Error code 116 "NVLDDMKM STOPPED RESPONDING'

Similar Questions

• WOW/graphics error "display driver nvlddmkm stopped responding and was retrieved successfully."

  Help, please. On the next computer I have terrible crash problems while playing WoW. Critical error WOW States: "not enough memory to process command - 11 538 bytes requested."

  When running 3D Mark Vantage I can reproduce the "display driver nvlddmkm stopped responding and was recovered successfully.

  Processor Intel Core i7 CPU 920 @ 2.67GHz
  Details of the component
  NVIDIA GeForce GTX 295 graphics
  4 095 MB total graphics memory available graphic set
  Main hard drive 53GB free (140 GB Total)
  64 bit version with service PAC 2 Vista Ultamate

  Forums are full of posters indicating that it is a Vista / Nvidea incompatibility problem that has been around for years and that the problem is not treated. I tried everything I can think of, check the RAM to download new drivers, to the removal of unnecessary records of WOW. I reinstalled everything, run each diagnostic tool in the plane, patches downloaded, checked for the virus and still no help.

  I am currently able to play WOW on the smaller graphics settings and avoid cities. With this level of equipment, it's a shame, really, I should be able to do more.

  Did anyone have any suggestions of what I can do at this point?

  OK, I did a lot of research on this issue.  The problem lies in the Blizzard, most of the time.

  World of Warcraft is a set of 32 bits.  Because it is strictly 32 bit, it only has access to 2 gigabytes of memory.  Windows manages the other 2 giga of addressable space.

  Most of the developers of games flag their games before the compile time to use larger amounts of memory.  Blizzard doesn't do this, because their anti-cheat system and third-party tools rely on the 32-bit addressing and address 64-bit would mean that they must all be rewritten.

  What happens in the game, is that your footprint large capacity memory card is mapped in the game.  In general, it is when your settings are high, because it uses the most memory, which explains why the game is playable when you use minimal settings.  Given that the configuration of your particular graphics card uses close to 2 gig of RAM itself, quickly force you the game short of memory addressable space.

  To resolve this problem, you may be able to play with reduced settings.  Reduce your resolution is usually the best way to limit the use of memory, since it increases exponential use RAM when you increase the resolution.  You might have to play with different parameters.  You can open the upward Task Manager and monitor the use of your memory WoW game to see where the sweet spot is maintaining your memory under control.

  Blizzard will have to make the difficult choice to eventually allow access extended memory.  More people are buying equipment like yours, this problem will be more widespread.

• Display driver nvlddmkm stopped responding and has recovered successfully after sleep, and then blue screen

  original title: display driver nvlddmkm stopped responding and has recovered successfully after sleep, then BSOD.

  Well, if not some time ago, we got a Nvidia GeForce 240GT video card. We used an ATI Radion 3460 I think and it worked normally. Then when we got the nVidia card, we started to see the problems. Occasionally, he would show the blue screen of death. I tried to reproduce the error and came to an interesting conclusion. Whenever I put the computer in sleep mode turn off mode 'sleep', I wait a bit and then the login screen appears. I connect and it shows me the "display driver nvlddmkm stopped responding and was recovered successfully. Then after that, if I go on YouTube and try to watch a video, the computer hangs and a BSOD would leap upward. I am angry. I used "standby mode" so and with the new map video, everything got worse. I tested this problem on Windows Vista and 7. And btw, the drivers are up-to-date, I made sure the driver nvlddmkm himself file is up-to-date, and temperatures are perfect.

  update the drivers from NVIDIA. Also make sure that your power supply is powerful enough to handle the new nVIDIA card. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• display driver nvlddmkm stopped responding and has successfully recovered

  So, about a week ago I checked the nVidia website to see if there was no news available drivers for my card (XFX GeForce 9600 GSO) and there was. Installiation was simple then a restart. After reboot, I thought that I would play Call of Duty 4 and after 5-10 minutes of play my screen goes black and it appears with a small warning sign in the region of noticfication "display driver nvlddmkm stopped responding and was recovered successfully."

  The pc will be a blue screen with a nvlddmkm.sys error or it goes off and nothing will work
  forcing me to turn off by the power button. I had never met moyenessentiel before you install the latest drivers.
  After looking for some fix on google, I couldn't find
  something solid. So I opened the Device Manager and clicked on graphics cards
  and redeployed the pilot.
  Still no luck. Most of the games I played this error still appeared. I tried all the drivers on the nVidia site
  that are suitable for my card. The drivers on thecd also included witht that card and they do not seem to work either.
  I installed the drivers with Windows Live OneCare disabled, disabled UAC and nothing running
  in the background, such as recommended by nVidia. Still nothing works. I have the Sims 3, Call of Duty 4,
  Call of duty: World at War, Halo 2 for Vista and HAWX installed. The only one
  game I havn't had the error is H.A.W.X
  I am running Windows Vista Home Premium authentic with all latest updates from Windows Update.
  Any ideas? This leads me through the wall...

  Hello PaulFordge,

  Hello go to the temperature settings in the nivida, here's an image Control Panel.,.

  What is your idle temp? If you can load a game in windowed mode and have the temperature to be measured to see if the window is active, what is the temperature under load?

  Thank you

  jlluitj
  Josh Luitjens - self-taught computer tech.

• Error code 116 for Windows Adobe CC

  Try to install the first Pro CC (2015.3) and after effects CC (2015.3)

  Both have the following error message

  Exit code: 116

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 0 warning (s)

  FATAL: Fatal Error ' 116' occurred in download

  FATAL: An error has occurred in the download package (name: AdobeFontsRecommended_x64-mul Version: 1.0.0.1). Error code: "116"

  Any help would be appreciated

  Hi Ricky251294,

  This discussion forum, which dealt with a similar problem, can help Update Fatal Error 116 "cloud Creative "

  If this does not resolve the problem, please let us know a bit more information, so that we can better solve the problems. What is your computer and operating system? It is 64 bit? Have you installed Premiere Pro and Adobe After Effects successfully in the past? Do you have other installed Adobe software?

• Stop error code blue screen: STOP: 0x000000F5

  I am a student and I take 2 of my classes online.  As soon as I decided to take my classes online my computer starts to work again. I can't afford to take it to the cause of Squad of geek I'm behind in my classes. It happened already, blue screens, and I was about to start my classes then instead of he sends to a diagnosis, I thought I could solve the problem by simply installing a new hard drive. If that's what I did. About a week later, I got another blue screen and since I had just put the new hard drive and a warranty, I got and they fixed, does not really enter in what the problem was. Now about a month has passed and the dreaded blue screen is back. This time that I wrote all the error codes and everything I did to try to solve the problem. I guess only through diagnostic tests, and to install a new hard drive was a mistake, given that I spent $260 and the problem is not resolved. In any case, I'm sorry I got carried away with the details, but I'm desperate! Last night, I had the first blue screen and read it.  The usual "a problem has been detected and windows were shut down to prevent damage to your computer.

  Then he said (and this was the first and only time I've seen this message) "run a system diagnostic utility supplied by your hardware manufacturer. In particular, to achieve a memory check, and check memory faulty or incompatible. Try to change your video card. "And then the usual"disable any hardware or drivers and software, etc... Technical information: STOP: 0x0000007F (0x00000000, 0x00000000, 0x00000000, 0x00000000).  Then, I started it in safe mode w/network, ran windows memory diagnostic tool and it found nothing. Then I tried Microsoft fix google and I change video card. Ending me upgoing in the properties of my video card to find out information about the pilot. Somehow, I ended up on Intel' support and found a newer driver for my video card, so I downloaded it. But then I got the blue screen again. This time it read; "A problem has been detected etc..  FLTMGR_FILE_SYSTEM with Tech Info STOP: 0x000000F5 (0x0000006E, 0x87AD62F8, 0x87AD62C8, 0x00000000). Can you please tell me what is happening so I can solve this problem once and for all! Or should I just invest in a new computer?   Thank you for your time.

  Hello

  Since this has happened material suspect in particular hard drive and anything
  report (such as the motherboard and wiring) - also, malware or same antivirus/anti -.
  spyware/security programs.

  ------------------------------------

  You have ZoneAlarm or any 3rd party firewall installed? If so, this could be the cause.
  Other antivirus/security programs could be at least partially responsible.

  This fix "could" apply however do not use if you are quite safe.

  Two drivers of platform using WFP (Windows Filtering) causes a computer crash when the
  computer running Windows Vista, Windows 7 or Windows Server 2008
  http://support.Microsoft.com/kb/979278

  Check also:

  The General causes of errors "STOP 0x0000007F" (applies to Vista and Windows 7 as well)
  http://support.Microsoft.com/kb/137539

  ===========================================================

  Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  For the methods of troubleshooting blue screen using BlueScreenView and MyEventViewer see my answers
  If this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available the onedrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------

  BCCode: 0x0000007f 7F

  Have you added a hardware or drivers updated recently? Check Control Panel - Windows
  Updates to see if all drivers have been updated it just before what is going on has begun.

  For 7f - this could be a problem of material such as uncomfortable cards or memory, while there are
  other causes. Power electric low could also lead to this. Use the troubleshooters above and below
  and when you get to the drivers and memory sections refer to my next message below and then
  return if necessary troubleshooting services

  If a PC remove ALL power. Opening the case, remove and reinstall all memory cards and ALL
  cable (try not just to close) on both ends if they are accessible and on the device ends if not
  (remove the cables and the resettlement of help them to eliminate minor corrosion).

  If a laptop or a PC, you will need to take a shop (not BestBuy or other BigBox stores) or your
  Support of the machine system.

  ----------------------------------------------------------------------

  BCCode: 7F 0x0000007F which is the same as 0x1000007F

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  This trap might be a bound trap (a trap the kernel is not allowed to capture) or adouble foul(an error occurred during the processing of an earlier fault, which always results in a failure of the system).

  Parameters

  The first parameter that is displayed on the blue screen indicates the number of trap.

  The most common trap codes are the following:

  • 0x00000000 or division by zero error, indicates that a DIV instruction is executed and the divisor is zero. Memory corruption, other hardware problems or software failures can cause this error.
  • 0 x 00000004, or overflow, occurs when the processor executes a call to an interrupt handler when the overflow (OF) is flag set.
  • 0x00000005, or limits check fault, indicates that the processor, then executing a BOUND instruction, determines that the operand exceeds the specified limits. A BOUND instruction ensures that a signed array index is within a certain range.
  • 0 x 00000006 or Opcode not valid, indicates that the processor attempts to execute an invalid instruction. This error occurs generally when the instruction pointer is corrupted and point to the wrong address. The most common cause of this error is hardware memory corruption.
  • 0x00000008 or Double fault, indicates that an exception occurs during a call to the previous exception handler. In general, two exceptions are handled in series. However, there are several exceptions that cannot be handled serially, and in this case, the processor signals a double fault. There are two common causes of a double fault

  CAUSE

  0x7F bug check occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same battery. For example, if two file system filter drivers are associated to the same stack and then again the recursively of file system, the capacity of the battery.

  Solve the problem

  Troubleshooting: If you have recently added the material to the computer, remove to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. Run the diagnostics of material that does not have the system manufacturer supplies to determine which hardware component.

  The scanner memory is particularly important. Faulty or incompatible memory can cause this bug check. For more information on these procedures, see the manual of your computer. Check that all the cards in the computer are well calibrated. Use an ink eraser or electrical contact treatment, available in electronic supply stores, to ensure the adapter card contacts are clean.

  If the error appears on a newly installed system, check the availability of updates for BIOS, SCSI, or card network controller. These updates are generally available on the Web site or the hardware manufacturer BBS.

  Confirm that all hard drives, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If the error occurred after the installation of a new or updated device driver, you should remove or replace the driver. If, in this circumstance, the error occurs during the startup sequence and the system partition is formatted with NTFS, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console in order to access the file.

  Also to restart your computer and press F8 to character-based menu that displays the choice of operating system. In the menuof Advanced Options , select thelast known good Configuration option. This option is most effective when you add a single driver or service at a time.

  Overclocking (setting of the CPU to run at a speed higher than the nominal specification) can cause this error. If you have overclocked to the computer that is experiencing the error, return the CPU to default clock speed setting.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error. You can also disable caching memory BIOS to try to resolve the problem.

  If you have encountered this error during the upgrade to a new version of the Windows operating system, the error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version. If possible, remove all third-party device drivers and system services and disable all antivirus before upgrade you. Contact the software manufacturer for updates of these tools. Also, make sure that you have installed the latest Windows Service Pack.

  Finally, if all of the steps above do not resolve the error, take the system motherboard to a repair for the diagnostic facility. A crack, a scratched trace, or a defective component on the motherboard can also cause this error.

  BCCode: 7F 0x0000007F which is the same as 0x1000007F<-- read="" this="">
  * 1304.html http://www.faultwire.com/solutions-fatal_error/Run-a-System-diagnostic-Utility-supplied-by-your-0x1000007F-

  -----------------------------------------------------------------------------------------------------------------------

  BCCode: F5 0x000000F5

  The most common cause of this problem is a problem of hard disk or hardware connected to the drive
  as the mother/controller card and cabling. Other possible causes include antispyware/antivirus/security programs.

  Bug Check 0xF5: FLTMGR_FILE_SYSTEM

  Bug FLTMGR_FILE_SYSTEM control has a value of 0x000000F5. This indicates that a fatal error has occurred in the Filter Manager.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support.
  To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  FLTMGR_FILE_SYSTEM settings

  The following settings are displayed on the blue screen. Parameter 1 indicates the type of violation. The meaning of the other parameters depends on the value of parameter 1.

  See this link for the parameters or the Faultwire link below.
  http://msdn.Microsoft.com/en-us/library/ff560383 (v = VS. 85) .aspx

  Cause

  The cause of the problem is indicated by the value of parameter 1. See the table in the settings section.

  
  Resolution

  If parameter 1 is 0 x 66, you can debug this problem by checking that your minifilter driver recorded a reminder after the operation for this operation. The current operation are in the structure of recall data. (See parameter 2). Use of the ! fltkd.cbd the debugger extension.

  If parameter 1 is 0 x 67, you must verify that you do not have a leak pool unpaginated somewhere in the system.

  If parameter 1 is equal to 0x6A, make sure that your minifilter driver does not refer to this file object (see parameter 2) to get a handle at any time during the processing of your minifilter of this operation.

  If parameter 1 is equal to 0x6B or 0x6C, then a State internal unrecoverable error has occurred causing the operating system bug control.

  If parameter 1 is equal to 0x6D, make sure that your minifilter driver does not call FltReleaseContext too many times the specific context (see parameter 2).

  If parameter 1 is equal to 0x6E, make sure your minifilter driver does not call FltReferenceContext after the context has been removed (see parameter 2).

  BCCode: F5 0x000000F5<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/FLTMGR-file-system-0x000000F5-* 1242.html

  ============================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Programs install correctly and I keep getting error codes when they stop or will not be installed.

  I can't install programs. I have XP Professional 32-bit.  When I try to update DirectX, I get error messages like "Program has failed the integrity Scan" or he said: he did not like a piece of furniture, or a file in the program has been corrupted. When I try to install Adobe Reader, it stops with error code 13042 and wrote that a program interrupted the installation. I have done 3 installs own to solve these problems, but they continue to flow upward. Validation always works very well. But even some other microsoft programs will not properly download.  How can I fix them?

  Hello

  · What is the number and the model of the computer?

  · What is the service pack installed on the computer?

  Check out the links below and try the same thing no and check if this may help: installation of Flash Player error: "download failed the integrity check (16236.304.443)": http://kb2.adobe.com/cps/512/cpsid_51258.html

  Description and explanation of a CAB file: http://support.microsoft.com/kb/310435

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• Error message: display driver stopped responding and has recovered

  Original title: I get an error message of...

  I get an error message... display driver stopped responding and recovered... then I get also get with her driver Intel Graphics Accelerator Driver for Window display 7 (7) is not responding and successfully recovered. also sometimes the screen just flickers...?

  Thanks for your help!

  Try to download the latest driver for your graphics card.

• Update error Code 646 when stopping and the installation of the Vista updates

  I had problems with these updates... When I hit the closing down and install updates my computer installs the update but will have problems starting windows when I try to start my laptop. If I try to do it through the control panel error code 646 comes up... im on Windows Vista Home Premium, updates are as follows:

  Update of security for Microsoft Office Excel 2007 (KB982308)

  Update of security for Microsoft Office InfoPath 2007 (KB979441),

  Update of security for Microsoft Office PowerPoint 2007 (KB982158),

  Update for Microsoft Office Word 2007 (KB982135) security,

  Update of security for Microsoft Office System 2007 (KB976321),

  Update of security for Microsoft Office System 2007 (KB982312),

  Update of security for Microsoft Office System 2007 (KB982331),

  Update for Microsoft Office OneNote 2007 (KB980729),

  Update for Microsoft Office System 2007 (KB981715)

  Hello

  Here are my recommended steps to resolve this problem:

  1 disable UAC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications.
  6. follow step 3.

• Get the error code 116 blue screen when you play the game portal 2

  Original title: Pc restarts when you play

  When you play games like portal 2, after about 10 minutes, my PC stops all of a sudden down, retarts. I get this error when restarting.

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: 116

  BCP1: 85360510

  BCP2: 8F7FBA5E

  BCP3: C000009A

  BCP4: 00000004

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini052212-01.dmp

  C:\Users\Nathan\AppData\Local\Temp\WER-608185-0.SysData.XML

  C:\Users\Nathan\AppData\Local\Temp\WER4DB2.tmp.version.txt

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Any help? Thanks, Nathan
  Hello

  It's my generic how updates of appropriate driver: (update your video/display driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your
  System. For each driver in the list, additional useful information is displayed: load address
  of the driver, description, version, product name, company that created the driver, and
  more.
  http://www.NirSoft.NET/utils/DriverView.html

  To check system drivers manufacturer as replacements and camera manufacturer who are most
  current. Control Panel - device - Display Adapter Manager - note the brand and
  fill out the template tab of the driver for your card video - double-click - write down the
  the version information. Now click on UPdate Driver (this can do nothing as MS is far behind
  certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver
  stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd
  evening with their own software and drivers and all other main drivers you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), and then
  Site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions.
  (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT
  After each installation.

  Always check in the Device Manager - drivers tab to be sure the version you install
  actually arises. This is because some restore drivers before the most recent is installed
  (particularly that audio drivers) so install a driver - reboot - check is to be sure
  installed and repeat if necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable driver facilities in
  Windows updates, that leaves about Windows updates but it won't install drivers
  who will be generally older and cause problems. If updates offers a new driver can
  HIDE (right click on it) and then go get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

   

• Error: The display driver stopped responding and has recovered

  Sometimes (one times a day at least)
  video driver says:

  "Display driver has stopped working and has been restored! »
  Someone suggests the cause or the problem?
  Thank you

  Hello

  I found an interesting about this error - http://support.microsoft.com/kb/2665946 article
  I do not know what computer you are using, but what you can try is to visit the Toshiba download page and check if the latest driver is installed on your machine.

  To be honest, from time to time the same happen on my machine. I use Win7 64 bit. It happens usually if several applications are open and that one of them is active in the flash player window.

  Can you please tell us which model of laptop you have and which version of Windows is installed?

• Satellite X 200-NVLDDMKM stopped responding BSOD

  Hi all

  Have a stock of X 200 (not overclock or any change at all) but constantly encounter NVLDDMKM BSOD. After a very quick search on Google, you can determine that this is an endemic problem with Vista and NVIDIA cards. I was wondering if someone Toshiba could give advice on how to fix this major flaw that is starting to get very, very boring. It will be same BSOD before completing the startup in windows...

  For now, ja? 196,04 pilots of laptopvideo2go helps me and I know what you say - use the Toshiba drivers leave the site Web - but the problem always rears its head using the drivers of tosh (lying around so far NVIDIA releases, you market it like a laptop for gamers, you should keep up with versions)

  If other people have the same problems please comment on it, we who publish the most attention that power can pay to the problem...

  Thank you very much

  Dan

  HM, I wonder how many people will always show on the problems with the combination-> Vista + Nvidia cards

  I'm sorry, but IMHO Vista is completely unable to push something forward when it comes to games. If I were you I would go down to XP and be happy that an operating system uses only 5% of the resources of the system and not as one with overloaded faecals 'window' which implies an operating system.

  Regarding your problem: Please try memtest and SuperPI or at least something that verifies your RAM/CPU on possible errors.

  But PLEASE please do it without this operating system called vista. Take rather the UBCD4Win to check your memory. The tool that comes as a downloadable image of www.ubcd4win.com is a live XP system with a bunch of tools on the bridge.

  Try it and then decide. Don t think that the side obscure (Vista), be a Jedi. (XP, linux) :)

  Welcome them

• driver nvlddmkm stopped responding and has recovered

  Okay, do I still need to remind you all how bad M$ support sucks? I don't think that's clearly stating the obvious...

  Here's my problem: every once in a while, I get the error message in the title, when reading older or newer games, such as FEAR or Gears of War. My laptop is a GX 700 MSI, 3 GB of RAM, 2.1 Ghz dual core CPU Intel Penryn with 8600 GT Nvidia graphics card. Don't DARE EVEN tell me I should do this and that and I need to search the forum or on the web or go to another M$ SupportCenter... was it made... Here is my list of research on M$ answers:

  http://social.answers.Microsoft.com/search/en-us/?query=nvlddmkm&refinement=113

  I made all this possible described here: more recent nvidia drivers installed, placed my computer laptop in a cooler, conducted tests of RAM to find errors, wrote using MSI (which of course I redirected to software manufacturers) and even went to a dedicated support site Vista... but guess what? M$ is not accepting my activation key for Vista Edition home premium, despite the fact that it came with my laptop and it is 100% authentic... need proof? All updates for Vista are already installed, including the WGA, so there is no problem regarding this key... BUT M$ SUPPORT SITE SAYS THAT'S NOT GOOD! and so I can't continue in my futile quest for an answer to this old recurring problem, which gives not less than 11,300 links in Google... So bad, I didn't have the download option of the screenshot with the errors, I guess that it would have been the only laughable portion of this terrible experience...

  I want all you know that there is nothing wrong with my laptop. (Oh wait, I might have made a mistake: he now has Vista installed...) It worked perfectly while XP has been installed, but the disaster called Vista ruined my life... I am a Linux engineer, so I'm certainly not a noob when it comes to troubleshooting my PC. I wonder how much frustration someone knowing the slightest IT must have when trying to get help from M$, having to click through all the links that don't lead no where and when they do not lead somewhere, it's a dead end or "opinion" useless...

  So after spitting my guts with hate, here is my application: what is the email address, I can use to DIRECTLY send M$ details on the problem? This forum is absolutely no help and has been so for some time now (messages on this case has gone on for 2007...), so I lost all faith in humanity and I ask something USEFUL...... is a simple e-mail address - this too much to ask?

  Hi Dilibau,

  In many cases, users solved the same type of question by install the old driver, uninstall the existing version and using the generic driver as well as update the driver through Windows updates.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  I'm sorry to know that you are facing this problem. We invite you to give your comments by visiting this link feedback for Vista: https://feedback.windowsvista.microsoft.com/default.aspx?productkey=winvista
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Unable to start - bluescreen error Code 116

  original title: I have windows vista and have a problem with blue screen windows won't open

  Blue screen problem event name

  OPERATING SYSTEM. Version: 6.0.6002.2.0768.3
  Locale ID: 2057
  Additional information on the problem

  Collection 116 BC

  BCP1 868AE00

  8CC11720 BCP2

  O Version S 6-0-6002

  Service Pack 2-0

  768-1 product

  Hello

  I would recommend that you start with a boot minimum troubleshooting since you can get into safe mode:http://support.microsoft.com/kb/331796/en-us

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org