Error in ACR, 8.2 after update in CC

Similar Questions

• 0xc000012f error status keeps popping up after update? (system32\uxtheme.dll)

  The 0xc000012f error keeps popping up on my hp Windows 8 pc after that I downloaded the necessary updates. But I was not updated to Windows 8.1. The same window keeps popping up after I try to leave the window with regard to system32\uxtheme.dll, but for all the different programs. For example: Skype.exe - Bad Image C:\Windows\system32\uxtheme.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. 0xc000012f error status. There are countless windows popping up after that I tried to shut it down. In addition, it won't let me run all downloaded programs he says there is an error with. I can't uninstall KB2879017 update because I don't have it. Help, please!

  I was helping someone with this earlier today and uninstall the kb2936068 update fixed it.

  I actually called Microsoft and also read this thread.  A single update of IE seems to cause this and their solution is to refresh the windows.

  I wish that they investigate why this happens and patching rather than just people reinstalling Windows.

• Satellite A100: Error power USB from standby after update BIOS 5.20

  Hello

  I have problems of USB power since the upgrade my BIOS to 5.2 days on receipt of an email from Toshiba, advise the upgrade

  I got a 100 - 200 PSAA8E Windows XP Media Edition since the upgrade of the BIOS to 5.20 I get message error power but only when the computer comes out of standby

  The error message tells me that "a USB device has exceeded the limits of its hub port power.

  I have nothing connected to one of the USB ports

  I talked to guys tech at length to Toshiba, but they can't seem to explain or correct the problem - a same thought it could be a motherboard problem, but cut which like the timing is too coincidental to be something other than the upgrade of the BIOS.

  If anyone knows a fix, so I would be grateful - is - it possible to find a previous BIOS and roll back from 5.20

  I guess if it's the BIOS, then when they deliver another it will correct itself?

  Comments appreciated

  Phil

  Hello Phil

  Maybe again the stupid question, but I also want to know why you made the decision to do the BIOS update? Is there a particular reason or you just want to have laptop with the latest version of the BIOS.

• Error on BBM blackBerry Smartphones after update to OS 7.1 bundle 2494 (v7.1.0.907)

  I recently did an upgrade of my system OS and I can access is no longer to BBM - given error "Cannot set up to BBM" 'can't access BBM survey services. Check that your device date and time is well together and try again. »

  I wrote the check, and it still does not work. I did a reset to the factory settings and it does make a difference.  I did something with routing host and also return the Services.

  Please help, it's very annoying.

  With this, I have also two e-mail accounts.  One loaded perfectly and the other just used to load even with the correct settings.  Also very annoying.

  Thanks in advance.

  Monica

  Thank you for your response. I resorted to send to our provider will be scheduled.  Apparently an error with the firmware update that he screwed up.  2 friends with the same problem, so beware if you update your firmware.

• On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  HI MikeGeorgen,

  I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.

  Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  Thank you for using communities Support from Apple. See you soon!

• Error activation iMessage & Facetime after updating IOS 9.3

  I use iphone 5 and you have problems for activation iMessage & Facetime after updating IOS 9.3.

  first of all the message: "an error occurred during activation.

  I tried activation use Apple ID receipt message: ' an email address verified must to connect to iMessage "& always push to open a safari browser session. It is, I have 5 e-mail address who checked everything, but this message is here yet.

  Yosiw wrote:

  I use iphone 5 and you have problems for activation iMessage & Facetime after updating IOS 9.3.

  first of all the message: "an error occurred during activation.

  I tried activation use Apple ID receipt message: ' an email address verified must to connect to iMessage "& always push to open a safari browser session. It is, I have 5 e-mail address who checked everything, but this message is here yet.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• Error code 61499 after update license (FPGA)

  Hello

  I am a fairly experienced user of FPGA module.  I have LabVIEW 2009 installed (version 9.0.0) including the FPGA on XP 32-bit module.  Everything worked well and I had a project specific FPGA that had been built and run in the last month or so.

  In the meantime, the license has expired, so I had to update the license.  After update of the license, I made a trivial change in VI (default values has changed some entries to the front) and tried to compile and run.

  This has generated the error-61499, with additional information:

  Error starting compile step: make sure that a compatible version of Xilinx tools is installed in the location specified in the Setup from LabVIEW.

  I looked after error-61499 in LabVIEW FPGA and a few other positions.  I checked the path of compilation of LabVIEW FPGA registry keys and it seems fine (C:\NIFPGA2009\Xilinx\ISE).  This directory exists and is the right size (3.74 GB).  A temporary directory is created in C:\NIFPGA2009\srvrTmp\localhost.  I searched the pearl58.dll file but couldn't find it.

  When I look at the license installed recently and the license has expired in the License Manager NOR, I see no difference between the two other than the expiration date.

  Summary: I had a working facility and the project, updated the license file and now get error-61499.

  ???

  With the help of an Application engineer, I tried two things.

  First of all, I tried to 'fix' the FPGA Module through the "Add or remove programs" utility in Control Panel.  That had no effect.

  Then, I downloaded and installed NOR-RIO 3.3.0 of the support zone, drivers and updates.  That solved the problem!

  So, for someone who has a similar problem in the future, try to reinstall the driver OR RIO.

• Crash computer after installing Netgear N600 Wireless Dual band Router WNDR3400. My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.

  My computer crashes after I installed the Netgear N600 Wireless Dual band Router WNDR3400.   I uninstalled and then reinstalled, but my home computer still crashed.  My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.  Any suggestion?

  Hi JudyWinn,

  If you need assistance for updating BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer to update the BIOS (Basic Input Output System) & check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.
  Please post back and we do know.

• Update Windows Vista error code A 8024, 000 after replacing the HARD drive

  Hello

  I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

  After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

  I tried the solution provided in this thread, but did not work for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

  I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

  Any help is appreciated.

  Thank you.

  Eugen

  Hello

  1. which utility Microsoft Fixit did you tried to load?
  2. what happened when you tried to load the Microsoft Fixit utility?
  3. what was the error message when you try to update the installer?
  
   
  Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
   
  Method 3:
  
  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
  http://support.Microsoft.com/kb/946414
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
  Download Windows Vista Service pack from here:
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Reference:
  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• After updating to iTunes, I couldn't open TI-kept saying: run-time error.

  After updating to iTunes, I couldn't open TI-kept saying: run-time error. Help please

  C:/program files (x 86)

  R6034

  An application has made an attempt to load the C runtime incorrectly library.

  For more information, contact the application support team.

  I uninstalled iTunes, tried to reinstall, it never leaves me. Always giving this error.

  Original title: Microsoft C ++ Runtime error

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  "Resolution of problems with iTunes for Windows Update"

  https://discussions.Apple.com/docs/doc-6562

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• USB not recognized problem, it worked fine before, then update iOS to 6 is out, and when I plugged it in iPad after update, started having error shortly after.

  I conducted an audit of file, the disk check, you click on uninstall the driver in Device Manager and went as far as reinstalling Windows (I sell the laptop) and still have the error! Someone help me please correct.

  It was working fine before, then update iOS to 6 came out, and when I plugged it in iPad after update, started having error shortly after. I tried to install and unistaling software from apple, and as I said, I even reinstalled windows. always error.

  Hello

  Method 1:

  I suggest you to run the fixit from the link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Method 2:

  Step 1:

  In Device Manager, check whether the USB controller appears as working properly or have a yellow on her exclamation when the device is connected. Look for error codes as well.

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  Step 2:

  Check if the device is recognized on another computer.

  Hope this information is useful.

• After update, I can't start PS error is 213:5. Anyone know what it is?

  After update, I can't start PS error is 213:5. Anyone know what it is?

  Hello

  Please see the links below for help:

  Solve the 213:xx question and error Acrobat X and XI Acrobat license

  213:5 configuration error

  Adobe Photoshop elements 12-error 213:5

  Hope this helps!

• After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

  Hello

  Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  Let us know if this helps!

• Can help to solve the issue of "the application could not start properly? < < Error after update CC

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  I had several programs that I've updated (Adobe PhotoShop, Adobe Audition, etc.), at the same time. None of the other programs seems to have problems starting.

  
  

  I uninstalled Adobe after effects Adobe Premiere Pro CC and CC and have the same results, aka, error notice, after reinstalling.
  

  
  

  I did some research and do not seem to have found a definitive solution to the problem.

  
  

  • Can you please help me solve this problem. If you have encountered this problem and it is successfully resolved your entry is particularly useful.
  • Can you suggest ways to avoid this, or similar questions in the future. It makes me feel very reluctant to update my software CC if I'm going to experience the hours/days/weeks of delay due to having to solve problems.

  
  

  Thanks in advance for your help.

  Hi Leslie,.

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• ACR stop working after software update for Radeon

  I have a card Radeon R9 270 and CC Phoshop/Lightroom.  Everything worked very well. Then, I received a software update from ATI and accepted the installation to version 015.041.000.000. When I opened PhotoshopCC, a pop-up said that I had to enable GPU for ACR. I checked the box and opened a RAW file. ACR window open and I clicked the Open button. He locks up Photoshop. I had to stop the PS with the Task Manager. When I opened LightroomCC, the GPU box has been checked if I tried to use it. the first image open, but when I tried to click on another image, it froze and I had to close it with the Task Manager. I then disabled GPU in PS and it works fine. Given that Lightroom is just a front end for the cab, the develop module will not work and lightroom just freezes.

  I asked s ATI of instructions on how to revert to the prior software, but have not heard of them. I can not so much through the Device Manager because the revert button is grayed out.

  A quick search returns: Lightroom CC crashes after updating the Radeon driver