Error code: 1068

Similar Questions

• Windows XP print spooler 1068 error code

  I have an error code 1068 print spooler.
  The fault has happened today 28/04/2012
  I've been using a Canon MP240 printer for 4 years.
  The print spooler is set to automatic.
  I followed the instructions and I have following error messages
  The dependency Service or group was able to start.
  This message appears in LexBceS & Fax
  I am using Microsoft Windows XP,
  Home Edition,
  Version 2002
  Service Pack 3

  As I wrote when you posted this question identical at the end of the outdated threads.

  I don't really know what "instructions" may be followed.  There are a lot of 'instructions' in the old thread.

  It is also important to give the full text of the error messages, rather than paraphrase as you did.

  All I know is that you have a Canon MP240 printer which does not work because the print spooler is not running.  And the reason for which the print spooler is not running is probably because you were at the same time a Lexmark printer (or a badge printer Lexmark Dell) and this printer has been poorly uninstalled.

  I don't know if your printer Canon already worked and if he did, what happened just before it stopped working.

  You might have noted that I asked several questions of the person who initially asked to return in November.  You have answered them yourself to save time.

  Please provide the full error message.

  Do you now or have you ever had a Lexmark or Dell-badged Lexmark printer installed?

  What happened just before the printer who stops working?

  And what version of Windows is installed, including service pack? [You said it; Thank you.]

  Also, I don't know if you have a fax modem that you want to use Windows XP fax services.  I ask this because when you paraphrased the error message you received, you mentioned 'Fax '.

  Normally, the fax service depends on the service print spooler, rather than the reverse.  If the print spooler service does not start, then the fax service also fails to start, so I expect that you might have seen two distinct error messages. .... But I'm just guessing.

  To save time - and with the caveat that this is based on guessing the answers that you have not yet provided - what follows will likely restore your printing capacity.  You WILL need to do the "special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer" before you start step A.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Epson all in one scanner not working not not no saved restore point WIA 1068 error code

  Windows 7 error message 1068 WIA no before system restore point

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that the scanner does not work.

  There may be a hardware conflict.

  Try the methods.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if that helps.

  Check out the link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest you perform a Scan SFC and check if it helps.

  Check the following link below.
  https://support.Microsoft.com/en-us/KB/929833

  Note: Although SFC analysis I recommend that you ensure that there are no applications or programs running on the background.

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows Update 8024402f - lots of work error code

  Windows Vista Edition Home Premium

  Service Pack2

  32 bit

  The Trend Micro Internet Security antivirus 2012; other programs installed I do not know

  Buy laptop with Vista on ii

  Windows that open the update page:

  Final check of updates: never

  Updates have been installed: never

  Installation updates page:

  KB953595 07/11/2009

  Adobe Reader X (10.1.1) 27/09/2011

  Microsoft Silverlight 4.0.60831.0 24/01/2012

  Review page your update history - all updates of definition for Defender could not leave on 19/03/2011 (definition 1.99.1460.0) until today 18/02/2012 (definition 1.119.2141.0).  No other updates for all programs are listed.

  I already have

  1. tried and waited several minutes before running update several times.  Shut the computer down and restarted all day long.
  2. Downloaded difficulty It Center and run the update patch.  There were a few difficulties but set does not completely the problem.  Note: during the installation of Fix It, I received the following message: "MATSWiz.exe---C:\Windows\system32\dssenh.dll bad Image is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media o contact your system administrator or support software provider. »
  3. Follow-up KB836941 - manually disabled my disabled Trend Micro Security, accelerators software on IE. turned on the Defender.
  4. Updated defender and necessary - then received the error.  I had to manually download the update of the Defender due to errors.  Obtained working Defender.  Don't recall the KB, I followed this.
  5. Then downloaded Windows Update Agent - the program fix did not work.  Checked to host files and proxy servers - no.
  6. Difficulty he asked responded and he couldn't have sent me this forum. Learned to read WindowsUpdateLog.

  Here is the log report AFTER that I installed the update agent and update of Defender "."  Any help you can give would be great!

  2012-02-18 14:27:15:075 3760 12f0 package Setup installation of CBS

  'c:\ae250e4e010dfe2f1378178f062ce6\WUClient-SelfUpdate-Aux-TopLevel.cab '.
  2012-02-18 14:27:41:580 3760 12f0 Setup install the installation package

  'c:\ae250e4e010dfe2f1378178f062ce6\WUClient-SelfUpdate-Aux-TopLevel.cab' succeeded
  2012-02-18 14:27:42:562 1068 1440 Misc = logging initialized (build):

  7.4.7600.226, tz:-0600) =.
  2012-02-18 14:27:42:562 1068 1440 Misc = process: C:\Windows\system32\svchost.exe
  2012-02-18 14:27:42:562 1068 1440 Misc = Module: c:\windows\system32\wuaueng.dll
  2012-02-18 14:27:42:562 1068 1440 Service *.
  2012-02-18 14:27:42:562 1068 1440 Service * START * Service: Service startup
  2012-02-18 14:27:42:562 1068 1440 Service *.
  2012-02-18 14:27:42:578 1068 1440 Agent * WU version 7.4.7600.226 customer
  2012-02-18 14:27:42:578 1068 1440 Agent * Base Directory: C:\Windows\SoftwareDistribution
  2012-02-18 14:27:42:578 1068 1440 Agent * access type: no proxy
  2012-02-18 14:27:42:578 1068 1440 Agent * network state: connected
  2012-02-18 14:27:59:925 3760 1768 wusetup configuration is complete.  Exit code is 0. Reset is NOT

  necessary
  2012-02-18 14:28:36:632 1068 1440 report CWERReporter::Init succeeded
  2012-02-18 14:28:36:632 1068 1440 Agent * Agent: initialization of Windows Update

  Agent *.
  2012-02-18 14:28:36:632 1068 1440 Agent * Agent: initialization of the global settings

  cache *.
  2012-02-18 14:28:36:632 1068 1440 Agent * WSUS server:
  2012-02-18 14:28:36:632 1068 1440 Agent * state WSUS server:
  2012-02-18 14:28:36:632 1068 1440 Agent * target group: (Unassigned Computers)
  2012-02-18 14:28:36:632 1068 1440 Agent * Windows Update access disabled: No.
  2012-02-18 14:28:36:648 1068 1440 DnldMgr Download manager restoring 0 downloads
  2012-02-18 14:28:37:677 1068 1440 to THE # to THE: initialization of automatic updates

  ###########
  2012-02-18 14:28:37:677 1068 1440 to # approval type: on demand (user preference)
  2012-02-18 14:28:37:677 1068 1440 to THE # scheduled install date and time: daily at 10:00
  Minor updates of 2012-02-18 14:28:37:677 1068 1440 to THE # auto-install: Yes (by the user

  preferably)
  2012-02-18 14:28:37:677 at the request of 1068 1440 to THE setting at the time of installation to 2012-02-19

  16:00
  2012-02-18 14:28:37:677 1068 1440 AU initialization featured updates
  2012-02-18 14:28:37:677 1068 1440 to THE Found set 0 cached updates featured
  Setting of to THE to THE 2012-02-18 14:28:37:677 1068 1440 pending client directive to "impossible to"

  Detect"
  2012-02-18 14:28:37:677 1068 1440 only to THE delayed finish to initialize
  2012-02-18 14:28:38:956 1068 1440 report * report: initialization of static reports

  data *.
  2012-02-18 14:28:38:956 1068 1440 report * OS Version = 6.0.6002.2.0.66304
  2012-02-18 14:28:38:956 1068 1440 report * OS Product Type = 0 x 00000003
  2012-02-18 14:28:39:003 1068 1440 report * computer brand = Hewlett-Packard
  2012-02-18 14:28:39:003 1068 1440 report * computer model = Compaq Presario CQ50 Notebook

  PC
  2012-02-18 14:28:39:003 1068 1440 report * Bios revision = F.24
  2012-02-18 14:28:39:003 1068 1440 report * name of Bios = PhoenixBIOS 4.0 Release 6.1
  2012-02-18 14:28:39:003 1068 1440 report * the Bios Release Date = 2008-09 - 03 T 00: 00:00
  2012-02-18 14:28:39:003 1068 1440 report * locale 1033 = ID
  2012-02-18 14:28:44:042 1068 e94 report CWERReporter finish event management. (00000000)
  2012-02-18 14:28:52:794 1068 1440 launched THE new to THE customer for the directive "impossible to"

  Detect ", session id = 0x1
  2012-02-18 14:32:39:493 1068 10 b 0 detection of THE shutter to THE via API DetectNow
  2012-02-18 14:32:39:493 1068 10 b 0 to trigger detection online (interactive)
  2012-02-18 14:32:39:493 1068 1440 AU #.
  2012-02-18 14:32:39:493 1068 1440 AU # START # to THE: research updates
  2012-02-18 14:32:39:493 1068 1440 AU #.
  AU 14:32:39:508 1068 1440 2012-02-18<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">

  {7FB7F7C2-7DE9-467F-B9C7-E14B0E76F6B1}]
  2012-02-18 14:32:39:508 1068 e94 Agent *.
  2012-02-18 14:32:39:508 1068 e94 Agent * START * Agent: find the updates [CallerId =

  AutomaticUpdates]
  2012-02-18 14:32:39:508 1068 e94 Agent *.
  2012-02-18 14:32:39:508 1068 e94 Agent * Online = Yes; Ignore download priority = No
  2012-02-18 14:32:39:508 1068 e94 Agent * criteria = "IsInstalled = 0 and.

  DeploymentAction = 'Installation' or IsPresent = 1 and DeploymentAction = 'Uninstall' or IsInstalled = 1 and

  DeploymentAction = 'Installation' and RebootRequired = 1 or IsInstalled = 0 and DeploymentAction = "uninstall."

  and RebootRequired = 1 "
  2012-02-18 14:32:39:508 1068 e94 Agent * ServiceID = {7971F918-A847-4430 - 9279-}

  Service of third 4A52D1EFE18D}
  2012-02-18 14:32:39:508 1068 e94 Agent * Search Scope = {Machine}
  2012-02-18 14:32:39:508 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:524 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:664 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:664 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:680 1068 e94 Agent searching for auth cab for 7971f918 service updates-

  A847-4430-9279-4a52d1efe18d to http://download.windowsupdate.com/v9/microsoftupdate/redir/muauth.cab
  2012-02-18 14:32:39:680 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2012-02-18 14:32:39:696 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:742 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\AuthCabs\authcab.cab:
  2012-02-18 14:32:39:758 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:758 1068 e94 Setup looking for agent SelfUpdate
  2012-02-18 14:32:39:758 1068 e94 configuration version Client: Core: 7.4.7600.226 to the:

  7.4.7600.226
  2012-02-18 14:32:39:758 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:774 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:820 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
  2012-02-18 14:32:39:820 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:39:836 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2012-02-18 14:32:39:852 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:054 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
  2012-02-18 14:32:40:070 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:070 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2012-02-18 14:32:40:086 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:132 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
  2012-02-18 14:32:40:148 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:40:179 1068 e94 Setup determine whether a new installation program manager should be

  Downloaded
  2012-02-18 14:32:40:179 1068 Setup Manager SelfUpdate e94 is found.  It will be

  Downloaded
  2012-02-18 14:32:40:179 1068 e94 Setup assessment applicability of installing package 'WUClient '.

  -SelfUpdate-ActiveX ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "
  2012-02-18 14:32:40:304 1068 e94 configuration package 'WUClient - SelfUpdate-

  ActiveX ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "is already installed.
  2012-02-18 14:32:40:304 1068 e94 Setup assessment applicability of installing package 'WUClient '.

  -SelfUpdate - to the TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "
  2012-02-18 14:32:43:096 1068 e94 configuration package ' WUClient-SelfUpdate - to the-

  TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "is already installed.
  2012-02-18 14:32:43:112 1068 e94 Setup assessment applicability of installing package 'WUClient '.

  -SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "
  2012-02-18 14:32:46:154 1068 e94 configuration package 'WUClient-SelfUpdate - Core-

  TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 "is already installed.
  2012-02-18 14:32:46:170 1068 e94 SelfUpdate installation verification completed.  SelfUpdate is NOT

  Mandatory.
  2012-02-18 14:32:48:510 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
  2012-02-18 14:32:48:525 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:48:572 1068 e94 Misc signature validation for

  C:\Windows\SoftwareDistribution\WuRedir\7971F918-A847-4430-9279-4A52D1EFE18D\muv4muredir.cab:
  2012-02-18 14:32:48:588 1068 e94 Misc Microsoft signed: Yes
  2012-02-18 14:32:48:588 1068 e94 PT +++ PT: synchronization of updates of the server

  +++++++++++
  2012-02-18 14:32:48:588 1068 e94 PT + ServiceId = {7971F918-A847-4430 - 9279-}

  4A52D1EFE18D}, server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: SyncUpdates failure, error = 0x8024400D,.

  the SOAP client error = 7, soap = 300, HTTP = 200 status code error code
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: SOAP fault: 0x00012c
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: faultstring:Fault has occurred
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: ErrorCode:ConfigChanged (2)
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: Message: (null)
  2012-02-18 14:32:52:113 1068 e94 PT WARNING:

  "" Method: "http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
  2012-02-18 14:32:52:113 1068 e94 PT WARNING: ID:6c788ff5-7148-4981-abf6-14cb1309e2cf
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: ECP: could not validate the cab file digest

  Downloaded from

  http://download.windowsupdate.com/msdownload/update/software/dflt/2009/05/2731676_2758f42e46605c9915ace2dd77

  0a693fb29dd555.cab

  with error 0x8009001d
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: ECP: this trip contained some

  optimized updates failed. New number of update = 0, old Count = 30
  2012-02-18 14:32:55:701 1068 e94 PT FATALE: ProcessCoreMetadata did not return any update

  to be validated
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: synchronization of updates: 0x8024402f
  2012-02-18 14:32:55:701 1068 e94 PT WARNING: SyncServerUpdatesInternal failed:

  0X8024402F
  2012-02-18 14:32:55:701 1068 e94 Agent * WARNING: could not synchronize, error =.

  0X8024402F
  2012-02-18 14:32:55:795 1068 e94 Agent * WARNING: exit code = 0x8024402F
  2012-02-18 14:32:55:795 1068 e94 Agent *.
  2012-02-18 14:32:55:795 1068 e94 Agent * END * Agent: finding updates [CallerId = of

  AutomaticUpdates]
  2012-02-18 14:32:55:795 1068 e94 Agent *.
  2012-02-18 14:32:55:795 1068 e94 Agent WARNING: customer WU didn't search for the update with

  error 0x8024402f
  2012-02-18 14:32:55:795 1068 1140 AU > # RETURN # to THE: research updates [CallId =

  {7FB7F7C2-7DE9-467F-B9C7-E14B0E76F6B1}]
  2012-02-18 14:32:55:795 1068 1140 # warning: reminder of search failed, result =

  0X8024402F
  2012-02-18 14:32:55:795 1068 1140 # warning: could not find updates with error code

  8024402F
  2012-02-18 14:32:55:795 1068 1140 AU #.
  2012-02-18 14:32:55:795 1068 1140 # end # in THE: research updates [CallId =

  {7FB7F7C2-7DE9-467F-B9C7-E14B0E76F6B1}]
  2012-02-18 14:32:55:795 1068 1140 AU #.
  2012-02-18 14:32:55:795 1068 1140 to THE need to show undetectable notification
  2012-02-18 14:32:55:795 1068 1140 to THE timeout parameter next detection to 2012-02-19

  01:32:55
  2012-02-18 14:32:55:795 at the request of 1068 1140 to THE setting at the time of installation to 2012-02-19

  16:00
  2012-02-18 14:33:00:802 1068 e94 report REPORT EVENT: {2834EEA3-6CB6-49DD-90A1-5617DF87DFEF}

  2012-02-18 14:32:55:795 - 0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0

  8024402f AutomaticUpdates failure software sync Windows Update Client failed

  to detect with error 0x8024402f.
  2012-02-18 14:33:00:818 1068 e94 report CWERReporter::HandleEvents - WER report upload

  completed with status 0 x 8
  2012-02-18 14:33:00:818 1068 e94 WER sent report: 7.4.7600.226 0x8024402f 00000000.

  0000-0000-0000-000000000000 scan unmanaged 101
  2012-02-18 14:33:00:818 1068 e94 report CWERReporter finish event management. (00000000)

  Research on lead dssenh.dll me:
  http://support.Microsoft.com/kb/822798

• error code - 50

  I was trying to update my I-phone with IOS 10.02 6.  While it was updating the phone, I received an error code-50.  the phone is now stuck and I can't seem to exit the mode "update."  What does this error code mean?

  Error code - 50 on iPhone

• I keep getting an error code (-1) cannot restore iphone message what can I do?

  My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?

  Try to restore 2 times more. If get the same error message

  take the iPhone at the Apple store nearest for a free evaluation.

  Once the diagnosis is complete, staff will explain your options.

  -1 is the hardware failure error code. Assuming that no damage to the

  your iPhone is not jailbroken, you may qualify for a reduction

  the price of the replacement warranty.

  Make a Genius Bar reservation to avoid delays.

  http://www.Apple.com/retail/Geniusbar/

• What is the error Code (-18)

  iPhone 6 sec more

  iOS 10.0.1

  Get an error code (-18) what this code means?

  Some parts of the phone have been replaced lately?

  What's your iTunes updated to the latest version?

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• Can someone explain please the 4SNS/1/40000000 error code: TMOP - 127.875 and how to solve the problem?

  AHT error code.

  You have problems? Why do you run Apple hardware *?

  Of

  http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/

  which would indicate a bad sensor on one of your memory modules or riser:

  In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.

  Then check the second letter from the list below to see which component it refers to:

  A: ambient air sensor
  B: battery
  C: Central processors (CPU)
  D: DC (direct current)
  e: PCI-express slot
  F: FireWire port
  G: graphics processor (GPU)
  H: drive
  h: heat pipe (heat sink)
  L: liquid crystal display
  M: memory or the memory riser cards

  I would first install a monitoring app like Mac Fan Control of temperature

  http://www.CrystalIDEA.com/Macs-fan-control

  to see of you can find a bad sensor by reading the memory riser card.

  You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)

  Since this is the Mac Pro desktop forum

• 4SNS/1/40000000 error code: VDOR - 18.678 &amp; 18.679

  MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!

  No RAM - 4SNS is a sensor error.

• Transcend Jet 360 Lite SD care &amp; "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Error code: sec_error_ocsp_unauthorized_request

  I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:

  An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.

  I tried to clear all - cache, cookies, history, blah blah blah

  I am so bored of you people cost me more time.

  It's fine in IE and Chrome.

  If I didn't need Firebug, I would switch to Chrome right now.

  edited because of the language according to the rules-forum-guidelines

  You're right, it is not sensible.

  Never made an exception for the site.

  FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.

  Thank you for the help, sorry for the earlier rant.

• 4005 and 4013 error codes

  Air, 16G iPad. tried to install the latest iOS update. ultimately received 4005 and 4013 error codes. What do these codes mean and how can I fix the problem?

  Try troubleshooting on this page: If you see 9-4005, 4013, 4014 error when you restore your device iOS - Apple Support

• Suddenly MSEssentials 0x800703eb error code is after the recent installation of firefox 4. Any connection possible? no other recent activity or facilities

  MS Security essentials is coming with "your pc could not be analyzed" error code 0x800703eb. This occurs the day after the installation of Firefox 41 with no other facilities important program or activity for some time. We had no other software security for several years, which doesn't seem like a cause as possible. Any ideas or suggestions? Others noticed and reported similar problems?

  Thanks for any help
  Hans

  Hello

  So far, 41 Firefox installation is clean. Because your question is related to Microsoft here certain Threads are related to your problem. At the same time you can contact Microsoft Support

  I hope this helps.

  Thank you!

• Error code: How can I get an item in the Recycle Bin?

  I can't put a webarchive into the trash.  Error message says, "the operation cannot be completed because one or more required elements was not found (error code - 43) how can I get the item in the Recycle Bin?

  reset

  then try again.