Error "Failed to initialize the raid class" on Equium A100

Similar Questions

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "failed to initialize the Viewer...". »

  I am trying to display a CD Microsoft Office Specialist approved courseware for Excel 2003 and I get the following error

  "Failed to initialize the Viewer. If you installed the Viewer to your computer, rerun Setup. If you access the viewer of a server, contact your system administrator.

  General exception. "

  I tried to run the patch as described on this site in 2006 and the command has been executed but I still get the same message, even after reboot. Someone else recommended to rename one of the files windows32 but it won't let me do - it just keeps asking me to try again. It was previously posted in MELL (Microsoft E-learning library).

  It comes with Vista, upgrade install and activate Forum.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your questions Excel in the Office discussion groups above.

  At soon Mick Murphy - Microsoft partner

• Impossible to install physx for Mass Effect 3. Error failed to initialize the physical system.

  Original title: fatal error install physx even after using the shortcut and adding / quiet to the target

  I tried to install physx to play Mass Effect 3. However a pop-up message and the installation has ended

  "Unable to initialize the physics system."
  "Please make sure you have a version installed PhysX system software update."
  After reading some posts online, I created a shortcut as
  C:\Users\USER\Desktop\PhysX-9.12.0613-SystemSoftware.msi/quiet
  Yet, nothing happened, the program file was not a folder named Nvidia, the games always says it cannot start because it is impossible to activate his physical flow...

  Hi Javier Wong,

  1 did you do changes on the computer before the show?

  Method 1:

  Put the computer to boot and then try to install the software.

  Step 1: Clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Step 2: Uninstall the earlier version of the software

   

  See the following site:

  Uninstall or change a program

  http://windows.microsoft.com/en-us/windows-vista/Uninstall-or-change-a-program.

   

  Step 3: Install the latest version of the software

  See the following site:

  NVIDIA PhysX System Software

  http://www.nvidia.com/object/physx-9.12.0613-driver.html.

   

  Method 2: Download and install the latest graphics Driver

  Install the latest graphics driver.

  You can consult the site mentioned below:

  NVIDIA driver downloads

  http://www.nvidia.com/Download/Scan.aspx?lang=en-us.

• Error: failed to initialize the audio chip on each start - the application will be closed.

  Title: to fix up the initialization of the audio chip

  Hello

  refer to my previous question.  my previous net framework issue is resolved. but now every time you start massage just that - could not initialize smart audio, the application will be closed.-. So how to solve this problem?

  Thank you.

  Hello. I found the solution for this!

  Just disable all other audio drivers from your device manager
  1. go to the Device Manager
  2. click on "audio, video and game controllers".
  3 disable the choises except "Conexant SmartAudio HD" below.
  4. re-start.
  This has worked for me and sorry for my bad English!
  Hope I helped :)

• Get the below question "internal error - failed to initialize the driver of the NLS in a load"

  
  Hi all

  in my project I use the odbc driver with the version as "11.02.00.01" with the 32-bit version, I use the oracle 11g. If I try to connect to my odbc driver, I get the point above.

  for the above, I tried the following, by setting the NLS_LANG in the variable environment, but it does not solve the problem.

  can someone let me know what Miss me?

  Thank you

  1388a329-e0f1-473D-8b00-83cab52824ea wrote:

  Hello

  Thanks for your reply.

  can you please let me know what is the root cause?

  Thank you.

  Why do you need ODBC to connect to Oracle?

  Do you realize that I'm not standing behind you.

  I don't know what you post.

  Actually, you said similar to below.

  my car does not.

  Tell me how to move my car.

  You have not yet posted version or name of the operating system.

  ODBC is misconfigured.

  No one knows if you have error of commission (doing something wrong) or error of omission (not doing something that needs to be done).

  What kind of error do you have?

• Failed to initialize the installation program. Error 110. On Windows XP.

  Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:

  Failed to initialize the installation program. Error 110.

  I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?

  Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:

  1. reboot Windows XP in Safe Mode
  2. double-click on the Setup program to start the installation process
  3 cancel the installation process after it starts
  4. restart windows in normal mode

  Now, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.

• Get the error message 'Failed to initialize the DirectSound8, please check drivers' error when running instructor of typing for kids v4

  Original title: Typing instructor for kids v4

  I'm having a problem running instructor of typing for kids on my Win7 64 bit OS.  The program starts fine, but when none of the subprogrammes are launched, I get a: error "unable to initialize the DirectSound8, please check drivers."

  Anyone has any ideas how to solve this problem?  I already installed DirectX8 and 9 c with no positive result...
  Thank you!
  John

  Hello

  Try the steps below and check if they help to resolve the issue.

  Step 1:

  Uninstall and reinstall the application typing instructor for kids v4.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Step 2:

  Perform a disk cleanup.

  The disk cleanup tool lets you free up space on your hard disk by searching your disk for files that you can safely remove. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  Start disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/start-disk-cleanup

  Step 3:

  Perform the update of Windows.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

   

• Error: failed to initialize DirectX when you try to play a game on windows7, which worked well on Windows Vista

  When I reinstalled the game "Anno 1404" I get the error "failed to initialize DirectX. The game worked perfectly on windows vista, but I changed to windows 7. I already reinstalled directX, but the message keeps popping up. What can I do?

  
  

  My laptop is a HP pavilion dv2000

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to initialize the DFX audio enhancer

  original title: DFX audio enhancer and Windows 7 compatibility issues

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.
  Update downloaded DFX and now receive an error message stating:
  "Failed to initialize the DFX.
  Please reinstall DFX.
             

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.

  Update downloaded DFX and now receive an error message stating:

  "Failed to initialize the DFX.

  Please reinstall DFX.

             

  Hello, Steve.

  See if that helps

  Internet Explorer 9 may stop responding if the DFX Audio Enhancer is installed http://support.Microsoft.com/kb/2727797/en-us?SD=RSS&SPID=15672 Alternatively, you can try to install using compatibility mode. http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f Contact technical support DFX http://www.FXsound.com/

• ORA-01804: failed to initialize the zone in DB11.2.0.4 information

  Dear Experts,

  I installed Oracle DB 11.2.0.4 to upgrade my current DB 11.1.0.7 to 11.2.0.4.

  When I try to connect to the DB I get the following errors

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  SP2-0152: ORACLE does not work properly

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  
  

  SP2-0152: ORACLE does not work properly

  
  

  I use Oracle linux 86 and I installed the R12.1.1 application.

  
  

  Kind regards

  
  

  Ahmad,

  
  

  
  

  
  

  I found the solution in this Doc ID 1562424.1

• installation of flash player error failed to initialize

  I have reviewed the messages of the forum about this error, tried the suggestions and still can't get the flash player to install. And... by uninstalling my previous version, in accordance with the instructions, I now do not have... and am very frustrated. Help, please. I have Windows XP and IE8. I checked that the minimum system requirements are ok.

  View Post:

  November 4, 2011 21:07

  Installation of errors "failed to initialize."

  Answer/response there is a link that worked for me and I had the same problem.

• MapBuilder.jar: failed to initialize the appearance: null

  When I try to start mapbuilder using java-jar mapbuilder.jar it crashes:
  
  Failed to initialize the appearance: null
  error: java.lang.NullPointerException
  
  Running 64-bit Linux in a VNC session.
  
  Anyone else seen this?
  
  JAVA_HOME is set.

  Try to use a version of bit java32 (minimum jre 1.5 or later), and to give the full path, I don't know a lot of Linux.

  See you soon
  Nico

  Published by: gerardnico on August 26, 2009 22:26 Add jre 1.5 or later

• Failed to initialize the Application example in Hyperion Planning

  Hello
  
  I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
  
  I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
  
  I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
  
  When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [1200497] discovered in the formula of Member for "411100" members
  Error [1200497] discovered in the formula of Member for "412100" members
  Error [1200497] discovered in the formula of Member for members "412200."
  Error [1200497] discovered in the formula of Member for "451000" members
  Error [1200497] discovered in the formula of Member to Member "501111".
  Error [1200497] discovered in the formula of Member to Member "501112".
  Error [1200497] discovered in the formula of Member to Member '501130.
  Error [1200497] discovered in the formula of Member to Member "501240".
  Error [1200497] discovered in the formula of Member to Member "501250".
  Error [1200497] discovered in the formula of Member to Member '511200.
  Error [1200497] discovered in the formula of Member to Member '511300.
  Error [1200497] discovered in the formula of Member to Member '511400.
  Error [1200497] discovered in the formula of Member to Member "511500".
  Error [1200497] discovered in the formula of Member to Member "511600".
  Error [1200497] discovered in the formula of Member to Member '511700.
  Error [1200497] discovered in the formula of Member to Member '511800.
  
  What should I do to get this application example upwards and running so I can see what he does?
  How to initialize the sample application?
  Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
  
  -Scott

  Hello

  If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.

  You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• During installation, download "error!" Cannot initialize the plug-ins directory.

  Has started having problems when opening Firefox and trying to make Firefox the default browser. Windows 7 update and update AVG virus scan clean, updated MalwareBytes and scan clean. Troubleshooting finally brought me to uninstall and try for a clean install... normal Windows 7 uninstall process successful. Is that Firefox folder in "Program Files" has been deleted. Download "DownloadApp_1_7_5_198_Setup" (29 442 KB) of the Mozilla Web site and run... "error!" Cannot initialize the plug-ins directory. Please try again later. »

  http://www.bleepingcomputer.com/forum.../error-cant-initialize-plug-ins-directory-please-try-again-later/
  What are the permissions on your Temp folder?

  Look to see if there are a few cases on this point, brb.