then I have to do a system restore. Once I do that I'm trying to download service pack 1 again, the same thing happens. I don't know what to do.

  Hello

  See if this helps you:

  "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues"

  http://support.Microsoft.com/kb/947366

  If it does not, you should repost in Forum Windows Update for your problem:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Cannot access the name \\computer 0 error code x 80070035 using 2 machines Win 7 Professional x 64

  Makes me crazy!

  State of the computer 1: Norton 360 on. Wired Ethernet for Linksys router. This Computer Configuration initially homegroup. User name and password on both machines. 2 computer can see this machine as expected - sweet!

  State of the computer 2: uninstalled Norton 360. Windows Firewall is off. Wired Ethernet for Linksys router. User name and password on both machines. This computer cannot be seen by computer 1 grrrrr!

  I left home group on both machines several times without success. Several reboots. Convenience stores are worthless. I tried a lot of things posted on this forum and others. My Win 7 machines see my XP machines without problem. All computers in the same workgroup. I can ping computer 2 1 computer and vice versa.

  Earlier this week, it's the opposite problem. 2 computer could not see Computer1. Even old 'advanced sharing' has failed. After 3 days of forums and try things, I reinstalled Win 7 on both computers and everything was fine. Very painful and I am reluctant to reinstall all my software until this problem is fixed permanently.

  Does anyone have a short solution to reinstall Win 7?

  Any ideas why it continues to be? I set up a wireless network first network printer, and then wired, then to the USB. I uninstalled all the software of printer, but that did not help.

  Hi Jack_W,

  Since you are able to see and access computer 2 1 computer and unable to see the computer from computer 1 2. I suggest you first with the computer to check if network discovery is enabled on the computer.

  To turn on network discovery

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  2. click on the chevron to expand the current network profile.

  3. If network discovery is off, under the Discovery Network, click turn on network discovery, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, you can access the link and follow the steps and check if it helps to see the computer 2.
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  You can also check if you can access computer computer 2 1 by opening with the command run and typing in the IP address of computer 2.

  To do this, follow the steps in the computer 1.

  1. Click Start
  2. In the start menu search box type computer 2 \\ipaddress\ and press on enter for example: \\192.168.0.2\

  Check if it opens and connects to the computer 2 in the network.

  Also, you can try to start the computer in safe mode with network and see if they can see each other.  To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "0xc01a001d (\Registry\Machine\COMPONENTS\DerivedData...). Error while installing Vista SP1, WITH RESTORATION or BACKUP ACCESS FORBIDDEN! ANY CHANCE OF HEALING?

  I rebooted several times Vista since Vista SP1 download.  I tried to get my system prepared for a Boot (as several vital Programs are not yet supported) double Win7.  I keep getting stuck on the "0xc01a001d? / 99216 (\Registry\Machine\COMPONENTS\DerivedData... "error.

  I have saved on an external USB hard disk and do not have the original system disks.

  I downloaded the Vista recovery disk.  On all options, he said that I could not restore.  He could not read the USB key to find the backup point.  He would not even install when I tried to reinstall.

  Y at - it a help to me.  I am a student and can get another copy of Vista from MSDNAA but would go instead by the download time intensive task, to find drivers on the Dell Web site (I have an Inspiron 1501) and reloading everything.

  ALL BOARDS

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Vista.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code: C000009A (problems applied update registry during the installation of Windows 7 Service Pack 1)

  After installation of Windows 7 Service Pack 1, the system restarts, and before windows comes up the registry is updated.  I get an error C000009A 128115 of 387921 enforcement update (/ registry)... error that prevents the system to reboot.  Is it possible to get the system to reboot and complete the installation of the service pack.  The only way that I was able to work around this error is to restore from the system restore point before the service pack, but I want to apply the SP1 if possible.  ????

  Windows update and SP1 gave me the same problem and I used this hole day to RESOLVE.

  Windows 7 is not bootable. Safe mode Windows 7 was not bootable, - stop at classpnp.sys.  I used the line of command of the rescue disk and Linux (!) to fix it.  And then little important reading / advice on this forum.

  Error message at startup:

  C000009A application update 262832 (registry\ma 109544 operation error   (no more room on screen)

  After a few reboots failed, I tried a restore of windows rescue disk, but windows update has somehow erased all my restore point! (Argh)

  Then I looked in the log file c:\windows\winsxs\poqexec.log and found a reference to the error: (obs this folder has some 70,000 + files)

  1cbd36fd5eb05f3: 74, c000009a, 1abe7, 0, SetKeyValue; \Registry\Machine\Software\Microsoft\Windows\CurrentVersion\SideBySide\Winners\amd64_microsoft-windows-e atibility.resources_31bf3856ad364e35_pt - pt_0b9032dad0ee6ed8\6.1, 6.1.7600.16385, AQ =.

  Then I tried to add this key in the registry using regedit command line after booting from the rescue floppy.  But repeated boots showed this register does not have / save my extra key. (Strange-I should be able to change the shape of the hot spare register, or?)

  Next step was to start a live CD of Linux (Mandriva) to browse the windows system drive.

  This way, I found the c:\windows\winsxs\pending.xml (99 MB) file and may open in kwrite (Linux).  I'm looking for "atibility.resources_31bf3856ad364e35_pt - pt. Found only in the 114.808 (of more than 300,000 lines) line.  Add a! After< to="" make="" this="" xml="" line="" a="" comment.=""  saved="" the="" file.="" rebooted="" and="" ..="" yes="" ..,="" windows="" 7="" updated="" some="" files,="" rebooted="" 2="" times="" and="" then="" started="" as="">

  I guess MS has created a lot of angry people today!

  Amd64_microsoft-windows-e... atibility.resources_... file is probably related to

  (a) ATI/AMD graphics (as in my system) cards

  (b) Windows MUI (Multilingual User Interface) system in windows 7 ultimate.

  PT - pt is a code for a language.  (Not mine, I'm from Norway, no.)

  on Windows 7 ultimate (new)

• !! 0xc01a001d! 37423/101025 (\registry\machine\components\deriveddat..)

  Hello
  We receive the following error at startup of ideas?

  !! 0xc01a001d! 37423/101025 (\registry\machine\components\deriveddat..)

  Can not start in mode without fail & cant also roll at a time where there was no question, we rather would not have to take the PC of someone to look so any ides reasonable workaround would be accepted with gratitude

  Thank you
  Ben

  Hi Ben,

  Remember to make changes before this problem?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  
  Method 2: follow the steps mentioned in the article below, and then run the Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

  How to use Startup Repair?

  
  Method 3: you can see the steps outlined in the article below, which deals with a similar question

  Your computer may freeze or restart to a black screen that has a "0xc0000034" error message after you install Service Pack 1 on Windows 7 or Windows 2008 R2

  http://support.Microsoft.com/kb/975484

  (Article applies to Windows 7, similar measures valid for Windows Vista)

• Time machine is unable to perform a backup. Not able to access the sparsebundle. Problem occurred first on snow leopard OS. Followed Dragon upgrade to El Capitan. Only difference has error code of 109 changed to null. What about someone?

  Time machine is unable to perform a backup. Not able to access the sparsebundle. First of all, there is problem with the Snow Leopard operating system. Dragon followed in the upgrade to El Capitan. Only difference was error code 109 changed to 'null '. What about someone?

  We need some info.

  You can access from the finder Time Capsule? If this isn't the case, then Time Machine will not work.

  You upgrade the computer snow to El Capo and keep the same name?

  If you want to backup, it is best to start again... clean the new backup any attempt to add a previous backup failed.

  I recommend that you actually erase the TC... do a complete factory reset and start again.

  The previous backup if necessary can be archived on a USB drive connected to the TC assuming that Airport utility can still access it. Airport utility accesses the TC?

  With update installs all sorts of things can go wrong... so tell me more if you can not get anywhere.

• Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code

  The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.

  Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.

  Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.

  The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.

  I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.

  Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.

  Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?

  [Edited by: admin on 26 June 05 20:19]

  Hello

  Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.

  Good bye

• Satellite Pro A120: Corrupt registry - error code 19 Device Manager

  I have a Satellite of A.120 Pro I am trying to charge my Creative Zen Sleek MP3 on it but keep getting a Code 19 registry is corrupted message in the Device Manager. How can I fix it

  Hello

  After a short investigation in the Microsoft Knowledge base, I found this description of the error Code 19:

  ---------------------------------

  Code 19:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged.
  To resolve this problem, you can first try running a Troubleshooting Wizard.
  If this does not work, you must uninstall and reinstall the hardware device.

  This can occur when more than one service is defined for a device, if there is a failure opening the service subkey, or if the driver name cannot be obtained from the service subkey. Try these options:

  On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard. Click on uninstall and click Scan for hardware changes to load a usable driver. Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

  --------------------------------------------

  I hope this steps will help you!

• !! 0xc01a001d! 18216/52483(\Registry\machine\schema\wcm://microsoft...)

  I downloaded the latest SP and only start to

  
  !! 0xc01a001d! 19440/73074(\Registry\machine\schema\wcm://microsoft...)

  Sony vaio did not come with startup disks, tried f8 then start from the last know well, get the same result

  When you start, you will see the Vaio Logo.

  Once you see the Logo, press F10 and you will have two options.

  One is to create recovery discs.

  Other options allow you to reboot back to factory settings, but wiping anything on your hard drive.

  Use the link I gave to see what other options Sony Vaio.

  Good luck with it.

  See you soon.

  Mick Murphy - Microsoft partner

• I get the error code 646 when trying to install 2 very important updates. Also pdf files and others are missing from the registry.

  RPDF files missing.never post private information such as numbers of mail or telephone!

  Ideas: pdf files are missing and error 646

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  during the installation of updates and some extensions files cannot be opened.  Also when you do e-mail or any continuous strike moving cursor then have to keep changing the typing.  Error 646 present during updates.

  Hey Jaynie Tatt

  Read and follow the information in the microsoft link below to fix your error code 646 using their fix - it or using the registry edit

  http://support.Microsoft.com/kb/2258121

  Walter, the time zone traveller

• On my XP machine, I am unable to download the updates. Error code 0 x 80246008.

  To update last Tuesday, I was unable to download the updates.  I went through the FAQ and decided to make a FIX for Microsoft Update.  Later when I tried downloads I got the error code 0 x 80246008 and later by Windows Defender error 0 x 80240022 has been received.  After several other attempts to repair as suggested in the bandages.  I discovered that the BITS service is missing or corrupted.  Now, after having tried several fixes I'm afraid I did the worst problem.  Y at - it all action correction that I can take to get a BITS download and own resettlement?  Apparently, the Windows Update service is intact and is set for automatic activation at startup, but without the partners of BITS service, nothing can be downloaded.  I would like suggestions.  I realize the support ends for XP in April 2014, but still would like to be as secure as possible.  Thank you.

  I think it's missing or damaged settings that causes this error code because of the following command which usually gets rid of this code

  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  and it can be a failure of the qmgr.dll and qmgrprxy.dll to register initially which then translates the inability of the BITS Installer to run.  On the first page of Veeshush talks about this, but you say that you have already saved the files. I don't really know what is suspended the installation procedure of BITS for you when there would have worked for others and that a procedure of Microsoft originates. Of course, some of the files needed to complete are corrupt.

  Doug and I had discussed is who actually remove existing entries from registry BITS

  as was suggested by another poster ElderL could solve the unknown problems that a single registry merger would not correct.  This would replace the registry values of BITS that are suspect with a set of values, who knows him well.

  Running the Microsoft Fix it tools might again be worth.

  Here are a couple of threads where the installation of BITS is discussed

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-update-doesn

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/under-Windows-XP-automatic-updates-service-Svchost/ddedeb05-3b48-4F27-9222-cb43e7ad3776?page=1

• Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

  I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

  You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

  You start with a chkdsk/r from the XP Recovery Console.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Error code: 0 x 57 while trying to install Office updates and error: 1402: Setup cannot Cholakov registry key

  Original title: failure of the updates to download and installation failed request due to registry

  Running XP PROFESSIONAL - two questions...

  • Automatic download of updates of window failed.

  Error code: 0x57A on

  1. Update of security for Microsoft Office Excel 2003 (KB2541025)
  2. Update for Microsoft Office 2003 (KB2539581)

  Error code: 0 x 80070652.

  1. Update of security for Microsoft Office 2003 (KB2509503)
  2. Update of security for Microsoft Office Excel 2003 (KB2541025)
  So I tried looking for a solution and came across a blog that said I should turn off my antivirus and try again.  Did not work.  The blog suggested that MS Office to uninstall and reinstall. So I did.  Uninstalled MS Professional and then tried to re - install...
  • message received Error - 1402

  The installation program cannot Cholakov registry key

  HKEY_LOCAL_MACHINE\SoftWare\Microsoft\CurrentVersion\Run\OptionalComponents\MSFS

  Can someone say if these two things are related or how to fix it.  I was stupid and didn't return to the top.

  Hi jbb59,
   
  -Can install you any other updates without any problems?
  -You receive this mCode error while trying to install Office updates only?
   
  Error 80070652 means that a previous installation is not completed successfully. Restart the computer usually solves this problem.
   
  Try the methods listed in the articles given below to resolve this issue:
   
  How to troubleshoot incidents to update your installation of Office on the Office Update Web site
   
  You receive an error message when you install an Office program or you open an Office program or a document