Error Code 39 on CD-DVD TSST LS - L632D drive

Similar Questions

• Update Vista causing an error code 10 on my dvd player

  After one of my systems reformatting, I get an error code 10 on my dvd player. Everything works fine until the updates for Vista (Vista Home Basic) are installed, then the drive is dead. I replaced the drive, but got the same thing. I tried to uninstall the device and update the driver in Device Manager and I get an error telling me that the unit was not installed correctly.

  Any suggestions...?

  Thank you

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Error code 0 x 80070002 wher backup external hard drive 80 GB

  Error code 0 x 80070002 wher backup external hard drive 80 GB

  Hi jcarbonn,

  This problem is caused by one or more profiles under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList missing ProfileImagePath.

  We recommend you try the steps listed for the error code 0 x 80070002 in this article.

  You can also try the steps mentioned in this article for the exact scenario on the computer.
  See the code 0 x 80070002 error when saving files (Valid also for Vista)

  Very important: modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
  See how to backup the registry

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 39 for CD/DVD drive

  Original title: no CD/DVD drive

  I can't play any CD or DVD tried uninstall/reinstall, but get error code 39 ideas? Thank you

  Hi johnhealey,
   
  Run the fix it tool of the article given below and check if this can help fix the problem.
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Update Windows Vista error code A 8024, 000 after replacing the HARD drive

  Hello

  I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

  After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

  I tried the solution provided in this thread, but did not work for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

  I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

  Any help is appreciated.

  Thank you.

  Eugen

  Hello

  1. which utility Microsoft Fixit did you tried to load?
  2. what happened when you tried to load the Microsoft Fixit utility?
  3. what was the error message when you try to update the installer?
  
   
  Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
   
  Method 3:
  
  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
  http://support.Microsoft.com/kb/946414
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
  Download Windows Vista Service pack from here:
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Reference:
  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Get the error code: 0 X 81000037 while safeguarding my hard drive Windows 7.

  Original title: Error code: 0 X 81000037

  I've never had a success to the top of my hard drive in Windows 7 and after 3 years, I think it's time to figure out why. I get error code 0 X 81000037.

  Windows backup failed trying to read from the shadow copy on one of the volumes to back up. Please check logs in case any relevant errors.

  When I entered the code on the MS site he gave me instructions on how to locate my junctions from the command prompt:

  DIR /S OF RANDOM

  Then he gives me instructions on how to remove a mounted volume reparse point, but there are 2 things wrong with that.

  1. they do not tell you how to determine what junction to remove and

  2. they don't tell you how to get to the window 'Properties of sample Volume mounted' that you're supposed to do in.

  Here is the URL see for yourself. https://support.Microsoft.com/en-us/KB/973455#bookmark-workaroundissue12

  The event log said: "If the volume of the source or the destination is on a disk (of course, it is on a disk would it be what on?). My C: drive I save is internal my drive and my drive G: I am saving is a 500 GB external WD.) Run CHKDSK/R, and try the operation again. »

  Anyway I'll run CHKDSK/R on both drives and, hopefully, by then someone will post a reply as to where I can find this mystery mounted Volume sample fenΩtre "PropriΘtΘs" who speak the incomplete evidence and perhaps a clue as to which junction I'm supposed to delete.

  Yes - if you happen to have a drive WD their software is quite reliable and usable, and it's free.

  For those who aren't, here's what seems to be a good alternative:

  If you want a truly refreshing experience of backup image at least consider the free version of Macrium Reflect:

  http://www.Macrium.com/reflectfree.aspx

  Think about what you are going to do one day if your hard drive failures or your system does not start, and you must rely on the backup/restore of Microsoft program and help you could get these committed Microsoft alleged 'experts' (not the same as volunteers in the community who are the real experts).

  Then imagine the process of recovering your files or your entire system using software and tools to a company that specializes in backup/restore or using the tools provided by Microsoft.  Which company do you think knows more about how things like backup/restore and system recovery should work?

  Imagine the support you would get from a company that specializes in the backup/restore software and that's all they do all day long.  You've seen the kind of support you get from Microsoft?  Without success, didn't work, etc.

  Of course, you will get more features in the wages of Macrium version, but even the free version is superior to everything that Microsoft has to offer (backup/restore is not their business).

  Install and test the free version.  If you don't like it, uninstall it.

  Vroom!

• Error code 10 updating the Microsoft teredo tunneling adapter driver via Device Manager

  Hi, I have a hp pavillion dv6 with windows 7 64-bit edition. I saw the yellow exclamation point in Device Manager and when I try to update this driver by let me pick up the driver (it says error code 10) or research online (updated driver already installed). What should I do to remove this yellow question mark in Device Manager? Thank you.

  Original title: teredo tunneling adapter microsoft

  Hello Hamdullah,

  Please keep us updated on the status of the issue.

  Please refer to the suggestions of Mohammed Raieed said on January 16, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter/27162f78-d3b2-4A80-8166-b5596ca9fa11

  I hope this information helps.

  Thank you

• Re installed windows xp home edition and lost device multimedia audio control driver. error code 10__and tailor want to get info for driver FinderTM.

  I checked the support site of intel and audio driver installed, but he showed his controller did not recognize computer.

  Does anyone have tip for this problem?

  I saw on ad for FinderTM driver but I wonder whether you try or not.

  Hello!
  I just make the sound back on my computer.
  I installed the drive the multimedia audio controller from Intel support. (In my case).
  http://www.Intel.com/p/en_US/support?IID=HDR+support

  After unpacking the file winzip says 33 files unzipped successfully.
  See left of the windows of the link showed
  C:\DOCUME~1\Owner\LOCALS~1\Temp. ()

  then open Device Manager and clicked error sign of the audio controller
  Click re install driver
  Assistant update material request looking for software then select No, not this time and click NEXT.
  Choose the installation location specific and FOLLOWING
  Select include this location in the search.
  stuck at this address I have open the file. -C:\DOCUME~1\Owner\LOCALS~1\Temp. () and NEXT.

  After that, my audio driver is installed correctly. (Working!)

  Thanks for all replies!

• How can I fix an error code 10 with my dvd/cd rom drive?

  Hello

  I have vista a window and my dvd rom drive has an error 10 code on it. He has demonstrated since the end of August and I'm not sure how to get rid or correct the problem. I was wondering if I did system restore to the day before where the error showed that would work? Although I don't know how to that date on the restoration of the system, I thought I'd ask. I have a hp pavilion dv9000 and I tried to delete the upperfilter thing and even used Microsoft solve this quiet a few times and nothing has worked, and since I downloaded Service Pack 2 a week ago he would keep trying to disappear and reappear in my device manager. So if there is anyway you can help please let me know!

  Thank you

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite A300 - error code 39 on CD/DVD drive

  Does not recognize my Satellite A-300 PSAJ4E DVD - RW and CD-ROM drive. He says cannot load the drivers for the device, it may damaged or lost (code 39). I didn't download the drivers of Toshiba support center.

  The exact name of the appliance: * PIONEER DVD - RW DVRKD08A ATA DEVICE *.

  What should I do? Thank you

  Hello!

  Research on Microsoft Knowledge Base takes only a few minutes and I founded this article:
  http://support.Microsoft.com/kb/314060

  Then, follow the Microsoft solution to remove upper and lower filters. After that, the player should work again.

  Good bye

• Device Manager show that this driver may be corrupted or missing (error code: 39) on CD/DVD devices

  Device Manager has a yellow ball with an asterisk on the CD & DVD devices.  My computer does not display a device.  The Device Manager has a message that the driver may be corrupted or missing (Code 39).  It happened after uninstalling Norton and McAfee installation.  I uninstalled McAfee and tried to install the drivers.  I uninstalled and reinstalled the device.  Still no CD or DVD displayed in my count.  Everybody recognizes the problem?

  Original title: CD & DVD devices do not work

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Error Code: 1316 C:\windows installer\ProsetDx.msi attempt driver update.

  I'm trying to upgrade a processor intel driver the Intel "Driver Update Utility" network connection, it should be easy, but I get this error message. I run Vista Home Premium on a Dell inspiron. How can I solve this problem?

  http://support.Dell.com/support/downloads/index.aspx?s=DHS&CS=19

  You get your drivers, etc FRO Dell at the above address.

  If you have problems with it, please contact Dell;

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&CS=19&l=en&s=DHS

  See you soon.

  Mick Murphy - Microsoft partner

• I get an error code 10. DT High Definition Audio CODEC driver problem. Have uninstalled and re installed, still no progress. Any advice? I have

  I bought a new laptop, Dell Vostro 3550 and found pirated software. I installed Windows 7 Pro (64 bit).

  There is no sound at all. Get a code 10 message, IDT High Definition Audio CODEC has a driver problem. I uninstalled and re installed the driver without result.
  If anyone can help?

  Hello Eugene,

  When you installed Windows 7 Pro, did you do a reformat and clean install, or have you just loaded Win 7? Part of the problem may be a residual of pirated software. I recommend a reformat and clean install if you can do it now.

  In the contrary case, the thing to look at is if there is a driver conflict between what driver is there now compared to what was there. Go to control panel | Device Manager and watch the video, sound, and game controllers section. What drivers are here for audio? And which audio driver your speakers are pointed to? The active audio driver suitable for your speakers.

  If you could answer my questions, I might be able to help you further.

  Kind regards

  BearPup

• error code. hd521-2w

  Hard drive - Samsung sp2504c windows xp error code hd521-2w

  The drive failed the SMART short test and returned this error. The error code "hd521-2s" means generally that your hard drive has failed or is about to fail. Please make sure that you have a set of HP recovery disk for your computer and replace the disk hard as soon as possible.

• error code 0x80040707__dll function call crashed

  XP pro no diskes doesn't want to #3 everything downloads for this problem

  Hello Dhance,

  Thank you for your message.  Do you by chance have an installed Brother printer?  In my research, it appears that this error code is constantly connected to a Brother printer driver.  A fix recommended starting the service of spooling print so that the driver could be installed.  Please let us know if you do or have a brother printer that could cause this problem or if this answer helped you solve this problem.
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.