I get this error code and I don't know how to fix it please help!

Similar Questions

• I have a Canon MG6120. When I start it up I get the error code 5050. Does anyone know how to fix this?

  I have a Canon MG6120 all-in-one. When I start it up I get the error code 5050. Does anyone know how to solve this, more power to the wide / power?

  Hello gregg.

  Please, try the following to see if we can solve your problem:

  1. turn off the printer.

  2 disconnect the power from the printer for at least 5-10 minutes.

  3. once unplugged, remove any paper from the device.

  4. check for obstructions in the paths of the unit or the paper.

  5 If no obstacles are, plug the power back in and switch on the device.

  If the problem persists, the unit will require repairs for the correction.  We apologize for the inconvenience.  Please contact our support group using the 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help at the Contact Us.

• Im having problems with my computer. My computer needs to install the important updates 13 but every time is about to complete, a message appears saying error found and I don't know how to fix this problem.

  I did not any changes to my computer.
  This "error" is displayed whenever the computer tries to update.
  It says code XXX.
  And I like many updates that says they don't have to settle.

  Hello

  You must always specify the actual error codes.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• 0 x 80240036 get this error code and don't do the update.

  0 x 80240036 get this error code and don't do the update. Message says "the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. Ive tried for three days to do the update and I tried at home and at the office, but I get this message.

  I have updated to internet explorer 8, and then it worked.

• I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

  I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

  Signature of the problem
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  Mini092911 - 02.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 116
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

  AND:

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)
  WD-20110929-1029 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 9CEE7510
  BCP2: CA 8, 16700
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

  Hello

  Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
  is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
  and ask in their forums known issues.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  ----------------

  BCCode: 117 0 x 00000117

  Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

  BCCode: 117 0 x 00000117<-- read="" this="">
  * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

  1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
  of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

  2 are looking for Virus/Malware.

  3 check the hard disk for errors - run Checkdisk (see below)

  --------------------------------------------------------------------------------

  The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
  special meaning (other than pilot caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hello! For months, I want to cancel my subscription, I'm Italian and I don't know how I can do! Help me please

  Hello! For months, I want to cancel my subscription, I'm Italian and I don't know how I can do! Help me please

  Hello Giulia,

  If it's subscription month. You can cancel this subscription form your adobe account:

  Cancel your membership creative cloud

  Otherwise please contact support:

  Contact the customer service

  Hope this will help you.

  Concerning

  Megha Rawat

• Adobe Bridge in CS6, the metadata model is wrong, and I don't know how to fix it

  (Windows 7 64-bit) Adobe Bridge in CS6.

  Until two weeks ago, I could open any of my picture files, and then click file, information file. Categories of metadata would be displayed, including the first category of page that has the copyright, author, description, keywords, etc..

  Recently, the first category of the page is missing. I don't know how it happened, and I don't know how to fix this to return to the metadata with all categories.

  It is not a question to edit new metadata, because the correct category is absent, there is no correct place to put the missing metadata.

  I tried to create a new metadata template which has categories, but I can't understand how Adobe Bridge to use for picture files.

  Any suggestions?

  Click on the arrow down in the upper right to bring up the panels you want to display.

  

• Error 1009 and I do not know what to do exactly, please help me

  Hello

  I wish you could help me

  I am a beginner in actionscript 3.0, and I have a main SWF, with a menu and buttons, when I click on each button, a new swf must be loaded and the menu is resized and goes to the upper-left corner of the page, and if I click on the menu, he should be back...

  the problem is that when I click on the first button, everything works fine, but when I click on another button, I get this error:

  TypeError: Error #1009: cannot access a property or method of an object reference zero.
  at s_fla::MainTimeline/s_fla::__setProp___id0__Scene1_texte_2()
  at s_fla::MainTimeline/s_fla::frame2()

  I realized that the problem is the file that will be displayed before it was loaded.

  I also found that I have to use the event. ADDED_TO_STAGE, but I don't know where to put it?

  could you help me please?

  Here is my code:

  function size(e:MouseEvent):void {}
  menu_mc.gotoAndPlay (2);

  menu_mc.buttonMode = true;
  menui_mc.addEventListener (MouseEvent.CLICK, showmenu);
  
  menu_mc.button01_btn. RemoveEventListener (MouseEvent.CLICK, size);

  menu_mc.button02_btn. RemoveEventListener (MouseEvent.CLICK, size);

  menu_mc.button03_btn. RemoveEventListener (MouseEvent.CLICK, size);

  addChild (cliploader);

  }

  function size(e:MouseEvent):void {}
  menu_anatomie_mc.gotoAndPlay (13).

  menu_mc. RemoveEventListener (MouseEvent.CLICK, showmenu);
  menu_mc.button01_btn.addEventListener (MouseEvent.CLICK, size);

  menu_mc.button02_btn.addEventListener (MouseEvent.CLICK, size);

  menu_mc.button03_btn.addEventListener (MouseEvent.CLICK, size);

  removeChild (cliploader);

  
  }

  menu_mc.button01_btn.addEventListener (MouseEvent.CLICK, loadpage);

  menu_mc.button02_btn.addEventListener (MouseEvent.CLICK, loadpage);

  menu_mc.button03_btn.addEventListener (MouseEvent.CLICK, loadpage);

  
  menu_mc.button01_btn.page = "file01.swf";

  menu_mc.button02_btn.page = "file02.swf";

  menu_mc.button03_btn.page = "file03.swf";

  
  function loadpage(e:MouseEvent):void {}
  
  cliploader.myldr.source = e.currentTarget.page;

  
  }

  Please tell me what to do exactly

  PS: cliploader is an IU charger which is present on the scene

  in my swf files, I FLVPlayback instance that loads an flv file, and I think that it is the source of the problem, because I tried the same thing with a simple swf file that may load quickly, and I do not have this error

  Thanks in advance

  You can be more certain where the error comes from the if you go into your publication settings and select the option to enable debugging.  When the error message appears the next time it should include the line number for the problemed code.

  For the code, show you that you should have more problems due to using the same name of function for different functions.  You can't do that.

• PSE - tape only uppercase. Cap lock ON NOT. Had this problem once before, but don't know how to fix it.

  PSE only typing in capital letters. Cap lock ON NOT. Had this problem once before, but can't remember how to fix it. Can anyone help?

  Hello

  1 > try using a different font.

  2 > select the text tool. Reset the the text tool by clicking on the arrow down on the tool Option (Top Left side)

  

  Hope that helps

  Assani

• I have an error, missing wxmsw262u.dll and I don't know how to fix this error, please help.

  Try to find a solution to this problem and do not receive the case? I have read that I need to get the file off her recycle bin but that is empty. My PC Tools has been clean the tray for me is not that nice. I tried a recovery tool, but the file has disappeared for a long time to recover. I have the game Unreal Tournament 3 abd she needed a server crash bu patch that he would charge not because of the missing dll file. I can't play my game and I'm going to cry, I.; m 57 years and don't have a lot of time left in the world so please help me soon.

  Hello

  There is a long list of things to try to solve this problem

  you have to work your way through them

  http://pcsupport.about.com/od/findbyerrormessage/a/wxmsw262u-DLL-not-found-missing-error.htm

• Error code of reading on windows xp home edition. The error code is fffffc02. Someone knows how to fix this?

  I am trying to reinstall windows xp home edition on my laptop after I dumped everything and I get an error that says: "the signature for windows xp home edition Setup is invalid. The error code is fffffc02.  The system cannot find message for message number 0xfffffc02 text messages for syssetup.dll file. Anyone know how I can fix this or something?

  Hello 2009 poster... Welcome to 2011 and I'm sure by now that you have bought a new computer or obtained the answer elsewhere.

  This is in short, that I just got this error working on a disk recovery & Dell laptop.

  This is probably due to read/write to the CD/DVD drive.  It's very annoying and simply a file library, catalogue missed reading it will mess this!

  Error & you can get there... I get closer and closer each time.

  I think this guy CD-ROM drive is odd OR even better the quality of the recovery disc might be off too.

  Other errors are too 0xfffffc02 | fffffc02 - and read the newspapers it is always a mistake in the reading of a file.

  I just got this new while typing, but I was in there last time - 15 minutes so you can see the weird nature of it.

  Rob

• my itunes does not work due to a DEP problem and I don't know how to fix it

  can anyone help my get my itunes to work again for the DEP will allow him to open

  Hi bspack12,

  1. you receive messages or error codes?

  Data Execution Prevention (DEP) is a security feature of Windows, tracks how programs use memory. If DEP finds memory used incorrectly, DEP closes the program and let you know.

  Step 1:

  Try the following steps to turn off DEP for iTunes and check if you open iTunes.

  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.

  b. click on advanced system settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. running, click settings.

  d. click the Data Execution Prevention tab and then click on turn on DEP for all programs and services except those I select.

  e. restart and see if it is resolved.

  Check out the link:

  Change Data Execution Prevention settings

  http://windowshelp.Microsoft.com/Windows/en-us/help/1d9bb9b4-f6ba-466D-AC2B-7b8c4f8361611033.mspx

  If you're still having problems, you can read the following article and try to uninstall and reinstall iTunes:

  http://support.Apple.com/kb/HT1923

  Hope this information is useful.

• Message "not a copy authentic WinPro7' but it is and I don't know how to fix it.

  I have a computer that is running a legal copy of Win 7 Pro and I installed a new hard drive and reinstalled the software.  now, I get the message that it is illegal copy but that is not possible.  How to fix?

  It TURNS out that Microsoft has helped me and I am fixed.  A fellow in India (who has been very helpful) could not help me, but put me through a young woman in Manila, and she was very helpful.  My computer is now fixed and I'm happy that I don't have to lose all the programs and files that I had already entered on it.  There were updates about 75 until this problem came as well.  Don't have to go through all that again.  Also thank you george1009.

• Help! I messed up the audio equalizer on my computer and I don't know how to fix it!

  Hello

  I watched the sound options on my computer (Windows XP) and I did something to the equalizer that messed up the sound. I have Realtek HD Audio Manager, if that helps. The screen where I did something shows the equalizer and allows that you choose things like 'pop', 'rock', 'living', etc. I have no idea what I did but I can not get the sound back to normal. I tried a bunch of different choices (pop, rock, bass, treble, etc.), but none of them felt right. I also tried a button that says "Reset the EQ setting" but what has all the right settings equalizer in the middle and has no sound right either.

  I thought there will be a way to get back to some kind of windows by default, but I don't see that anywhere. Can someone help me?

  Thank you very much
  Tracy

  Default settings which is neutral, is normal.

  To get the sound you want, it uses your realtek Manager thingy.

  See you soon,.

  Jerry

• I have aLEXMARK PRO707, which operats wireless. Wish to connect the scanner to my computer to print and I don't know how to do it. HELP PLEASE

  My computer is an ACER Travelmate 3270.

  The COPIER, LEXMARK PRINTER, SCANNER, COPIER is connected to the computer (wireless).

  Printing is not a problem.

  I would like to connect the LEXMARK to ACER for ANALYSIS and I donot know how to do.

  The LEXMARK is the ACER COMPUTER reading and ask the set up to be.

  Can anyone HELP in this regard.

  Tanks.

  This should help or contact the support technique printer because Microsoft is the manufacturer of your printer.

  http://www.ehow.com/how_5966263_use-Lexmark-ALL_IN_ONE-scanner.html