Error General and General validation error

Similar Questions

• ORA-04098 trigger 'BANKTRAN_BEF_DEL' is invalid and and re-validation failed

  Hey Experts,.
  
  I created successfully after...
  
  
  create or replace trigger BANKTRAN_BEF_DEL
  before you delete the BANKTRAN
  declare
  weekend_error EXCEPTION;
  not_authentocated_user EXCEPTION;
  Start
  If TO_CHAR(SysDate,'DY') = "SAT" or TO_CHAR(SysDate,'DY') = "Sun" THEN
  RAISE weekend_error;
  end if;
  If SUBSTR(User,1,3) <>'ATN' THEN
  RAISE not_authentocated_user;
  end if;
  EXCEPTION
  WHEN weekend_error THEN
  RAISE_APPLICATION_ERROR (-20001,
  "Destruction not allowed weekend");
  WHEN not_authentocated_user THEN
  RAISE_APPLICATION_ERROR (-20002,
  "Destruction permitted by users of authentocated");
  end;
  
  
  but when to delete records using query removes from BANKTRAN
  
  get the below error
  
  ORA-04098 trigger 'BANKTRAN_BEF_DEL' is invalid and and re-validation failed
  
  Published by: SShubhangi on January 7, 2013 16:21
  

• Outlook HTML and CSS Validator problem

  Hello
  
  I downloaded Outlook HTML and CSS Validator for DreamWeaver 8 (WordMailSupportMacromedia.msi) but when I followed the instructions and went to check the browser settings, "Microsoft Word" has not shown in the list of target browsers.
  
  Anyone know why, or have a fix?
  
  Thank you very much!

  Well, I got it. The default installation path was to be changed FROM:

  C:\Program Files\Macromedia\ \Configuration\BrowserProfiles\ Dreamweaver MX 2004

  TO

  C:\Program Files\Macromedia\ \Configuration\BrowserProfiles\ Dreamweaver 8

  for someone else who could meet this slight problem.

• I can't access to our private internet connection... I get the error messages like acquiring network address AND identity validation

  problem network address acquisition
  I can't access to our private internet connection... I get error messages like acquiring network address AND validation of identity no matter how long I wait nothing happens... Please help me.

  create a new internet connection or reset TCP/IP socket

• VCAC 6.0: stuck in a loop of redirection? On the APP THE Catalina.out log shows 'value of invalid condition' and 'the validated expression is false': these errors are put in correspondence in time with the attempt to log on

  I try to connect to the basic vcac device by opening a browser for https:// < VCAC-applicance name >.companyname.com/shell-ui-app/ and I have connection with [email protected] and the password I know is good

  But what I get is just a ' send' button in the Northwest corner of the screen and I can't click on it. continues to change the text after the URL in the address bar and the "donut" (hourglass) keeps spinning

  the address in the url box is redirected to the device of the identity

  I restarted windows server running IAAS, the paralytic of identity and the VAPP VCAC 'CORE' and I always put the question in all the browsers I'm looking for

  That is likely to be a problem of synchronization (NTP) time of 98%. Ensure common NTP, then go a little further and make sure that all the hosts as the vCAC bits are running on are also synchronized.

  Grant

• The minimum/maximum application of the total general (Validation)

  I have a form with several fields to which users (employees) to enter their work hours. The total general (a read only field) must be 40. I relied on FormClac to enter the SUM function.

  I want to prevent users from sending the form if the total is less than or greater than 40, but I don't want to constantly make them an error message (while filling out the form) if the total is not 40. I want the error message to appear only if they try to submit the form and to prevent them from sending the form if the total is not 40.

  I really don't know much about JavaScript so I would really appreciate if someone could send me an example.

  Thank you

  Yaniv

  Use xfa.host.messageBox ().

  See the help of designer at http://livedocs.adobe.com/livecycle/8.2/acrobat_designer/wwhelp/wwhimpl/js/html/wwhelp.htm

  For the method messageBox, in particular, see http://livedocs.adobe.com/livecycle/8.2/acrobat_designer/001720.html

  Steve

• Laptop (5 years) now says Windows validation of needs, selected and computer Validation stops on the grassy Hill. Help

  Should I re install windows from disk?

  I certainly don't want dammage existing and images files.

  Help me!

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

• Copy of Windows is not genuine and the Validation Code: 0x8004FE21

  Original title: Windows decided I'm not not authentic Windows

  Hello

  Re the above, I ran the diagnostic tool:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - VGV87 - C7XPK-CGKHQ
  The Windows Product Key hash: sdEjrEJjW0FuXAhegYxl8GAkBYg =
  Windows product ID: 00359-OEM-8992687-00016
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {957DD72C-4BE2-4E23-B6B2-7DA21406DE0E} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120503 - 2030
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {957DD72C-4BE2-4E23-B6B2-7DA21406DE0E}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-CGKHQ00359-OEM-8992687-000162S-1-5-21-3111097882-3599632542-1217928279Sony CorporationVPCF12M0EAmerican Megatrends Inc.. R1120Y6 20101011000000.000000 + 00096893A07018400FE08090409GMT Standard Time(GMT+00:00)03SonyVAIO109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800016-02-2057-7600.0000-0842010
  Installation ID: 020282293221092940813812188063337024446971455913676902
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: CGKHQ
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 25/10/2012 20:13:54

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 10:20:2012 14:31
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current Hash HWID: MgAAAAEAAwABAAEAAAACAAAAAgABAAEAln1AeiJFzq6scsxxUizOA plus wcFM4gwf6/dlY

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  HPET Sony VAIO
  MCFG Sony VAIO
  SLIC Sony VAIO
  SSDT Sony VAIO
  SSDT Sony VAIO

  Can you please help?

  Thank you

  This may simply be caused by a bad set of drivers of technology Intel Rapid Storage Technology-

  Intel rapid storage driver installation

  try to download and install them from here - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21730

  (you want the download of iata_enu.exe)

  Once complete, please restart twice, then after another MGADiag report.

• Store XML in the schema issue generated tables and XML Validation against the schema.

  Hello friends,

  I am facing a problem where to store xml in a saved schema generated from tables.

  It's my diagram

  --

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < xs: schema xmlns:ds = ' http://www.w3.org/2000/09/xmldsig# "" xmlns: XS = " " http://www.w3.org/2001/XMLSchema "xmlns =" " http://www.ABC.inf.in/test "targetNamespace =" " http://www.abc.inf.in/test" elementFormDefault = "qualified" attributeFormDefault = "unqualified" > "

  < xs: include schemaLocation = "abc.xsd" / >

  < xs: element name = "project" type = 'student' >

  < xs: annotation >

  < Intention > it is a Documentation < / intention >

  < / xs: annotation >

  < / xs: element >

  < / xs: Schema >

  -This is my xml document

  "< project versão ="2.00"xmlns ="http://www.abc.inf.in/test">."

  "< test xmlns ="http://www.abc.inf.in/test">."

  " < intest version ="2.00"Id ="testabc"xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "  >

  < ide >

  < cUF > 35 < / cUF >

  < cNF > 59386422 < / cNF >

  < natOp > This is post < / natOp >

  < indPag > 1 < / indPag >

  < mod > 55 < / mod >

  < set > 1 < / series >

  < / ide >...

  .....................

  Giving not complete because it is too long.

  1. I registered successfully of the schemas in the database

  2. then I generate the saved schema table

  2. in my java code I have validated the document XML schema compared and it's valid successfully.

  3 but when I recorded this XML file in the generated table there me gives error

  As:

  INSERT INTO XMLTABLE

  VALUES

  (XMLTYPE (bfilename('MYDIR','testabc.xml'), NLS_CHARSET_ID ('AL32UTF8')))

  Error report:

  SQL error: ORA-31061: error XDB: XML error event

  ORA-19202: an error has occurred in the processing of XML

  LSX-00333: literal '94032000' is not valid with regard to the model

  And I have to store this xml in tables of this so what I have to do?

  Thanks for your reply odie_63.

  I got this my solution for the error. My XML document is not well structured based on my registered XML schema.

  Average in My XML Document is an invalid value and which do not match my schema model so it gives this error

  SQL error: ORA-31061: error XDB: XML error event

  ORA-19202: an error has occurred in the processing of XML

  LSX-00333: literal '94032000' is not valid with regard to the model

  For the Solution, we have two ways

  1. I changed this literal value "94032000" in my xml file, then save it.

  2.

  -To delete this schema can

  -We need to change the schema for the particular element model

  like: -.

  -then to store xml in the database, it works...

  Thank you.

• Bug: ViewObject programmatic and form Validation

  Hello
  
  I've set up a display object as described here: http://stackoverflow.com/a/14611815/59087
  
  Assigned to the view object is a shown here validation rule: http://i.imgur.com/HXiwPUL.png
  
  The StartDate attribute value must be a date equal to or earlier than the EndDate attribute.
  
  The view object is not supported by an entity. With the help of an entity here is not logically necessary as these input parameters are intended to be transmitted directly to a report. The parameters are independent of an entity and rather arbitrary.
  
  When a February 1, 2013 start date and an end date of February 28, 2013 are given, a validation rule error: http://i.imgur.com/8v4007w.png
  
  You can see how the view object has been created here: http://imgur.com/HQLNh5U, uqtt5Fq, X8fldVt, HXiwPUL, 8v4007w #0
  
  This was recorded as a SR with Oracle and received the following response, "I guess the question here is this place where you added the validation. If this is added to the attribute level, then he will be fired by updating the attributes and there is no guarantee of the order of the attributes updates. If this is not the right place for you to add validation dealing with several attributes of value. Ideally it should have been added as entity level validation in your OE. And if your VO is updatab; e, that he must have been supported by EO-it is British Colombia was designed.
  If EO the introduction is not possible now, maybe, you can try to replicate the validation at the attribute level and trigger the validation of the attribute last updated"
  
  I'm fairly certain that by selecting programmatic (http://i.imgur.com/HQLNh5U.png), this means that no entity is necessary for the view.
  
  In addition, given that the Rules of Validation tab appears (http://i.imgur.com/HXiwPUL.png), and a comparison rule can be defined, it leads me to believe that it is a bug.
  
  As a workaround, I can define an 'empty' entity that is not accompanied by a database object and performs an entity-level validation. I don't like this because it is a little more work and requires the implementation of a transitional 'ID' fake to uniquely identify the row.
  
  Other ideas (how can I enforce the order of updates of attributes so that StartDate is filled in the view before EndDate object, thereby ensuring that the validation is successful)?
  
  Published by: Dave.Jarvis on February 7, 2013 11:31

  Dave, support has a point here. Level of the attribute validation cannot cover the rules that have other attributes in the rule. In this case, you are detailed on the order of the attributes. The reason is that the validation of the attribute levels fires when the attribute changes its value. This is why the framework allows entity level validation (naturally only on an EO) where you can assume that all values are up to date and can be compared with each other.
  However, on a view levels validation object only transient attributes attribute is permitted. As is the validation of the attribute levels the same ruling applies as for EO. You should not compare two attributes of a levels of attribute validation rule as you cannot predict the order attributes and so you cannot predict the outcome of the rule.
  I do not see a bug here, such as validation to only at the level of the attribute.

  OK, what can you do?
  You can add an EO (as you said already) and add a level entity rule it. It will work, but needs some work more.
  You can remove the date field validation rules. MinValue and validate them in for example a bean or you can even use a method that is exposed in the client interface of your VO for this. Then, you call the method when the user clicks the button before you start the report. When the rule is triggered, you do not start the report, but the message.

  Timo

• Date and form validation if java is disabled and obligation to hide the text areas to start

  Hi, currently my web page has a form on it where it select where there is a date entry and a speaker, and two text boxes where only is visible depending on the results of the verification of availability.

  Here is an example of the part of the shape of my page.

  my form with spry validation. no date or selected speaker.

  I have a few questions.

  First of all:

  When my page loads first the speaker's text non-reserved area is visible and the speaker is reserved textarea is hidden.  I guess that's because loading my page it refers to my database and nothing is so the speaker is non-reserved textarea is visible and the speaker is the placeholder text is hidden.

  How to get two text boxes to hide on start to the top of the page?  Here is my php code to the beginning of the model.

  ==============

  <? php require_once('.. / Connections/conEmjMarketing.php');? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  
  

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  
  

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  
  

  
  

  @mysql_select_db ($database_conEmjMarketing, $conEmjMarketing);

  $query_rsCurrEvents = "SELECT speakerRequested, event, place, datebooked, startTime, endTime OF booking ORDER BY datebooked ASC";

  $rsCurrEvents = mysql_query ($query_rsCurrEvents, $conEmjMarketing) or die (mysql_error ());

  $row_rsCurrEvents = mysql_fetch_assoc ($rsCurrEvents);

  $totalRows_rsCurrEvents = mysql_num_rows ($rsCurrEvents);

  $query_rsCurrEvents = "SELECT speakerRequested, event, place, datebooked, startTime, endTime OF booking ORDER BY datebooked ASC";

  $rsCurrEvents = mysql_query ($query_rsCurrEvents, $conEmjMarketing) or die (mysql_error ());

  $row_rsCurrEvents = mysql_fetch_assoc ($rsCurrEvents);

  $totalRows_rsCurrEvents = mysql_num_rows ($rsCurrEvents);

  $query_rsCurrEvents = "SELECT speakerRequested, event, place, datebooked, startTime, endTime OF booking ORDER BY datebooked ASC";

  $rsCurrEvents = mysql_query ($query_rsCurrEvents, $conEmjMarketing) or die (mysql_error ());

  $row_rsCurrEvents = mysql_fetch_assoc ($rsCurrEvents);

  $totalRows_rsCurrEvents = mysql_num_rows ($rsCurrEvents);

  
  

  
  

  @mysql_select_db ($database_conEmjMarketing, $conEmjMarketing);

  $query_rsSpeakers = "SELECT speaker speaker speaker ORDER BY ASC";

  $rsSpeakers = mysql_query ($query_rsSpeakers, $conEmjMarketing) or die (mysql_error ());

  $row_rsSpeakers = mysql_fetch_assoc ($rsSpeakers);

  $totalRows_rsSpeakers = mysql_num_rows ($rsSpeakers);

  
  

  $colname_rsAvailability = "-1";

  If (isset($_POST['speakerRequested'])) {}

  $colname_rsAvailability = $_POST ['speakerRequested'];

  }

  $colname2_rsAvailability = "-1";

  If (isset($_POST['datebooked'])) {}

  $colname2_rsAvailability = $_POST ['datebooked'];

  }

  @mysql_select_db ($database_conEmjMarketing, $conEmjMarketing);

  $query_rsAvailability = sprintf ("" SELECT speakerRequested, datebooked FROM reservations WHERE speakerRequested as AND bookings.datebooked %s = %s ", GetSQLValueString ('%'.") $colname_rsAvailability. ('%', 'text'), GetSQLValueString ($colname2_rsAvailability, 'date'));

  $rsAvailability = mysql_query ($query_rsAvailability, $conEmjMarketing) or die (mysql_error ());

  $row_rsAvailability = mysql_fetch_assoc ($rsAvailability);

  $totalRows_rsAvailability = mysql_num_rows ($rsAvailability);

  ======================

  The second question:

  My form works very well with spry validation.  Validation of date format for the date text box work, validation for the speaker select jobs.  My question is how to validate that the date is a valid date and speaker selection box is not empty if java is disabled?

  Where do I put this code? How do I call? How can I show that the field is in error?

  Thank you winrol

  If you return to the solution I created for the date, you will see that the error messages are displayed by elseif clauses. You must do the same for the message of the speaker.

      Please select a Speaker.    Please select a Speaker.
  
      Please select a Speaker.
  
  

• What the property QGeoPositionInfoSource to reset and reset valid types are doing?

  Hello

  I found a property Reset inQGeoPositionInfoSource and Valid reset types are "cold", "warm", "hot", "factory", "ee_data", "almanac", "ephemeris" ????
But unable to found what is the purpose of this property and what are these valid Types do???


  Reference: http://developer.blackberry.com/cascades/reference/qtmobilitysubset__qgeopositioninfosource.html

  Can someone help me with this?
  Fadi

  Hi Fadi,

  The reset property to reset the GPS receiver on the phone. Valid types involve degrees of reset State. Over time, GPS receivers collect and store data that can be used to help either place resolves quickly and accurately. However unlikely, is that a GPS receiver can get into a bad state, it may still be necessary that it should be reset. What each type of reset means may depend on the GPS receiver (it can vary between phone models). Some things can be qualitatively derived type name and knowledge of GPS terminology.

  Be aware that if you set the reset of the receiver is not actually reset until a post is requested later (i.e. by calling QGeoPositionInfoSource::startUpdates() or QGeoPositionInfoSource::requestUpdate ()). Also, the reset may cause a significant delay until the next update of position occurs.

  Kind regards

  Jim

• [ADF, JDev12.1.3] Manages the pageFlowScope same bean validation of the different fragments of BTF. Doubts about the 'object' and 'uiComponents' validator parms

  Hallo,

  I have a 'registration' process bounded with 4 fragments workflow.

  There is in each fragment components entry created by dragging different fields of the same instance of VO.

  The user cannot access the next step if the current step is not correctly filled.

  In the fragment of 1st, the user chooses its type (customer, supplier,...) and in the following steps, the fields are has shown/Asterisk based on her user'type selected (I save the String bean var type managed pageFlowScope dedicated to the btf).

  Because of this in the original Version, by the way the key, there is no other area marked as mandatory.

  To manage the visibility of fields I set the property of rendering the fields (or their container) using EL expressions that read the type in the managed bean stream.

  To manage the fields points, I thought only 2 solutions:

  1)

  For each field to create a validator that checks if the fied was flled and function in the formato (e.g. for emails) right in the successful flowScope bean. So I'll have so many validator functions as areas to manage.

  
  

  2)
  

  Create a unique global validator to which the property of the validator for all fields will point in the managed bean flowScope.

  For example

  public void myGlobalBtfValidator(FacesContext facesContext, UIComponent uiComponent, Object object) {
    if (uIComponet.getId() == "InputTextEmail") {  // Component is in Fragment_1
      // Check if the filed is filled and its format
    }
    if (uiComponet.getId() == "InputTextMobileNumber") {  // Component is in Fragment_2
      // Check if the filed is filled and its format
    }
    if (uiComponet.getId() == "InputTextAddress) {  // Component is in Fragment_3
      // Check if the filed is filled
    }
  // ...
  }
  

  ID' would like to know if the 2nd solution might work and that is the approach recommended among them.

  Then, I would like to know if I can use ther uiComponent parm to the validator without any problem. I ask this question because in many threads, I saw only the parm object used. What are the different function/purpose of these 2 settings?

  Thank you

  Federico

  If you do not want to re-use these validators elsewhere in your application, then method unique validator will be enough.

  Of course, if the implementation of this method only validator will require a huge amount of code, it is probably better to split this option to separate validator methods (to simplify the maintenance).

  BTW, ID of component has to be short, so instead of using the id of the component, set f: attribute on each component of the user interface and to use uIComponet.getAttributes () .get ("attrib_name")

  Dario

• Field of own ViewObject and its validation mutual transient fields

  Hello

  I have a question about the validation between the own field of ViewObject and transitional fields.

  My VO has an attribute named AmountReceived & it is inherited from the EO.

  My VO has also 2 transitional named Expense1 and Fees2attributes. These 2 transient fields are directly added to the level of the VO.

  Now in the Page UI, I have a table for my VO.

  For each row in the table, all 3 fields above appears.

  I have to validate this Expense1 + Fees2 cannot be greater than AmountReceived field.

  I know I can do this at the bean support using valueChangeListener but the problem with this implementation is the user can COMMIT the transaction without correction of the data.

  Where and how should I apply my validation logic SO that the user must need to correct the data before embarking, I mean when the user loses the focus of the current row in my table - it should trigger my logic and the user must need to correct the data?

  Help please?

  Thanks - Hitesh

  As you have two fields for each row place in the OT instead of the original version. Then, you can implement a business for your validation rule.

  Timo

• Browser files and the validation of the image

  Hi all.
  
  My version of the apex is 4.1
  
  I have a file browser item in the form to upload a picture and I save the image in the database as a BLOB.
  My problem is necessary validation to check if the selected file is really a picture. is this possible?
  
  
  
  
  Thank you

  Hello

  One way can be to create validation and wwv_flow_files of the query to see the mime type
  Here is the example for the validation of type Exists

  SELECT 1
  FROM wwv_flow_files
  WHERE LOWER(mime_type) LIKE 'image%'
    AND name = :Px_YOUR_FILE_BROWSER_ITEM
  

  Replace Px_YOUR_FILE_BROWSER_ITEM with your actual name of the file to the browser element

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai