Error code 1402 updates of Windows

Similar Questions

• Error code 80004002 update of Windows Vista.

  When I try to update Windows, I get the message "Windows could not search for new updates" and meet an error code 80004002. I try to get help but find no reference to this error, only error 8024401 b.

  Hmmm... I would recommend so then boot from the Vista DVD and execution of the restoration of the system from the recovery environment. See here for more information on how to get there. If this does not work, I think that a clean install is required. See the section "Performing a new installation" of this KB for more details on this. William Keener | Blog
  You are looking for an "easy button?"
  Join our Facebook group

• error code 0x80070426. update of Windows, microsoft security; Windows Defender

  All my Windows products is no longer up-to-date.  I deleted Microsoft OneCare (a wonderful program that will sorely missed me) and installed Microsoft Security.  Next thing I know nothing updates.  In addition, Windows application now that I'm is no longer connected to the Internet even though I am.

  Any suggestions?

  I did run the OneCare cleanup tool before MSE unless it was launched during the uninstall process.

  Most of the other users who replaced OneCare with MSE discovered (the hard way) that they needed run the cleanup tool before installing MSE. There are many discussions on this subject in the MSE start-up and upgrade forum.

  You are welcome and thank you for your comments, Brian. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code security update for Windows Vista (KB971486) _ 80070570

  Please help im a little new and don't understand

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  --
  ~ Robear Dyer (PA Bear)
  MS MVP - IE, mail, security, Windows Client - since 2002

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible?

  Error Code 0 x 080070570 Windows updates and 0x800A01AE impossible? Regds, 'a journey of a thousand miles begins with a first step."

  Code 0x800A01AE error and 0 x 080070570

  Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands and press ENTER after each command:

  net stop wuauserv
  net stop bits
  output
  Rename the Catroot2 folder.

  Note do not follow this step if you are using Microsoft Windows 2000.

  To rename the Catroot2 folder, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands and press ENTER after each command:

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
  output
  Important do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  Rename the folder "C:\Windows\SoftwareDistribution":
  Click Start, click Run, type %any, and then click OK.
  Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
  Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 wups2.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 wuweb.dll

  Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
  Click Start, run, type cmd, and then click OK.
  At the command prompt, type the following commands and press ENTER after each command:
  net start bits
  net start wuauserv
  net start Eventlog
  output

  Luck!

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Windows cannot check for the error code 80070424 updates.

  I have windows vista premium x 64
  Windows Update stopped working and when I they do it manually it says windows cannot check for the error code 80070424 updates.
  I searched everywhere for an answer... Please help

  ----

• Error codes when you use windows update 0 x 643

  Error codes when you use windows update

  Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

  Hey Joe,

  You can check if this article helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

• I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.

  I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error.  Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem.  What should I do?

  Hi Nita,

  Thanks for posting your question in the Microsoft Community forums.

  The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.

  I suggest you try the procedure described in the article and see if it helps.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
  http://support.Microsoft.com/kb/956706

  Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• Updates KB2533523 and KB2468871 cannot install and I got the error code 643 on my windows vista computer.

  Help! How can I get those blasted things to install?

  Hello

  Follow the step and check if that helps.

  Method 1: you receive error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install .NET Framework updates when you use Windows Update or Microsoft Updates

  http://support.Microsoft.com/kb/976982

  Method 2:When, that you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive a Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

  Method 3: you receive error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

  Method 4:Try download and install the update

  http://www.Microsoft.com/download/en/default.aspx

• Error Code 800f0902 - cannot install Windows Update

  original title: 800f0902 error Code

  I have Windows Vista and since a few days I had the error message above after trying to do Windows Update (dt000).  Before I found this site, I see that this error Code was presented several times before but is not not very skillful with technical data, I did not understand the answers. Please can you help me to solve this problem, as it may seem, that they will not go away!  A big thank you to you.  Irene Atkin

  Hello

  Perform the following troubleshooting steps to resolve this problem:

  Method: 1

  Configure the computer to clean boot.

  View the following command to configure the computer to boot:

  How to perform a clean boot

  Note: After checking in the clean boot, follow step: 7 article to reset the computer in normal mode.

  Method: 2

  Also I suggest you try to reset the Windows Update components and check if that helps resolve the issue.

  See the following article to reset the Windows Update components.

  How to reset the Windows Update components?

  Version update failed to install.

  See the following link to find which update failed to install.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• How can I solve error 0x8024402C on update of Windows 7?

  * Original title: update windows

  How can I solve error 0x8024402C on update of Windows 7?

  See if anything here helps - http://windows.microsoft.com/en-us/windows/windows-update-error-8024402c#1TC=windows-7

  The error code is also mentioned in this article - https://support.microsoft.com/en-gb/kb/2509997 which has steps which peuvent help.

• Network Windows 7 error code: 0 x 80070035 Windows no access\\__

  Let me first of all that I had these two networked computers successfully during the past two weeks, but they won't stay in network.  This machine is running Windows 7 (64-bit), and the other computer is running Windows XP Professional Service Pack 3, 32-bit.  Both computers are configured to share all their readers to C.  The XP machine has a player of D that is also configured to share.  In the last two weeks, I copied the files back and forth between two machines on all players.  Computers always appear under network for each machine folders.  Both computers are set up on the network with a task force of the HOUSE name.  I've run the troubleshooter network on the Windows 7 machine and it detects any problems.  Windows 7 computer is named NEWCOMPUTER. The Windows XP computer is called OLDCOMPUTER.  I also stopped firewalls and software of anti-virus protection on both machines.  Network discovery is enabled for the Windows 7 computer.  File and printer sharing is enabled. File sharing connections are set to encryption 40 or 56-bit.  Password sharing turned OFF.  Windows is allowed to manage the homegroup connections.  Using the services.msc command, set the startup type of properties browser on automatic, automatic server properties, the SSDP DEiscovery on automatic and assistance TCP/IP NetBIOS on automatic.
  

  When I originally set up the Windows 7 machine, I tried to share all the C drive with the Windows XP machine, but Windows XP would give an error message that says "access denied you may not have permission...". "I went into the Windows 7 machine and had to set sharing and permissions control total for all tastes of each folder in the C drive.  Then the machine other than system files Windows XP has been able to open, read and edit all the files on the Windows 7 machine.  Now, when I click on the Windows 7 machine OLDCOMPUTER, I get the error message "error Code: 0 x 80070035 Windows cannot access\\OLDCOMPUTER.»  When I click on the Windows XP machine NEWCOMPUTER, I get the following error:

  "An error occurred in plugging Y:to\\Newcomputer\C: Microsoft Windows network: the network path was not found." The connection has not been restored. »
  

  A GUEST account is also installed on the XP machine.  I'm running a Netgear RP614v4 4 wired router that is connected through cable port Ethernet to a modem of broad band satellite.  There is also a printer connected to the same router.  Two computers can print to the printer via this router.  Two computers can access the Internet.  They just cannot access each other.
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  I do this solution I encounter the above error (0 x 080070035);

  It occure between xp & 7 sometimes

  for example, in the start menu type in secpol.msc

  go this way-> local policies-> Security-> network security options: Lan Manager...

  -> Choose the second choice-> Send LM & NTLM-use NTLMv2 session security if negotiated

  OK maybe

• Windows cannot check for the error code 80070490 updates.

  I received this error since November 2008.  Updated Windows wil not automaticlly.  I can not go on the site and update, I get the same error message "windows can not find the new updates" what can I do?  Any suggestions on how to solve this problem.  I see all kinds of problems to update, but I have not yet found a solution to my problem.  I have windows vista Home premium, windows\system 32, X 86-based pc.  Don't know what all this means, but it's what he says that I have.  Help!

  Hi Boodyswife,

  Please see the following Microsoft KB article:

  KB 958044: You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates

   

  We can't wait to hear back from you with your results.

  Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.