Error display chronogram Foxpro

Similar Questions

• Error "display driver stopped responding and has recovered" seems to have led to big problems...

  Last night, I was watching a video on my computer and it froze for a minute, and I got the error "display drivers is not responding and have now recovered." I was a little confused, but this allowed me to continue to play the video. I played it again, and 5 minutes later, I had the same thing. He continued, the case most often. Thereafter, whenever I went to play the video, he froze.

  It seems to get worse and worse - the computer has finally restarted itself and made a sort of "Scan disk", which took about 10 minutes. I was hoping this would be the cure but after it loaded up, it happened to go to a blue screen and stop again. This happens everytime I turn on the machine now, a blue screen and it will restart.

  I noticed that whenever I rebooted the computer, the image quality is degraded (i.e. the random colored lines on the screen). It was late, I therefore stop the machine and went to bed. I just started the computer this morning and opened in Mode without failure. This time he opened, however the picture quality was terrible - worse than ever. Multicolored lines all over the screen - I could hardly read the text on the screen, so I shut it down again.
  I now type on PC to my parents because my is pretty useless.
  Anyone has any idea what it could be? Or what I could do to fix it? This was happening to anyone else? This problem is related to the initial error message "display driver"?
  Thanks in advance for your answers,
  Jay.

  Of what you said is probably a problem with your graphics card. It could be the problem hardware or software problem. If it's software problem then it could solve more easily. You could start here:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  But if it is the hardware problem, then you should contact the manufacturer of your computer or you need to replace the graphics card.

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• How to solve 'error display driver - video playback device does not support playback of protected content?

  This message started on my installation of windows 7 media center with the installation of tuner Cable Digital ati a few months.  I had the computer in my office with no monitor for a while and watched TV through my xbox on my samsung ln52b610.  so I decided to connect to the PC directly to the tv and now get this message saying 'error display driver - video playback device does not support playback of protected content'.  the strange thing is that if I go full screen, then new Media Center, here again, it seems to go away (most of the time).  my video card is a 8500gt nvidia with hdmi output and I tried the latest driver from them and still no worky.

  Take a look at the support links that can help solve your problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-TV/protected-content-error-after-a-few-seconds-of/da074c94-e741-E011-9767-d8d385dcbb12

  http://social.technet.Microsoft.com/forums/BG-BG/w7itpromedia/thread/3eea4165-8e37-42b7-A396-62663cc516a7

  If no go, Greenbutton forum would be place to post the question: http://thegreenbutton.com/forums/

• Bind the Variable for: 'No. Inline Validation errors displayed' existing?

  Hello
  
  Is there a variable corresponding to 'No Inline Validation errors displayed' APEX?
  I would test this variable combined with others for complex validation scenarios.
  
  Kind regards
  
  Christian

  Christian:

  You can use 'wwv_flow.g_inline_validation_error_cnt' to determine the number of online validation errors

  CITY

• Error display driver while playing games on Satellite P100 - 387 PSPA3E

  Hello

  I have a portable Satellite P - 100 387 PSPA3E (with Nvidia 7600 GO 256 MB) and any game I play, I get a Stop error - blue screen of death all the time and must restart.

  Sometimes while I play 'Command & Conquere-Tiberium Wars' or 'Warcraft III' (which can run on ANY machine of low-end). Because the update of the BIOS and got the last support display driver Toshiba. Nothing. In addition, I ve tried ALL versions of Nvidia and LaptopVideo2go.com pilot with modded inf-s.

  Don t know what to do, I post here before you contact Toshiba. I have a valid warranty on the computer. Running MediaCentar of XP that came with it.

  Thanks in advance!

  Hello

  I put t really know what to say. Before you wait here, you should contact the Service partner in your country and leave check your laptop. You must explain what is exactly happening.

  I hope that they will be able to help you. Please let us know if you will have more info on this issue.

• Error during automatic error display enable management option is on

  To display error messages do I need general error handler or simple to implement so I have automatic error enable handling on?

  The two (possibly) displays a popup when an error occurs. The General error handler just has more options for special cases. The simple error handler is usually sufficient.

  If you havce automatic error enabled, you will get a popup whenever a function generates an error AND the error output is not wired. Once wire you an error handler, the automatic error handling can no longer be.

  To display an error, you can also simply place an ordinary error on front panel indicator. This avoids the annoying popup messages.

• Pavilion 6154ea: Radeon display error - display driver stopped responding and has recovered

  Received a UN expected error in the web search, actully screen off for a few seconds before receiving an error on the display driver stopped responding and recovery.

  Took a glance in the peripheral section where the 2nd adapter displays without any sign of error.

  After recently installing a new SDS moving from the HARD drive, reinstall windows 7 etc via the updates and the order to make recovery disc the laptop because I used receive a blue screen error frequently, so that the display driver does not not error occasionally when using the design programs.  Therefore assumed, needed a new HDD/SSD and factory restore.

  -Laptop computer has been cleaned withdrawal because keyboard, frame etc. with solvents as a cleaner. Therefore cannot be over heating the fan works hard to due and SSD.

  -Power supply has been connected to the time

  N ' was not overclocked as it is when using disk HARD aswell

  It wasn't until today where it happened again, without the blue screen though. So decided I would look at him and realized it is a common problem with the ATI drivers, when I assumed it was a HARD drive failure all along.

  This time the screen turned off for a few seconds, more then previously which is a little disturbing. Was only using a search engine with no program in the background. Infact havn't got round to reinstall files and software so the laptop is very clean and basic and works so don't know why I feel this fast.

  Need to know your opinion on this please, may not know... (Radeon HD 6490M)

  Thank you

  Hi @skibbles,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion dv7-6154ea Entertainment Notebook and problems with the display driver stopped responding. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. This resets the hardware parameters and contributed to others.

  Here is a link to test the material if you need it. It checks the pieces to see if something is a failure.

  Please let me know how it goes.

  Thank you.

• error display problem

  trying to get rid of this error as follows
  Portrait Displays software {WPCTRL95} error
  Cannot find the file for translation:
  C:\Portrait Displays Software\pivot.ini
  [WPCTRL95] will not run.
  This appeared after uo hanging a flat panel HDMi HP w2207h widescreen monitor

  answer is here:

  http://filetonic.com/blog/2008/10/08/pivot-ini-error/

• I constantly get a message error display driver has stopped working and has recovered.

  I have my getting an error message display driver atikmdag stopped responding and has successfully recovered.  Just typing this screen deleted three times!  What should I do?  I have an AMD processor and Windows Vista Home.

  Hello

  See this article which has a Fix - it:

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/2665946

  Also check with Support ATI, their drivers and documentation online and ask in their forums
  on known problems. You should perhaps update the video driver or re - install the same as
  If it is more recent. It is sometimes necessary to return to an older stable version.

  Drivers and Support ATI
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers - use the Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  AMD/ATI Forums
  http://forums.AMD.com/game/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• WOW/graphics error "display driver nvlddmkm stopped responding and was retrieved successfully."

  Help, please. On the next computer I have terrible crash problems while playing WoW. Critical error WOW States: "not enough memory to process command - 11 538 bytes requested."

  When running 3D Mark Vantage I can reproduce the "display driver nvlddmkm stopped responding and was recovered successfully.

  Processor Intel Core i7 CPU 920 @ 2.67GHz
  Details of the component
  NVIDIA GeForce GTX 295 graphics
  4 095 MB total graphics memory available graphic set
  Main hard drive 53GB free (140 GB Total)
  64 bit version with service PAC 2 Vista Ultamate

  Forums are full of posters indicating that it is a Vista / Nvidea incompatibility problem that has been around for years and that the problem is not treated. I tried everything I can think of, check the RAM to download new drivers, to the removal of unnecessary records of WOW. I reinstalled everything, run each diagnostic tool in the plane, patches downloaded, checked for the virus and still no help.

  I am currently able to play WOW on the smaller graphics settings and avoid cities. With this level of equipment, it's a shame, really, I should be able to do more.

  Did anyone have any suggestions of what I can do at this point?

  OK, I did a lot of research on this issue.  The problem lies in the Blizzard, most of the time.

  World of Warcraft is a set of 32 bits.  Because it is strictly 32 bit, it only has access to 2 gigabytes of memory.  Windows manages the other 2 giga of addressable space.

  Most of the developers of games flag their games before the compile time to use larger amounts of memory.  Blizzard doesn't do this, because their anti-cheat system and third-party tools rely on the 32-bit addressing and address 64-bit would mean that they must all be rewritten.

  What happens in the game, is that your footprint large capacity memory card is mapped in the game.  In general, it is when your settings are high, because it uses the most memory, which explains why the game is playable when you use minimal settings.  Given that the configuration of your particular graphics card uses close to 2 gig of RAM itself, quickly force you the game short of memory addressable space.

  To resolve this problem, you may be able to play with reduced settings.  Reduce your resolution is usually the best way to limit the use of memory, since it increases exponential use RAM when you increase the resolution.  You might have to play with different parameters.  You can open the upward Task Manager and monitor the use of your memory WoW game to see where the sweet spot is maintaining your memory under control.

  Blizzard will have to make the difficult choice to eventually allow access extended memory.  More people are buying equipment like yours, this problem will be more widespread.

• PS6110 error display critical, but there is nothing wrong?

  Hi all

  I have a PS6110 who had a flat battery on the controller.

  I swapped the controller and everything is now displayed as OK.

  But the picture is still saying critical error.

  

  View state:

  

  And these are the last event logs:

  

  What I need to erase any what status?

  Everything seems to work very well.

  Thank you

  Hello

  I believe that this issue is resolved in the current firmware, the solution is to connect the passive controller serial and deliver a reboot.   Alternatively, you can remove the passive CM and wait one minute, then re - insert.   Either must clear the error condition.

  Kind regards

  Don

• Error display (from different threads)

  Hello

  I have a program that downloads an xml file.

  An error is encountered when I by specifying a non-existent URL in the Http connector (in order to produce an error).  I want to display the error on a pop-up message, however, the Simulator gives me an error when I try to view the message.

  My code looks like this (short form):

  1.  A Button Pressed
  2.  Connection thread executed
  
  ...
  
  private class Search extends Thread {
    public Search() {
      super();
    }
  
    public void run() {
  
       try {
       ...
       code for downloading and parsing file -- works just fine
       ...
       } catch (Exception e) {
  String error = e.toString();
  System.out.println(e.toString());
  
  //remove the currently displayed "Please wait..." PopupScreen
  synchronized (UiApplication.getEventLock()) {
  UiApplication.getUiApplication().popScreen(
  UiApplication.getUiApplication().getActiveScreen());
                  }
  
  //display a new screen with the error               UiApplication.getUiApplication().pushScreen( new WaitScreen(error));
  }
  

  An error is thrown in the last line "UiApplication.getUiApplication () .pushScreen (new WaitScreen (error));'.  I know this because when the line is removed, the program works fine (except for the fact that the file is not downloaded).

  When the URL does exist, there is no problem - the file is downloaded and the program does what I want it to do.  So, the problem is when I try to view a popup that says details about the error.

  Someone has any ideas why this might be the case?

  Thank you!

  UiApplication.getUiApplication().invokeLater(new Runnable()
     public void run() {
  
  Status.show(error, 2000);
                 }
  });
  

  Found a solution to my problem:

  I was not correctly process the son.

• ISE 1.1 error displaying the home page when looking on the secondary node

  Hello

  I made an ISE installation with a primary and a secondary node - basically, it works very well.

  My problem is when looking on the secondary node e I get a certificate error which pointing to this page looking for the browser gets information from the primary node that makes the browser do not to display info. On the primary, it works fine.

  First I used self-sign certificates, subsequently I installed certificates frm the local certification authority - the problem remained the same.

  I tried with IE, Firefox and Chrome.

  When you change the primary/secondary role, the problem always moved to the real secondary node.

  Anyone an idea what to do here?

  Andreas

  If you use self CERT signed, you must connect to the node seconeary, once you trust cert, you'll be able to see everything on the head node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Help with error: "display driver stopped responding, but recovered."

  Hello

  First of all, my configuration is a Dell XPS 7100, Windows 7 Home Premium 64-bit, the Videocard Visiontek AMD Radeon HD 6850 w / 9.2.0.0 driver version.

  AMD Phenom II X 6 cpu.

  My problem is that when I try to play a game (more precisely: Minecraft, SimCity, World in Conflict, AOE3) under Windows, the screen freezes for 5 seconds then go black for 1 second then back to the top with an error message saying:

  Display driver stopped responding, but recovered

  Driver AMD display driver stopped responding and has successfully recovered.

  This started only after I upgraded my video card to an AMD HD 5670 to an AMD Radeon HD 6850 Visiontek, which, at the same time, I upgraded my power supply to a 500w unit as AMD recommends. After that that I've updated all my drivers, deleted and reinstalled the driver video and which did not help. I then searched in all the forums about this problem and found that it is more than likely a problem with Windows power management. So, I followed the instructions on the site to change the registry data to help with this. This did not work, the same problem at the same time. I then contacted AMD Support and fairly well, they told me that it is either the power supply or windows power management which was the cause of the crash.

  I am at a loss now, I know not what to do. I have not tried all the third-party programs to try to manage the power. But if someone has used one that works or has any ideas for me to try please let me know.

  Thank you very much!

  I found a solution that helps!

  Please make a backup of the registry before making any changes in it.

  When editing the registry go to:

  • HKEY_LOCAL_MACHINE
  • then the MATERIAL
  • then DEVICEMAP
  • then the VIDEO
  • in the 'VIDEO' file, there is an entry with the title: MaxObjectNumber - REG_DWORD
  • This has a value at the end that looks like 0 x 00000006 (6) or 0 x 00000005 (5)
  • Double-click MaxObjectNumber, and an edit box appears
  • put 0 in the given value, and then click OK.

  This will disable Windows GPU Timeout detection and recovery. That she has stopped crashing on me.  The only problem is that windows does not save it and it resets after that rebooting so it must be changed every time you start the computer.

  If anyone knows how to save the changes to the registry, I would be very grateful for your advice.