Error error Code 8024A 000 Windows update

Similar Questions

• window error code 8024A 000 8 updates

  After that windows update troubleshooting I have this error message get again and again the previous error has been 80073701

  Help me...

  Windows Update error 0x8024a000
  http://Windows.Microsoft.com/en-AU/Windows-8/Windows-Update-error-0x8024a000

  If you receive the Windows Update 0x8024a000 or 8024a 000 error when you use Windows Update, there is an automatic convenience store comes with Windows that might be able to solve this problem for you.

  To open the Windows Update troubleshooting tool

  • Open the Windows Update troubleshooting tool by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Under system and security, tap or click Fix problems with Windows Update.

  or

  See this thread

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/Windows-Update-error-code-8024a000/f783cd5d-b6b9-462e-983b-c25d09cde01d

  or

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_update/Windows-Update-error-code-8024a000will-not-update/031eadb9-8cb5-4AA5-9b9f-5ac2fa8dba97

• Windows update doesn't work not, error code 8024A 000 - check forbut say never installed?

  Windows 8 States - error code 8024A 000, I never checked, when to check all the time. Also indicates the installed updates ever?  Am only computing base & do as it says, but does not work. It is a routine control, never had this problem, I don't get it, HELP

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-error-0x8024a000

  If you receive the Windows Update 0x8024a000 or 8024a 000 error when you use Windows Update, there is an automatic convenience store comes with Windows that might be able to solve this problem for you.

  To open the Windows Update troubleshooting tool

  • Open the Windows Update troubleshooting tool by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Under system and security, tap or click Fix problems with Windows Update.

• Error code: 0x800A0046 while windows update sites access & installation of updates... ?

  Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution of the error code: 0x800A0046".

  To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

  1. Click Start and run, type Dcomcnfg, and then click OK.
  2. Expand Component Services and then expand computers.
  3. Do right click my computer and then click Properties.
  4. Click the COM Security tab
  5. Under access permissions, click on change by default.
  6. Check that the following accounts are listed:

     On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Gites, administrators or a user who belongs to the Administrators group	Local access	Allow
     System	Local access	Allow

     On clients based on Microsoft Windows 2000

     The collapse of this Expand table this table

     Account name	Permission type	Permission
     Directors	Local access	Allow
     System	Local access	Allow

  7. If either of these accounts is missing in the access permission box, follow these steps:
     1. Click Add, click Advanced and then click locations.
     2. In the location box, click the Local_Computer_Name and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK twice.
     5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
     6. Repeat step 7 for all accounts that you just added, and then click OK.
  Step 2: Check the DCOM default properties
  1. Click the default properties tab.
  2. Make sure that the following configuration:
     • The Enable Distributed COM on this computer check box is selected.
     • In the default authentication level box, the connection is selected.
     • In the default impersonation level box, the identification is selected.
  3. Make the necessary changes and then click OK.
  4. Restart the computer.

  Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

  1. Click Start, click settings, and then click Control Panel.
  2. Double-click Administrative Tools.
  3. Expand computer management, and then expand local users and groups.
  4. Click users.
  5. In the right pane, double-click the account that you used to log on the computer.
  6. Click on the Member tab of.
  7. Click guests, click on remove and then click OK.

  Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

  1. Click Start, run, type cmd, and then click OK.
  2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
     SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

     Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

  Windows 2000-based clients

  1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:
     http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
  2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
     C:\Program Files\Windows Resource Kits\Tools
  3. Click Start, run, type cmd, and then click OK.
  4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
  5. Type the following command and press ENTER:
     Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
  Step 5: Check the local security policy

  Notes

  • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
  • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
    810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
  1. Click Start and run, type gpedit.msc, and then click OK.
  2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
  3. Click user rights assignment.
  4. In the right pane, double-click on impersonate a client after authentication.
  5. Verify that the Service accounts and directors are included.
  6. If the Service account or the Administrators account is missing, follow these steps to add the account:
     1. Click on add a user or group, click Advanced, and then click locations.
     2. In the location box, click Local_Computer_Name, and then click OK.
     3. Click Find now.
     4. Press CTRL and click the required account names, and then click OK three times.
  7. Restart the computer.

  Step 6: Enable the persistence of user data in Microsoft Internet Explorer

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.
  3. Click the Security tab, and then click Internet.
  4. Click on custom level.
  5. In the settings dialog box, scroll down to the Miscellaneous section.
  6. Under the Userdata persistence, click Activate.
  7. Click OK two times.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• error code 80070673 for windows update for vista

  error code 80070673 for windows update for vista

  Hello Jwisetoyo,

  Thank you for your message.  Please click HERE for a possible solution to your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error Code BC2 when Windows Update links intall Windows Live ID

  I get an error code BC2 whenever Windows Update tries to install Windows Live ID

  Hello

  ·         Are you able to install any other Windows update?

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  0x00000BC2 error means Error_Success_Reboot_Required. This means that you must restart the computer. If you have already connected to a live application, you can restart the computer and check if the problem occurs.

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  For your reference if you have any particular Windows installation updated question. You can follow the steps in the link:

  http://support.Microsoft.com/kb/822798

• Error Code C800044E for Windows updates.

  I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.

  Hello

  1. all the troubleshooting steps have followed so far?

  2. the updates could not be installed?

  3. what fixit did you run?

  4 have have there been recent changes made on the computer before the show?

  I suggest you to follow the steps mentioned below and check if it helps.

  Method 1: Put the computer in a clean boot state and try to install the updates.

  http://support.Microsoft.com/kb/929135

  Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Try to download the update and install.

  Download Center.

  http://www.Microsoft.com/download/en/default.aspx

  Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3: How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Then try to reinstall updates.

  I hope the information is useful!

• ERROR CODE 80070490 INSTALL WINDOWS UPDATE

  Separated from this thread.

  I GET THE ERROR 80070490 CODE WHEN THE WINDOWS UPDATE IS RUN.
  CAN A HELP ON THIS?
  I READ THE ANSWERS TO MOST OF THE SIMILAR COMMENTS, WITHOUT SUCCESS.
  Thank you
  AMEER

  Hello

  What operating system is installed on your computer?

  I suggest following the steps mentioned in the link and check:

  Windows Update, error 0 x 80070490

  https://support.Microsoft.com/en-us/KB/958044

  It will be useful.

• Error code 80070490 in Windows Update (5 important updates failed)

  I am very close to give up because I tried to solve this problem for days now :( I get an error every time in Windows Update (error Code 80070490) and I tried so many times to install these updates, but the exact same error happens every time. I tried to delete all the files in the folder C:\Windows\SoftwareDistribution and start again, but it happens again and again.

  5 updates failed are as follows:

  Update for Windows Vista KB2756822

  Update security for Windows Vista KB2705219

  Update security for Windows Vista KB2731847

  Update for Windows Vista KB2661254

  Update for Windows Vista KB2749655

  My Windows/OS is Vista, and it's a real version enabled.

  Please help will highly appreciated!

  Joe

  Your problem KB948465, which is the update to Vista SP2.

  2016-03-19 20:21:22, info CSI 000001e8 [SR]

  Cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2016-03-19 20:21:22, 000001ea CSI Info [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  2016-03-19 20:21:22, 000001eb CSI Info [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

  Your operating system is corrupted. To eliminate the problems on your computer, you need to restore factory settings and rebuild your computer system.

  A recovery of the system partition contains a copy of the operating system as it was when the computer was purchased new. Using the copy of Vista, you can restore the computer to factory settings. Of course you must back up your data files to an external before restoring support as the process reformats the disk thus clearing all existing files before writing new files.

  Please read Chapter 13 (page 33) Manual:
  5738 http://global-download.Acer.com/GDFiles/document/generic%20UG/generic%20UG_Acer_1.0_A_A.zip?acerid=633967123940952836&STEP1=notebook&Step2=aspire&step3=aspire & OS = ALL & LC = en & BC = ACER & SC = EMEA_27

  The manual suggests that you have an option to restore the operating system and retain user data that I've not seen in a manual before. It is worth trying because it reduces the work involved but I would again as a precaution, back up your data files on external safety precaution if things go wrong.

• What can be done to solve the error code 000641; all windows updates fail

  I get the error code 641 trying to update the 17 items that need to be addressed. I tried several times and the same error message. Updates are marked as critical. Demand appears in my bar for letting me know that I've updated to install tasks.

  Hello

  You did changes to the computer before the show?

  Method 1: Run the fix - it of the article mentioned below:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018/

  Method 3: Put the computer in a clean boot state, and then try to install the updates and see if that helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 4: Temporarily disable UAC and see if that helps.

  Reference:

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Important:

  User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

• ERROR CODE 643 whejn windows update

  get them help error code 643 trying to update windows vista,

  Try the fix it http://support.microsoft.com/kb/971058

• 8024A 000 - Windows Update code does not work and "installing Windows could not configure Windows to run on a hardware on this computer" for Vista64 reinstall

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  I have a HP Pavilion Elite e9180t PC comes with Vista Home Premium 64-bit.  I had the hard drive (Seagate/Barracuda 7200, 750GB) SATA to go over me (after the expiration of the warranty of course) so I replaced it with a WD Caviar Green 1 TB drive.  When I rebooted the news of recovery disk to the new disk, VIsta worked but Windows Update does not work and I get A 8024, 000 error Code.  To worked with Microsoft to try to resolve that (never made), I am frustrated and all saved just reinstall Vista.  When I try to reinstall Vista, I now get the message "installing Windows could not configure Windows to run on a hardware on this computer."  The installation progresses up to the stage of upgrade (a final) then I get error and it puts everything back the way I started.

  The only thing I changed hardware wise is the hard drive, so this error message seems silly because Windows runs on this material.  I even double checked that Vista is always enabled.  Anyone out there have any ideas?

  Hey GMPete

  some posters have reported problems when replacing a drive hp etc. with a hp motherboard not provided player etc.

  I suggest tha contact you hp because it's their recovery process you use

  at the below link HP support forums

  http://h30434.www3.HP.com/

  link below is for direct hp support contact us

  http://welcome.HP.com/country/us/en/contact_us.html

  Walter, the time zone traveller

• Error Code 8007000D install Windows updates

  I'm running Windows 7 on a Lenovo X200S.  Windows Update worked until about a month or two ago and has since been giving me "unknown error code' 8007000D.  I ran the Mr. Fixit tool in aggressive mode and it did not help.  I downloaded and installed KB947821 (sytems update tool) manually and it still does not work.  Suggestions how to fix this would be appreciated.  Thank you.

  8007000D - Error_invalid_data.  Corruption in the folder C:\Windows\SoftwareDistribution.  Please rename
  %windir%/SoftwareDistribution folder.

  This is how you do it in Vista so I guess it's the same thing in Windows 7 (check that you restart however that the folder cannot be recreated properly without a reboot).

  How to rename the software D folder in Vista - distribution agent version

  1. stop the Windows Update service (make sure that you are logged on as administrator)

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click on stop.

  2. Click Start, type %windir%\System32 in the search box and press ENTER.

  Find and rename the folder C:\Windows\SoftwareDistribution.

  3. start the Windows Update service

  Start button | Control Panel | System and Maintenance | Administration tools
  Double-click on Services
  (Provide the administrator password or a confirmation if prompted to do so.)
  Right-click the Windows Update service and click Start.

  This procedure will erase your history on the Windows Update Site. Not important.
  You can always check what updates have been installed quite easily.

  TaurArian [MVP] 2005-2010 - Update Services

• Error code 80070490 searching Windows updates

  original title: Code error 80070490

  Hi all

  I have this Windows Update icon in my tray on the right saying I need to update my computer, which is good, but every time I have try I get

  "Windows could not search for new updates"

  "Error Found."

  "Code 80070490 - updated window has met an unknown error"

  So I do not use Windows Live One Care, I use AVG Virus Protection, and it is up to date!

  Help, please!

  Hi ONTLLs,

  The error you receive occurs if there is corruption in the manifest of component maintenance base.  The only way to fix this is to do a "repair" of Windows Vista installation.

  http://support.Microsoft.com/kb/958044/en-us
  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update - Error Code received: 66A "Windows Update has encountered an unknown error.

  I can't find information on this error code.  Any ideas?

  Hello Clmrn2004,

  Welcome to the Microsoft Answers Forum!

  Please provide us with more information.

  (a) update of who is getting failed with this error code?

  I suggest you to reset the Windows Update components.

  Access the link below and try the Fix mentioned in the article tool to reset the Windows Update components automatically:

  http://support.Microsoft.com/kb/971058

  After running the patch, you can try to run updates and check if this helps you fix your problem.

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings
  Mir - Microsoft Support
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads