Error e/s file not trapped by the event listener

Does not appear that the file IO error is trapped by the IOErrorEvent.IO_ERROR event

as described in the documentation and the examples I looked at.

My test code is listed below - if there is no such thing as drive P generates a file IO error (#2038)

which it should - but it doesn't. "t get trapped in the event file.

Here's the code for simple test attached to a button

public function btnSubmitSafetySheet_clickHandler(event:MouseEvent):void
    var pdfFilter:FileFilter = new FileFilter("PDF Files", "*.pdf");                
 
    var tmpPDF:File = File.documentsDirectory.resolvePath("rpt_RegionalManagers.pdf");
    var copyToMissingFolder:File = new File();
 
    copyToMissingFolder.nativePath = ("P:/safety/Initials-DDMMYYYY-SafetySheet.PDF");   
    trace(copyToMissingFolder.nativePath);
    if (copyToMissingFolder.exists) {
        trace('MissingFolder exists');
    }
    else {
        trace('MissingFolder DOES NOT exist');
    }
 
    tmpPDF.addEventListener(IOErrorEvent.IO_ERROR, pdfCopyError) 
    tmpPDF.copyTo(copyToMissingFolder, true);                       // Should Generate I/O Error if P: not available                                       
    trace('copied to missing docs folder');
 
}
 
private function pdfCopyError(evt:IOErrorEvent):void {
    trace('PDF Copy From Network Error');
    trace('Error Message: ' + evt.text);
    removeFileListeners();
}
 

None of the trace messages of the IOErrorevent - just debugging and error function:

P:\safety\Initials-DDMMYYYY-SafetySheet.PDF

MissingFolder DO NOT exist

Error: Error #2038: file IO error.

to flash.filesystem::File/copyTo()

Hello

There are two different things-

1 IOError

2 IOErrorEvent

Errors (including IOError) is thrown synchronously and must be captured using the try/catch statements. Infact, the copyTo method documentation indicates clearly that he thorows IOError, so you should use it inside try / catch statement to intercept him.

Events (including IOErrorEvent) are raised asynchronously, for operations that are performed asynchronously. For example copyToAsync method, such as documented, can cause ioError events and generation of complete. Where as copyTo method does not all events (once already documented).

Tags: Adobe AIR

Similar Questions

  • Error opening a VI (LabVIEW: unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid.) The file could not be loaded)

    Hi all!

    Yesterday, I worked all day in a VI and today, unfortunately, I'm frustrated when I tried to open it. Received the following error message:

    LABVIEW: Unable to load dynamic library due to lack of external symbols or dependencies, or a format file not valid. The "ENG633 v1.vi" file could not be loaded.

    This message repeats when I try else open a Subvi.

    Step by step:

    1. I created a copy of the LabVIEW VI example: "FuzzyEx Tanks with control of PI." I kept the copy in the same original directory.

    2 - I have edited the copy, created Subvi etc.

    3 - once I finished my course of programming I closed all the cut (ctrl-x) files and copied (ctrl v) into the other folder.

    4. then I tried to open the next day and... bug! I just couldn't do

    What can I do to open/recover the VI?

    I am using 32-bit LabVIEW 2016 in a Windows 10

    I tried opening them and got the same error you did, so I them opened with a hex editor to see if there was something in the file, and there is literally nothing other than the value of 0x00 for the entire file.

  • Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

    Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

    Hi FRANKGRIMES_945,

    What is the model of your computer?

    (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

    (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

    Error message: "Windows did not start because of a configuration of the disk of the computer problem.

    Hope the helps of information.
    Please post back and we do know.

  • I have error msikhd32.dll file not found on startup, how to solve this problem?

    msikhd32.dll

    There was a problem starting msikdh32.dll
    The specified could not be found.

    Hi Vipul,

    Thank you for the question to Microsoft Community. I'll give my best to help you.

    From your problem description, I understand that you receive error msikhd32.dll file not found when starting.

    To better understand the issue, answer the following questions.

    You did changes to the computer before the show?

    You can perform the methods suggested below and check if they will help you solve the problem.

    Method 1: Perform the clean boot, check if you receive the message.

    To do this, follow the steps in this link:

    http://support.Microsoft.com/kb/929135

    NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

    Method 2: perform the complete analysis of a computer by using the Microsoft Safety Scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    If the problem persists, or if you want more help respond us. We are happy to help you.

  • Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

    Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • files not found in the clouds.

    Apparently there is no way of contacting Adobe on a problem - at least by telephone, dear to the United Kingdom.

    Cannot download my files to the cloud, even if they appear in my account. error message says 'file not found' regardless of the file - new or used.

    Any help would be grateful.

    Hi londonmet1,

    Welcome to the Adobe Forum!

    There is a planned maintenanace announced as directed by the Adobe customer service.

    Please go through this:http://forums.adobe.com/message/6004766#6004766

    You can visiti this page also:

    http://helpx.Adobe.com/creative-cloud/KB/arent-my-files-syncing.html

    Hope this helps you.

    Kind regards

    Baudier

  • ITMS-9000 ERROR: "this set is not valid. The CFBundleVersion key value...

    Hello

    I tried to submit the app store my V27 revision (1.0.5) instead of V28 (1.0.2) for Ipad 1 compatibility but I get this error:

    ITMS-9000 ERROR: "this set is not valid. The value of [3.2.4.6.88575] CFBundleVersion key in the file Info.plist must contain a newer version than the version previously downloaded [3.3.1.3.8

    How I change the CFBundleVersion?

    Thank you

    Support DPS can however help you. Please log in to your dashboard DPS https://digitalpublishing.acrobat.com/SignIn.html and you will find the coordinates at the bottom of the page

  • Error (10,47): EntryFlowPageCO not found in the oracle.apps.ap.oie.entry class.

    Hi all

    I extended a CO named IndusFinalReviewPageCOXX and I got the following error.

    Error (10,47): EntryFlowPageCO not found in the class oracle.apps.ap.oie.entry.summary.webui.FinalReviewPageCO in the indus.oracle.apps.ap.oie.entry.summary.webui.IndusFinalReviewPageCOXX class.


    I already drag the EntryFlowPageCO class file in the path myclasses\oracle\apps\ap\oie\entry\summary\webui
    and import the file. but the error remains the same... After that, I compile the EntryFlowPageCO class file and found a CO EntryFlowPageCO imports more. I drag the class of this CO also file in the appropriate path... But still the same error.

    Please give me the solution as soon as POSSIBLE.

    Thank you
    Amit Jaitly

    Amit,

    In the standard central, you can check this controller as entryflowpageco is not under myclasses\oracle\apps\ap\oie\entry\summary\webui.

    Its under oracle/apps/ap/goose/entry/webui put the same under this directory structure.

    Kind regards
    GYAN

  • Error iTunes - iTunes could not connect to the store purchases - if you have any firewall software, make sure it has been set to allow communication on port 443.

    My itunes has been fine. All of a sudden today it now gives me this error: error Itunes - iTunes could not connect to the store purchases - if you have a software firewall, make sure that it has been set to allow communication on port 443.

    I do not have my firewall active. I connected to itunes, quit itunes, reconnected - still a problem.

    Was there an update and now it's a bug? Help!

    Thank you!

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

    Internet, not able to browse computers on the network

    The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

    I'm puzzled.

    Hello

    I suggest you to send your request in the below link.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  • OfficeJet6500A more - ePrint Setup error - this printer could not connect to the server

    My 6500 a is connected to the internet and I am able to print wireless.

    When you try to set up ePrint, I go through the following menu path: installing, configuring Web services, the printer email address.

    I get the message error "this printer could not connect to the server.

    I have read and tried the others 'solutions' on the plate that involved turning market eprint, crossing out-lit power cycles, turning wireless on and outside, turning on the printer and wait 5 minutes, restoration of factory settings...   Nothing works.

    Any ideas?

    From one day to the next it printed the ePrint address, so I guess that the problem was with the HP sever.

  • Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

    Wireless connections

    I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

    Hello

    I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

    You can also try the following methods and check if it helps.

    Method 1:

    Update a network adapter driver.

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 2:

    Troubleshoot network adapter problems.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  • EqualLogic group member network configuration error: "management interface should not be on the san subnet.

    Hello

    We currently have new EqualLogic 6100 device with this network configuration:

    Director of the IP - 192.168.0.2 (VLAN1).

    Member network config:
    eth0 - 192.168.0.3 (VLAN1)
    eth1 - 10.10.10.3 (VLAN2)
    eth2 - 10.10.10.4 (VLAN2)
    eth3 - 10.10.10.5 (VLAN2)
    ETH4 - empty

    I would attribute 192.168.0.4 to eth4, but received the error: "management interface should not be on the san subnet.

    I am sure that all interfaces eth has access to the VLAN1 and VLAN2, mean error indicates that eth4 should not access VLAN2 and only access the VLAN1 on the switch?

    Or eth0 should also have access to the VLAN2 only to reconfigure eth0 and eth4?

    Thank you

    > The group eating IP should be in iscsi VLANS?

    Yes!

    Note: If configure you an EQL it will ask an iSCSI port because nothing is more necessary to bring it up. The doest previous EQLs have a dedicated Mgmt Port and later, you can convert the last ethX as a MGMT port. This is the reason why configure you ISCSI at the beginning. (Think of a mixed group of newer and older models, and you get a picture)

    OK... once again it is the one and only member of the Group and there is making the production host connected to the right?

    The change of IP address, to a 3rd. subnet for temporary use.

    -Do not touch eth0-3 and the IP address of the group now

    -Configure the MGMT port and IP address management in the tempr group. Subnet. Use the Config-> Adv. Group-> network MGMT. You can change the MGMT Port of the Member, and the address IP of MGMT

    -For the registration of the configuration, you will lose access. You must place your admin PC in the templ. subnet so

    -Connect to the GroupMgr with temp again. INTELLECTUAL PROPERTY

    -Now you can change the IP address of group 10.10.10..x

    -Now you can change eth0 10.10.10.2

    -At the end, you can change the address IP of the Group MANAGEMENT, as well as the MGMT Port to 192.168.0.x

    -Change the IP address of your admin PC rear

    A failover, you should consider to hang a serial cable the active controller of the EQL. Use 9600,8,1, N with your favorite terminal program (putty.exe on windows). All the steps, you can perform from the command line.

    If this group and the only member not in production, but you can reset the config and restart from the beginning.

    Kind regards

    Joerg

  • The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file.


    I moved a listener on a host in a House different oracle. The headset works fine, but EM 12 c shows that the listener is down with the following summary:

    The listener is down: even if a listener with the name "AUDITOR", is running on this host at the port: "1521", it has not started using "the target LISTENER. ORA file. CORRECTIVE ACTION: To monitor this "EM listener target" with its current configuration, you must stop the process of listening running and start it using the Listener parameter file: opt/oracle/product/12.1.0.2/network/admin/listener.ora. Alternatively, you can update "this target LISTENER. Location ORA setting"with the location of the listener running, which started using the: opt/oracle/product/11.2.0.3/network/admin/listener.ora.

    EM 11 g, I simply changed the configuration of the listener for the different oracle home, argued the change and in a few minutes the listener would show that 'UP' with the oracle of new home. I upgraded to MS 12 c (12.1.0.4) and can't find how to do this. Can someone give me the procedure.

    Thank you

    Ron

    Hi Ron,

    Can you please do the following?

    -Create a for the listener listener.ora file, stop and start the receiver using the listener.ora file. If the file is located in a default location, set the TNS_ADMIN environment variable to that location before you start the listener.

    -Log on to the EM console, go to the homepage of the listener.

    -In the Oracle Listener menu, select target Configuration > Configuration of the analysis.

    -Ensure that the parameters, including the Listener.ora directory, are properly.

    Kind regards

    -Loc

  • My photoshop will not update, it gives me an error code that is not listed.  The error code is U44M1P34

    I tried several times now to do the last update for the application of CC of Photoshop 2015, it will not install.  It gives me an error code that is not listed in the list that I found in the help section.  I hope that someone else has had this problem and knows what it is before I have to call and find someone who can give me only one I can't answer.

    Please check: U44M1P34 error message

Maybe you are looking for