ERROR FATAL Service Pack 2 / GLITCH

Similar Questions

• I tried to down load service pack 2, I got error. install service pack 2 regsity step could touch save.

  What can I do to solve this problem with the installation of service pack 2 or the registry key.

  Assuming VISTA Service Pack 2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error installing Service Pack 3 on XP because of the "disk space" despite 40 GB free

  Well, I was working on the installation of some programs for my school (ProE Wildfire 4.0) and to run it, we required some software VSP. When you try to run the software, it gave me errors on missing components and when he tried to download, it gave an error. So I decided to do a Windows Update for I hope to solve this problem and tried to install Service Pack 3 (this a bootcamp partition on a Mac, unfortunately, everything works great on my desk), who was absent, probably because I installed XP only a few months ago. However, whenever I tried to install the service pack, it gives me an error, saying: it took 4 MB more disk and cancel the installation. I got 40 GB free, so I just did a virus scan of the entire system with Symantec and Spybot S & D. Then I made the error of disk checking, defragmentation, disk cleanup, cleanup with CCleaner and cleanup with CleanUp!. And he always gave me the same error. During this time, I realized that Microsoft Security Center was not picking up on my Symantec Antivirus. I had a virus earlier and thought that Spyware S & D and Symantec may have missed something, so I did some research and took measures to protect themselves against a little guy called backdoor.haxdoor.cn. Apparently, I was not according to HSfix and HijackThis. So I thought that Service Pack 2 might have poorly installed and messed up the Security Center and my chances of installation of Service Pack 3. But when I went into Add/Remove Programs (w / visible updates), I couldn't find the upgrade to Service Pack 2 anywhere, that brought me to believe he was present on the XP cd, I have installed since. So I tried to take a break for Service, removing the repository, and then by him restarting. That no longer works. So I gave up on the antivirus error causing the service pack 3 error idea and tried to do some research on service pack 3 generally, but I couldn't find anything really relevant. And now I don't know what to do anymore. Any help would be appreciated.

  silentearth3,
  Well, it sounds as if there are a lot of things with your computer.  The first thing I would say is to clean your system startup and then try runnings Windows updates.  Make sure you have any antivirus or firewall programs that may interfere with Windows Update.
  Here are the instructions for the clean boot: http://support.microsoft.com/default.aspx/kb/310353

  If you still have a question I would then download SP3 to your desktop and try to install from there.  Here are the instructions on how to manually install SP3: http://support.microsoft.com/kb/322389/

  Let us know the results of these steps.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SP2 error: "the Service pack installation cannot continue.

  Hello

  Hope someone can help with this.

  When I try to install SP2 I get this message "the Service pack installation cannot continue - is missing one or more components of the system which requires service pack."

  My computer is a Dell Studio 1737 laptop came with Vista Premium 64 bit OS. Received 3 months ago.

  Last week, I got a blue screen while making a rescue disk (I know, it's ironic), computer was slow, so I tried to do the system restore. System Restore does not work (I installed SP2 in fact at the moment, no problem). Looked for the solution, only thing I could find was to re - install OS repair mode (upgrade).

  Found some info on VLite (knew, it has not been accepted by MS). Did the repair installation with VLite, added updates and drivers, took only some of the great language files. Load and run fine, ran all updates to windows. When I tried to install SP2, I got the "Service pack installation cannot continue - one or more components of the system that requires the service pack are missing. Looking for solutions, concluded the MS 'this may be due to the installation of VLite"only resolution is to re - install with OEM disc.

  If that's what I did, re-installed, (repair - upgrade), once again. Load and run fine, ran all updates to windows. When I tried to install SP2 I got the "Service pack installation cannot continue - is missing one or more components of the system which requires service pack"-NEW.

  I have:

  -tried several times

  -uninstalled VLite (of fat)

  -Disabled antivirus, Norton 360

  -Downloaded the standalone KB948465 - X 64

  -guarantees for KB955430 and all updates were installed

  -Ran "reset windows update components.

  -Re-installed "Windows updater.

  -We searched MS forum and Web site for help, can't find anything on the message of"missing components".

  -Ran "System tool" KB947821

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6001.22375

  Package, Version 5.0

  2009-06-02 23:00

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.

  Verification of the packets.

  Control components store

  Summary:

  Seconds executed: 1815

  No error detected

  Still won't install, get the same message.

  Can someone give any additional suggestions or a place to look for this problem.

  Other that this question, the computer is running great.

  Thanks for any help,

  Kind regards

  Dave

  Hi Dave,.

  It's here: http://support.microsoft.com/kb/968279

  Good luck!

  Cheers, Mohan | If your questions are answered, please come back and score the reply as an answer while others may use it.

• Error installing service pack 2 unable to read or write in the database

  I had to reformat my computer and when you do updates, I can't upgrade to windows service pack 2. The error message says "Service Pack 2 Installation Error-failed to read or write to the database." I tried the solution that I found that told me to stop the cryptographic services, go to the CatRoot32 file and remove the Edbxxxxx.log file but when I open the file there is no log file for me to remove it. I reformatted before and never had this problem. Any help would be appreciated, thanks.

  Better to start again from scratch. This time, follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Repost: The computer must not be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• 800F0900 error Vista Service Pack 2 download problem

  I am unable to download Vista Service Pack 2. Tried auto and manual download. Every attempt after a short time to download, the error 800F0900 rises. This is the only download that I got this problem with. I had originally a free version of McAfee, but in recent years, I have a paid version which is still topical. Any help would be appreciated. Ted B

  The 0x800f0900 error code represents an error of parser internal XML (CBS_E_XML_PARSER_FAILURE).

  Troubleshooting steps: -.

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  http://support.Microsoft.com/kb/947366

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  FYI

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• FAILURE TO INSTALL UPDATES FOR VISTA ERROR - MS SERVICE PACK 4 - 663

  I'M USING THE VISTA OPERATING SYSTEM - CAN NOT INSTALL MICROSOFT SUITE SERVICE PACK4 - ONLY GIVE 663 ERROR MESSAGE - THE PROBLEM WAS APPEARING FOR ABOUT A MONTH NOW AND HAS DETERIATED THE COMPUTER PERFORMANCE - A TI BOTHERS ME A LOT

  Hi Helen,

  Your question that about installing SQL Service Pack 4 would be best handled by experts in the Forums Pro Windows Vista IT please post your question here .

• where should I go to solve this error code service pack 8024200d problem

  I get this alert 8024200d it tells me to go to the information management center to solve the problem. Where should I go?

  To resolve this problem, use the following methods in the order in which they are presented.

  Method 1: Run (Checksur.exe) system update readiness tool

  1.	Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the tool Checksur.exe

  Here is a link to download and install the system update readiness tool:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0435684b-8d12-4028-9cb0-b2903257f1fd&displaylang=en

  If this does not work, you can try to download the update manually, and then install it.

  Here is a link to download the update:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7d72f845-9feb-4685-a669-f9d6ab54f9ed&displaylang=en

  Try these steps and let us know if it works.

• Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  original title: errors for Service Pack 4 Windows Vista update - error code 643 and D59 - I do not KNOW WHAT to DO!

  Windows Vista Service Pack 4 upgrade errors - Error Codes 643 and D59

  I DON'T KNOW WHAT TO DO!  I tried what he suggested, but cannot cross the error codes!  I am upset and frustrated because I can't work with the internet without slowing down.  I then close, only to have start all over again EVERY time!

  My internet keeps acting like dial upward because of this and I have cable internet!

  Help, please!

  This day SP4?

  Only in appropriate cases:

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Just in case where it is .NET Framework 4 -

  You can try the case just only repair the .NET Framework versions affected, especially if only .NET Framework 4 is involved.

  To repair the .NET Framework 4 Client Profile or .NET Framework 4 extended etc. -.

  • Click on start/Orb and click on Control Panel.
  • Go to the program and features.
  • Locate the Microsoft.Net Framework 4 Client Profile or .NET Framework 4 extended, right-click.
  • You should have the choice to repair or uninstall/change, click it.
  • This will then give you the opportunity to fix it
  • Select the repair option.

• Problems to install Service Pack 1 for Vista

  Hello

  I'm running my computer on Vista Home Premium 32 bit only.

  I'll just say everything that happened to that meets anyone knows exactly what is happening. Recently, I received a few DVDs of the trial version of Adobe, who quickly, I tried to install. The installer says I need Windows XP Service Pack 3 or Vista Service Pack 1. I found this curious because I thought that I had installed SP1 long ago when it appeared on Windows Live Update. After checking, I discovered that I had not installed for some reason any. I watched in Live Update for download, but it wasn't there, so I came on the Microsoft site and downloaded the stand-alone version of the service pack. I have closed all the programs that I had running and run Setup. He got to halfway through the installation bar (first?) and has stalled for a while, then extended to the end of the bar and displays an error, which contained a link to this page: http://support.microsoft.com/default.aspx/kb/947366. I followed the steps in resolution 2 and downloaded system update readiness tool. I ran the installer, but it seemed just to stall for a long time, so I canceled and he run. This time I got an error before he began to install (Code: 0 x 80240009). I looked for a solution and came across this http://support.microsoft.com/kb/929833, with some people claiming it fixed.

  I followed the steps and restarted my computer and it is no longer displayed the error, but it just keeps stalling at the installation screen. I decided to see if I could find an alternative

  solution to the original problem with the Service Pack and came across someone who says that McAffee was responsible, which is the virus scanner, that I installed it on my computer. I disabled

  pretty well all of the program, as well as my firewall and restarted the computer again. I ran the installation but got the same error. I have reactivated my firewall and McAffee and now I'm

  at a loss on what to do next.

  To sum up; I can't install SP1 or system analysis tool and I need to.

  If you need more information, let me know.

  Thanks in advance

  Hello, Ember09

  This seems to be an invalid data error code, Service Pack 1 installer was corrupted when you downloaded it, try to download it once more and check if you get the error again.

  Download the stand-alone update: x 64 | x 86

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install service pack 4 Windows on Windows XP Professional Version 2002 Service Pack 2

  I have recently installed windows service pack 3 and now when I try to install service pack 4, I get this
  Error installing Service Pack 4:
  The version of windows that you are trying to install does not match the update you are trying to install
  My Info to the computer:
  Windows XP Professional Version 2002 Service Pack 2
  Toshiba

  Tecra

  Intel (R) Celeron (R) M

  processor 1.50 G

  No, it means that you are misunderstand any error message you see.  There is no service pack 4 for Windows XP.  All reputable antivirus meant for Windows XP software will install on Windows XP service pack 3.  If you have problems to install antivirus software, your computer may already be infected.

  You must install one antivirus resident program.  Do not install the Avast and AVG; Choose a.  You can have other anti-malware of on demand software.  The best of them is MalwareBytes AntiMalware (free).

  If you would like more information, please proceed as follows:

  1 display the full text, without paraphrasing, of any error message you get when you try to install a software of your choice.

  2. after the URL (link) of the Web site from which you downloaded the antivirus installation package.

  3. click on start, then run, then type the following command in the "Open" box and click OK

  Msinfo32.exe

  When the windows of Information System fills, click on edit, and then click Select all. Click on edit, then click on copy.  Then paste (CTRL + V), the copied data in your response here.

• Service Pack 3 has not finished click OK to undo the changes that have been made

  Internet Exolorer 8, service Pack2 installed.  Tent to download and install service pack 3 again, Error Codes: several years ago

  Not enough free space.  Free storage, Total currently 6.06 GB GB 32.3.  HP pavilion 551w.

  Error codes: 11/10/09 OX80070641, same code on 29/09/12

  04/07/13 code OX8024600

  Remove Service pack 3 and reinstalled several days ago:

  "Preparing for download.

  Backup of files

  SP3 backup file. CAB

  Backup registry

  Creation of Restore Points

  Download Service Pack 3

  The initialization of the made installition

  Win SP3 installation

  SP3 Setup file. CAB

  Error installing service pack 3 Service pack 3 installation did not complete.

  Select 'OK' to undo the changes that have been made.

  Access denied»

  Firewall and anti virus disabled for installation.  Graphic bar showed about 75 to 80% installation complete.

  So far I have not checked to undo changes.  With the od SP3 download I show 5.82 GB of free space.

  As I have not checked to undo the changes, no error code appears for this latest attempt to download and install SP3.

  When you try to install Windows XP Service Pack, you receive the error message "Access denied" or "installing the Service Pack has not completed"
  http://support.Microsoft.com/kb/949377

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Error message when you try to install Windows XP SP3: "you don't have enough disk space on % lecteur_systeme % to archive the uninstall files.
  http://support.Microsoft.com/kb/949375/

  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384/

• service pack 1 and 2 for vista Home premium.

  error with service pack 1 and 2 for vista Home premium. INSTALATION failed to update. Error CODE 80070490

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error - Windows needs to continue Setup could not be installed during the upgrade to Service Pack 2.

  Original title: computer locked up on upgrade to xp p2.

  I've been upgraded to xp p2 to p1 and the computer gave me a fatal error - one of the components of Windows needs to continue Setup could not be installed - how do this and to the computer.  I tried safe mode, but it kicks me back to the same screen

  Hi jodyjones,

  You can use the automatic recovery feature to recover your computer to its previous configuration. For more information, follow this link & check if it helps.

  How to use the automatic recovery feature to recover your computer or your Tablet PC if the Windows XP Service Pack 2 Setup program is not completed successfully

  
  Reference: installation of the Service Pack 2 (SP2)

  Hope the helps of information.
  Please post back and we do know.

• Error install Vista Service Pack 2 and the incompatibility of Realtek

  I just want to inform you that service pack 2 install gave me an error message when I installed it on a clean rebuild of my PC Toshiba laptop. Something about an incompatible driver. As I had already installed the latest drivers Toshiba pages, I chose the action 'ignore and continue' to install and the update has been completed successfully.

  I then ran the utility Advisor upgrade of Windows (search just a Microsoft Web site to find) that checks the hardware/driver with Vista.

  Their report indicates that the card Realtek RTL8187B wireless network driver has a problem with Vista and recommends to install the latest version of the driver. Since I do not have the latest Toshiba driver installed, what is the procedure to follow?

  The WiFi with this computer functions laptop, with the only "problem" being a second 45 delay to the awakening of the mode shall be able to open a new web page. This is the time it takes to establish a connection to a router/modem.

  > Their report indicates that the card Realtek RTL8187B wireless network driver has a problem with Vista and recommends to install the latest version of the driver. Since I do not have the latest Toshiba driver installed, what is the procedure to follow?

  You can try the page of the Realtek driver Realtek WLan driver.
  There you can find the latest Realtek drivers for different chips Realtek.

  But to be honest, I wouldn't be worried about this massage.
  Something like this can happen after all installations of Microsoft service packs.

  I remember that many pilots have not been substantiated by SP1 but they ran correctly

  So take it easy ;)