Error (10,47): EntryFlowPageCO not found in the oracle.apps.ap.oie.entry class.

Similar Questions

• Installation of Oracle 11 g on windows, error: specified home was not found in the registry

  Hi gurus,

  I installed 11 GR 2 on windows server 2012, due to certain constraints I uninstalled the software of oracle 11 g,

  again I tried to install 11 GR 2, but got error like "ORA-12543: TNS:destination unreachable host"

  After getting this error, I removed all the registers of the oracle. now try to install oracle 11 g 2.

  After 88% am getting error "shown at the reception was not found in the registry.

  Thanks in advance.

  Thanks and greetings

  REDA

  If you want to re-evaluate 11.2.0.4, you will need a support contract paying since 11.2.0.4 is available on MOS.

  The other option would be to install 12cR1 - tasks of preinstallation of Oracle databases - which is available at Oracle Database Software Downloads | Oracle Technology Network | Oracle

  For other options, pl contact your Oracle sales team

• ACS 5.2 error 22056 object was not found in the identity applicable store (s)

  Hi, I have two ACS v 5.2 (primary and secondary) and some users are in stor in-house and others are in the ad.

  Local site topology is like this:

  PC - AP - WLC - ACS - AD

  Authentication method is PEAP(EAP-MSCHAPv2), and all users have the company certificate installed. In users of client OS is Windows 7.

  Users worked very well, but some reports disconnections of intranet users. I see in the ACS connect many "22056 object was not found in the identity of the point of sale." and "24415 Active Directory user authentication failed because the user account is locked out" alarms.

  I thought that it was because the user located in the AD of basic data, but sometimes the same user is authenticated successfully and other that I see the "22056..." or "... 24415" alarm signals.

  I changed the primary role for ACS to works as secondary and we see the same alarms.

  I Don t know is a matter of ACS, and how to resolve this...

  Please helpme

  Thank you...

  Hello

  How you are authenticating these users? They are present in the local database of GBA? If so, have you checked the State from inside account to see if the user account is still active and that it is not disabled?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• enableThemes method not found in the oracle.lbs.mapclient.MapViewer class

  Hello
  I would ask about the error I recently.
  I don't know what's wrong with my code, but I '_enableThemes_ method not found in the class oracle.lbs.mapclient.MapViewer' when I tried to apply a theme to my card using the API of Java Bean.
  
  Another method does not recognize mapviewer is '_setAllThemesEnabled_ '.
  
  I don't know how to apply some themes I did for my card despite the use of the method.
  I have already imported oracle.lbs.mapclient.MapViewer.
  
  -----
  Here are my codes:
  
  < % @ page import = "java.util.Enumeration" % > "
  < % @ page import = "java.awt.geom.Point2D" % > "
  < % @ page import = "java.awt.Dimension" % > "
  < % @ page import = "oracle.lbs.mapclient.MapViewer" % > "
  < % @ page import = "oracle.lbs.mapclient.ScaleBarDef" % > "
  
  String mvURL = request.getParameter ("mvurl");
  mvURL = "http://localhost: 8888/mapviewer/omserver";
  
  MapViewer mv = session.getAttribute("gvis_mvhandle") (MapViewer);
  
  Boolean newSession = false;
  
  if(MV==null)
  {
  create a new ID customer mapviewer
  MV = new MapViewer (mvURL);
  mv.setImageFormat (MapViewer.FORMAT_PNG_URL);
  mv.setMapTitle("");
  session.setAttribute ("gvis_mvhandle", mv); keep the handle of the client in the session
  newSession = true;
  }
  
  mv.setDataSourceName ("mvdemo");
  
  String = "#000000" stroke1, fill1 = null, tr1 = null, labelc1 = null, asis1;
  
  int opacity1 = 128;
  
  String style1 = "gvis_" + ("NONE".equals (stroke1)? ". (': stroke1) + "_" +.
  ("NONE".equals (fill1)?" (': fill1) +.
  ((opacity1>0)?) » 128" : « ») ;
  
  String query1_ = "select * from counties;
  
  mv.addJDBCTheme ("peta", "theme1", query1_, null, null,
  Style1, labelc1, '_gvis_style_text_', true);
  
  mv.enableThemes ("THEMENAME");
  
  try {}
  mv.setFullExtent ();
  MV. Run();
  } catch (Exception e) {out.println (e.getMessage ()) ;}}
  
  String url = mv.getGeneratedMapImageURL ();
  
  -----
  
  
  I really appreciate your help...

  Hello
  Make sure that you type the correct setting. EnableThemes method requires an array of strings. Try the following:

  mv.enableThemes (new String() {"THEMENAME"});

• JspServlet was not found in the oracle application

  Hello
  
  When im trying to click on certain responsibilities on oracle application in an exception occurs, the SYSADMIN user
  
  responsibilities
  

  iMeeting responsibility for system monitor
  iProcurement catalog Administration

  do not work
  
  the exceptions are,
  

  Not found
  The requested URL /oa_servlets/oracle.jsp.JspServlet was not found on this server.

  application: 11.5.10.2
  database: 9i
  OS: Linux 4.0
  
  Thank you
  Verhasselt

  Hi Verhasselt;

  Its nice to hear the problem solved ;)

  Please change the thread status reply if it is possible, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• iPad: HP iPrint photo not found on the iTunes App Store

  A HP Web site tells me to use the iPhone App store to download HP iPrint Photo on my iPad.  No results in search for this product on the App Store.  I don't want ePrint, I want iPrint, scan directly to iPad and iPhone.

  Thank you.

  Janet

  Hi, Shlomi,

  In the meantime, I found the all-in-one.  The HP site with out-of-date information can be a U.K. site, too:

  http://WWW8.HP.com/UK/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.HTML?app=TCM:183 - 799204 & platform = tcm:183 - 799197

  Thanks for the quick response!

  Janet O

• error message recurring 573 Ordinal not found in the iertutil.dll library of dynamic links when I try to open some windows.

  error message - 573-Ordinal not found in the dynamic link library iertutil.dll when I try to open some windows. Also when trying to open windows help, says it is not found. Any suggestion is welcome.

  Had the same problem and fixed it. Had tried all ideas that Microsoft had and that they did not fix the problems. I have seen that many peoples problems began after may windows update (mine did at), found two dealing with update to IE9. I uninstalled both and that fixed the problems. The numbers update
  KB2820197
  KB2847204
  After you have uninstalled those reboot and everything so well.

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

  I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

  Jim

  You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

  If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

  MowGreen Services update - consumer safety

• "Receive the error message" operating system not found '.

  Original title: studio dell 1555

  account held a computer dell laptop but not initialize password is protected F2 and F12 works. screen says operating system not found help

  Hi Gary,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you have problems with the computer not start.

  This problem can occur because of a hardware problem.

  Proceed as from the link below and check if that helps.

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

  Warning: Be careful when you change the settings of the BIOS (Basic Input Output System). The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Meet us if you face problems with computer not start or any other issue of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• Receive the error message "query Kort is not found in the winitnet.dll.

  How can I get rid of query Kort is not found in the winitnet.dll

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. when exactly you get this error message?

  Please answer these questions and tell us more about the issue. This could help us help you better. However, try to perform the SFC (System File Checker) scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer