Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

Similar Questions

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to make a background Center with the rest of the content?

  Hello world

  I was wondering if I could pick your brains! I am new to Dreamweaver, I was taking a course in this and I wanted to see how much I've learned by creating a fictitious Web site.

  I wanted to create a Web site with a background image in it and it brought. Now, I can get everything in the body toward the Center but not the image, so when I check in the browser, the background to the left image stays, while the rest of the site is moving with the browser window as it should. I tried many things to fix this problem and the fear that I have created a mess with the code! Please could someone point me in the right direction?

  I thought I'd post the code here, hope this is ok?

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  < title > Untitled Document < /title >

  < style type = "text/css" >

  {body

  background-image: url(assets/images/Business%20Men%20In%20Reception%20Col.2.jpg).

  background-repeat: no-repeat;

  background-color: #003;

  margin-left: auto;

  margin-right: auto;

  position: relative;

  width: 960px;

  }

  #header {}

  margin-left: auto;

  margin-right: auto;

  position: relative;

  width: 960px;

  }

  {#heading}

  are-family: Georgia, "Times New Roman", Times, serif;

  are-size: 36px;

  make-style: italic;

  are-variant: normal;

  margin-left: auto;

  margin-right: auto;

  }

  {#bodytext}

  are-family: Georgia, "Times New Roman", Times, serif;

  are-size: 18px;

  line-height: 25px;

  are-variant: normal;

  width: 300px;

  }

  #container {}

  width: 960px;

  position: relative;

  margin-left: auto;

  margin-right: auto;

  }

  {.rightimg}

  float: right;

  margin left: auto;

  padding-right: 40px;

  }

  #heading #navbar ul li {}

  padding: 30px;

  }

  < / style >

  < script type = "text/javascript" >

  function MM_swapImgRestore() //v3.0 {}

  var i, x = offline. MM_sr; for (i = 0; a & & I <.) Length & & (x = a [i]) & & x.oSrc; i ++) x.src = x.oSrc;

  }

  function MM_preloadImages() {//v3.0

  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();

  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)

  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}

  }

  function MM_findObj (n, d) {//v4.01

  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}

  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}

  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];

  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);

  If (! x & & d.getElementById) x = d.getElementById (n); Return x;

  }

  function MM_swapImage() {//v3.0

  var i, j = 0, x, a = MM_swapImage.arguments; document. MM_sr = new Array; for (i = 0; i <(a.length-2); I += 3).

  If ((x = MM_findObj (a [i]))! = null) {document. MM_sr [j ++] = x; if(!x.oSrc) x.oSrc = x.src; x.SRC = a [i + 2] ;}

  }

  < /script >

  < / head >

  < body onload = "MM_preloadImages (' assets/images/home 2.jpg','assets/images/contact2.jpg','assets/images/Terms 2.jpg')" >

  < div id = "header" >

  < div id = "body" >

  "< p > < img src="assets/images/header-1.jpg "width ="920"height ="133"alt ="header"/ > < / p >

  "" "" "< p > < a href =" # "MM_swapImgRestore" onmouseover = "MM_swapImage (" self "", ' assets/images/home 2.jpg', 1) "> < img src="assets/images/home.jpg "alt ="Link to the homepage"name ="Home"width ="303"height ="32"border ="0"id ="Home"/ > < /a > < a href =" # "MM_swapImgRestore" onmouseover = "MM_swapImage (" contact us "," ' assets/images/contact2.jpg',1) "> < img src="assets/images/contact.jpg "alt ="Link to the contact page"name = width 'Contact us' = '299' height =" 32 " "" border = "0" id = "Contact us" / > < /a > < a href = "#" MM_swapImgRestore "onmouseover =" MM_swapImage ('Conditions', ", '2.jpg', 1 assets/images/words)" > < img src="assets/images/Terms.jpg" alt = "Link on the business terms" name = "Terms" width = "311" height = "32" border = "0" id = "Terms" / > < /a > < /p >

  < / div >

  < / div >

  < div id = "topic" >

  < p > welcome < img src = "assets/images/Man In suit crop.jpg" alt = "Man in a suit" width = "281" height = "220" class = "rightimg" / > < / p >

  < / div >

  < div id = "bodytext" >

  < p > here at Alexander Head & amp; Co Ltd that our goal is to provide business service levels, they used to enjoy before the time of consolidator. With the insurance market changes so quickly and more provincial brokers being supported by large organizations, levels of service personnel are disappear. We offer you this service and always offer him < br / >

  competitive premiums that you deserve. Read about < /p >

  < / div >

  < p > < img src = "Images/assets/young businessmen crop.jpg" alt = "young business people" width = "282" height = "216" class = "rightimg" / > < / p >

  < / body >

  < / html >

  Kind regards
  Dave

  Add to your body rule

  background-position: center;

  Gary

• How fix a screen upward with the OS lock, check the point 9.2 on 4S

  How can I solve on iphone4s "update check" screen lock to IOS 9.2.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• Download pirated Windows XP Media Center with the genuine key?

  Hi all

  First of all, I apologize if the thread, I created is in the wrong place (Technet forums), but I got enough good help from technet on a Windows 7 problem, that I had. I've recently updated to the Genuine Windows XP Media Center to a genuine Windows 7 Professional.

  I own a HP pavilion laptop came pre-loaded with XP MC (media center). Now, HP does not record with the laptop, instead, there is a recovery partition which can be transferred to DVD to create additional space on the HARD drive, I did. Unfortunately my DVD player no longer works, and I can not restore my XP to factory settings (new facility) because the HP restore software only reads from the DVD.

  This XP has become bloated over time, and I want to do a new installation.

  It is, I could download a pirated copy of the media center XP SP3 and use my real serial number and / or additional information to activate it?

  Thank you

  No, because your key is specific to an HP facility.
  Replace your DVD player or buy an external hard drive

• [SOLVED] Help fixing 'file two systems with the same uuid were detected.

  I have a Setup ESXi embedded (installed on a USB key connected to the internal USB port) on a Dell T710 with few of the SAS drives.  I tried the upgrade to 4.0 - 294855 to 4.1 - 348481 by following the instructions here via:

  esxupdate--bundle=/vmfs/volumes/datastore_name/path/to/upgrade-from-esxi4.0-to-4.1-update01-348481.zip update

  Even if it is done correctly, when I restarted I got a purple screen with this message on this subject:

  The system has found a problem on your machine and cannot continue.

  Two systems with the same UUID files have been detected.  Make sure that you do not have two installations of ESXi.

  So, he tried to update one of the SAS drives internal versus inside USB key...?

  I studied this time before & found a threadwhere posted to help, but it wasn't enough to get me going.  Tonight, I found KB1035107 which details how to fix this, but I have a few concerns:

  • How can I identify the drive that has the invalid ESXi installation?
    
  • Better yet: How can I identify who / disc is the one with the ESXi installation I want to keep?
    
    • I know that I can use esxcfg-mpath-l., esxcfg-mpath-band esxcfg-scsidevs-l to collect the disk & LUN information.  But what happens if it wasn't a built-in installation?  If ESXi was installed on one of the SAS drives, how could I confirm which drive it actually installed on?
      
  • What is the worst that could happen with the performance he commands in the KB above?
    
    • Do I need to worry about migration whatever data is stored elsewhere there until I can get through this?
      

  Finally, and perhaps more important than these other issues:

  It is for me a way to specify which disk/drive/device to target when executing upgrades, more precisely from 4.0 to 4.1?

  How can I perform upgrades in the future without having to worry about this nonsense?  I don't want to have to disconnect from the LUN/warehouses of data whenever there is an upgrade (major or minor).

  
  Thank you very much.

  Did the HD with the data store show other partitions if your running fdisk-l?

• Text of Center with the image next to it.

  I want to have a centered text and just to his left a picture which is an icon.

  I'm sure that's a very basic question, but while I can understand a few methods which almost achieve this, im not sure of the right way to do it.

  Can I Center the text with text-align: center, but this is not applied to the image.

  I can make the text in a div with padding on the left equal to the width of the image, and then set the image as a background image that appears on the left. I can then use margin: auto to center the div, but only if I specify a width for the div If I do this, then the text is not exactly centered on the page. If I do the fairly large div and add text-align: center, then the text is centered, but the image is not always in the right place.

  Is there a solution?

  Thank you

  Hello

  Yes, the solution was obvious, and it was only when I was witting that I realized that I had been focused on centering the text with an image to the left and not with an image just to the left of the text, sorry my mistake!

  What I usually do to allow resizing of the text is to allow for a value up to 150% of my setting specified in the design police (not always possible, but I'm trying!), and anything above that allow the text overflow-spaces for this: nowrap; a rule that I had in the #header css rule.

  PZ

• Embedded audio player doesn't work with Firefox in a laptop computer, but works fine on a PC. How can I fix? It started with the new design of Firefox.

  This problem apparently only occurs with the audio player built into http://www.theskepticsguide.org/ . I tried other embedded audio players from other websites and they work fine. In the Firefox installed in my laptop, no matter what I do it does not play the SGU podcast. When I try to click on the download option it says "Video cannot be read because the file is corrupted. However, I can play and download the podcast without any problem with Firefox installed in my PC, which is the exact same version that is in my laptop, so I don't really know what could be the cause.

  I remember that this was not the case before the new design of Firefox. I tried the solutions proposed on this problem before asking this question. I checked that the plugins are up-to-date. I removed all the addons and plugins, and this did not help either. Firefox reset with no luck. Also tried a fresh install of Firefox and it didn't work. I used the laptop without synchronization first, and then synchronize with no difference. Flash is up to date and there is no apparent problems there.

  Maybe it's a codec missing or damaged? I wouldn't trust codecs from sources other than Microsoft for this purpose, since Firefox tries to use Windows to read the file.

  If you decide to give up and around the native player for a plugin, these changes of settings usually work for this:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the filter box, type or paste media and make a pause so that the list is filtered

  (3) [except XP], double-click on media.windows - media - foundation.enabled to change its value from true to false.

  (4) double click on media.directshow.enabled to change its value from true to false.

• SQL query with the troubleshooting Subselects

  I have a query with the 3 Subselects. Each of the Subselects works very well on its own. I run the query in Oracle SQL Developer and get ORA 933 "sql command not completed successfully" at 47 48 line pass. I am unable to say what is causing the error. The pointers you know sincerely!
  
  Here is the code:

  SELECT 
    adjud.country,
    adjud.site,
    adjud.prodtype,
    sum(adjud.acount) + sum(denied.dcount) as TotalClosed,
    case when adjud.adtype = 'Paid' then adjud.acount End as NumPaid,
    case when adjud.adtype = 'Paid' then adjud.totalpaid End as AmtPaid,
    count(adjud.contest) + count(denied.contest) + count(pend.contest) as CntContestable,
    sum(pend.pcount) as PendingCount,
    Case when pend.overunder = 'Over' Then count(pend.pcount) End as Over90Count,
    sum(pend.facevalue) as PendingAmount
  From 
  ( select 
      count(clm.clm_nbr) as acount, 
      sum(clm.rsrv_amt) as facevalue,
      sum(clm.tot_pd_amt) as totalpaid,
      clm.prdt_type_nm as prodtype,
      clm.cntsbl_indc as contest,
      case when clm.exam_co_cd in ('107','134')
        then 'Hong Kong'
        else 
          case when clm.exam_co_cd = '234'
            then 'Singapore'
            else 'US'
          End
      End as country,
      clm.exam_admin_site_cd as site,
      Case when clm.rmk_cd in ('R00', 'R01', 'R02') then 'Denied' Else 'Paid' End as adtype
    from afp_cds.claim_vw clm
    where 
      clm.adjud_dt is not null and 
      clm.adjud_dt > :startDate and
      clm.adjud_dt < :EndDate
    group by 
      clm.prdt_type_nm,
      clm.cntsbl_indc,
      case when clm.exam_co_cd in ('107','134') 
        then 'Hong Kong'
        else 
          case when clm.exam_co_cd = '234'
            then 'Singapore'
            else 'US'
          End
      End,
      clm.exam_admin_site_cd,
      Case when clm.rmk_cd in ('R00', 'R01', 'R02') then 'Denied' Else 'Paid' End
  ) as adjud, 
  ( select 
      count(clm.clm_nbr) as dcount,
      sum(clm.rsrv_amt) as facevalue,
      clm.prdt_type_nm as prodtype,
      case when clm.exam_co_cd in ('107','134') 
        then 'Hong Kong'
        else 
          case when clm.exam_co_cd = '234'
            then 'Singapore'
            else 'US'
          End
      End as country,
      clm.exam_admin_site_cd as site,
      clm.cntsbl_indc as contest
    from afp_cds.claim_vw clm
    where 
      clm.deny_dt is not null and
      clm.deny_dt > :startDate and
      clm.deny_dt < :EndDate
    group by
      clm.prdt_type_nm,
      case when clm.exam_co_cd in ('107','134') 
        then 'Hong Kong'
        else 
          case when clm.exam_co_cd = '234'
            then 'Singapore'
            else 'US'
          End
      End,
      clm.exam_admin_site_cd,
      clm.cntsbl_indc
  ) as denied,
  ( select 
      count(clm.clm_nbr) as pcount, 
      sum(clm.rsrv_amt) as facevalue,
      clm.prdt_type_nm as prodtype,
      case when clm.exam_co_cd in ('107','134') 
        then 'Hong Kong'
        else 
          case when clm.exam_co_cd = '234'
            then 'Singapore'
            else 'US'
          End
      End as country,
      clm.exam_admin_site_cd as site,
      clm.cntsbl_indc as contest,  
      case when sysdate - clm.regtrtn_dt > 90 then 'Over' else 'Under' End as overunder
    from afp_cds.claim_vw clm
    where
      clm.adjud_dt is null and
      clm.deny_dt is null
    group by
      clm.prdt_type_nm,
      case when clm.exam_co_cd in ('107','134') 
        then 'Hong Kong'
        else 
          case when clm.exam_co_cd = '234'
            then 'Singapore'
            else 'US'
          End
      End,
      clm.exam_admin_site_cd,
      clm.cntsbl_indc,  
      case when sysdate - regtrtn_dt > 90 then 'Over' else 'Under' End
  ) as pend
  
  where
    adjud.prodtype = denied.prodtype and
    adjud.country = denied.country and
    adjud.site = denied.site and
    adjud.contest = denied.contest and
    adjud.prodtype = pend.prodtype and
    adjud.country = pend.country and
    adjud.site = pend.site and
    adjud.contest = pend.contest 
  group by
    adjud.country,
    adjud.site,
    adjud.prodtype,
    case when adjud.adtype = 'Paid' then adjud.acount End,
    case when adjud.adtype = 'Paid' then adjud.totalpaid End,
    Case when pend.overunder = 'Over' Then count(pend.pcount) End

  Do not use "Sub" with the table alias.

  Change this stmt type:

  ) as adjud,
  

  TO

  ) adjud,
  

• Microsoft fix it solution center has begun Error Message: convenience store does not apply to your system

  The fix it solution has always worked before now. I can't even use the portable download when it finishes I get the error message. I am also the one who said it was not compatible with my current setup of the system. Please fix this for me.

  Hi Patricia,

  I suggest you to download the Windows Installer (. Windows6 0-KB942288-v2-x 86.msu) from the following Web site and check if it helps.

  Windows install 4.5 Redistributable
   

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sourcefire Defense Center with the new firepower of Cisco 7115

  Hi all

  I have a client who has DC3500 with 18 Sourcefire NGIPS recorded thereon.

  This customer needs to add additional 7115 NGIPS to the existing DC3500.

  My Question is, the 7115 to DC3500 new registration will be good or not?

  Best regards, Mohamed Amin

  Course - as long as you have the licenses to apply on the new sensor. The DC 3500 (now called Firesight 3500) is rated for up to 150 sensors managed (devices) and 300,000 guests/users.

• Fixed size thread pool with the exception of the additional tasks, then it must

  Hello
  I have the following code in a simple program (code below)
  
  BlockingQueue < Runnable > q = new < Runnable > ArrayBlockingQueue (10, false);
  NewPool ThreadPoolExecutor = new ThreadPoolExecutor (1, 10, 20, TimeUnit.SECONDS, q);
  
  for (int x = 0; x < 30; x ++) {}
  newPool.execute (new threaded());
  }
  
  
  My understanding is that this should create a pool of threads that can accept 10 tasks, once there were 10 submitted tasks I should get RejectedExecutionException, however; I see that when I run the code the pool accepts 20 run calls before launching RejectedExecutionException. I am on Windows 7 using Java 1.6.0_21
  
  Any thoughts on what I am doing wrong?
  
  Thank you
  
  -----
  
  
  java.util.concurrent import. *;
  
  public class ThreadPoolTest {}
  Public NotInheritable class threaded implements Runnable {}
  
  @Override
  public void run() {}
  System.out.println ("wire:" + Thread.currentThread () .getId ());
  try {}
  Thread.Sleep (5000);
  } catch (InterruptedException e) {}
  System.out.println ("Thread:" + Thread.currentThread () .getId ())
  "+"interuptted");
  }
  System.out.println ("output wire:" + Thread.currentThread () .getId ());
  }
  
  }
  
  private static int MAX = 10;
  private pool of the executor;
  
  
  public ThreadPoolTest() {}
  Super();
  BlockingQueue < Runnable > q is new ArrayBlockingQueue < Runnable > (MAX/2, false);.
  NewPool ThreadPoolExecutor = new ThreadPoolExecutor (1, MAX, 20, TimeUnit.SECONDS, q);
  
  pool = newPool;
  }
  
  
  
  /**
  @param args
  */
  Public Shared Sub main (String [] args) {}
  Object ThreadPoolTest = new ThreadPoolTest();
  object.doThreads ();
  }
  
  private void doThreads() {}
  int argued = 0, rejected = 0;
  for (int x = 0; x < MAX * 3; x ++) {}
  try {}
  System.out.println (Integer.ToString (x) + "sending");
  pool. Execute (new threaded());
  submitted ++;
  }
  {} catch (RejectedExecutionException re)
  System.Err.println ("Submission" + x + "rejected");
  rejected ++;
  }
  }
  
  System.out.println ("\n\nSubmitted:" + MAX * 2);
  System.out.println ("Accepted:" + subject);
  System.out.println ("rejected:" + rejected);
  }
  
  }

  Interesting, it seems to not dismiss after (size of queue + size of thread pool) supports.

  --
  In fact, it's not interesting. The queue is the buffer and the thread pool size is job tasks.
  He uses the thread pool, the rest first upward, puts it on the queue for a free thread. If both are filled, so there is no space and it rejects submit it.

  Published by: Kayaman April 4, 2011 20:39

• Windows 7-64 update fails with the error 800b0100 for KB3064209

  Repeat this "update and recovery" perhaps I posted in the wrong forum subdivision for assistance.

  I need help with this error. I ran FixIt and troubleshooting tool. FixIt stared at her, but the troubleshooting tool set certain elements and certain interpretations of left. The remains of the installation problem. I can not install KB3064209. Errors which remain and which are not fixed by troubleshooting tool are:

  • Missing or damaged service reg
  • Error 0 x 80070057 not set
  • Component Cryptographic Service not registered

  I don't know how to correct that elements. Any ideas?

  Thank you in advance,

  VIC

  Overtaken by events: win 10 installed successfully.

• Binary translation is incompatible with the long mode on this platform. Windows 7, processor intel core i5

  I install VMware Workstation 12.1.1 Player for Windows 64-bit operating systems on Lenovo intel core i5 Windows 7.

  I have a copy of VM for HP Quality Center with the VirXPSP3.vmx file and the environment.

  When I try to open the Workstation Player vmx file:

  (1) I got prompt that machine virtual seem to be an option to take possession and use

  2) after taking possession, I try to play the virtual machine, I got a prompt with "binary translation is incompatible with the long mode on this platform. Long mod will be disabled in the virtual environment and application requiring long mode does not work correctly as well. See http://vmware.com/info?id=152 for more details. »

  Link is on this page: system required to install an operating system 64-bit on a 32-bit host (1003945) client. VMware KB

  Host is definitely 64 so I'm puzzled with this is the case.

  (3) next step/guest is: "this virtual machine may have been moved or copied. I clicked on the button "I copied it".

  (4) the following message:

  Fatal error VMware Player: (mks)

  Exception 0xc0000005 (access violation) occurred.

  Log file is attached.

  Line 476 in the log file is:

  The following features of VT - x are necessary for the support of VT - x in VMware Player; However, these features are not available on this server:

  2016 06-07 T 13: 51:34.466 - 07:00 | VMX | I125: hostCpuFeatures = 0x217d

  In one of the previous installation, I did virtual Intel technology enabled in the BIOS after one of the responses of your forum. It has not removed the error.

  Just to clarify whenever I have uninstall I'm your site troubleshooting steps:

  (1) Uninstall using Add/Remove program of the program and features

  (2) run the installer with clean / change

  I do above steps as an administrator and restart after each step.

  On top I have delete the following folders:

  C:\Program Files (x 86) folder \Common Files\VMware

  File C:\ProgramData\VMware

  File C:\Users\Ivana\AppData\Local\VMware

  Files C:\Users\Ivana\AppData\Local\CrashDumps\vmware-vmx.exe.*.dmp

  File C:\Users\Ivana\AppData\Local\Temp\vmware-Ivana

  File C:\Users\Ivana\AppData\Roaming\VMware

  And delete the folder with the Virtual Machine for HP Quality Center.

  Do you know how can I fix a fatal error (mks)?

  The same installation works fine on HP with Windows 7, i.e. copy of VM for HP Quality Center is ok.

  Thanks in advance for your help.

  Usually, this is caused by outdated or incompatible graphics drivers on your host.  I expect that the latest drivers for your integrated Intel HD Graphics 4000 would be probably already delivered through Windows Update, however.  Could be interesting to see if there is an optional update in your Windows Update list to get a new graphics driver.

  Otherwise, you can try the problem by disabling 3D graphic acceleration: from the VM menu, select settings..., and then in the list of material , choose display.  Clear (uncheck) the box 3D graphic acceleration .

  I hope this helps!

  --

  Darius