error code 66 has during updates

Similar Questions

• Error code: 0x8007F0F4 received during updates made and now cannot open it is to say or do something with it

  Obviously the download of updates was done while I was away on vacation. Now, looking back, I can't open, run or do something with it.

  Cleo,

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/958051 >

  UTC/GMT is 16:34 Tuesday, July 31, 2012

• error code 66 has the installation of the updates

  for the last week or 2, my laptop has tried to apply an update whenever I stopped him.

  and when I try to update via windows update, it fails and says windows update encountered an unknown error (code 66A)

  the update which is a failure: a security update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x 64 systems (KB2160841)

  It is a way to solve this problem?

  See the answer to a previous post, involving the KB:

  See Diana / of Andre.Ziegler or respond to a post above about the error code:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3>

• error code 525 appeared during the installation of windows update

  error code 525 appeared during the installation of windows update.

  I m using windows vista 32 bit

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Error code 646 appeared during a windows update session

  Original title: error code 646

  error code 646 appeared during a windows update session. Any ideas what this is and how to fix it?
  Worcesterwoody

  Try this Fixit http://support.microsoft.com/kb/2258121

• Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

  I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

  Hello

  You are able to install some other updates?

  I suggest you follow these methods and check.

  Method 1: Run the fixit.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/   

  Method 2: Run the clean boot and install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

  If the method above does not work, proceed to the next method.

  Method 4: Rename the Software Distribution folder.

  Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

  1. Open an administrative command prompt window.
  2. Run the following commands and press ENTER after each command:
  3. 1. Net stop wuauserv
     2. CD %SystemRoot%\System32
     3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     4. Net start wuauserv
  4. Try to install updates again.

  Important: When you use this method, the following problems occur:

  ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·         When you remove the Software Distribution folder, your download history is deleted.

  ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  I hope this helps!

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• Error code: 8024200d (cannot install updates)

  Error code: 8024200d (cannot install updates)

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  Option 1 - Download updates manually and install the same (you can find the same via number KB) -http://www.microsoft.com/downloads/en/default.aspx

  or you can simply try.

  Option 2 - How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  FYI - read - http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Vista - Error Code: 646 (cannot install updates of work)

  Microsoft Works important updates. error 646?

  Here is an article with a fix for updates, get the error code 646 (mainly Office updates):http://support.microsoft.com/kb/2258121.

  If this does not work, try the Windows Update Agent to:http://support.microsoft.com/kb/949104/.

  If that still does not help, please repost your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads , where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code 80070032 trying to update windows Vista

  Error code 80070032 trying to update windows Vista Hi I forgot I'm doing an update of windows & cant I disc clean up as well as other tasks that can do?
  can you help me please? Thank you please hurry my e-mail address below
  E-mail address is removed from the privacy *.

  ERROR_NOT_SUPPORTED 80070032
  Failed to create the directory or file

  Is this a sudden, new problem or a course?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update error code 0x8024a000 when installing updates.

  • WindowsUpdate_8024a000

  • 0x8024a000

  Here are the error codes I received during an attempt check updates.  Initially, I received several requests for updates and the difficulty experienced in the installation successfully updates without receiving the error codes.  Successfully, I stopped the BITs and the Windows Update and delete the files under the Software Distribution.  I have restarted the computer at this time. After the restart, I had assured that the BITS and Windows Update When restarted, by default set to auto with delayed reboot.

  When I tried to check the updates, I received the error codes listed above.

  Can someone help me?

  Thank you
  Mario

  Hi Mario,.

  Your efforts to solve this problem is highly appreciated.

  Are you facing this problem with all updates or a particular update?

  The cause of this problem might be an interruption of the connection between your computer and the Windows Update.

  I suggest you follow the steps in the Microsoft KB article and check if it solves the problem:

  Windows Update error 0x8024a000

  http://Windows.Microsoft.com/en-CA/Windows-8/Windows-Update-error-0x8024a000

  You can also refer to:

  Automatic update of Windows: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• error code 80070673 for windows update for vista

  error code 80070673 for windows update for vista

  Hello Jwisetoyo,

  Thank you for your message.  Please click HERE for a possible solution to your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 646 when installing updates KB2288953, KB2288621 and KB2291599

  I get the error code 646 when installing updates KB2288953, KB2288621 and KB2291599.  My Dungeon udates on default.

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Update for microsoft security essetials KB2804527 (4.2.223.1) installation failure error code: 0x8004FF83 all other updates installed OK

  Update for Microsoft Security Essetials KB2804527 (4.2.223.1) Installation failure error Code: 0x8004FF83 all other updates installed OK.

  What version of Microsoft Security Essentials you run?

  What operating system and service pack?

  Prior security software?

  No matter what security software installed again?

  Please read the following:

  A possible reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software.

  You may need to use a cleaning tool to remove your prior security software:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-C05D-4546-8788-0aa4c25a1f91

  The current time and the date now in Ohio, the United States is

  07:28

  Wednesday, February 27, 2013
  UTC - 0500 (EST) Eastern Standard time

  UTC/GMT is 12:28 on Wednesday, February 27, 2013

  Current weather conditions in Columbus

  Cloudy4 ° C / 40 ° F

• I get the error code 8007005 when downloading updated 951847

  I get the error code 8007005 when downloading update 951847. It produces about 60-70% of fact. I tried a few times and still nothing. I have an Acer Aspire M5620 running Windows Vista hope first Edition, SP1. I use the automatic updates. I tried following the instructions on changing permissions, but I do not have the same path as in the answers here. He said that this is an important security update. Any help appreciated.
  I tried to use Mr. FixIt and he could not run the error code giving 2838

  Hello Redbiker_co,

  Method 1: -.
  Please download Windows Installer CleanUp utility from the link, below
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  After installation, run the tools by clicking Start--> Programs--> Windows Clean up.
  On the inside of the window, you will see different installed versions of the .NET Framework. You should choose & Remove only that versions of the .NET Framework, that fails to deploy every time-for which you receive error code. (i.e. you should only remove .NET Framework 3.5 & its application solutions packs)

  Then, restart your computer and manually install the following updates in the order
  (1) package Microsoft .NET Framework 3.5 from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  (2) Microsoft .NET Framework 3.5 Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7&displaylang=en

  (3) now, download the KB951847 patch manually.

  Method 2: -.
  Error code: 8007005 means of problems with permissions. Please perform the procedure below

  Run cmd.exe with administrative previlliges (right click on this file as an administrator)
  and type: secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  Now restart your computer & try to visit the Web site updated Microsoft or try to download the file manually from the link below

  If no help verify the steps using the link below
  http://update.Microsoft.com/microsoftupdate/v6/showarticle.aspx?articleid=13&ln=en

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --