Error: Execution of registry is supported only on the FPGA target

I am trying to write a debugging tool to test the communication between objects FP on my host VI to a RT system and then to a FPGA system.  I thought I would "simulate" the three layers with queues between them in order to ensure that the parameters are received correctly - a comprehensive test of Communications virtually.  I want to be able to run this VI on the host.  There are a lot of bits being shifted and twisted and be able to define probes and braekpoints within a single host VI is an advantage.

Initially, it worked fine after copying my FPGA code (with object instantiation of the registers and then reading and writing for them), but now then LabVIEW did another thing that disappears (with no goodbye or anything like that).  When I say that it worked, the values read from the FPGA objects that instantiate their own records showed the correct values when sending data.  This means that LV really instantiate records and has been able to address them individually.

Since then, I get the error appearing in the title, whenever I try to run the VI.

(1) should I really move my parts FPGA to a VI on the FPGA target and have the VI in parallel with the defined target to run in Dev mode (and sends data over the DMA channel)

(2) why this work initially and then fail?

Shane

False alarm, I had no wired all my objects instantiated (and thus a communication VI received default objects with no valid registry.

Program actually works very well.

Still weird, but the error message doesn't really leave everything that was wrong.

Shane.

Tags: NI Software

Similar Questions

  • is eazy customer vpn is supported only on the routers of the 800 pix 7.0 series iOS

    I'm eazy vpn with pix 7.0.4 ios with a 3640 router. the 3640 router is like aeazy vpn client. and the pix as the eazy vpn server. the client connect and continues to ask the xauth parameter. I read in the release notes that requires this vpn eay 12.2 and especially sure ios for 806 routers. the pix also does support eaxy customer vpn routers fo 800 series only. urgent help required. If this true pix sucks big time. they force us to buy routers.they become like microsoft. pls help

    Assane

    According to this document

    http://www.Cisco.com/en/us/products/sw/secursw/ps5299/index.html

    Cisco Easy VPN remote is now available on Cisco 800, 1700, 1800, 2800, 3800 and series UBR900 routers, Cisco PIX 501 security equipment and 506th and Cisco VPN 3002 hardware Clients.

    So no support to 3640...

    M.

    Hope that helps if it is

  • Operation not supported. Check the log of the applications for more details.

    It is my second day of learning ColdFusion. I am able to view the .cfm pages. However, when I tried to browse/load the .cfc file, I kept getting this error.

    Operation not supported. Check the log of the applications for more details.

    Here's my simple tests codes.

    < cfproperty hint = "First CFC" >

    < cffunction name = returntype 'getValue' = 'Chain' access 'public' = >

    < cfreturn "Hellow World" >

    < / cffunction >

    < / cfproperty >

    Where is the "application log" so I can check for more details?

    You should not really 'Browse' for SWC files, in general.  But if you do, then you might want to give the function an output attribute = "Yes".

    The newspapers are easily read in the CFAdmin (go debugging & logging on the left navigation, then choose "Log Files" under this and click on "application.log" in the list of newspapers).

    Alternatively, you can also use Windows Explorer (or what file viewer your use OS) and navigate to {cfDirectory} cfusion\logs, find the file "application.log" and open it.

    HTH,

    ^_^

  • Runtime error program. This application has requested the execution in an unusual way. Contact the application support team.

    Hello

    Please can you help me.
    When I go into my pictures, click on organize, click new file, my computer freezes and I get a runtime error message. "Error running program. This application has requested the execution in an unusual way. Contact the application support team.
    Can you please advise me on what to do in a way that I can understand technical jargin baffles me.
    Thank you
    PETA x

    Hello

    • What application you use to display pictures?

    Try the SFC scan on the computer.

    SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

    Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

    Reference:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

    When I use the converter P2V a VM to ESXi. The VM OS is SUSE10SP2. the process is 98%, give the error:

    FAILED: An error occurred during conversion: "native initrd patch supports only Rhel, SLE and Ubuntu.

    Source operating system is SLES10SP2

    How to deal?

    The source has been recognized as "suse", not as "sles:

    -->

    Are you sure it's SuSE Enterprise and not Open SuSE? Converter supports SLES only.

    Anyway, you can try a hack to make apparently SLES - change the ' / etc/SuSE-release ' on the source machine (or something similar in the model/etc / *-free) and in the first line add "Enterprise." Then try the conversion again. It's the machine 'lsuseinux90 '.

    Regarding the "opscenter' - version has not been recognized too. The second line in the output file should be something like "VERSION = xx".

    HTH

    Plamen

  • Windows Installer error only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

    Trouble with trying to install an MSI Package. Receive the error message only by the installation of the machine is allow. It's when you try to run manually. When you try to run msiexec cmd

    msiexec /i "C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi" /qb/log "C:\install.log.

    = Recording started: 04/09/2013-10:36:27 Build type: SHIP UNICODE 5.00.7601.00 appeal process: C:\windows\system32\msiexec.exe =.
    MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

    MSI (c) (58:C0) [10:36:27:087]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

    MSI (c) (58:88) [10:36:27:107]: Resetting cached policy values
    MSI (c) (58:88) [10:36:27:107]: value of strategy Machine 'Debug' is 0
    MSI (c) (58:88) [10:36:27:107]: * RunEngine:
    Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
    Action:
    Command line:
    MSI (c) (58:88) [10:36:27:107]: Client and UI is none or basic: full installation running on the server.
    MSI (c) (58:88) [10:36:27:107]: grabbed execution mutex.
    MSI (c) (58:88) [10:36:27:147]: Cloaking enabled.
    MSI (c) (58:88) [10:36:27:147]: attempt of activation of all disabled privileges before calling install on server
    MSI (c) (58:88) [10:36:27:147]: meter is incremented to disable the stop. Counter after increment: 0
    MSI (s) (C 54:4) [10:36:27:157]: running the installation inside the multi-package transaction Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi
    MSI (s) (C 54:4) [10:36:27:157]: grabbed execution mutex.
    MSI (s) (54:F8) [10:36:27:157]: Resetting cached policy values
    MSI (s) (54:F8) [10:36:27:157]: value of strategy Machine 'Debug' is 0
    MSI (s) (54:F8) [10:36:27:157]: * RunEngine:
    Product: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi
    Action:
    Command line:
    MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'DisableUserInstalls' is 0
    MSI (s) (54:F8) [10:36:27:477]: value 'SearchOrder' user policy is 'nmu '.
    MSI (s) (54:F8) [10:36:27:477]: "DisableMedia" user policy value is 0
    MSI (s) (54:F8) [10:36:27:477]: value of strategy Machine 'AllowLockdownMedia' is 0
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media enabled only if the package is safe.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: looking for sourcelist for product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: added {C28136F7-F2C7-4426-B26F-F7E03922B34B}; for the potential sourcelist (pcode; disc; relpath) list.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: check now product {C28136F7-F2C7-4426-B26F-F7E03922B34B}
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: Media is enabled for the product.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: attempting to use LastUsedSource from source list.
    MSI (s) (54:F8) [10:36:27:477]: SOURCEMGMT: source C:\windows\ccmcache\4\ by train.
    MSI (s) (54:F8) [10:36:27:787]: entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (54:F8) [10:36:27:787]: source specified is already in a list.
    MSI (s) (54:F8) [10:36:27:787]: value 'SearchOrder' user policy is 'nmu '.
    MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'DisableBrowse' is 0
    MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'AllowLockdownBrowse' is 0
    MSI (s) (54:F8) [10:36:27:787]: adding new sources is allowed.
    MSI (s) (54:F8) [10:36:27:787]: the LastUsedSource value: C:\windows\ccmcache\4\.
    MSI (s) (54:F8) [10:36:27:787]: value LastUsedType: n.
    MSI (s) (54:F8) [10:36:27:787]: A LastUsedIndex: 1.
    MSI (s) (54:F8) [10:36:27:787]: SOURCEMGMT: resolved source: 'C:\windows\ccmcache\4\ '.
    MSI (s) (54:F8) [10:36:27:787]: value of strategy Machine 'LimitSystemRestoreCheckpointing' is 0
    MSI (s) (54:F8) [10:36:27:787]: Note: 1: 1715 2: Services for 32-bit Outlook Mimecast
    MSI (s) (54:F8) [10:36:27:787]: SRSetRestorePoint API call. dwRestorePtType: 0, dwEventType: 102, llSequenceNumber: 0, szDescription: «Installed it Services for Outlook 32-bit»
    MSI (s) (54:F8) [10:36:27:787]: the system restore service is disabled. Referred State: 1058. GetLastError() returned: 1058
    MSI (s) (54:F8) [10:36:28:117]: file will have the applied safety of OpCode.
    MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> ' C:\Mimecast Services for Outlook 4.0.411.5287 (32 bit) GPO.msi ' against the software restriction policy
    MSI (s) (54:F8) [10:36:28:147]: STRATEGY of RESTRICTION SOFTWARE: Services C:\Mimecast for Outlook 4.0.411.5287 (32-bit) GPO.msi has a digital signature
    MSI (s) (54:F8) [10:36:28:547]: STRATEGY of RESTRICTION SOFTWARE: C:\Mimecast Services for Outlook 4.0.411.5287 (32-bit) GPO.msi is allowed to run at the level of authorization 'unlimited '.
    MSI (s) (54:F8) [10:36:28:547]: dialogue of end not activated
    MSI (s) (54:F8) [10:36:28:547]: ==> C:\windows\ccmcache\4\Mimecast4.0.msi original packaging
    MSI (s) (54:F8) [10:36:28:547]: we're running out of ==> C:\windows\Installer\14b48052.msi package
    MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
    MSI (s) (54:F8) [10:36:28:547]: APPCOMPAT: no matching ProductCode found in the database.
    MSI (s) (54:F8) [10:36:28:557]: MSCOREE not loaded loading copy from system32
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisablePatch' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AllowLockdownPatch' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableLUAPatching' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableFlyWeightPatching' is 0
    MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: looking for entry with ProductCode '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' appcompat database
    MSI (s) (54:F8) [10:36:28:557]: APPCOMPAT: no matching ProductCode found in the database.
    MSI (s) (54:F8) [10:36:28:557]: transformations are not secure.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is 'C:\install.log.
    MSI (s) (54:F8) [10:36:28:557]: command line: MSIINSTALLPERUSER = 3 CURRENTDIRECTORY = C: \ CLIENTUILEVEL = 2 CLIENTPROCESSID = 3672
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding PackageCode property. Its value is '{6C9809C5-9DBC-4683-AE5F-3E05D53939EA} '.
    MSI (s) (54:F8) [10:36:28:557]: Product Code spent in Engine.Initialize: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
    MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties before transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
    MSI (s) (54:F8) [10:36:28:557]: the Product Code of the table of properties after transformations: "{C28136F7-F2C7-4426-B26F-F7E03922B34B}".
    MSI (s) (54:F8) [10:36:28:557]: unregistered product: first start installation
    MSI (s) (54:F8) [10:36:28:557]: has determined that the existing product (this product or the product being upgraded with a patch) is installed by user.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting ALLUSERS property. Its current value is '1 '.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
    MSI (s) (54:F8) [10:36:28:557]: MSI_LUA: invites of credentials not required, the user is an administrator
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding ProductState property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:557]: entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (54:F8) [10:36:28:557]: source specified is already in a list.
    MSI (s) (54:F8) [10:36:28:557]: value 'SearchOrder' user policy is 'nmu '.
    MSI (s) (54:F8) [10:36:28:557]: adding new sources is allowed.
    MSI (s) (54:F8) [10:36:28:557]: the Package name from the configuration data: "Mimecast4.0.msi."
    MSI (s) (54:F8) [10:36:28:557]: Note: 2 1: 2262: AdminProperties 3:-2147287038
    MSI (s) (54:F8) [10:36:28:557]: Machine policy value 'DisableMsi' is 0
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'AlwaysInstallElevated' is 0
    MSI (s) (54:F8) [10:36:28:557]: "AlwaysInstallElevated" user policy value is 0
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is assigned admin: LocalSystem has the key to publish.
    MSI (s) (54:F8) [10:36:28:557]: product {C28136F7-F2C7-4426-B26F-F7E03922B34B} is managed.
    MSI (s) (54:F8) [10:36:28:557]: the product '{C28136F7-F2C7-4426-B26F-F7E03922B34B}' is running with elevated privileges: product is affected.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding MSIINSTALLPERUSER property. Its value is '3'.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is "C:\". ».
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '2'.
    MSI (s) (54:F8) [10:36:28:557]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is '3672'.
    MSI (s) (54:F8) [10:36:28:557]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiRestartManagerSessionKey property. Its value is 'b9237eca8dffb44583db9105bf61f283 '.
    MSI (s) (54:F8) [10:36:28:567]: MANAGER of REBOOT: logon.
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: deleting MSIINSTALLPERUSER property. Its current value is '3'.
    MSI (s) (54:F8) [10:36:28:567]: TRANSFORMS property is now:
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding PRODUCTLANGUAGE property. Its value is "1033".
    MSI (s) (54:F8) [10:36:28:567]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application data
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Favorites
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network shortcuts
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Documents
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer shortcuts
    MSI (s) (54:F8) [10:36:28:567]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\AppData\Local
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: C:\Users\tech.support\Pictures
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Menu\Programs\Administrative of Directors Data\Microsoft\Windows\Start
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (54:F8) [10:36:28:577]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application start\program Data\Microsoft\Windows\Start
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: \\gblon-v-fp001\users$\tech.support\Desktop
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (s) (54:F8) [10:36:28:587]: SHELL32::SHGetFolderPath returned: C:\windows\Fonts
    MSI (s) (54:F8) [10:36:28:587]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
    MSI (s) (54:F8) [10:36:28:597]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
    MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding USERNAME property. Its value is "Oriel securities user".
    MSI (s) (54:F8) [10:36:28:597]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is "Oriel Securities Ltd.".
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\windows\Installer\14b48052.msi '.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is 'C:\windows\ccmcache\4\Mimecast4.0.msi '.
    MSI (s) (54:F8) [10:36:28:597]: value of strategy Machine 'MsiDisableEmbeddedUI' is 0
    MSI (s) (54:F8) [10:36:28:597]: Note: 1: 2205 2:3: Package_correctif
    MSI (s) (54:F8) [10:36:28:597]: policy value 'DisableRollback' Machine is 0
    MSI (s) (54:F8) [10:36:28:597]: strategy user 'DisableRollback' is 0
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding UILevel property. Its value is '3'.
    = Logging started: 04/09/2013-10:36:28 =.
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding ACTION property. Its value is 'INSTALL '.
    MSI (s) (54:F8) [10:36:28:597]: doing action: INSTALL
    Action start 10:36:28: INSTALL.
    MSI (s) (54:F8) [10:36:28:597]: ExecuteSequence running
    MSI (s) (54:F8) [10:36:28:597]: action driving: FindRelatedProducts
    Action start 10:36:28: FindRelatedProducts.
    MSI (s) (54:F8) [10:36:28:597]: action driving: AppSearch
    Action ended at 10:36:28: FindRelatedProducts. Returns the value 1.
    Action start 10:36:28: AppSearch.
    MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
    MSI (s) (54:F8) [10:36:28:597]: PROPERTY CHANGE: adding NETFRAMEWORK40FULL property. Its value is '#1 '.
    MSI (s) (54:F8) [10:36:28:597]: Note: 2 1: 2262: Signature 3:-2147287038
    MSI (s) (54:F8) [10:36:28:597]: action driving: OutlookVersionCheck
    Action ended at 10:36:28: AppSearch. Returns the value 1.
    MSI (s) (54:C8) [10:36:28:627]: call for a custom action to distance. DLL: C:\windows\Installer\MSI837D.tmp, point of entry: OutlookVersionCheck
    MSI (s) (54:B8) [10:36:28:627]: generation random cookie.
    MSI (s) (54:B8) [10:36:28:637]: created server custom with PID 4656 (0 x 1230) Action.
    MSI (s) (54:80) [10:36:28:667]: running as a service.
    MSI (s) (54:80) [10:36:28:667]: Hello, I am your 32-bit custom action Server Impersonated.
    Action start 10:36:28: OutlookVersionCheck.
    SFXCA: Extraction of a custom action to the temporary directory: C:\windows\Installer\MSI837D.tmp-\
    SFXCA: Link to the CLR version v4.0.30319
    Call to the custom action CustomAction_OutlookCheck! CustomAction_OutlookCheck.CustomActions.OutlookVersionCheck
    BEGIN OutlookVersionCheck
    OUTLOOK BITNESS IS: x 86
    Key checking: Software\Microsoft\Office\11.0\Outlook
    Key checking: Software\Wow6432Node\Microsoft\Office\11.0\Outlook
    Key checking: Software\Microsoft\Office\12.0\Outlook\InstallRoot
    Key checking: Software\Wow6432Node\Microsoft\Office\12.0\Outlook\InstallRoot
    MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: adding OUTLOOK_INSTALLED property. Its value is 'TRUE '.
    Key checking: Software\Microsoft\Office\14.0\Outlook\InstallRoot
    Found version: Outlook 2010
    Key checking: Software\Wow6432Node\Microsoft\Office\14.0\Outlook\InstallRoot
    MSI (s) (54. 68) [10:36:28:827]: PROPERTY CHANGE: property to change OUTLOOK_VERSION. Its current value is 'NONE '. Its new value: "Outlook 2010".
    Found version: Outlook 2010
    OUTLOOK_INSTALLED is: TRUE
    IS THE VERSION of OUTLOOK: Outlook 2010
    MSI (s) (54:F8) [10:36:28:830]: action driving: LaunchConditions
    Action ended at 10:36:28: OutlookVersionCheck. Returns the value 1.
    Action start 10:36:28: LaunchConditions.
    MSI (s) (54:F8) [10:38:26:502]: product: service Mimecast for 32-bit Outlook - only by the installation of the machine is allowed. Please make sure that the user has the appropriate rights to do so.

    MSI (c) (58:C0) [10:36:28:850]: established police.  Charset: Req = 0, Ret = 0, fonts: Req = MS Shell Dlg, Ret = MS Shell Dlg

    Installation is allowed only by the machine. Please make sure that the user has the appropriate rights to do so.
    Action ended at 10:38:26: LaunchConditions. Return value 3.
    Action ended at 10:38:26: INSTALL. Return value 3.
    Property (S): UpgradeCode = {586A589B-D6D5-48D3-9B6D-571EF230ED6A}
    Property (S): NETFRAMEWORK40FULL = 1 #.
    Property (S): LAUNCHOUTLOOKONEXIT = 1
    Property (S): WIXUI_INSTALLDIR = INSTALLDIR
    Property (S): OutlookOpen = false
    Property (S): ProgramFilesFolder = C:\Program Files (x 86).
    Property (S): VersionNT = 601
    Property (S): Manufacturer = Mimecast Ltd
    Property (S): ProductCode = {C28136F7-F2C7-4426-B26F-F7E03922B34B}
    Property (S): ProductLanguage = 1033
    Property (S): ProductName = Mimecast Services for 32-bit Outlook
    Property (S): ProductVersion = 4.0.348.5166
    Property (S): ARPPRODUCTICON = MainIcon.exe
    Property (S): ARPHELPLINK = * address email is removed from the privacy *
    Property (S): ARPNOMODIFY = 0
    Property (S): Platform = *.
    Property (S): ROOTDRIVE = C:\\
    Property (S): MsiBitness = x 86
    Property (S): MimecastInstaller = *.
    Property (S): CAP_Common = *.
    Property (S): CAP_Common.Options = *.
    Property (S): CAP_Common.Options.Credentials = *.
    Property (S): CAP_Common.Options.ChangePassword = *.
    Property (S): CAP_Common.Options.Network = *.
    Property (S): CAP_Common.Options.Network.Read = *.
    Property (S): CAP_Common.Options.Network.Update = *.
    Property (S): CAP_Common.Options.Capabilities = *.
    Property (S): CAP_Common.Update.Manual = *.
    Property (S): CAP_Archive = *.
    Property (S): CAP_Archive.Search = *.
    Property (S): CAP_Archive.Search.Quick = *.
    Property (S): CAP_Archive.Search.Basic = *.
    Property (S): CAP_Archive.Search.Builder = *.
    Property (S): CAP_Archive.Search.Context = *.
    Property (S): CAP_Archive.Search.Recent = *.
    Property (S): CAP_Archive.Search.Favourite = *.
    Property (S): CAP_Archive.Search.Manage = *.
    Property (S): CAP_Gateway = *.
    Property (S): CAP_Gateway.Block = *.
    Property (S): CAP_Gateway.Block.Address = *.
    Property (S): CAP_Gateway.Block.Domain = *.
    Property (S): CAP_Gateway.Block.ReportSpam = *.
    Property (S): CAP_Gateway.Block.ManagedSenders = *.
    Property (S): CAP_Gateway.OnHoldItems = *.
    Property (S): CAP_Gateway.OnHoldItems.Personal = *.
    Property (S): CAP_Gateway.OnHoldItems.Moderated = *.
    Property (S): CAP_Gateway.OnHoldItems.Release = *.
    Property (S): CAP_Gateway.OnHoldItems.Block = *.
    Property (S): CAP_Gateway.Track = *.
    Property (S): CAP_Gateway.Transport = *.
    Property (S): CAP_Gateway.Transport.Secure = *.
    Property (S): CAP_Gateway.Transport.CCM = *.
    Property (S): CAP_Gateway.Transport.Stationery = *.
    Property (S): CAP_Gateway.Transport.Stationery.None = *.
    Property (S): CAP_Gateway.Transport.Stationery.Select = *.
    Property (S): CAP_Gateway.Transport.Attachments = *.
    Property (S): CAP_Gateway.Transport.Attachments.Convert = *.
    Property (S): CAP_Gateway.Transport.Attachments.Metadata = *.
    Property (S): CAP_Gateway.Transport.Attachments.StripLink = *.
    Property (S): CAP_Continuity = *.
    Property (S): CAP_Continuity.Mailbox = *.
    Property (S): CAP_Continuity.Mailbox.ReceivedItems = *.
    Property (S): CAP_Continuity.Mailbox.SentItems = *.
    Property (S): CAP_Continuity.Monitor = *.
    Property (S): CAP_Continuity.Monitor.Auto = *.
    Property (S): CAP_Continuity.Monitor.User = *.
    Property (S): CAP_Continuity.Monitor.Admin = *.
    Property (S): CAP_Continuity.Enable = *.
    Property (S): CAP_Continuity.Enable.Auto = *.
    Property (S): CAP_Continuity.Enable.Admin = *.
    Property (S): CAP_Piits = *.
    Property (S): CAP_Piits.Management = *.
    Property (S): CAP_Piits.AutoMount = *.
    Property (S): Global.Service.AccountType = *.
    Property (S): Global.Service.Username = *.
    Property (S): Global.Service.Password = *.
    Property (S): Global.WebProxy.Enable = *.
    Property (S): Global.WebProxy.Type = *.
    Property (S): Global.WebProxy.URL = *.
    Property (S): Global.WebProxy.Username = *.
    Property (S): Global.WebProxy.Password = *.
    Property (S): Global.Settings.IgnoreLocal = *.
    Property (S): Global.AutoUpdate.URL = *.
    Property (S): Global.AutoUpdate.Enable = *.
    Property (S): Global.Logging.LogDirectory = *.
    Property (S): Global.Logging.MaxFileSize = *.
    Property (S): Global.Service.MaxRolls = *.
    Property (S): Global.Logging.Level = *.
    Property (S): Session.Pits.FolderSyncInterval = *.
    Property (S): Global.Piits.MaxMessagesPerFolder = *.
    Property (S): Global.Service.InstallDirectory = *.
    Property (S): Global.Service.DataCacheSize = *.
    Property (S): Session.Continuity.PreDupeDuration = *.
    Property (S): Session.Continuity.PostDupeDuration = *.
    Property (S): Session.Continuity.HardFrequency = *.
    Property (S): Session.Continuity.SoftDuration = *.
    Property (S): Session.Continuity.EndContinuityExchangeAvailable = *.
    Property (S): Session.Continuity.EndContinuityMimecastUnavailable = *.
    Property (S): Global.Feedback.Recipients = *.
    Property (S): DefaultUIFont = *.
    Property (S): MSIRESTARTMANAGERCONTROL = DisableShutdown
    Property (S): REBOOT = ReallySuppress
    Property (S): OUTLOOK_VERSION = Outlook 2010
    Property (S): OUTLOOK_BITNESS = x 86
    Property (S): ErrorDialog = ErrorDlg
    Property (S): SERVICE_DIR = Windows Service Mimecast
    Property (S): SecureCustomProperties = NETFRAMEWORK40FULL; NEWERPRODUCTFOUND; OLDAPPFOUND; PREVIOUSVERSIONSINSTALLED; WIX_DOWNGRADE_DETECTED; WIX_UPGRADE_DETECTED
    Property (S): MsiHiddenProperties = _LicenseAgreed; CAP_Archive; CAP_Archive.search; CAP_Archive.search.Basic; CAP_Archive.search.Builder; CAP_Archive.search.context; CAP_Archive.search.favourite; CAP_Archive.search.manage; CAP_Archive.search.quick; CAP_Archive.search.recent; CAP_Common; CAP_Common.options; CAP_Common.options.capabilities; CAP_Common.options.ChangePassword; CAP_Common.options.credentials; CAP_Common.options.network; CAP_Common.options.network.read; CAP_Common.options.network.Update; CAP_Common.update.manual; CAP_Continuity; CAP_Continuity.enable; CAP_Continuity.enable.admin; CAP_Continuity.enable.Auto; CAP_Continuity.mailbox; CAP_Continuity.mailbox.ReceivedItems; CAP_Continuity.mailbox.SentItems; CAP_Continuity.monitor; CAP_Continuity.monitor.admin; CAP_Continuity.monitor.Auto; CAP_Continuity.monitor.user; CAP_Gateway; CAP_Gateway.block; CAP_Gateway.block.address; CAP_Gateway.block.domain; CAP_Gateway.block.ManagedSenders; CAP_Gateway.block.ReportSpam; CAP_Gateway.OnHoldItems; CAP_Gateway.OnHoldItems.block; CAP_Gateway.OnHoldItems.moderated; CAP_Gateway.OnHoldItems.personal; CAP_Gateway.OnHoldItems.release; CAP_Gateway.track; CAP_Gateway.transport; CAP_Gateway.transport.attachments; CAP_Gateway.transport.attachments.convert; CAP_Gateway.transport.attachments.metadata; CAP_Gateway.transport.attachments.StripLink; CAP_Gateway.transport.CCM; CAP_Gateway.transport.secure; CAP_Gateway.transport.stationery; CAP_Gateway.transport.stationery.None; CAP_Gateway.transport.stationery.Select; CAP_Piits; CAP_Piits.automount; CAP_Piits.Management; DefaultUIFont; Global.AutoUpdate.Enable; Global.AutoUpdate.URL; Global.Feedback.Recipients; Global.Logging.Level; Global.Logging.LogDirectory; Global.Logging.MaxFileSize; Global.Piits.MaxMessagesPerFolder; Global.Service.AccountType; Global.Service.DataCacheSize; Global.Service.InstallDirectory; Global.Service.MaxRolls; Global.Service.Password; Global.Service.Username; Global.Settings.IgnoreLocal; Global.WebProxy.Enable; Global.WebProxy.Password; Global.WebProxy.Type; Global.WebProxy.URL; Global.WebProxy.Username; MimecastInstaller; PLATFORM; Session.Continuity.EndContinuityExchangeAvailable; Session.Continuity.EndContinuityMimecastUnavailable; Session.Continuity.HardFrequency; Session.Continuity.PostDupeDuration; Session.Continuity.PreDupeDuration; Session.Continuity.SoftDuration; Session.Pits.FolderSyncInterval
    Property (S): MsiLogFileLocation = C:\install.log
    Property (S): PackageCode = {6C9809C5-9DBC-4683-AE5F-3E05D53939EA}
    Property (S): ProductState = 1
    Property (S): PRODUCTLANGUAGE = 1033
    Property (S): CURRENTDIRECTORY = C:\
    Property (S): CLIENTUILEVEL = 2
    Property (S): CLIENTPROCESSID = 3672
    Property (S): MsiRestartManagerSessionKey = b9237eca8dffb44583db9105bf61f283
    Property (S): VersionDatabase = 200
    Property (S): MsiSystemRebootPending = 1
    Property (S): VersionMsi = 5.00
    Property (S): VersionNT64 = 601
    Property (S): WindowsBuild = 7601
    Property (S): ServicePackLevel = 1
    Property (S): ServicePackLevelMinor = 0
    Property (S): MsiNTProductType = 1
    Property (S): WindowsFolder = C:\windows\
    Property (S): WindowsVolume = C:\
    Property (S): System64Folder = C:\windows\system32\
    Property (S): SystemFolder = C:\windows\SysWOW64\
    Property (S): RemoteAdminTS = 1
    Property (S): TempFolder = C:\Users\TECH~1.SUP\AppData\Local\Temp\
    Property (S): CommonFilesFolder directory = C:\Program Files (x 86) \Common Files\
    Property (S): ProgramFiles64Folder = C:\Program Files\
    Property (S): CommonFiles64Folder = C:\Program Files\ Files\Fichiers
    Property (S): AppDataFolder = \\gblon-v-fp001\users$\tech.support\Application Data\
    Property (S): FavoritesFolder = \\gblon-v-fp001\users$\tech.support\Favorites\
    Property (S): NetHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Network Shortcuts\
    Property (S): PersonalFolder = \\gblon-v-fp001\users$\tech.support\Documents\
    Property (S): PrintHoodFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Printer Shortcuts\
    Property (S): RecentFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Recent\
    Property (S): SendToFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\SendTo\
    Property (S): TemplateFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Templates\
    Property (S): CommonAppDataFolder = C:\ProgramData\
    Property (S): LocalAppDataFolder = C:\Users\tech.support\AppData\Local\
    Property (S): MyPicturesFolder = C:\Users\tech.support\Pictures\
    Property (S): AdminToolsFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start administration Tools\
    Property (S): StartupFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start demarrer\programmes\demarrage\
    Property (S): ProgramMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\Programs\
    Property (S): StartMenuFolder = \\gblon-v-fp001\users$\tech.support\Application Data\Microsoft\Windows\Start Menu\
    Property (S): DesktopFolder = \\gblon-v-fp001\users$\tech.support\Desktop\
    Property (S): Font = C:\windows\Fonts\
    Property (S): GPTSupport = 1
    Property (S): OLEAdvtSupport = 1
    Property (S): ShellAdvtSupport = 1
    Property (S): MsiAMD64 = 6
    Property (S): Msix64 = 6
    Property (S): Intel = 6
    Property (S): PhysicalMemory = 4027
    Property (S): VirtualMemory = 5339
    Property (S): AdminUser = 1
    Property (S): MsiTrueAdminUser = 1
    Property (S): LogonUser = tech.support
    Property (S): UserSID = S-1-5-21-583907252-2049760794-725345543-5685
    Property (S): UserLanguageID = 2057
    Property (S): ComputerName = OSLLONPC052
    Property (S): SystemLanguageID = 2057
    Property (S): ScreenX = 1024
    Property (S): ScreenY = 768
    Property (S): CaptionHeight = 22
    Property (S): BorderTop = 1
    Property (S): BorderSide = 1
    Property (S): TextHeight = 16
    Property (S): TextInternalLeading = 3
    Property (S): ColorBits = 32
    Property (S): TTCSupport = 1
    Property (S): Time = 10:38:26
    Property (S): Date = 04/09/2013
    Property (S): MsiNetAssemblySupport = 4.0.30319.1
    Property (S): MsiWin32AssemblySupport = 6.1.7601.17514
    Property (S): RedirectedDllSupport = 2
    Property (S): MsiRunningElevated = 1
    Property (S): The privilege = 1
    Property (S): Name of USER = Oriel securities user
    Property (S): COMPANYNAME = Oriel Securities Ltd.
    Property (S): basis of DATA = C:\windows\Installer\14b48052.msi
    Property (S): OriginalDatabase = C:\windows\ccmcache\4\Mimecast4.0.msi
    Property (S): UILevel = 3
    Property (S): ACTION = INSTALL
    Property (S): OUTLOOK_INSTALLED = TRUE
    MSI (s) (54:F8) [10:38:26:532]: see clean files/packages, if there
    MSI (s) (54:F8) [10:38:26:532]: MainEngineThread returned 1603
    MSI (s) (C 54:4) [10:38:26:542]: RESTART MANAGER: closed Session.
    MSI (s) (C 54:4) [10:38:26:542]: sequence number number for this installation system restore.
    = Logging stopped: 04/09/2013-10:38:26 =.
    MSI (s) (C 54:4) [10:38:26:542]: strategy user 'DisableRollback' is 0
    MSI (s) (C 54:4) [10:38:26:542]: policy value 'DisableRollback' Machine is 0
    MSI (s) (C 54:4) [10:38:26:542]: meter is incremented to disable the stop. Counter after increment: 0
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
    MSI (s) (C 54:4) [10:38:26:542]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3:2
    MSI (s) (C 54:4) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
    MSI (s) (C 54:4) [10:38:26:542]: restoration of the environment variables
    MSI (s) (C 54:4) [10:38:26:542]: object to destroy RemoteAPI.
    MSI (s) (54:B8) [10:38:26:542]: end of thread Custom Action Manager.
    MSI (c) (58:88) [10:38:26:542]: disable the stop against the decrement. If counter > = 0, will be denied the stop.  Counter after decrement:-1
    MSI (c) (58:88) [10:38:26:542]: MainEngineThread returned 1603
    = Recording stopped: 04/09/2013-10:38:26 =.

    Appreciate that any direction. Seems that maybe the MSI package might have broken this machine

    Hi Dan,

    This computer is on a domain network?

    I suggest that post you the question in Mimecast forums for more information support:

    Support community-powered Mimecast

    https://community.Mimecast.com/Mimecast

    Hope this information helps.

  • Setup error Oracle Service registry 11.1.1 with no release to clear the log

    I get the following error during the installation of the OSR, I am new to ORACLE can we all please let me know solution. The log file lists these vague lines. How can I troubleshoot it. I have Windows 7 and 12g of Oracle is installed. I created a schema user "OSR" as well. Can anyone help?

    ================================================================

    Java returned: 1
    Failed installation. If available, see 'C:\Oracle\Middleware\Weblogic\registry111\log\install.log '.
    For correct installation settings and the installation of curriculum vitae, click recovery.
    .
    #
    #Mon 22 dec 18:51:03 2014 PKT
    porting. Context = Registry
    DB. System.Name.condition = Oracle
    install. Server.Operator.Name = Oracle
    porting. WebLogic.deploy.Mark =
    Oracle.Server.Host = localhost
    install. Server.SMTP.port = 25
    alldb. Create.DataSource.Name=JDBC/registryDS
    porting. WebLogic.admin.Password = *.
    install. Server.SMTP.Password.confirmation = *.
    install. Server.admin.mail=admin@localhost
    install. OS.is.win.AndCondition = true
    Create.Desktop.Icons = no
    porting.support.multihost = true
    porting. WebLogic.Home =
    Setup.Skip.Marker =
    porting. WebLogic.deploy.type.condition = Domain
    install. Server.SMTP.default.sender.Name = NAB
    porting. WebLogic.admin.port = 7001
    install. Server.SMTP.Password = *.
    porting.HTTPS.use = no
    Account.backend.type.condition = Database
    install. Server.SMTP.title =
    alldb. Advance.condition = false
    install. Server.admin.Name = admin
    alldb. Create.DataSource.WebLogic = Yes
    install. Server.admin.Password.confirmation = *.
    Dist.version = 11.1.1
    install. [email protected]
    alldb. Create.DataSource = Yes
    install.type.condition = standalone
    alldb. JDBC. Custom.uribox = no
    install. Server.SMTP.Host = localhost
    Create.menu.Items = no
    alldb. Create.Drop.condition = Connect
    Oracle.Database.Name = ORCL
    porting. WebLogic.admin.Host = localhost
    porting. WebLogic.https.port = 7102
    install. Directory = C\:\\Oracle\\Middleware\\Weblogic\\registry111
    install. Server.admin.Password = *.
    Oracle.Server.port = 1521
    porting. WebLogic.http.port = 7101
    DB. ShowAll.condition = false
    porting. Server.type.condition = standalone
    alldb. JDBC. Custom.urifield =
    alldb. JDBC.drivers.Paths=C\:\\app\\nkhan\\product\\12.1.0\\dbhome_1\\jdbc\\lib\\ojdbc6.jar
    porting. HostName = Oracle - nkhan.xavor.com
    porting. WebLogic.admin.Name =
    porting. WebLogic.java.Home =
    porting.type.condition = weblogic11g
    install. Server.SMTP.Account.Name =
    Oracle.Database.User = OSR
    install. Windows.menu = Oracle 11.1.1 Service registry
    Oracle.Database.Password = *.

    [java] BUILD FAILED
    [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:785: The following error occurred during the execution of this line:
    [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:390: The following error occurred during the execution of this line:
    [java] C:\Oracle\Middleware\Weblogic\registry111\etc\setup\database.XML:207: The following error occurred during the execution of this line:
    [java] C:\Oracle\Middleware\Weblogic\registry111\etc\db\oracle\installOracleDB.XML:184: Java returned: 1

    [java] Total time: 3 seconds
    Java returned: 1
    Failed installation. If available, see 'C:\Oracle\Middleware\Weblogic\registry111\log\install.log '.
    For correct installation settings and the installation of curriculum vitae, click recovery.
    =============================================================================

    I had Oracle database 12 initially. I was not aware that Oracle Service registry currently supports 10g or 11g database. So, I uninstalled the 12 database and installed 11g. Then installed the Service registry and the fixed number.

  • Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

    Hello

    I tried to fix this for hours, I hope someone can help me.

    I downloaded the ISO "Win10_1607_English_x64.iso" (4.29 GB) file and with him came a "info.plist" (2 KB), so they are both on my 64 GB USB Drive (format: MS-DOS (FAT32)) called 'WINSTALL '.

    I have the ISO on the USB key, and it is selected as the ISO image in Boot Camp. I also have the USB the disk of destination selected, and yet I get this error:

    Your bootable USB key could not be created

    Boot Camp supports only Windows 7 or later installation on that platform. Please use a file ISO of Windows 7 or later installation.

    I'm currently under OS X El Capitan Version 10.11.6 on my iMac (21.5 inch, end 2012) that is compatible with Windows 10.

    If anyone can help me I honestly love so much, I tried contacting Apple Support staff by phone, they said that they can't do anything, I tried to contact their Live Chat, but none of this has helped to solve the problem, and I tried to look online, but can't find too much.

    Thanks in advance for any answer!

    What OSX Version do you have? This site gives the requirements of Bootcamp: minimum system requirements to install Windows on your Mac with Boot Camp - Apple Support. And you did an upgrade? Could it be that the upgrade will not correctly for the OS?

    Looking at the 10 Windows version you downloaded, is the update of birthday, which was released less than a month ago. It could be that Apple is not reconisgin the Windows version when reading the disk, because it is too recent. I don't know if you have access to the download of the previous generation and do a Windows update?

  • What is error.-2147212300 executing registry cleaning?

    My Norton 360 always tells me to clean the registry of broken biscuits, but the error sign is displayed when executing the task, and I don't know how to solve the problem. Thank you.

    Hello

    You should check with Norton Support.

    Norton support
    https://www-secure.Symantec.com/Norton-support/JSP/product.jsp?LG=English&CT=United+States&product=home&version=1&PVID=f-home

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I get the error message "security log is full, only an administrator can log in to solve the problem."

    On a windows machine XP after putting in place the machine administrator and when trying to connect as a user, I get the error message "security log is full, only an administrator can log in to solve the problem." I know how to solve this problem by going to the event viewer, by selecting the security log and by setting the journal to "ignore the events as needed", but I would like to create a script that will do this automatically for me.

    so far my research revealed that the value of the registry key [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Security] "MaxSize" controls this setting and changing the value default DWORD_VALUE to 0 x 01000000 to 0 x 00000000, change is possible. Well, when I did it in regedit, nothing has changed in the security log properties, the default setting of 'remove older items after 7 days' remained the same.

    Can someone tell me what registry key, I need to change in order to make this change? Keep in mind im trying to include this in a script.

    Thank you

    Hi teddorosheff,

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

    Windows Vista IT Pro

  • DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

    My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

    I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

    19 code means there is a driver conflict such as two devices attempt to use the same
    resources.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then check the cables
    both ends. Remove and replace, do not just tight. For laptops, you can often clean the
    power and data of the contacts with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the system manufacturer
    and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
    Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
    others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

    ORIGINAL TITLE: Vista problems

    Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.

    Hello

    What is the exact error message related to the windows registry?

    I suggest you follow the steps mentioned below:

    Method 1:

    Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.

    Method 2:

    Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 3:

    If the previous step fails, follow the steps in the link:

    http://support.Microsoft.com/kb/927391

  • When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

    When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

    Hi Gore EzekiahTongun

     

    You can see the steps in the below mentioned article Microsoft and verification.

    http://support.Microsoft.com/kb/947366

     

    I hope this helps.

  • Error code 19 registry on any DVD player.

    I get the following message when I install a DVD drive on my laptop CQ60 Compaq Vista home edition 32 bit running.

    Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    I tried to uninstall and install this unit several times.  I tried to install a USB DVD drive as well (and uninstall) and get the same error.

    Seeking solutions sends data to Microsoft (apparently) but I have no feedback.

    I don't see an option "UNINSTALL - REBOOT.  I uninstalled the devices (Optiarc AD-7561 and the DVD ROM Targus USB drive) and restarted the computer.  When both are installed, I get the same error from registry

    Hello

    UNINSTALL you then RESTART when back in Device Manager - which means rebooting the system.

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error Windows Explorer application has requested to terminate in an unusual way. Please contact the support team of the application for more information

    Everytime I open Windows Explorer, I get this message. A window opens called Microsoft Visual C++ Runtime Library and he says: "this application has requested the execution to terminate in an unusual way. Please contact support team of the application for more information. "I clicked the OK button, he is looking for a solution and then closes the program. Is there something to the recent update that messed up? Help, please!

    (Moved to programs)

    Hi Thom,

    I apologize for the delay in response. I suggest to follow the steps in the link below and check if it helps you.

    Follow the steps provided by M_Sion.

    https://social.technet.Microsoft.com/forums/Windows/en-us/3a6e2cfe-ef5b-4547-A832-946a3cc82e8e/Microsoft-Visual-c-runtime-library-runtime-error?Forum=w7itproappcompat

    Follow the steps provided by Srimadhwa B

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Microsoft-Visual-c-runtime-library-runtime-error/f32da816-d8a7-4B05-9975-b9f4144af62b

    Let us know the status of the issue, we will help you.

Maybe you are looking for

  • Why my web searches being scored as are encrypted

    I have extreme difficulties with my email and honestly I don't know what happened; but six times in the last 4 hours then search Microsoft for answers to help my problem. I received a warning that I'm going in "encryption" and wants to know if I want

  • Photo tray stuck

    error message 'the photo tray blocked' to come on my c310; no paper, no blocks, stuck tray - all solutions for what he can back into operating position.  have you tried the hard reset and the issue has not been resolved

  • Skype phone number ID

    My Skype caller ID is a phone number, I did more. How can I change this identification number of a phone number that I have?

  • Equium M70: The keyboard does not work

    I have a problem with my keyboard. The letters M, J, U, 7 do not work. I had intermittent problems until this morning, which were easily resolved by restarting: now there is nothing NADA. This came at a very bad time - I have a huge presentation tomo

  • Capture a sample only after analog triggering on a PXI4461 in Labview SignalExpress

    -Repost on LabView forum where this thread belongs. Hello I capture two waveforms (external excitations) with my PXI446, one on each HAVE. I use one of them as an analog trigger (rising edge @ some tension), let's say AI0. I need the value of AI1 on