Problem with SMS on motorola Dext

Similar Questions

• BlackBerry Q10 Q10 SQN - 3 problem with sms!

  Hello bb,.

  Dear bb, I need your help... I have problem with Deliver text messages

  When I will write an SMS so no problem post but does not...

  -with my service provider is not a problem (Slovak telekom)

  -with the other service provider where to send a text message is not a problem (O2, Slovakia)

  -J' have test give my SIM card to another phone with android and there isn´t system no problem (Sony Xperia mini pro)

  Problems is the only software in my Q10 I know that 100%. When I use original the last 10.3.1.1779 link bb os so I have this problem with sms, but when I give for example the version 10.2.1.3175 of the software from this page: http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using... so my problem is solved. In my mobile is all good, the sim card is unlocked and registered by the blacberry services...

  Can you help me pls bb, I want to use os 10.3 because is very fast and pleasant

  Thank you

  First of all, there is no "official" AutoLoaders Automatic chargers are 100% unofficial methodology... but (with the exception of the ' leaks') they are built from the officially released OS components. Therefore, as long as the creator of the autoloader is a) reliable and b) is not an error (be gentle, because they are human too), then the autoloader should be quite safe.

  Here's a great archive (IMHO) of automatic Chargers:

  • http://forums.CrackBerry.com/BB10-leaked-beta-OS-f395/BB10-OS-archive-943672/

  The link at the top of the first post of this thread is a great repository of Autoloaders... and the source is one that I consider to be very reliable.

  Good luck!

• Problems with SMS blackBerry Smartphones

  I only had my phone for five days and suddanly am experiancing problems with my SMS messages. It comes to disappear in the air. It isn't because I'm out of space. I have a 4gig SD micro card and PLENTY of space... In any case, I want to know what to do. It's a little embarrassing text and he went two seconds later. This recived including.

  Free 7 MB file is moderately low. You probably have a problem of not enough memory.

  First thing? Remove the battery from your device, hold on a minute, replace and restart and check the free file again. What is - what now?

  Read this: http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...

  And this: http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...

• Problems with SMS interception using notifyIncomingMessage on some BB

  Hello

  I use following code to detect incoming SMS and inform the user about a device external hw.

  //...
  import javax.wireless.messaging.*;
  import javax.wireless.messaging.MessageListener;
  import javax.wireless.messaging.MessageConnection;
  //...
  
  MessageConnection _mc = null;
  
  public class XXX extends MIDlet implements MessageListener ... {
    //...
    _mc = (MessageConnection)Connector.open("sms://:0");
    _mc.setMessageListener(this);
    //...
  }
  
  public void notifyIncomingMessage(MessageConnection conn) {
    //Message m = _mc.receive(); // 'conn == _mc', right?
    Message m = conn.receive();
    String address = m.getAddress();
    String msg = null;
  
    if ( m instanceof TextMessage )
    {
      TextMessage tm = (TextMessage)m;
      msg = tm.getPayloadText();
    }
    else if (m instanceof BinaryMessage) {
      StringBuffer buf = new StringBuffer();
      byte[] data = ((BinaryMessage) m).getPayloadData();
      msg = new String(data, "UTF-8");
    }
    //...
  
    System.out.println("Received SMS text from " + address + " : " + msg);
  }
  

  Basically, it's the code for the example of knowledge (http://www.blackberry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...). This example works well on 5 different real devices (4.5 to 5.0) I tested it on.

  However, some users report that SMS notifications does not work on their BB:

  8120 (4.5.0.124)

  8900

  9700 (5.0.0.405)

  I have it has not tested on any of these BB. All other notifications (e-mail, call, calendar...) work very well for them.

  No idea what could be the problem? (Before, I turn to the different interception method.)

  First potential problem is permissions Application - if accesds 'Phone' is not allowed, your attempt to register the MessageConneciton fails with a ControlledAccessException.

  Second potential problem is the fact that MessageListener can be opened only by a single application.  Subsequent attempts will fail with an exception (don't remember exactly what the exception is, something like the use of PortAlreadyIn).

• Problem with SMS blackBerry Smartphones (OS 5?)

  Hey,.

  I have a small problem, if we can look at this problem. When I from an SMS from a friend X, my Blackberry lag (the screen does not change, as 0.5 sec). But when I have from a TEXT we will tell Y, this can take up to 5-10 seconds before the passage of the screen or I can move with the touch pad to display the message. It's boring.

  This is so I think it's because...:

  -J' have more than 35,000 SMS in the comic book?

  -J' have like 5000 and 100 SMS from X to Y?

  -My phone is on the vibrator, but there is music?

  -What OS 5? But it is faster then OS 4 and I have updated there?

  Any ideas?

  Thanks in advence for any suggestion

  Greetings, David.

  EDIT:

  Info on the device

  Your carrier:

  -Rogers (Canada)

  Information model and OS version:

  -Curve 8900, OS v5.0.0.509

  Apps and free space

  Free file before and after a battery to remove/replace:

  -42456184 bytes (41 MB) before and 33852330 bytes (32 MB) now (I restarted about 1 week ago)

  A battery pull fix your problem?

  -Never

  Installed apps and their version if possible. :

  -J' have many, Facebook, Twitter, BBM, MSN and other 15-20

  Feature of BT model/version:

  -WTF is BT?

  Hi there David (Squad-G) and welcome to the forums.

  I think you've actually already nailed the reason for the delay.  If you have 100 SMS from X and 5000 of is your BB has problems of handling all the messages in the database.

  Do you want that all these SMS?  If you do not need to keep them all on your device, then consider your SMS database backup and delete older messages that you no longer need to keep.  At least that way, you can still have a record of your SMS messages, but they need not be slow down your phone.

• Problems with the keyboard on DEXT lighting

  I just bought an Ant DEXT, I have a real problem.

  Whenever its dark and I open the keyboard, the light goes on. It turns on only when I hit the ALT key, but sometimes I don't want to send a message by the numbers.

  Does anyone have the same problem? You have a solution?

  Thanks for the replies, I really hope I can solve this problem.

  I had this problem on my first Dext... you should phone Orange for a replacement, to my knowledge there is no way to get it fixed.

• Problem with new phone unlocked DEXT

  Hello... I just got the orange pay DEXT UK as u go. I am in India while I unlocked the phone by using a code purchased online, but, while the phone seems to be unlocked and I can receive and send pending by India Vodafone SIM card, I can't connect to blur bike. Although the network bars are full, I get the error "the phone radio is unable to connect to the network. Make sure the radio is on or if it is on, move in the best area of cover and try again. "Can someone please

  Go somewhere with wifi access. On your phone, click Menu then set up the wireless network. SE connect to that wifi and it must cross.

• Problem with SMS notification

  Hi all

  I wrote an application that should be listened to SMS. But the SMS arrived, nothing happened. Why?

  I run the following code with the debug (BlackBerry 9000 Simulator) mode, and I know that the application is not awake receive mode (after receiving SMS the line after the red line must be called).

  This is the code I wrote:

  DatagramConnection dc = null;
  try {}
  DC = (DatagramConnection)Connector.open("sms://" ");
  for(;;))
  {
  Datagram d = null;
  d = dc.newDatagram (dc.getMaximumLength ());
  DC. Receive (d);
  ubyte bytes [] = d.getData ();
  Address of string = d.getAddress ();
  String msg = new String (bytes);
  System.out.println ("received text SMS of" + address + ":" + msg);
  }
  }
  catch (Exception e) {}

  I thank.

  OK I have the solution.

  The Simulator is defective!

  I tried with a real device and it works.

  Thank you all.

• Problem with SMS blackBerry Smartphones

  When I try and send a message to my husband sometimes with the unidentified Subscriber but I can text the rest of my family and friends without any problem, he worked in the past

  I hope that your hubsand is not blocking you!  j/k

  I think you need to call your provider with this information.

  You know someone else who uses the same carrier as your hubsand?  I was wondering if you could send a test text.

  I bet you get the same error when replying the text you receive from him?  You can also try a battery pull... You never know.  Better yet, make a blackberry and use BBM!

• BlackBerry Smartphones 8830 world edition - problems with SMS text messaging

  Every now and then my phone randomly deletes my journal of history and appeal of texting. The only thing left in my folder of messages are emails I've sent or received. I can still send text messages, but I can't receive them, and then all of a sudden everything will be back to normal. I checked my media card and I still have 1.7 GB free space again so I don't think that it is a memory problem.

  Anyone know what is happening?

  Will be

  The items that you have saved on the media card do not count for the memory of the device. You can check the device memory by going to Options | Status and take note of your free file number. Then reset the unit by removing the battery and 1 min and replace it and let the device restarts. After that he did check and see if your free file number has increased.

  Also do you have a lot of third party applications on the device that you don't need? If so you can do in the Options | Advanced options | Applications and delete those you no longer need.

  See also the links JSanders provided on other ways to increase your memory

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8100&message.ID=9099

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Problem with the blackBerry Smartphones SMS Inbox

  I had problems with my Blackberry Torch 9860 sms Inbox.  The time and date that are on my phone are correct, but when I go to my sms Inbox, the date is showing that "May 22, 2043" and each message arrives at "12:08" no matter what time it really is.

  This is an easy fix?

  Thank you!

  I ended up remove all the messages of this 'day', so he would not appear in the Inbox and now when I send or receive that he puts the messages in the right time.

  I have nothing else it seemed to have settled himself.

• Problem of the blackBerry Smartphones with SMS.

  Still a student here, so please help me out.

  I think I have the same problem with a few BlackBerry users out there. I can't view SMS even if there is clearly a notification that I have a new SMS. I need to go to view SMS Inbox to display the message.

  Your kindness will be highly appreciated.

  Thank you.

  First try a simple reboot on the device > phone smart BlackBerry turned on, remove the battery for a minute and then reinsert the battery to restart.

• ios10 problem with non-users of iphone messaging

  After upgrading my iPhone 6 ios10, I had intermittent problems with the messaging of Android users (basically, the conversations no iMessage). In about 60% of the time it is not just to deliver the message no matter what I do (pressing the 'Try Again' don't work do not). He has no problem with the reception of the texts, but I can't answer to Android users (Interestingly, I can message users of Android if they are in a group with iPhone users text). I tried everything was updated to the last verision until reset of ios everything.

  I can't find anything online about this. I'm the only one who what?

  Group Messaging uses the MMS. Normal text messages using SMS. SMS uses the voice channel to transfer messages and is strictly a basic function. If you are experiencing problems sending SMS, contact your carrier.

• problem with iPhone ios 10.0.1

  The first time that I m facing a problem with updates of ios not able to use the iphone.

  I can't use one of basic such as sms features or whatsapp does not not touch only.

  When you are coming up with the fix or let me know what will be the revert revert back as soon as possible back strategy.

  Kind regards

  Mehul vora

  098207 20061

  Hello. Please you not to Apple here. This is a user forum. All users are waiting for the next update with bugfixes.

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.