Error importing for .prproj files

so I just hit mc adobe CS4 for the first time, my church is allowing me to use the studio/editing room while being not used during the day at certain times. I am compiling my wedding dvd to make it more proffessional than the already made vesion (which looks very amateur with a menu of basic model and so on). I intend to use some flash on the menus and perhaps even include an Easter egg as well. in any case, with the other program I imported all the media of the camera (which is a HARD drive camera that records everything in files is a MOD) I had a converter is a mod for a while so who are already saved converted.i on an external HARD drive, I have created a folder on the computer and just hung out and banged against the back.

in any case, with my old program (cyberlink power producer) I just import media into the editor, make the changes and cuts and save the project. then import the project in the program of the author to make the menus and burn it. When I first pulled the program to acclimate to it, I decided to run through a test empty very fast a start full of stop the dvd of a very small video burning. I did a short set of clips and montages in first (the oevr all the project are like time 6 minutes). saved the project, and when I go to import the project into yet he bed "the software that is used to decode the media is not available on this system" "adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem. »

I can code the project as an mpeg, and it imports fine. I can import individual clips that make up the project in again, they work very well as well.but if I import the .prproj file, it gives me the error. So what's the deal? can you drag and drop these same files? I just try to keep permanently encoding files after 3 encodes, I fear that the video quality will suffer too much damage, so I will try to do where I can simply import the project and then at the end of burn the project to a dvd.

I figured it better ask here, this way I look like a crazy person, anonymously and doesn't look like a fool to people I don't really know. Heh.

CS4 works differently than does CyberLink. You change PrPro and author in Encore. You have two choices on how to get your material edited in yet. We can use Adobe Dynamic Link of PrPro yet and still going to do the transcoding of all for you, or you can export PrPro as a DV - AVI or transcode MPEG-2 compatible DVD. I will not comic book here, just the DVD-video.

Method you choose is yours. If you decide to do the transcoding in PrPro 100% compatible MPEG-2 DVD, you want to read about "bit-budgeting", because you will need to take the necessary decisions.

Now, let's talk PRPROJ file for a while. This ARTICLE will give you background on what they are, and why they matter not in yet, you've discovered. Along the way, some of the ins-n-out of Saving the Project files you press too. The difference from CyberLink is he talks behind the scenes between its modules. With PrPro and again, you will need to use Adobe Dynamic Link (ADL) - the same thing, but you kind of move to the 'surface' in Adobe.

The help files will give you a complete overview on ADL.

Hope this helps,

Hunt

Tags: Encore

Similar Questions

  • Generic error import for MOV files with lower rate

    I copied several video files from my iPhone 4s to my laptop (Windows 7) and tried to import them in first 14 elements. Some of them import successfully, some of them will result in a failure of the support add with the message "the importer reported a generic error." Looking for the files causing outages, I noticed they have a rate lower than all other files. The majority are 29 and those who fail are 27 or 28 fps. Is there a way to fix this error or around?

    Thank you!

    Convertk with Handbrake at a constant rate.

  • [HELP] Generic error importing the mp4 file

    I'm trying to import mp4 on Premiere Pro CC 2014.

    He keeps noticing "Importer pointed out the generic error."

    This is happening because I'm using the trial version?

    If not, what is the problem now?

    First of all, need someone to help... more information please click below and provide the requested information

    -Premiere Pro video Editing information FAQ http://forums.adobe.com/message/4200840

    Secondly, MP4 is a wrapper, which is inside YOUR package - exactly what is on the INSIDE of the video you are editing?

    Information about the codec & Format, with 2 links inside for you to read http://forums.adobe.com/thread/1270588

    A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do

    https://forums.adobe.com/thread/1070933 for instructions of screenshot

    Free programs to get information on PC/Mac http://mediaarea.net/en/MediaInfo/Download files

    Your video using a VARIABLE rate or a rate constant?

  • Lightroom error importing of large files

    I use Lightroom 4.4 on a Mac with OS 10.9.5.

    I get everything when trying to import images into Lightroom, for some more great, an error message that they are too big. According to http://help.adobe.com/en_US/lightroom/using/WS42D207D7-B290-4baa-A896-AB71965BF24B.html files 65kx65k pixels should be OK. But there is for example a JPEG with only 16633 x 32650 pixels (113 MB) of the rejected cases (I tried a TIFF version of it, that does not work either).

    There is no problem to manage these JPEGs with Photoshop (CS6) or ImageMagick (even with 65280 (= 256 x 255) pixels per side...)  I hope that the limit of 65 k in LR is also < 2 ^ {16} and not 65000).

    Is there any solution for this? I would be willing to upgrade to LR5, but according to the specifications that it should work with LR4.

    a JPEG file with only 16633 32650 pixels x

    LR 4 and 5 help say, "Lightroom does not support files with dimensions greater than 65 000 pixels per side or greater than 512 million pixels.»

    Your file exceeds the final requirement of 512 million pixels.   16633 32650 x = 543,067,450, which is either 543 million pixels, or 518 million pixels, depending on what definition you use.

  • Error importing ResourceObject xml file in Deployment Manager

    Hello world

    I get this error by making import of HRPeopleSoftResourceObjects.xml (A resource object xml file) in the Deployment Manager. I do this step of reconciliation Authoritative (Trusted Source).

    Error that says:- not present attribute in EntityDefination to user: ExpectedReturnDate.

    ExpectedReturnDate is a field of the UDF (Customize). I did the import of metadata and sandbox for this field create this attribute to IOM. I see this attribute on the user details screen as well as in the User Table by IOM. Ideally this error should be, no popup. I do this import of reconciliation.

    I pulled and checked all xml as (UserEO.xml.xml, userEO.xml.xml, userVO.xml, UserVO.xml.xml) of oracle.iam.console.identity.self-service.ear_V2.0_metadata1 files and found ExpectedReturnDate field is available.

    I use: IOM Version - Oracle 11g Release 2
    Version of database - 11.2.0
    WebLogic version - 10.3

    Please let me know how to fix this error.

    Appreciate your response and your support!

    Best regards
    Vijay Kumar

    The console design, open your resource object. Recon tab and click on the button create a profile reconciliation.

    -Kevin

  • Sever error running for WMP files and the music does not!

    I saw others similar to this one, but as the title says, I get this error! In addition, the music files do not appear in my files when I try to open them using programs such as Windows Movie Maker or other software media.

    I tried restarting the computer and turn Windows Media/disable again in Windows features. I tried several entries of both command line.
    As far as I know that I am not infected with malicious software (Ran a scan with Norton).  The last program 3rd party, I downloaded is a modeling software (DAZ3D, that I then uninstalled after that sounded like it was too hard computer work).
    My OS is Windows 7 32 bit

    Hello

    As with any database, the information that is stored in the database or the database itself can be damaged. The Windows Media Player library database can usually recover automatically from the database. However, the database may be corrupted in such a way that Windows Media Player is unable to recover the database.

    a. click Start, click run, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
    b. Select all files in the folderand then click delete on the file menu.

    Note You don't have to remove the folders that are in this folder.

    c. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

    a. click Start , click run , type %LOCALAPPDATA%\Microsoft and then click on OK.

    b. Select the Media Player folder, and then click delete on the file menu.

    c. restart Windows Media Player.

    Note: Windows Media Player automatically rebuilds the database.

    For more information see: http://support.Microsoft.com/default.aspx/KB/925718

    I hope this helps!

  • When you try to import photos, I get an error that says that the preview is not available for this file.

    When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?

    Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH

    Hi rsobieski,

    Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.

    Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.

    Kind regards

    Tanuj

  • When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported.

    Original title: Please help me

    When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported. The selected file is not valid or is corrupted. but before a few years, I used this then all files was import but now this errors can help u answer me please

    When I try to import an mp3 file for the background music for my videos I get the following message: C:\Documents and Music\Karaoke.mp3 Documents\My owner could not be imported. The selected file is not valid or is corrupted. but before a few years, I used this then all files was import but now this errors can help u answer me please

    =====================================
    MP3 files can be problematic in Movie Maker...
    Best bet would be to convert the files to the. WMA
    format before you import into Movie Maker.

    There are many converters available on the net... the
    the following link is an example:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory (freeware)
    http://www.videohelp.com/tools/Format_Factory
    (the 'direct link' is faster)
    (the file you want to download is: > FFSetup295.zip<>
    (FWIW... installation..., you can uncheck
    ('all' boxes on the last screen)
    (Windows XP / Vista / 7)

    First... after the download and installation of Format
    Factory... you can open the program and
    left click on the toolbar, the "Option" button and
    "Select an output folder to" / apply / OK.
    (this is where you find your files after they)
    are converted)

    Drag and drop your music files on the main screen...

    Select "while"WMA"/ OK...

    Click on... Beginning... in the toolbar...

    That should do it...

  • 0xc0000428 error - "Windows cannot verify the digital signature for this file."

    Original title: 0xc0000428 error

    I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

    Hi Rajisace,

    ·         How long have you been faced with this problem?

    ·         You did it last changes before the show?

    ·         Please provide us with the file information in the error message.

    Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

    Using the last good known Configuration

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

    1. right click on my computer-> properties

    2 Hardware tab Device Manager->

    3. right click on the sound card, video card and NIC, one by one, then click on turn off

    4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

    After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

    I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

    Method 3: Check a drive for errors

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

    Hope this information is useful.

  • Header error when importing large wav file

    Hello guys

    I get an error message when I try to import a wav file into Premiere Pro.
    When I import a small file I don't have the problem, but when I try to import a file with 10 GB I get the error message: "cannot open the file due to an error header. The file I want to import was performed with the hearing.
    I tried the solutions that other people posted in the old discussions, but nothing worked for me.

    How can I solve this problem? I'm getting crazy with it.
    Thanks for your time.

    I expect more support from the community. It's a shame

    OK, for people with the same problem:
    The way I fixed this was split the audio of the movie in 3 parts (each part about 3 to 3.5 GB) with first, later I sent each party to the hearing. Then standardized the audio that's what I had to do, recorded every standard file and put it again in the first.

    In the end joined the 3 parts first and worked well. I was afraid to do this because of the standardization process, that I wanted to do with hearing. I didn't have 3 parts with different audio levels after normalization. Fortunately worked well

    Kind regards.

  • Error message "Preview not available for this file.

    I use LR 4.4, but it did not work properly since I got my new camera (Canon 70 d). When you try to import, I get the error message "Preview not available for this file. I got lucky better connection of the device with a usb cable, which allow me to see the jpg images, but he wouldn't let me see the raw images (.cr2). I would solve this problem by opting for the LR5?

    I use LR 4.4 on a Windows 7 PC.

    Thanks for any help that can be provided.

    Robert

    Support for the Canon 70 d was introduced with LR version 5.2. See the link below.

    Camera Raw plugin | Supported devices

  • Do not understand what that means i/o Error: import the file

    I am building a website in dreamweaver cs5 with an XML doctype. When I tried to validate my css I got an error code that I do not understand. This is the error: IO error: import file:/Volumes/Macintosh%20HD/Users/schweideltyson/Desktop/CS%2080_final%20project/gallery .html: operation not permitted. Any suggestions? The only thing I can think is that I imported a text for my another Web site index page.

    XML is used for data.  It is an example of a selection of media in XML.

    http://XSPF.org/NS/0/">

    file:///MP3s/song_1.MP3

    file:///MP3s/song_2.MP3

    file:///MP3s/song_3.MP3

    XHTML is for web pages.

    http://www.w3schools.com/HTML/html_doctype.asp

    Nancy O.

    ALT-Web Design & Publishing

    Web | Graphics | Print | Media specialists

    http://ALT-Web.com/

    http://Twitter.com/ALTWEB

  • Get an error when you import a security file

    Hello

    IM struggling to import a security file in the planning... This is the error I get

    Enter the password: kill Mar 30 09:30:53 SAST 2010: validating the Secfile.txt...
    Kill Mar 30 09:30:53 SAST 2010:-FILE not FOUND FROM EXCEPTION.

    The server is running unix: I use the command from the directory where the utility ImportSecurity.sh is... I also copied the secFlie.txt file in the same directory. But still the same error.

    There is a slight problem with versions of unix

    If you use the exportsecurity utility it will create a file called:- secFile.txt

    When you use the importsecurity utility, it looks for a file called:- Secfile.txt
    As it is case sensitive you must update the secFile.txt exported

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • When I include photos from a folder in the Photos app in the dock, and I have created an album for them, their changes. It is important for me to keep them in the same order that they were in the file. (It's a numerical order). Any solution?

    Recently, I switched from PC to Mac, and I transferred all my files photo. Now I am their integration in the Photos app in the dock (by dragging the file etc). But when I include photos from a folder in the Photos app in the dock, and then create an album for them, their order in the album change of what it is in the file. It is important for me to keep them in the same order that they were in the file. (In the file it is in numerical order). Any solution?

    You can drag and drop to any order in your albums.

  • How can I put my 10.2.1 to 10.2.2 FCPX so I can download a Canon plug-in so I can import. MFX files for my media.

    How can I put my 10.2.1 to 10.2.2 FCPX so I can download a Canon plug-in so I can import. MFX files for my media. I went to the App store for the latest update and it tells me I have the latest version installed. What is happening here, I missed something? Thank you is advanced.

    It IS in the shopping page? If so, move the application to the trash, and the re - download.

Maybe you are looking for