Error: Could not open address book database

Similar Questions

• TrueSuite Fingerprint error "error: could not open the specified database.

  Hello

  I bought new Toshiba Satellite P300-PSPCCA two weeks back and fingerprints worked very well. Suddnlly stoped working. I was getting connection to fingerprint for the unavailable error message when I start my laptop. I try uninstalling and reintalling software Truesuite and dirvers but no luck. I downloaded the latest version of the software from toshiba Web site but still no luck.
  I was looking for a solution and I have read on several forums that must back the driver, if who does not then the only solution would be the factory default setting.

  I try to roll back the drivers, but still, it does not solve the problem. Finally, I put my laptop to factory default and still having the same error message...
  I also tried to delete all fingerprints via the Truesuite software but I get "error: failed to remove fingerprints...

  It has no option in the bios to wipe the fingerprints of memory... because I saw in IBM there is option in the bios to remove the fingerprint via bios... but not at toshiba...

  I really need help with my problem... Please... someone help me...

  Kind regards
  Jay

  Hello

  These questions are not easy to solve. Many people have noticed problems with this software and everything what you have done is OK, but one thing is strange to me.
  After the new installation of the operating system using the Toshiba recovery image everything should work perfectly. After doing this you have the same situation as after the purchase and start. Then I don't understand how you can have this problem again. The fact is that the stored data will be removed by cleaning the drive HARD or OS recovery to factory default state.

  On this forum, you will find many similar topics. Please put impossible to open the database specified as search terms in the advanced search option and check the listed topics. You may find the final answer.

  Good luck!

• Portege R600 of fingerprint problem: error: could not open the specified database

  Hello

  I am trying to give the registration of fingerprints for my Toshiba Portege R600-101 and I get the above error.
  I tried also on windows XP and Vista.

  Has anyone with the same problem or anyone suggesting a solution?

  I uninstalled the truesuite Access Manager but still the same problem.

  See you soon.

  Hello

  I noticed a new update for software fingerprinting for protected R600.
  Remove the old application of fingerprints, restart the laptop, clean the registry and the system using a 3rd party too (CCLeaner is free and not bad).
  Then reboot again.

  Download the fingerprint on the page of the European driver Toshiba Software and install again.

  Check it out!

• Question of TrueSuite of fingerprint - error: could not open impression fingerprint sensor

  Hello

  A few days ago my TrueSuite reinstalled himself and then asked to restart the computer, which I did. But things, when I turned on the computer laptop back to reboot, TrueSuite will have to reboot again. This happened a few times, so I reset the laptop to a system restore point, I had created a few days ago.

  This deleted all my fingerprints, which I don't mind, but when I go to re-register my fingerprints, it says: "error: could not open impression fingerprint sensor.»

  PLEASE HELP ME WITH THIS!

  Thank you.

  See European driver of Toshiba for the most recent software TrueSuite to fingerprints.
  Remove your old software of fingerprint of the computer and reinstall the new software downloaded from the site driver of Toshiba.

  Then set it up again, create fingerprints and take advantage of the laptop.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• Error: could not open the file splittet files

  Try installing Adobe Digital Edition and get the error "Could not open file for splittet files."  Have removed and installed all the adobe reader and flash programs very well, but can not get it to install.  Ideas?

  Hello

  I suggest you contact Support Adobe as the error seems to be related to this product.

  http://www.Adobe.com/support/

  You can also post your query on the Adobe forums for assistance.
  http://forums.Adobe.com/index.jspa

• ERROR: Could not open "usbport.sys! in Vista

  whenever I try to install usb mouserate switcher it says...

  help with usb mouserate switcher

  Operating system: UNKNOWN

  ERROR: Could not open "usbport.sys!
  Make sure that the file is not dead
  and your account has appropriate access privileges!

  does anyone know why this is and how to fix it?

  http://www.google.com.au/search?hl=en&q=USB+mouserate+Switcher+for+Vista&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  Read the info from Google.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.Softpedia.com/get/tweak/system-tweak/USB-mouserate-switcher.shtml

  Read the above info.

  See if that helps.

  "Switcher Mouserate USB will allow you to apply a rate of vote of mouse to 250 Hz (4 ms), 500 (2 ms) or 1000 Hz (1ms) and allow you to restore original Windows 'usbport.sys' (8 ms) if necessary.

  INSTRUCTIONS:

  1. reboot Windows and log in Mode safe mode with an admin account
  2. run this utility in safe MODE and follow the instructions
  3. restart your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• JavaLoader error: could not open the file

  I developed a small application and I'm trying to install it in my camera (Curve 8900) using the javaloader. I used Blackberry plugin for eclipse to develop my app and it works very well in the Simulator. I got the shape of keys BB to sign the application and all of the APIs are now signed.  the javaloader that I use is the one in the eclipse installation folder:

  C:\eclipse clasic\plugins\net.rim.ejde.componentpack4.2.1_4.2.1.19\components\bin

  I use this version because I used to develop the small JRE 4.2.1 application in eclipse.

  and the command is: javaloader.exe u load myapp.cod

  I get just the error: error: could not open the file and nothing is copied to the device.

  The connection is good because I am able to see the device help info: javaloader-u deviceinfo

  I have just the knowledge base on the development for BB and it's my first show stopper...

  Thanks in advance for your help

  This is the solution... I managed to install the application without delay!

  Thank you very much

  Jesus

• 25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  25541 error could not open xml file c:\windows\microsoftnet\framework\v2.0.50727\config\machine.config, 2147024786 system error... what kind of error is it?

  I had tried... .but not possible... someone has this problem soluton...

  Prom KrishnaNyaupane Hello,

  Please check the TechNet link below for a proposed solution.
  http://social.technet.Microsoft.com/forums/en-us/officesetupdeploy/thread/86787c69-5909-4885-843e-b8b977e5cc33

  Let us know if it helps.

  Marilyn

• Power error: could not open the file exists

  This weekend a partition containing my virtual machines VMWare has been accidentally deleted by the Acronis backup software
  I have rebuilt the partition and re-assigned the same drive letter.
  Then I restored the 'Virtual Machines' from my backup folder.
  Now when I run VMPlayer and start my virtual machine I get the following error:

  Power error: could not open the file 'H:\Virtual Machines\Windows\XP Professional\Windoes XP Professional.vmdk': the system cannot find the specified file.

  The directory search I find the file with the name and the correct directory path.
  Some attributes (readonly, hidden, etc.) are on.
  I am logged in as administrator.

  Is there some other files/directories should I have also restored?
  Suggestions?

  "" According to the newspaper files of the virtual machine has a 40 GB virtual disk consisting of 21 files Windows XP Professional - s001.vmdk '-Windows XP Professional - s021.vmdk. However, the screenshot shows only 5 of these files hard! Please check if you can recover the missing files.

  André

• Impossible to turn on the virtual machine with the following error: could not open the disk ' / path/to/vmdk-0001.vmdk ' or one of the Flash disk it depends on. Reason: Broken pipe.

  After the movement of virtual machines in VmWare Server 2 for ESX 4i, I get this error when you try to start the virtual machine:

  Impossible to turn on the virtual machine with the following error: could not open the disc

  "/ path/to/vmdk-0001.vmdk" or one of the Flash disk it depends on.

  Reason: Broken pipe.

  Anyone's idea what is the problem here?

  How did you move virtual machines?

  Did you use the converter (https://www.vmware.com/tryvmware/?p=converter)

  Otherwise try converter

• 2% failed: ERROR: could not open the file %s

  I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please

  10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10

  10:32 step 2: creation of target virtual machine and the conversion of the data

  10:32:05 configuring settings for the virtual machine target...

  10:32:07 creating virtual machine target...

  10:33:04 ERROR: could not open the file %s

  The newspaper has been attached

  I already test the TCP 902 on the source by telnet to the target ESX machine and it seems that TCP 902 is open. The result of telnet has also been downloaded.

  Help, please!

  Problems with vConverter.

  StarWind Software R & D

• VMware Converter failed % 2: ERROR: could not open the file %s

  I'm trying to convet system winnt in esx, always fail in the setp2. I tired to convet locally and remotely and get the same error message. Help, please

  10:32 step 1: connecting to Agent VMware Converter on 172.19.129.10

  10:32 step 2: creation of target virtual machine and the conversion of the data

  10:32:05 configuring settings for the virtual machine target...

  10:32:07 creating virtual machine target...

  10:33:04 ERROR: could not open the file %s

  The newspaper has been attached

  This is the result of that port TCP 443 is blocked?

  Nope

  More likely, the system of the source (172.19.129.10) cannot reach the host ESX by DNS or TCP Port 902 is stuck between them.

  HA - nfc: / /------Corcus [storage2] / [email protected]:902

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.