Similar Questions

• Error codes: 643, 8007066F & 80070103 (cannot install updates)

  Tried to install the latest updates and got three error codes: 643; 8007066F & 80070103

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052>

  0X8007066F ERROR_UNKNOWN_PATCH
  The update is not applied to this product.

  (1) * which * update fails to install?
  (2) * what * is the edition of Windows; Service Pack much * is it on?
  (3) don't you try to download manually, * save the update * and then
  try to install it manually again?

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx>

  Windows Update 80070103 error code applies to all editions of Windows Vista.
   http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103>

  See also the below Knowledge Base article suggestions.
   
  You receive error 0 x 80070103 when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/952032

• I got error 46 and I don't know what to do!

  I got error 46 and I don't know what to do!

  Cannot install Creative cloud installation - error code 46

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I get this error code and I don't know how to fix it please help!

  Photo Gallery

  I get this error code and I don't know how to fix it please help! Windows live Photo Gallery encountered an error loading WLXPhotolibarymain.dll error code: 0x800736b1

  You will find support for WL photo library in this forum: http://windowslivehelp.com/forums.aspx?forumid=cafb0556-8959-49b9-afeb-635314aa02f3

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error code 643 prevents me to install my windows was last updated.

  original title: error code 643 prevents me to install my windows was last updated. Recently, when I go out I told me repeatedly that I have 1 new updates to install. It never goes away. Is there a link?

  When I try to install the latest version of my windows update fails because of an error 643. Also when I leave my computer I tells me several times that I have a new update. This has happened every time that I have left the system...

  Hello Ray Kouri,.

  Thank you for using the Microsoft answers Forums.

  Solution for code 643:

  It is a common problem with the updates of the .NET Framework.

  http://support.Microsoft.com/kb/923100

  Follow the steps in the link above to fix the problem.
   
  That should make the tirck for you.

  Thank you.

  Kind regards

  Augustine. UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments.

• When I press the download profile it keeps giving me an error message and I don't know what to do

  When I press the download profile it gives me an error that says safari could not install a profile on an unknown error and I don't know what to do

  You cannot download files via Safari. Files PDF is the only exception I know.

• 646 error code and Error Code 643 continue to pop - up when I use Windows update to download updates.

  The program generally I encounter problems is Internet Explorer.

  Hey trouble_free,

  Please follow the instructions in NYintelligentinvestor from the link below.

  Error code 646

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/043e5807-575d-45e7-9320-1dc415b5ee20

  For 643 error, see this article for troubleshooting steps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/958052

  Hope that the information provided above are very useful.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 643 KB954430 installation and manual installation does not work

  Hello

  I had a problem with the update KB954430. He always needs to be installed even if the process was successful each time.
  First I tried to search the Internet for a solution and I followed the advice given by a single site. (Vistaheads.com)
  The Council is as follows:
  "
  Microsoft Help/Support

  Step 1: Download Microsoft Windows Installer CleanUp utility

  =============================================

  1. visit the following link to download the utility:
  http://download.Microsoft.com/downlo...BD/msicuu2.exe

  2. save the file on the computer.

  3. install this tool on the computer.

  Step 2: Remove the MSXML software

  =========================

  1. Click Start-> (all the) programs-> Windows Installer Clean Up.

  2 see if you can find MSXML software. If so, remove them.

  3. restart the computer.

  After that, please try to reinstall MSXML 4.0 Service Pack 2 and MSXML 4.0
  SP2 security update and KB927978 KB925672.

  Step 3: Reinstall MSXML 4.0 Service Pack 2

  ================================

  1. Please download MSXML 4.0 Service Pack 2 and the related updates of the
  links and save them to the desktop.

  MSXML 4.0 Service Pack 2

  http://download.Microsoft.com/downlo...629C/MSXML.msi

  MSXML 4.0 SP2 (KB936181) security update

  http://download.Microsoft.com/downlo...936181-enu.exe

  2. when the file download window appears, click the button Save, and
  follow the directions to save to the desktop.

  3. After downloading the file installation of MSXML 4.0 Service Pack 2 and its updates
  on the desktop, please double-click the files to manually install a
  by one.

  "
  I followed exactly the instructions given by the site. I installed Windows Installer Clean Up, I then found three software MSXML and removed all three of them. Then, I downloaded the two files, msxml.msi and msxml4-KB936181 - enu.exe and installed in the order previously cited.
  However, after that when I tried to install the windows update update recommended and I got error Code 643. I could not even install successfully the update more. I tried a manual version of the update, found and downloaded the file msxml4-KB954430 - enu.exe.
  When a manually run the program, this is the error message that appears:
  "Could not open key:
  UNKNOWN\Components\7A17F1B46C057B443ADA6B3C75B48B69\DDA39468D428E8B4DB27C8D5DC5CA217. Check that you have sufficient access to that key, or contact your support person. »
  I am running Windows Vista Home Premium 64-bit on a laptop Acer Aspire 6930.
  And running out of ideas on how to solve this problem.
  Help, please
  Gabriel

  Hello

  Go to the free support, however check in Windows updates to see if it is already installed and also the
  KB article to see if you still need (and there is a good change that you do not and that is why it will not
  install - it happens).

  It's this update
  http://support.Microsoft.com/kb/954430

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I get error code KB70653 whenever my system updates, don't know what what it means__

  I keep getting error code KB70653 every time my updates of the system, don't know what it means

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I keep getting error code 643 what's wrong! . NET FRAMEWORK 1.1 SERVICE PACK 1

  Is there a quick fix?

  Uninstall all the framework & reinstalled tried to install always the same error code 643.

  Help!

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://msdn.Microsoft.com/en-us/KB/kb00318785.aspx

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After running the cleaning of .NET Framework (not the Windows Installer Cleanup utility) tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  =========================

  What to do if other .NET Framework configuration troubleshooting procedures do not help:
  http://blogs.msdn.com/astebner/archive/2008/03/07/8108332.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

  Hello raulganau, welcome.

  I suggest to try the system restore to restore the system to a date before the problem started. Try this...
  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."
  6 follow the instructions on the screen to restore the system to a date before the problem started
  Although the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.
  For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:
  http://support.Microsoft.com/kb/306084
  Let us know if it works,
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my windows vista computer does not recognize the cd. I get a code 19, incomplete or corrurpt. I don't know what else to do.

  error message 19, cd/dvd OPTIARC incomplete or corrupted, I don't know what else to do, I inserted the disc gateway and restarted the account to factory... state what a mess I had to install the updates and lost everything. I'm now getting to where it should be but still a few snags in addition to the dvd, when I surf the internet the pointer slips across the screen I can't see the icon on the status bar when I would press the button / mouse on laptop, it would show. It has now disappeared. I have several questions which I'll add later. Help, please! I'M NOT A COMPUTER EXPERT.    In addition, my computer shuts down while I'm online (watch the video live shows) when I plug the power cord into an extension cord with a grounding CE adapter wants to SAY WHAT?

  Continue on the checklist. Rob - bicycle - Mark Twain said it is good.

• Session state protection violation: this can be caused by manually editing the protected page P67_C point. If you don't know what caused this error.

  Hi friends,

  I create three field A textfield,textfield B,C textfield and apply the formula with dynamic action.

  C = A + B.

  Now, I want to protect user could not be total change at point C, so I change it is property of the text field to display only and change in

  Settings-> save the Session State-> Yes

  After all changes when I ran page and provide the registry then it shows me error below.

  Session state protection violation: this can be caused by manually editing the protected page P67_C point. If you don't know what caused this error, contact the administrator of the application for assistance.

  
  

  How to disable the total at point C when I use the dynamic action to calculate the Total of A + B.

  Thank you.

  
  

  
  

  
  

  Hi Maxence,

  1. in the case of a display one element

  Change your point of P67_C and change the State of Session Save-> No.

  2. in the case of a text field

  Change your point of P67_C and make it read-only

  go to the attributes of the HTML Form element-> readonly = "readonly".

  Hope this helps you,

  Kind regards

  Jitendra

• We are trying to make a quick payment of payment workbench and is "FRM-41830: error in values list of the no entries for payment document column / field.» Payment document format seems good. Don't know what the issue is.

  We are trying to make a quick payment of payment workbench and is "FRM-41830: error in values list of the no entries for payment document column / field.» Payment document format seems good. Don't know what the issue is.

  Found the Solution...

  PPR (profile of payment process) has not been set to check Format selected in the configuration to "Manage the payment Document".