Error in Active Directory operations

Similar Questions

• The Active Directory operation cannot be performed

  Hello

  Sorry for my bad English...

  I have installed and configured a vdi system to deploy an office on 3 different Active Directory domain.

  I have configure the broker with admin of a domain for each domain 3 when I deploy it. Che pool 2 field is create successfully without error, but in the last pool I have this error:

  _Error in provisioning6/10/09 08:47:28 CEST: cannot perform the operation of Active Directory. COM error code:-2147016689 _

  I have check the domain admin profile and name resolution on the broker and the vcenter, without error.

  In the vmware site, I can't find the 2147016689 error code.

  Can someone help me?

  Good bye

  Fabrizio

  This area is also a subdomain or entirely trust others?

  Kind regards

  Christoph

  Don't forget to assign points if this answer was helpful for you.

  Blog:

  http://Communities.VMware.com/blogs/Dommermuth | http://www.thatsmyview.NET/

• Why do I get an error message "Active Directory Domain Services unavailable" when I'm not connected to a server?

  I have 2 computers running under that Windows 7 Ultimate SP1 connected to a modem-router D-Link. I have defined a collective dwelling and have attached my HP Officejet 4500 printer to the router.

  At the office on both computers, when I click on "Find a printer" in the window of the printer, I get the error "Active Directory Domain Services unavailable. Do not understand why this error exists, since I do not have any field. There is no server on the network.

  Hello Chaim,

  Thanks for posting your query inMicrosoft community.

  I understand that you have a guest of error as you try to find the printer. So, please try to follow the following suggestions to solve the problem.

   
  Method 1: First of all, try to update the printer driver which might help you resolve the issue. Click on the link below for more information on the updated printer drivers.
  
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Additional information:
   
  Please refer to suggestions provided by Adam_W_ responded on May 28, 2010
  http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/clicking-find-printer-shows-error-the-active/52bfd961-ff62-4397-b8cf-a0708f0cb3d2.
  
  I hope this helps. Otherwise, please respond to this answer and we will be happy to help you again.

  Thank you

• When you are looking for a printer I get error: "The Active Directory Domain Services is currently unavailable."

  Original title: domain Active Directory unavailable Services

  I have an HP laptop, works with Vista Business SP2, all MS etc updates Now, I get a message "Active Directory Domain Services" unavailable when I try and find the printer and cannot print to any printer, USB or a netwrok, I used to be able to. Dead in the water. I tried the trick of Notepad listed in this forum, "Run as administrator", disable the firewall, malware, antivirus, uninstall the drivers, updates re-installed, downloaded, everything. HELP PLEASE!

  Hello
   
  Thank you for the update.
  Question: There may be conflict between printers.
   
  Try the methods that you have not tried earlier and check after each method:
  Method 1:
  Solve printer problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-printer-problems
   
  Method 2:
  Step 1: uninstall the printer driver and reinstall the driver:
  Find and install printer drivers in Windows 7: http://windows.microsoft.com/en-US/windows7/Find-and-install-printer-drivers
   
  Step 2: Define any default printer and check:
  Change your default printer: http://windows.microsoft.com/en-US/windows-vista/Change-your-default-printer
   
  Method 3: problems printing from the Internet: http://h10025.www1.HP.com/ewfrf/wc/document?DocName=buu01105&cc=us&LC=en&DLC=en#N453
   
  Reference link:
  Impossible to print or view, preview printing a Web page in Internet Explorer:
  http://support.Microsoft.com/kb/973479
   
  It will be useful.

• by clicking on find printer displays error "The Active Directory Domain Services is currently unavailable" I am on a network home windows 8

  When I use word and the products that come with it, I get the above error message.  Then the print job does not print.  Have you tried a lot of bugs, but none have worked.  Help, please.  I'm pulling my hair out.

  Hi Ibilofsky,

  Clear printer spooler files and activate the spooler service and check if the number fixed.

  Step 1

  (a) press the Windows key + R, type "Services.msc" (without the quotation marks) in the Open box and click OK.

  (b) double click on "Printer Spooler" in the Services list.

  (c) click on stop, and then click OK.

  (d) press the Windows key + R, type %WINDIR%\system32\spool\printers in the open window and delete all the files in this folder.

  Step 2

  You must be logged on as administrator to perform these steps.

  (a) open services and right - click the Print Spooler service, and then click Properties.

  (b) under the general tab, next to startup type, make sure that automatic is selected.

  (c) if the service does not, under Service status, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Check the status of the issue.

  It worked perfectly.

  All installed printers came instantly. No need to reinstall the printer etc drivers they worked already well before the show. It was a spooler problem.

  Thank you.

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Active Directory Service disabled

  Hello

  I just installed Windows Server 2012. After you have added the DNS and Active Directory functions/roles on the server, I noticed that the Active Directory service is not running, but it is disabled. When I try to start the service, I get the error - The Active Directory Domain Services service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Any ideas what could cause this?

  Hello

  To improve assistance regarding this issue, it would be better to post in the Microsoft TechNet forum.

  https://social.technet.Microsoft.com/forums/en-us/home

  Thank you

  Legaede

• Active Services Web Directory has encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance

  VCenter Server 4.1, I installed it on a physical machine. This is the error message that appears whenever I try to follow what is happening every 1 min event viewer.

  Error:

  role for users: log name: Active Directory Web Services

  Source: ADWS

  Date: 2010-07-28 15:55:21

  Event ID: 1209

  Task category: Instance ADWS events

  Level: WARNING

  Keywords: Classic

  User: n/a

  Computer: wwubmw.williamwoods.local

  Description:

  Services Web Active Directory encountered an error when reading the parameters for the specified Active Directory Lightweight Directory Services instance.  Services Web Active Directory will try again this operation regularly.  At the same time, this body will be ignored.

  Instance name: ADAM_VMwareVCMSDS

  The event XML:

  The OS is Windows 2008 R2. What should I do to solve the problem.

  Thanks for the reference Troy

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Gregg Robertson, VCP3, 4, MCSE, MCSA, MCTS, MCITP

• Connection error Active Directory Windows Server R2 2012

  Hello

  That's my problem, I have two servers both running Windows Server R2 Datacenter 2012 I installed AD - DS on one of them and allow the installation to configure the DNS settings, this server is also a DHCP server. On the server I want to connect to AD, I address DNS pointing to my AD server which is 192.168.1.60 and it's also getting an IP address from the DHCP server. But it connects to Active Directory, when I try the ping command on the domain name which is yewman.email he's trying pings an external IP address (which is my public ip address because I also have the yewman.email of real estate) how to fix this? It's the mistake of connection AD:

  Note: This information is intended for a network administrator.  If you do not have your network administrator, notify the administrator that you have received this information, which has been recorded in the C:\Windows\debug\dcdiag.txt file.

  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "yewman.email":

  The error was: "the DNS name does not exist."
  (0x0000232B RCODE_NAME_ERROR error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs.yewman.email

  Common causes of this error are:

  -The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:

  192.168.1.60

  -One or more of the following areas do not include delegation to its child zone:

  yewman.email
  E-mail
  . (the root zone)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error in mscomct2.ocx after application of active directory

  Hello!

  I developed a system of inventory for my business application, that I am currently working.

  The application is developed using VB6 and works perfectly until the Active Directory is implemented.

  The error will like "component mscomctl.ocx or one of its dependencies is not correctly registered... etc.

  I already checked the administrator account and tried the app and it works exactly the way it should be.

  I have already ruled out the user to the list of unauthorized users and included everyone in the group. I rebooted the computer several times.

  I guess that active directory is causing the problem.

  The error goes to the time windows 7 & 8 (64-bit)

  Please help me.

  Thanks in advance

  Hi Owen,.

  Welcome to the Microsoft community.

  The question you posted would be better suited in the TechNet Forums. I suggest you to ask your question in the TechNet Forums for assistance.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

  Thank you

  Kulu Sharma.

• When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get an error message.

  MMC.exe APPCRASH

  When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help

  Problem event name: APPCRASH

  Application name: mmc.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918d 09

  Fault Module name: KseAdm.dll

  Fault Module Version: 6.0.1262.1064

  Timestamp of Module error: 49426cbb

  Exception code: c0000005

  Exception offset: 0004 849 d

  OS version: 6.0.6001.2.1.0.272.7

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Packaging of FDT on windows error when you add the Active Directory in the package contents

  Hello!

  Trying new tools of FDT 5.5 for Adobe AIR, so far so good but I just encountered a problem when you try to add an Active Directory package.

  I add the shape of directory the FDT-> FDT AIR properties of project-> BlackBerry-> content tab package properties

  I click on add a directory and add the path to my Active Directory. (My current directory is in D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\bin\assets)

  I then run a debugging, and I get the following error:

  Start debugging package.
  Package failed!
  Package failed: 1
  Error: File or dir does not exist: D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\bin\assets error: file or dir does not exist: D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\D:\Users\Julien\Travail\SRC\FDT5-workspace\MonArc\bin\assets

  There is a bug filed in Jira of FDT: http://bugs.powerflasher.com/jira/browse/FDT-2739 go vote for ;-)

  I get only this error when packaging of BlackBerry app, iOS or Android, everything is fine, so I guess that maybe it's a bug in the BB Plugin for FDT...

  If anyone has experienced this problem and know a workaround solution?

  Thank you!

  Yay, this has been fixed in FDT 5.6!

• Continuation with VIO and Active Directory reference error

  While deploying the instance OpenStack de VIO, I get the following error message when checking the parameters of authentication source:

  Cannot find the specified user (Group). Details: The LDAP search request failed. Further reference

  This seems to be a problem, I met several times, where AD would send a reference instead of the response that the client must follow. But I don't see any option to allow removal with Active Directory. Is there a way around this?

  Concerning

  Gerald

  I found a work around for the problem:

  The query is successful when you use the ports for the Active Directory Global catalog.

  The ports are:

  • 3268 (without encryption)

  or

  • 3269 (with SSL)

  Disadvantage: You can't just use your do domain name address all the domain controller, you must specify one with its host name.

• OBIEE 11 g Service Active Directory presentation recovery user error

  Hi team,
  
  It's a great help to all of you on learning OBIEE.
  
  I recently configured Microsoft AD on Weblogic rather than SPR. But felt like I'm in a desert of helplessness because of the long and complicated documents and settings :(
  
  Even when I have everything configured and connected to the presentation using AD Credentials services, observed following error message!
  
  Error during extraction of data from the API of Population user of the Oracle BI Server user/group.
  Error details
  Error codes: GDU6UYHS:OPR4ONWY:U9IM8TAC:OI2DL65P:SDKE4UTF
  ODBC driver returned an error (SQLExecDirectW).
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 13049] The 'gp06108' user with ' oracle.bi.publisher.scheduleReport; AtAGlance; oracle.bi.publisher.accessReportOutput; _all_; oracle.bi.publisher.accessExcelReportAnalyzer; _all_; oracle.epm.financialreporting.accessReporting; Explores; Oracle. BI. Publisher.accessOnlineReportAnalyzer; EPM_Essbase_Filter; Oracle. BI. Publisher.runReportOnline; Oracle. As.Scheduler.Security.MetadataPermission ' authorisation may not question the user population. Please ask your system administrator check the newspaper for more details on this error. (HY000)
  Please ask your system administrator check the newspaper for more details on this error.
  Expression: privileges ['Admin: catalog '] ['edit permissions']
  
  Total blockout! Everyone faces this problem earlier

  You need a username to be present in your Active Directory DN of Base that will be used as the BISystemUser. You will need to create this user in AD or use an existing AD user and then specify its letters of nobility in Enterprise Manager (expand Weblogic domain > bifoundation_domain (right click) > Security > Credentials). You need to set the system.user under oracle.bi.system card credentials. Make sure your ad password never expires or you will encounter problems in a few weeks!

  Paul