error GE force 9500 GS

Similar Questions

• Dijit - error code 1

  Hello everyone - you get an error code when you try to use this app? I love this app, but it no longer works. I did two facotry resets and it did not fix the problem. Any ideas? See the screenshot below. My Version is 0.9.59 for the application. It is updated on the game store. I don't know if I should find a version update and sideload it?

  Thank you - Michael

  I get this same error or force close everytime I use the remote control. I tried the resets to the factory and had some success run in the past, but lately, it does not help. Most of the time, the buttons on the remote control do not appear on the screen. I think the last update in June made produced at the factory reset no longer works. If you are able to find that an updated version please let me know.

• Equium M50-244 run the Stop error after DVD playback

  If anyone can help with tips here. All watching my laptop DVD crashes with a runtime stop error which forces a closing down of the system. It's then a capricious beast in reverse that the screen remains blank and does not start start. When it decides to launch it is slow at the start and has on occasion crashed again. Report error screen Windows indicating that this is a MISTAKE STOP RUN is launched. On the game, the system slows down considerably, which means that next time I want to spend on the laptop should I go through t - he or she does not start into a nightmare. This is starting to get a little boring

  Hello

  With RUN the STOP ERROR do you mean the blue screen of death (BSOD) or what?
  What DVD player program did you use?
  Have you tried using different applications such as WinDVD or PowerDVD?

  However, I think that we should focus on the system slow downs.
  This could be caused by the high temperature if the temperature rises to a higher level, the system attempts to limit the performance of the processor.
  This reduced heat production, but slows down the performance of the laptop

  Overheating pourrait causes that the shut downs as s possible BSOD checks then perhaps you should try the cooling modules if they work at full capacity.
  Cleaning of the fan could probably contributes to

• How to force a refresh of the plot

  I'm trying to load some data from a text file and it draw 2 different contour (3d surface plots).  Inevitably, the first time that I load the file after that I open the VI, crass conspiracy does not refresh.  However, the plot very well done.  I don't know if it's a matter of timing of the completion of all the data of the file loading, or what.  I tried to re-wiring son error to force the sequence and tried sequential structures.  Nothing seems to work and I can't find a control for me to force him to cool off.  Anyone know what could be going on here?  I have included the 2 required VI and an example of text file.  Can someone help me out here?

  Thank you

  Chris

  Hi Chris,

  I ran your code with the enforcement tool point high (light bulb next to the pause button in the run menu - sorry if I've just insulted your intelligence, but not sure about your experience with LabVIEW). I noticed that the variables local just outside the structure of sequence would first update with values 0.0 then the code could perform the function of file as well as the previous code dialog box this feature. Given that local variables were called first in LabVIEW and updated with zeros as opposed to data acquired from your text file, the result is a track of course empty.

  When you run the code a second time, locals have since been updated with the correct values, which is why you get the plot.

  I have attached a screenshot and a .vi of my suggestions for what you can do to ensure the update of these local variables at the appropriate time and allow the data to chart at the interpolation of course in the first run. I hope that this solves your problem. If this isn't the case, please let me know.

  Also, I will take a lot of heat from other programmers out there if I did not at least mention that using multiple local variables throughout your .vi can be problematic in the sense that it can be difficult to properly manage the data flow and can lead to the frustration of troubleshooting. There are certainly better alternatives, but I thought you'd rather have a quick solution for now and worry not about cleaning up the code later.

  Hope this helps,

  Cory

• Error-2147352567 when you use save the vi report

  Hello

  I am developing a software test bench end line for a company. Everything was going well until I met an unexpected error which I don't understand. My code works a simulation engine and stores data in two excel files. When I have the path disconnected to save the report to the File.vi (screenshot 1), my program works without problem and records one of the files and returns an error due to the vi save report being disconnected (as expected). But when I connect the path to save the report to the File.vi, I get an error-2147352567 (screenshot 2) at a table to append to report.vi elsewhere in the code, which worked perfectly well until the road was connected to the vi to save the report. Also, now the second excel file is saved because its path has been connected. I don't understand what is the question. I couldn't find any source that has given me a reasonable solution to the problem either. I use Labview for less than 2 weeks, so forgive me if I forgot something.

  Hi DPAC.

  My apologies for the confusion in the previous post, I thank very you much to clarify it.

  Following my last post; the error was due to a race condition. There is no data flow between two separate writing report files. This means that LabVIEW will try to run the two bits of code in parallel. However, it was sometimes causing one of the sub-vis to be called by two different parts of the code at the same time, causing the error.

  This is the reason for which the code executes without error above if you have disconnected the path to the first 'save report to File.vi', because this part of the code was not running, allowing the second party to run freely.

  To counter this I simply wired terminal 'error' "save report to File.vi" (the one that used the All_Saved.xlsx) in the terminal ' error in ' of the 'new Report.vi' (one who has used the Template.xlsx). Because the screws will not work until all entries are filled, this forces the writing of the first report before the writing of the second report, not occur at the same time.

  I have attached the revised version of the "EOL_V1.vi" where you will be able to see how I wired errors to force execution.

  I also noticed that you have not initialized your shift register "speed". This means that every time that you run the program, it will retain the last value from the previous execution. Is - this intentional? This means that your worksheet does not properly update if you run the program twice in a row.

  Thank you

• Mystery, error-50103

  OK, so I'm finally up to LV2009f3, making a few cDAQ work.

  I add code for devices, one at a time and check them out.

  (I use OR simulated chassis and features simulated - thank you, for that ability!)

  When I add the extensometer (NOR-9237). I started getting an error (- 50103 - resource is reserved).

  MAX said the jury works very well and gives me the simulated sine wave.

  Boil my my program code, and it works fine by itself.

  But when I try to do BOTH module 4 (9201) and module 6 (9237), I get the error.

  Extract attached (like extracts, BTW) illustrates the code.

  Before I added the thread error to force the strain gauge module to configure the voltage MODULE, I would get the error each time.

  But, sometimes it would occur on the module of TENSION and sometimes on the module of DEFORMATION.

  I could run several times and the error would come from one or the other, but it would occur every time.

  So what are the rules here?  They are completely different modules, and yet something is temporarily tied up when I try to set them up in parallel.

  It's a kind of race, judging by the error happening on one or the other.  A string claimed this "resource", and the other considers it occupied and complains.

  However, the error is attributed to the vi START TASK.

  What Miss me?  What are the rules about this?

  
  

• Error opening of automation

  HI, I've faced an error while I try to open the excel program in labview, when I tried to run the program, I get the problem but when I remove the battery sequence then it become Ok and I don't know why, cansomebody please help me.

  Thank you

  You have no error clusters wired, so if a mistake happens along the way, you never know. A couple of obvious questions:

  • You create unnecessary references you already have. More precisely: you use the Worksbooks.Application property to get the reference to the Excel application, which you already have. This is an entry to the VI!
  • You must close the references in the opposite order in which you created the. Therefore, you must use the cluster of error to force a shutdown sequence. Your reference functions close have no such dependencies, so you can't know in advance that you will run first.

  I would say going through the thread Excel for examples on how to manipulate Excel via ActiveX.

• Unable to connect to the e-mail server through Time Warner, errors in Windows Mail

  All of a sudden, I have problems with my mail connection. I keep getting errors connecting to the server - I'm on a pop3 server with time warner. My e-mail application windows displays an error. Force connection and after 1 or 2 timeouts, I finally get a connection for a few minutes.

  As this happened, I noticed the startup for the top lap time takes 3-4 minutes extra. Safe identity (Norton) also takes a lot of time to react. If the internet connection is very good.

  Other computers in the House connected to the same router and modem are not problems

  You can also check here: www.oehelp.com/OETips.aspx#3 Norton and WinMail are notoriously inconsistent.

  Steve

• Windows 7 Professional new hardware Activation error

  Two days ago my computer received a boot error and forced me to restore to an earlier point. Yesterday, I received a Windows activation error telling me "the product key must be enabled with new material. I have not installed new hardware recently and I guess some piece of hardware that caused the system to need of a restoration is either faulty or the rear roller is causing Windows to think that I have installed a new piece. I have the product key and the Original OEM System Builder pack, but entering again into the key of the exact same error recurs immediately.

  I'm not very savvy Windows so that any aid or an idea of where is would be greatly appreciated.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------
  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  What's your date and time correct?

• Error Windows with Memory.dmp after registry cleaner

  Hello

  Often, I run my registry (Eusing) cleaner to help my computer work better. But recently, he finds more errors than usual and after cleaning the registry, I lost the use of my touchpad (because I use a laptop), my computer ran more slowly (even if she becomes faster), and restart, shut down or even shut down my laptop, it will always do, then come (when it comes) telling me an error that forced the phone to restart. The error concerns the files

  C:\windows\minidump\061114-26972-01.dmp

  C:\Users\*username*\appdata\local\temp\wer-76471-0.SysData.XML

  C:\windows\memory.dmp

  After restarting my computer in safe mode, the errors have not persisted, but restarting leads to a DPC_WATCHDOG_VIOLATION.

  Please let me know which files you need to see, and how I can download them.

  Wednesday, June 11, 2014 18:41:22 + 0000, Shnerdling wrote:

  Hello

  Often, I run my registry (Eusing) cleaner to help my computer work better. But recently, he finds more errors than usual and after cleaning the registry, I lost the use of my touchpad (because I use a laptop), my computer ran more slowly (even if she becomes faster), and restart, shut down or even shut down my laptop, it will always do, then come (when it comes) telling me an error that forced the phone to restart. The error concerns the files

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read
  http://www.howtogeek.com/171633/why-using-a-registry-cleaner-wont-speed-up-your-PC-or-fix-crashes/
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  You can also read the section on the registry of CCleaner
  Here cleaning product:
  http://www.howtogeek.com/113382/how-to-use-CCleaner-like-a-Pro-9-tips-tricks/

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

• means of a loop with associative arrays / objects: #1034: forced conversion

  I had a long post somewhere on here and just want to start a specific post on associative arrays just.

  First of all, I have a table which I do not know if it is an array, an associative array or an object, or both.

  That is to say: I read that below would be an object but works like a table also.

  The problem is when I use this table as references to instantiate classes in a runtime shared library.

  I seem to be able to create appropriate tables and objects, BUT I certainly can't use/acess them correctly. I have a massive confusion between movieclips and objects.

  I get an error of forced conversion when I try to add objects to a movieclip. just because I want to add the elements of mc to the scene.

  var definitionsArray:Array; 
  var bubblesArray:Array; 
  var currentBubble:*; 
  var correct:uint; 
  var incorrect:uint; 
   
   
   
  this.definitionsArray = new Array(); 
  this.definitionsArray.push({ sound:"AppleSound",mc:"Apple" }); 
  this.definitionsArray.push({ sound:"BananaSound",mc:"Banana" }); 
  this.definitionsArray.push({ sound:"BreadSound",mc:"Bread" }); 
  this.definitionsArray.push({ sound:"CakeSound",mc:"Cake"  }); 
  this.definitionsArray.push({ sound:"WaterSound",mc:"Water" }); 
  this.definitionsArray.push({ sound:"TomatoSound", mc:"Tomato" }); 
  this.definitionsArray.push({ sound:"SandwichSound",mc:"Sandwich" }); 
  this.definitionsArray.push({ sound:"PizzaSound",mc:"Pizza" }); 
  this.definitionsArray.push({ sound:"PearSound",mc:"Pear" }); 
  this.definitionsArray.push({ sound:"OrangeSound",mc:"Orange" }); 
   
  getData("library/food.swf", definitionsArray); 
   
  function getData(libreria:String, matriz:Array) 
  { 
      this.definitionsArray = matriz; 
      var context:LoaderContext = new LoaderContext(false,ApplicationDomain.currentDomain); 
   
      var loader:Loader = new Loader(); 
      var req:URLRequest = new URLRequest(libreria); 
   
      loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onAssetsLoaded); 
      try 
      { 
          loader.load(req); 
      } 
      catch (e:Error) 
      { 
          trace("Asset load error: " + e); 
      } 
  } 
   
   
   
  function onAssetsLoaded(e:Event):void 
  { 
      this.cartelArray = new Array(); 
      var loader:Loader = Loader(e.target.loader); 
   
      this.libreria = loader.content;//this isn't used 
   
      //var mezclaMAtriz:Array = this.definitionsArray.slice(); 
      bubblesArray = []; 
      for (var i:uint = 0; i < this.definitionsArray.length; i++) 
      { 
          var libraryDomain:ApplicationDomain = loader.contentLoaderInfo.applicationDomain; 
          var mcClass:Class = libraryDomain.getDefinition(definitionsArray[i].mc) as Class; 
          var soundClass:Class = libraryDomain.getDefinition(definitionsArray[i].sound) as Class; 
   
          var obj:Object = new Object(); 
          obj.mc = new mcClass(); 
          obj.sound = new soundClass(); 
   
          this.bubblesArray.push(obj); 
          placeBubbles(); 
      } 
  } 
   
  function placeBubbles():void 
  { 
      var bubble:MovieClip; 
      for (var i:int = 0; i < bubblesArray.length; i++) 
      { 
          bubble = bubblesArray[i]; 
          bubble.addEventListener(MouseEvent.CLICK, onBubbleClick); 
          bubble.x = 100 + i * 150; 
          bubble.y = 100; 
          addChild(bubble); 
      } 
      // start game 
      nextChoice(); 
  }
  

  If you set as an object, and then use this way...

  bubble var: Object;

• B0rked evil

  Then...

  My MacBook Pro, and then running the Mavericks is really slow. I made an early charge/reinstall. I've done it before. Now, he completely removed the bucket.

  -When left for periods (went to sleep, screen off) it takes 30 seconds to understand what is happening. The screen will return as usual, but the weather will be bad (I guess when she fell asleep) and it will have wifi Internet connection problems. I'll take the ball in rotation for 30 seconds range. 90% of the time it works very well there.

  -The 10% when it isn't, I can sometimes restart without problems. After you have reinstalled everything, I have to start up using CMD + R + Option + P and go from there. Other times I have to restart with CMD + R and go through disk utility to repair disk and it will start.

  However, last night, the Mac HD drive would not it seems. It did once but then wouldn't appear on the startup disk to restart. I tried again just now, and I use my laptop computer of this type to the top.

  Other things:

  -Hate YouTube. If I have my subscriptions page open in a tab and watch another video in another tab and God forbid, open another window, it becomes temperamental and I have to cross my fingers, pray to a God (s) and quit Safari and hope it opens again without having to reboot. I also have this error to "force reload".

  6.2.8 Safari with extension Ad Block activated by a click, Flash off.

  Other programs I have running:

  -Thunderbird

  -Quick reference card

  -Skype (chat)

  I'm at a total loss for what to do. I called the one and only local Apple dealer, four times, with one left message and no word from the back, so I guess they don't want my money.

  Back up your Mac if you have not already done so. Read https://www.apple.com/support/backup/to learn how to do this please. To learn how to use Time Machine read to use Time Machine to back up or restore your Mac. The reason for creating a backup, it's that the symptoms you describe pourrait be a sign of an imminent hard drive failure, data security is a major concern.

  Then, shut down your Mac and restart in 'Safe Mode '. To learn how to do it please read: try safe mode if your Mac does not start-up. Compare works your Mac in Mode for how safe it was.

  Then restart normally. If the same problem comes back, please read the section If a problem does not occur in safe mode for actions recommended to Apple.

  Finally, you can temporarily create a new user account and log into this account to determine if the problem also exists when connected to this account. To learn how to do read how test a question in another account on your Mac - Apple Support. When you are finished troubleshooting, you can remove the temporary user account by following these instructions: OS X Mavericks: remove a user. Before you delete, confirm that you have not need of all the files that you have possibly set in this account.

  Let me know what you decide.

• Thunderbird in a loop after the new installation

  Error XPCOM forced me to install the latest version. Every thing seems OK until I tried to open the Inbox. TB has opened in my folder of ABC, and I wanted to go to my Inbox. As soon as I made the program went into what seems a loop without end. thinking that I just have to wait some time I decided to open a message to ABC. As soon as I did the text for each message has disappeared and the hour glass icon appeared. The hourglass is also display in the file selection box. I had turned off Avast shields and they are always disabled. IM using XP service pack 2 (long story). Thank you

  personally, I would leave the avast shield off forever. See https://wiki.mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #AVAST

• Satellite U840W PSU5XA - Win 8.1 installation and effective use of SSD

  Hello.

  IM in the hope of a solution to the two questions.
  The second that I suspect is caused by the first.

  Satellite U840W PSU5XA-001006

  Has started getting the BSOD with various defects.
  The most persistent has been IRQ LESS or not EQUAL - iaStorAV.sys

  Many hours of research and I can't find a solution or post did the extension "AV" the iaStore.sys...

  So I have provided zero factory (BSOD) issues have persisted.

  So, I Clean installed Windows 8.1 directly above everything and removed all previous records.

  I noticed that the system was not working all utility brand TOSHIBA factory etc. and seemed to be much slower. I suspected that this was caused because of the 32 GB used SSD as Cache has apparently been bi-passe and now everything worked strictly on the 500 GB HARD drive. I don't remember BSOD, but the system has been significantly slower on the start-up and performance.

  (SIGH), I even once reset to factory settings, and it gave me back TOSHIBA utilities such as gas stations of the brand.

  HOWEVER, the BSOD remained, and once the upgrade to windows 8.1 MAINTENANCE of files and settings, the iaStorAV.sys error is returned (specifically when closing lid in mode "standby") forcing the CRITICAL error and force the system to restart instead of awakening from sleep.

  Note: Windows is a legitimate copy of MS, so it's not the question. More strange, it's that 8.1 installation had run at least 8 months no problem before sudden BSOD Page file and iaStorAV errors. Readings and messages have believe me MS Updates to bee the culprit here for the start of these issues.

  I read a similar post regarding RAID CACHE PRIOR to 8.1 Windows Installer. My intuition tells me that these two can only be related. that is if windows was incorrectly installed RAID cache, CACHE is not in strored properly and causing BSOD. Im a beginner at this stuff, so be patient...

  What I really want to know is, how now can I Factory Reset Windows 8, make it positive to the 32 GB is used as CACHE and help etc. fastboot, then pass safely to 8.1 Windows?

  Any help would be greatly appreciated.

  ATTEMPT of THINGS ALSO: TSRI and RAID re - install, memory (success), updated BIOS to 6.70, Diagnostic fast storage re-installed drivers

  Thanks in advance,
  Mr. frustrated...

  iastorav.sys is part of the technology Intel Rapid Storage Technology driver.
  The BSOD appears to be related to this pilot and is therefore the first step which I recommend: update the Intel rapid Storage Manager driver.
  The latest version should be available on the Intel driver page.

  If you use the Toshiba Recovery disk or the HARD drive recovery process, you will get the same system and State of the laptop computer as on the first day of purchase. In this case, the system must be configured correctly.

  But if you have deleted or replaced the HDD / SSD in the past, then the RAID configuration is lost and must be rebuild with special tools / software and the procedure.
  This can be done ONLY authorized by the service provider.

  By the way: the upgrade to win 8 to 8.1 Win has been very well described in this Toshiba HowTo doc:
  http://www.MyToshiba.com.au/support/items/how-to/823

• Print from NotesEverything on Android

  I am trying to print from NotesEverything on Android and it doesn't work, what's the problem?

  Any idea about my problem, the printer is HP 6600

  HI Ahah,

  I did some research using an android tablet. I tried the steps that you used tries to access the folder NoteEverything of the HP ePrint App and I see what you were doing referring to all types of files not supported.  The types of files supported for the app are controlled by application developers.

  During my research, I tried to print from NoteEverything using the available options and each of them gave me an error message and I didn't want to report the error or force close.  I included the link to the FAQ for NoteEverything.  If the information you are looking for isn't here, you can click on the 'Support' Section at the top of the page and submit your request to NoteEverything.

  NoteEverything FAQ

  http://www.softxperience.mobi/41-1-FAQ.html

  NoteEverything Support contact page

  http://www.softxperience.mobi/99-1-support.html