error code again once and I'm sick of it... 80072ee2

Similar Questions

• A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

  A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  Method 2:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  Hope the information is useful.

• I get 'unexpected error try again later' and Muse does not.

  Whenever I'm lunching Adobe Muse I get 'unexpected error try again later' and Muse does not.

  Hello

  Please close Muse and then delete the OOBE folder by following the steps listed in this document (listed in step 1): http://helpx.adobe.com/muse/kb/unexpected-error-occurred-i-200.html

  Once completed, run Muse and connect to see if it works.

  See you soon

  Parikshit

• What does error Code 0x80072efd HRESULT and how to fix it?

  What does error Code 0x80072efd HRESULT and how to fix it?

  If this error occurs during the update of Windows, see here: http://support.microsoft.com/kb/836941. (0X80072EFD - ERROR_INTERNET_CANNOT_CONNECT). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• When installing adobe creative cloud cc, encounters the error code: two hundred and thirteen.what can I do?

  When installing adobe creative cloud cc, encounters the error code: two hundred and thirteen.what can I do?

  I don't see a specific fix for this.

  go through these steps, download, installation or update of Adobe Creative Cloud applications error

• [Completed] Attempts to install KB977863 give error codes: 800736B 3 and dt000.

  Hi, I use Windows 7 Professional edition. The Windows Update 24.02.10 indicated that several updates are ready for installation. Everything installed OK except for KB977863 update for Media Center for Windows 7.
  I tried the manual installation; Help & support - ADVANCED; looking for the error code in this forum and tried the suggestions; I tried the windows update advocatus, but in vain.
  Anyone else had problems with this update?
  Kind regards
  Davy D.  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  I suggest you to run the system update readiness tool: Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/947821

  And even scan SFC, follow these steps:
  Open an elevated command prompt. To do this,

  i. click on Start ,

  II. click on all programs ,

  III. click Accessories , right-click command prompt ,

  IV. and then click on run as administrator.

  v. If you are prompted for an administrator password or a confirmation, type the password, or click allow or continue.

  VI. at the command prompt, type sfc/scannow and press to enter. Once the scan is complete, restart the computer so that the changes take effect

  Link for reference: http://support.microsoft.com/kb/929833

  Please return back with the results,

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 2000-0146 and 0F00:065 D and B 0F00:137

  I have a Dell Studio 1735 laptop.  Today it froze on me.  I could only make a hard stop.  I tried to log in again and got on the desktop with icons, but couldn't go further.  Don't have hard stop yet and I tried to go back to the top.  I made a kind of diagnostic tests and received the error code 2000-0146 following.  Also received the 0F00:065 D error reading DISK_0-self-test and 0F00:137 B DVDRW_1-disk is missing Virgin insert the data disc (example of the RCD).  I don't know what all these means.  Can someone direct me if it can be repaired and how I can fix it.  Or do I need a new hard drive.  Your help is greatly appreciated.  I use another laptop to write this message.

  The first two messages mean that the hard drive has failed. The third says there is no disc in the DVD drive, so it could not be tested.

• error code 646 KB2288931 and KB2431831 installation

  My computer fails to install 2 updates: security update, for Microsoft Office System 2007 (KB2288931) and update of security for Microsoft Works 9 (KB2431831) it displays error code 646.  What can I do?  I saw the update history and it lasts for several weeks.  Whenever I stop, it tries to install updates two same in vain.  I used the tool troubleshooting, but in vain.  Help!

  Read the following article about your error:

  http://support.Microsoft.com/kb/2258121>

• 80073AA2 Windows Vista error code update KB973917 and KB970430 Frustration!

  I have a problem installing the updates on my 32-bit Windows Vista laptop. I have both updates KB973917 and KB970430 both indicate the error code 80073AA2 and two KB976325 and KB971737 updates showing the error code 800F0826.  The laptop has the message that it is install update 3 of 3, is 100% then says that the updates have not been configured correctly - he keeps trying to install updates.

  I find it quite frustrating because this is the second time (the last was SP2) this year that updates have not properly configured and as a geek no I'm not able to settle this issue myself!  I got a very helpful guys at Microsoft call me before; However, if I can get some advice on how to fix myself I would be very grateful!

  Thank you, Maggie Ross.

  @MeggyRoss: Try this triple McAfee fix, especially if you are using McAfee Security Center-Online http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 80070057 KB963678 and KB963669 update installation microsoft office help

  Hello

  I have install all other updates successfully, these 2 have 963678 KB and KB963669 error code. Can you please help.

  Thank you

  Hello

  Hide updates and if you need it download - SAVE - go to where you put them - RIGHT CLICK -.
  RUN AS ADMIN

  You have Office 2007 installed?

  Updates for Microsoft Office Excel 2007 Help
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2fbf47a2-E338-4ed8-92f2-b0a146e8593c&displaylang=en

  You have Powerpoint 2007 installed?

  Updates for Microsoft Office PowerPoint 2007 Help
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7a813892-2033-4210-B96C-10de08abc6ac&displaylang=en Rob - bicycle - Mark Twain said it is good.

• Error Code 0F00:1344 and 0F00:136 C

  I have recently re installed in my desktop Dell (Windows XP), a Laser Dell 3000cn printer driver. I downloaded it on the internet that I lost the installation CD. It worked fine at first, but when I turned off the Pc and reboot it drew this blue screen and message:

  STOP: c0000135 {component impossible not found}

  This application has failed to start because baserv was not found. Reinstalling the application may fix this problem

  I tried to make a secure boot (F8 option) and a restart with the last configuration that worked and he finds himself in the same blue screen

  I went to the menu of Boot (F12) and selected a diagnosis of IDE hard drive and ran a quick test. I typed the results below:

  Main menu: Service tag 5JM0X61

  Test Express

  Error Code 0F00:1344

  MSG block: 1310933: error impossible to correct data or media is write protected

  MSG block: 1311804: error impossible to correct data or media is write protected

  Error code: 0F00:136 C

  MSG: IDE device failed: Blank media or no media in the optical drive. Tuberculin media with digital data (Resource CD, CD of Installation)

  Can I get help to recover my files at this point?

  Thank you very much!

  Happy new year!

  Cecily

  Hello

  ·         Have you downloaded the driver from the Dell website or a third-party Web site?

  ·         Do you have the XP installation disc?

  ·         What service pack is installed on the computer?

  Step 1: Disconnect any external devices, including the printer and restart the computer.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Has no Windows updates with error codes Vista: 80070641 and 641

  Using Vista Home Premium 32-bit. Have not been able to install updates for the past week and the error codes I get are not listed by Windows. It comes to 80070641 and 641. Is the computer safe to use?

  Mike in Maryland

  Hello

  1. What is the number of KB (Knowledge Base) for the update of Windows?
  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: run the Microsoft Fixit and see if it helps.
  http://support.Microsoft.com/mats/windows_update/

  Method 2: perform the steps in the article mentioned below and see if it helps.
  http://support.Microsoft.com/kb/818018/

  Hope this information helps.

• Error code Update 663 and 80070663

  Every time I try to install the latest updates for windows vista security-, I got microsoft office 2007 and windows SP2 security update

  I get these 663 and 80070663 error codes. Help, please

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft fixit from the link below.

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Step 1:

  Put the computer to boot.

  Click on the link below

  http://support.Microsoft.com/kb/929135

  NOTE: after you perform the troubleshooting steps, return to the computer to start as usual (see step 7 from the link below)

  Step 2:

  Manually, try to install updates from Microsoft Download Center.

  a. visit the Microsoft Download Web site, type the number of "KB" of the update in the search box and press ENTER.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Microsoft Download Center

  http://www.Microsoft.com/en-us/download/default.aspx

  Method 3:

  Follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/2509997

• 800B010B installation updates error code Windows KB2478663 and KB2518870

  Original title: having difficulties to install KB2478663 and KB2518870

  Hello world

  I received this error code 800B010B when installing KB2478663 and KB2518870. The operating system I use is Windows Vista.

  Hello

  1 did you change on your computer before this problem?

  2. what anti-virus software is installed on your computer?

  You can follow the methods below and see if it works very well.

  Method 1

  You can run the preparation tool update system from the link below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Method 2

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  If the problem persists, you can try to install the KB updates manually in a clean boot state and see if it works very well.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Stage ii

  Download the KB from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26312

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26409