Error code 80070539.
My laptop is not able to download the updates of Windows since the beginning of this year (I upgraded from Vista to Windows 7 last year) and gives me the error code 80070539. Y at - it something I can do to restore and download these updates (29 of them)? I tried to install at different times of the day and restored my computer and have tried the troubled steps shoot MS Update Center, but nothing seem to work. Please notify. Thank you in advance.
Following discussions on this subject, have tried?
Bravo!
Tags: Windows
Similar Questions
-
Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.
Hello Tallydupp, welcome.
Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
Try to uninstall it if it exists.Let us know what happens
Thank you! Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 has stopped updating the error Code 80070539
I just installed Windows 7 Ultimate Upgrade (from Vista) and while there are about 20 updates installed, I have come to a block with the Windows update code 80070539 encountered a error an unknown error. It was suggested to check that all my drivers have been updated what I did but still no good. I tried to load individually updates, but still not good.
0 X 80070539 ERROR_INVALID_SID
The security ID structure is invalidTechNet search result
There is not much information on this specific error, Clark and I don't know which SID, this is because it is an upgrade from Vista to 7.
Did fall on an old Windows 7 beta thread which shows the installed Version of Google Desktop was causing the problem. The OP uninstalled GD and update resumes.MowGreen Services consumer safety update
-
Error code 80070539 will not install in new Windows Pro 32
Starts to install, allows you to restore and shortly after "updates could not be installed" I closed Google desktop, 3rd party antivirus paused and have nothing else running. Will have some problem installing HP 6 L printer and get other software to work properly. He says I have 31 updates (140mbs) to install. Other ideas.
BestTech,
I looked round some and found that some people with this issue had uninstall Google Desktop in order to get the issue resolved. I suggest that you start with that and see if it solves the problem. You can see if Google has a tool of suppression for him. If this isn't the case, then you must use The Windows Installer Cleanup utility to uninstall.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 not loading no updates fail after trying to create restore point
Hello
Previous similar questions have suggested that this may be related to Google Desktop. You have this installed?
Otherwise, unless you are certain that the update fails after you have created a restore point, have you tried to disable restoring the system temporarily, then by reactivating it after a reboot?
http://www.nirmaltv.com/2009/03/14/how-to-enable-or-disable-System-Restore-in-Windows-7/
Then try to apply the updates.
-
Windows Update 80070539 error code
What is - this and why? At the stop, I get the message "do not disconnect or turn off as updates are... 1 installation of the 8 updates.
Since a few days I got the message that they all failed. Agree...? No page, etc.
I can not even find error code 80070539!
I searched this site, etc. I rebooted, etc.. Now, what... hmmmm?
Question: You receive error message: 80070539 when you try to install windows update.
Cause: Google Desktop.
Resolution: Find Google Desktop and uninstall.
Restart the computer.
Try windows updateWorked twice for me on two different computers
-
code 80070539 error when you download the update KB978207
I get the "80070539" error code when you try to install the update KB978207 for Internet Explorer 8 and Windows 7 by using Windows Update. The update fails when I try to install manually and when I also used Windows Update.
See if uninstall Google Desktop (or toolbar) & a reboot allows the update to install.
If no joy...
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I was trying to update my I-phone with IOS 10.02 6. While it was updating the phone, I received an error code-50. the phone is now stuck and I can't seem to exit the mode "update." What does this error code mean?
-
I keep getting an error code (-1) cannot restore iphone message what can I do?
My iphone 5 c don't continue reading 'no service' or 'research', but it has service through Verizon, I tried to switch to airplane mode, turning turn off / turn on the phone and restore with itunes, but during the restoration it shows error message - 1 will not restore, is there anything else I can do?
Try to restore 2 times more. If get the same error message
take the iPhone at the Apple store nearest for a free evaluation.
Once the diagnosis is complete, staff will explain your options.
-1 is the hardware failure error code. Assuming that no damage to the
your iPhone is not jailbroken, you may qualify for a reduction
the price of the replacement warranty.
Make a Genius Bar reservation to avoid delays.
-
What is the error Code (-18)
iPhone 6 sec more
iOS 10.0.1
Get an error code (-18) what this code means?
Some parts of the phone have been replaced lately?
What's your iTunes updated to the latest version?
-
The operation cannot be performed because one or more required items be found.
(Error code - 43)
I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.
I'm using an iMac with OS X El Capitan 10.11.6 operating system
Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?
-
AHT error code.
You have problems? Why do you run Apple hardware *?
Of
http://www.CNET.com/news/how-to-invoke-and-interpret-the-Apple-hardware-tests/
which would indicate a bad sensor on one of your memory modules or riser:
In the case of an error in probe (4SNS), to determine what type of sensor is referenced, look for his first letter, which should be 'I' for the current "V" or "T" for temperature, voltage.
Then check the second letter from the list below to see which component it refers to:
A: ambient air sensor
B: battery
C: Central processors (CPU)
D: DC (direct current)
e: PCI-express slot
F: FireWire port
G: graphics processor (GPU)
H: drive
h: heat pipe (heat sink)
L: liquid crystal display
M: memory or the memory riser cardsI would first install a monitoring app like Mac Fan Control of temperature
http://www.CrystalIDEA.com/Macs-fan-control
to see of you can find a bad sensor by reading the memory riser card.
You have a MacBook Pro as indicated: MacBook Pro, OS X Yosemite (10.10.5)
Since this is the Mac Pro desktop forum
-
4SNS/1/40000000 error code: VDOR - 18.678 &; 18.679
MBP early 2011: I just ran the AHT twice, the first round gave me an error code of 4SNS/1/40000000: VDOR - 18.678, second inning gave the code 4SNS/1/40000000: VDOR - 18.679. Does anyone know what are these error codes? My best guess is probably the RAM, I have (2) modules of 8 GB 1600 Mhz DDR3 OR wireless networking equipment installed. I've noticed recently while multitasking, the wifi connection seems to cling and web pages will not load/downloads will pick up. But the way in which applications will be blocked for 60 seconds makes me think of a bad situation of RAM I have had in the past. Any help would be greatly appreciated since the nearest bar genius lies in 2 1/2 hour. Thank you!
No RAM - 4SNS is a sensor error.
-
Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014. Installed their wake from sleep early support software.
Above error code invite you in this context: I wake up Mac in the morning after sleep. Transcend icon "wake up" and appear on the desktop (as it should). I check disk utility and the card is recognized. HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code? For about a week I missed that everything seemed normal. My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay. 90% of the time when I remove and reinsert the card, the operating system recognizes, all right. (There are a dozen times when I had to reboot for it to be recognized.)
All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL). This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution. FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences. Thanks in advance!
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Error code: sec_error_ocsp_unauthorized_request
I'm NOT going to be nice. Here's the description - I disabled the option "question responder OCSP servers to confirm the current validity of certificates. Has no effect. Still, I get this error:
An error occurred during a connection to * removed * .com. The OCSP server refused this request as unauthorized. (Error code: sec_error_ocsp_unauthorized_request)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please contact the website owners to inform them of this problem.
You... don't even leave the website to load. Try again. Try again. Try again. Try again. Try again. Try again. The certificate of the site is very well as evidenced by SIX different sites of the verification of the SSL certificate. I can't add an exception because FF is unable to obtain the certificate.
I tried to clear all - cache, cookies, history, blah blah blah
I am so bored of you people cost me more time.
It's fine in IE and Chrome.
If I didn't need Firebug, I would switch to Chrome right now.
edited because of the language according to the rules-forum-guidelines
You're right, it is not sensible.
Never made an exception for the site.
FINALLY, what worked was rename the cert8.db file in the profile folder so FF could generate a new. Then FF grabbed the cert very well.
Thank you for the help, sorry for the earlier rant.
Maybe you are looking for
-
Thunderbolt not connect not not on MacBook Pro (early 2011)
Hello I'm trying to connect my early 2011 MacBook Pro to a hub CalDigit Thunderbolt. The Mac does not see the hub at all. I tried the hub with Macbook Air from a friend, and it works fine, so I guess there is a problem with my Thunderbolt port. The T
-
extract data into recovery without backups Itunes or Icloud mode
Hello! Is it possible to extract data from a (4 s) IPhone in recovery mode without all Icloud or ITunes backups AND password of my phone? (Nothing dodgy on this subject... I am one fearing that someone can extract my data... :-()
-
How can I create an event listener for the change of variable shared or similar?
Hello I have a 'big' 6 devices communicating measurement system via the TCP protocol. The system is designed to use REST (the representative State transfer) with JSON (JavaScript object notation). Now, I need to add labview program to this environmen
-
<; Closed >; motorcycle G 1st Gen will get Lollipop in India?
What bike G 1st Gen will get Lollipop in India? I registered for test of impregnation as well but no update yet?
-
Trying to upgrade my cpu to A4313w.
I bought a Phenom II Quad Core AM Socket 3 (there was no 2 + listed). On the HP site, it recommends the Phenom II Quad AM2 +. When I bought the AM3 they said it works very well with the type of motheboard AM2 +. Indeed, when the processor arrived he