Similar Questions

• I have a file on my computer which is not allowing me access because he says that I have no rights of the file even if I'm an admin, how can I get rid of him?

  A random file popped into my computer and is secure. It keeps tellin me I do not have the rights to open it, but when I change the rights an error comes saying that access was denied. I don't know what it is and how to get rid of? to tell you the truth, it seems good to suspects and for all I know a virus. If it helps, I am the administrator and it says I have all rights to the computer, so it's really weird.

  Hello

  a file name is always useful when you post here

  You can try this to remove it, if it not a system file.

  http://www.Malwarebytes.org/products/FileASSASSIN

• I can't open attachments ._DOC. I tried combining write, wordpad and othereswith without success. I refused access to iexpl because of security settings. I have no WORD from the Office of M. advice?

  I can't open attachments ._DOC. I tried combining write, wordpad and others without success. I refused access to iexpl because of security settings. I have no WORD from the Office of M. advice?

  You must change the extension of the name of _DOC in just DOC. Then you will need a program to open the file; the free Word Viewer, as well as a compatibility pack, if needed, should do the job. How to obtain the latest Word Viewer

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions

• Another problem with the configuration of Cisco VPN Client access VPN Site2site

  We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site.  JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support.  So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0

  Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.

  CORP netowrk 192.168.1.0

  IP VPN 192.168.12.0 pool

  Colo 10.1.0.0 internal ip address

  Also, here's an example of my config ASA

  : Saved

  :

  ASA Version 8.2 (1)

  !

  hostname lwchsasa

  names of

  name 10.1.0.1 colo

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  backup interface Vlan12

  nameif outside_pri

  security-level 0

  IP 64.20.30.170 255.255.255.248

  !

  interface Vlan12

  nameif backup

  security-level 0

  IP 173.165.159.241 255.255.255.248

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  switchport access vlan 12

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group network NY

  object-network 192.168.100.0 255.255.255.0

  BSRO-3387 tcp service object-group

  port-object eq 3387

  BSRO-3388 tcp service object-group

  port-object eq 3388

  BSRO-3389 tcp service object-group

  EQ port 3389 object

  object-group service tcp OpenAtrium

  port-object eq 8100

  object-group service Proxy tcp

  port-object eq 982

  VOIP10K - 20K udp service object-group

  10000 20000 object-port Beach

  the clientvpn object-group network

  object-network 192.168.12.0 255.255.255.0

  APEX-SSL tcp service object-group

  Description of Apex Dashboard Service

  port-object eq 8586

  object-group network CHS-Colo

  object-network 10.1.0.0 255.255.255.0

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.1.0 255.255.255.0

  host of the object-Network 64.20.30.170

  object-group service DM_INLINE_SERVICE_1

  the purpose of the ip service

  ICMP service object

  service-object icmp traceroute

  the purpose of the service tcp - udp eq www

  the tcp eq ftp service object

  the purpose of the tcp eq ftp service - data

  the eq sqlnet tcp service object

  EQ-ssh tcp service object

  the purpose of the service udp eq www

  the eq tftp udp service object

  object-group service DM_INLINE_SERVICE_2

  the purpose of the ip service

  ICMP service object

  EQ-ssh tcp service object

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0

  outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq www

  outside_pri_access_in list extended access permit tcp any outside_pri eq https interface

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100

  outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface

  outside_pri_access_in list extended access permit icmp any any echo response

  outside_pri_access_in list extended access permit icmp any any source-quench

  outside_pri_access_in list extended access allow all unreachable icmp

  outside_pri_access_in list extended access permit icmp any one time exceed

  outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586

  levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

  levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0

  outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0

  outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0

  outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0

  Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list

  OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0

  L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  exploitation forest asdm warnings

  record of the rate-limit unlimited level 4

  destination of exports flow inside 192.168.1.1 2055

  timeout-rate flow-export model 1

  Within 1500 MTU

  outside_pri MTU 1500

  backup of MTU 1500

  local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 100 burst-size 5

  ICMP allow any inside

  ICMP allow any outside_pri

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  interface of global (outside_pri) 1

  Global 1 interface (backup)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside_pri) 0-list of access OUTSIDE-NAT0

  backup_nat0_outbound (backup) NAT 0 access list

  static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns

  static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns

  Access-group outside_pri_access_in in the outside_pri interface

  Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1

  Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254

  Timeout xlate 03:00

  Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  the ssh LOCAL console AAA authentication

  http server enable 981

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outside_pri

  http 0.0.0.0 0.0.0.0 backup

  SNMP server group Authentication_Only v3 auth

  SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt connection tcpmss 1200

  monitor SLA 123

  type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri

  Annex ALS life monitor 123 to always start-time now

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto ipsec df - bit clear-df outside_pri

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto outside_pri_map 1 match address outside_pri_1_cryptomap

  card crypto outside_pri_map 1 set pfs

  peer set card crypto outside_pri_map 1 50.75.217.246

  card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5

  card crypto outside_pri_map 2 match address outside_pri_cryptomap

  peer set card crypto outside_pri_map 2 216.59.44.220

  card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  86400 seconds, duration of life card crypto outside_pri_map 2 set security-association

  card crypto outside_pri_map 3 match address outside_pri_cryptomap_1

  peer set card crypto outside_pri_map 3 216.59.44.220

  outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  card crypto outside_pri_map interface outside_pri

  crypto isakmp identity address

  ISAKMP crypto enable outside_pri

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 10

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  !

  track 1 rtr 123 accessibility

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  management-access inside

  dhcpd auto_config outside_pri

  !

  dhcpd address 192.168.1.51 - 192.168.1.245 inside

  dhcpd dns 8.8.8.8 8.8.4.4 interface inside

  rental contract interface 86400 dhcpd inside

  dhcpd field LM inside interface

  dhcpd allow inside

  !

  a basic threat threat detection

  statistical threat detection port

  Statistical threat detection Protocol

  Statistics-list of access threat detection

  a statistical threat detection host number rate 2

  no statistical threat detection tcp-interception

  WebVPN

  port 980

  allow inside

  Select outside_pri

  enable SVC

  attributes of Group Policy DfltGrpPolicy

  VPN-idle-timeout no

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  internal GroupPolicy2 group strategy

  attributes of Group Policy GroupPolicy2

  Protocol-tunnel-VPN IPSec svc

  internal levelwingVPN group policy

  attributes of the strategy of group levelwingVPN

  Protocol-tunnel-VPN IPSec svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl

  username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard

  aard attribute username

  VPN-group-policy levelwingVPN

  type of remote access service

  rcossentino 4UpCXRA6T2ysRRdE encrypted password username

  username rcossentino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  bcherok evwBWqKKwrlABAUp encrypted password username

  username bcherok attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username

  rscott username attributes

  VPN-group-policy levelwingVPN

  sryan 47u/nJvfm6kprQDs password encrypted username

  sryan username attributes

  VPN-group-policy levelwingVPN

  type of nas-prompt service

  username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0

  username cbruch attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  apellegrino yy2aM21dV/11h7fR password encrypted username

  username apellegrino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5

  username rtuttle attributes

  VPN-group-policy levelwingVPN

  username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin

  username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0

  username nbrothers attributes

  VPN-group-policy levelwingVPN

  clong z.yb0Oc09oP3/mXV encrypted password username

  clong attributes username

  VPN-group-policy levelwingVPN

  type of remote access service

  username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0

  username attributes finance

  VPN-group-policy levelwingVPN

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  type of remote access service

  IPSec-attributes tunnel-group DefaultL2LGroup

  Disable ISAKMP keepalive

  tunnel-group 50.75.217.246 type ipsec-l2l

  IPSec-attributes tunnel-group 50.75.217.246

  pre-shared-key *.

  Disable ISAKMP keepalive

  type tunnel-group levelwingVPN remote access

  tunnel-group levelwingVPN General-attributes

  address LVCHSVPN pool

  Group Policy - by default-levelwingVPN

  levelwingVPN group of tunnel ipsec-attributes

  pre-shared-key *.

  tunnel-group 216.59.44.221 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.221

  pre-shared-key *.

  tunnel-group 216.59.44.220 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.220

  pre-shared-key *.

  Disable ISAKMP keepalive

  !

  !

  !

  Policy-map global_policy

  !

  context of prompt hostname

  Cryptochecksum:ed7f4451c98151b759d24a7d4387935b

  : end

  Hello

  It seems to me that you've covered most of the things.

  You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel

  outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo

  Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.

  -Jouni

• VPN site to Site with client access VPN

  I have a pix 500 series configured with access to the VPN client. When I set up a site to site vpn to a remote location, access to the customer no longer works. If I remove the vpn site to site, the vpn client works again. I tried the MDP and the CLI. Someone could look at my config and let me know what I'm missing. See the two configs attached.

  Thank you

  Lost in VPN

  Ah, I missed that. You can change the States of card crypto for virtual private networks to be on the same card encryption like this...

  mymap 20 ipsec-isakmp crypto map

  card crypto mymap 20 match address ipsecvpn

  card crypto mymap 20 peers set xxx.xxx.100.180

  transform-set set mymap 20 sha - crypto card game

  map mymap 65535-isakmp ipsec crypto dynamic outside_dyn_map

  client card crypto mymap RADIUS authentication

  mymap outside crypto map interface

  or

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address ipsecvpn

  card crypto outside_map 20 peers set xxx.xxx.100.180

  transform-set set sha - game card crypto outside_map 20

  map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map the RADIUS client authentication card crypto

  outside_map interface card crypto outside

• Client access VPN from Cisco 876 does not work

  Hello

  I have the router Cisco 876 (with 12.4 (4) T2 IOS) and Cisco VPN client worm. 4.6.02).

  I am trying to configure my router as a VPN concentrator for 2 groups, but the implementation of tunnel fails already with the negotiation of parameters. Please find attached config and the «debug crypto isakmp» output Ethereal trace is also included (the customer has to IP: 172.24.4.61, interface of routers is 172.24.34.67).

  I tried to downgrade to IOS and changed the platform at 2821, but with the same result.

  Let me know if you can see the problem.

  Thank you!

  Lubomir

  C876 config:

  votre_nom #sh run

  Building configuration...

  Current configuration: 2457 bytes

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  hostname yourname

  !

  boot-start-marker

  boot-end-marker

  !

  logging buffered 51200 warnings

  !

  AAA new-model

  !

  !

  Konzola AAA authentication login no

  local VPN_access AAA authentication login

  local VPN_access AAA authorization network

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  IP subnet zero

  IP cef

  !

  !

  !

  !

  no ip domain search

  !

  !

  !

  username privilege 15 secret xxxx cisco

  !

  !

  !

  crypto ISAKMP client configuration USERS group

  two key

  pool USERS_pool

  !

  Configuration group customer crypto isakmp ADMIN

  a key

  pool ADMIN_pool

  Crypto isakmp USERS_Profile profile

  Group USERS of identity match

  list of authentication of client VPN_access

  VPN_access of ISAKMP authorization list.

  initiate client configuration address

  client configuration address respond

  Crypto isakmp ADMIN_Profile profile

  Group of ADMIN identity match

  list of authentication of client VPN_access

  VPN_access of ISAKMP authorization list.

  initiate client configuration address

  client configuration address respond

  !

  !

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  !

  crypto dynamic-map ADMIN 1

  game of transformation-ESP-3DES-MD5

  ADMIN_Profile Set isakmp-profile

  market arriere-route

  !

  crypto dynamic-map USERS 1

  game of transformation-ESP-3DES-MD5

  USERS_Profile Set isakmp-profile

  market arriere-route

  !

  !

  map VPN_Pristup 1-isakmp dynamic ipsec ADMIN crypto

  card crypto VPN_Pristup 2-isakmp dynamic ipsec USERS

  !

  !

  !

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  !

  ATM0 interface

  no ip address

  Shutdown

  No atm ilmi-keepalive

  DSL-automatic operation mode

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface Vlan1

  IP 172.24.34.67 255.255.255.0

  IP tcp adjust-mss 1452

  card crypto VPN_Pristup

  !

  IP pool local USERS_pool 10.1.1.10 10.1.1.20 USERS group

  IP pool local ADMIN_pool 10.2.1.10 10.2.1.20 group ADMIN

  IP classless

  IP route 0.0.0.0 0.0.0.0 172.24.34.1

  !

  !

  IP http server

  local IP http authentication

  IP http secure server

  IP http timeout policy slowed 5 life 86400 request 10000

  !

  not run cdp

  !

  !

  control plan

  !

  !

  Line con 0

  authentication of the connection Konzola

  no activation of the modem

  line to 0

  line vty 0 4

  privilege level 15

  transport input telnet ssh

  line vty 5 15

  privilege level 15

  transport input telnet ssh

  !

  max-task-time 5000 Planner

  end

  votre_nom #.

  votre_nom #.

  Hello

  where is isakmp policy commands crypto. In short, you have not configured the phase 1...

  * 06:07:20.347 Mar 1: ISAKMP: (0): atts are not acceptable. Next payload is 0

  * 06:07:20.351 Mar 1: ISAKMP: (0): no offer is accepted!

  * 1 Mar 06:07:20.351: ISAKMP: (0): phase 1 SA policy is not acceptable! (local 172.24.34.67 remote 172.24.4.61)

  http://www.Cisco.com/en/us/partner/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

  Vikas

• I need help! "An access denied error was returned while attempting to change a service. You may need to log on using an administrator account to perform changes specifice. »

  This is the message I get trying to disable my system startup items Configuration utility. I never had this problem before. I don't have my account and a guest account.

  I need help! Thank you

  A common cause of this is a spyware, Trojan horse or other parasite which means it's time to analyze for all these items. Be sure to include free AVG AntiSpyware in the analysis.

  Then, when you have a clear idea, there are no parasites try TWEAKUI and set the account you want to auto logon.

  Good luck! Please rate me upward if you find my post helpful. Thank you!

• "This connection is Untrusted" appears when you try to access all sites on MacBook Pro; problem started after running Avast scan of the computer

  I ran the full scan of the disc of Avast. Since then, I have been unable to access any site using Firefox without getting the message, "this connection is not approved." Many are the sites I have been too many times before, and they are trusted sites. I don't know if there is a problem with Firefox or Firefox could recover place a sort of new "infestation". The Avast scan resulted in 5 put files in a quarantine area. Eleven years could not be scanned. Thanks for any help you can provide!

  I guess Safari normally works on these sites?

  The latest version of avast! Web Shield includes a function to filter your Internet connections for potential threats. In order to filter secure sites, it must present a certificate of 'false' for the site in Firefox, so it can be 'in the middle' and read your secure communications. If Firefox is not set false certificates of trust, then you will get warnings for all secure sites.

  You can disable this feature as a test to see if the problem goes away.

  If this works, but you want to use the feature, you must import the certificate of Avast in the tab "References" of Firefox so Firefox accepts its false certificates (there might be an automated way AVAST to do this for you, or you might need export from IE and then import them into Firefox).

  Here is an exchange of views on avast! "forum of s on the way in which this is supposed to work: problems and questions about HTTPS scanning - Avast Internet 2015

• I set up the new user on my MacBook Pro with the parental control, and I want to allow access to Word, Excel, PowerPoint for Mac.  I have those checked in the dialog box list, but they may not appear in its applications. Am I missing something?

  I set up a 'user' for my son and use parental controls.  I want to him to have access to Word for Mac, and it appears in the list of applications I can check to allow use for.  However, when we opened a session under his username, these applications do not seem to be anywhere.  When you configure new users, applications such as Word for Mac or the available Pages on users?  I can't find any information to help in this regard.  I don't know if I'm missing something under user put up, or parental controls, or both.  Any help would be greatly appreciated!

  These requests should be made available, provided you installed then in the folder/applications, not in a private folder ~/Applications for a specific user.

• I can't access my computer downloads. You will need to enter into the computer.

  Page of Mozilla takes all the space in the window. I can't have my tab stop or the list of programs. I don't think I did. Don't know how it happened either.

  Don't worry; You can fix Quick. He may be because firefox launched full screen mode
  Mode full-screen:

  The F11 key activates / deactivates the Mode full screen on and outside
  ALT + V + F will toggle Mode full screen on and outside
  Move your cursor to the top edge of the screen, right click in the empty box on one of the toolbars that slide down and choose "exit full screen".
  Press the ALT or F10 key to temporarily show the Menu bar and click View > full screen to check or uncheck (checked = Mode full screen on;) UN - check = Full Screen Mode off)
  See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If this answer solved your problem, please click 'Solved It' next to this response when logged in on the forum.

• How can I put a lock on my computer during startup? whenever I log in I want to put a password to start the computer

  How to set up a password, connect to the computer?

  Hello

  See the following site:

  How to create and configure user accounts in Windows XP

  http://support.microsoft.com/kb/279783.