Error in DGMGRL > see Configuring

Similar Questions

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• Error message - the following translators were not loaded due to errors: spry.htm: a configuration

  Can anyone help please.

  When I try to start my DW CS3 on my PC (Win XP) this message appears every time - the following translators were not loaded due to errors: spry.htm: has configuration information that is invalid.

  I am fairly new to this Yes, can you tell me what I need to do something?

  Thank you

  Alex

  See

  Troubleshooting errors in Dreamweaver JavaScript

  http://go.Adobe.com/kb/ts_tn_19105_en-us

  Try steps 4, 6 and 12.

• Error -: AIP-50904: see message not found

  Hello
  
  We have 3 windows system act as TP (TP1 and TP2, TP3).
  
  When the message is from TP1, TP2 reached and TP2 sends back an acknowledgement to TP1.
  But when the message is from TP3, the acknowledgement of receipt is sent to TP1 instead of TP3 and appearing in TP1 error is "error -: AIP-50904: see message not found.
  
  The configuration on TP2 TP1 and TP3 are as follows:-
  
  (1) the DUNS of TP1 and TP3 IDS are the same.
  (2) the names of the TP1 and TP3 delivery channel are different.
  (3) transport server names are the same, but their IP addresses are different.
  (4) the agreement names are different, but their agreement IDs are the same.
  
  Can you please address this issue on the priority and consider the question as soon as possible?
  
  Kind regards
  Vishal
  + 919881737231

  Hi Rakesh,

  Since the duns ID TP1 and TP3 are same, B2B to TP2 resumes the incorrect agreement (the one that is indicated for the TP1) and sends it and the ACK to TP1. TP1 having not any message correlated business it is erroneous and TP3 remains waiting ACK. Please use unique IDS of DUNS to solve this problem.

  Thanks and Regrads,
  Prasanna

  Published by: Prasanna Patric on December 11, 2008 23:38

• I can't download ADOBE Flash. The error message can't since Firefox. The other error message is "CANNOT CONFIGURATION of APPLICATION." Any suggestions?

  ADOBE downloaded 12.exe. FLASH will download, but will not be installed. The error message is "cannot CONFIGURE
  APPLICATION»

  Hello, please try with adobe offline installers that are available on https://www.adobe.com/products/flashplayer/distribution3.html (choose the package "Browser Plugin" for firefox).

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• RV180W [IKE] ERROR: did not find configuration for

  I have 1 or 2 of these messages per week.

  Fri Sep 11 15:14:30 2015 (GMT + 0000): [*] [IKE] ERROR: did not find configuration for 85.25.43.94 [60105]

  I have not any clients VPN active so do not know why I get these other than intrusions attempts.

  Hello

  You have tunnels VPN site-to-site configured in the router?

  .:|:.:|:. CISCO | Russ Wyatt | Network engineer | Cisco technical support | [email protected] / * /

• vSAN 5.5 U2 - Flash Cache error reading configuration ' reason: an error occurred during the configuration of the host.

  Hosts: DL360 G6, dual quad core, 64 GB of RAM

  Discs: 3 SAS 10K rpm and 2 SSD Spidles.

  I am trying to set up one of the hosts of Read Cache Flash but I get the desciptive never so much and the defenseless error message...

  "Configuration on disk/vmfs/device/disks/naa. < longguid > has failed. "Reason: an error occurred during the configuration of the host.

  I hope that there is a log file I can verify for a more profound description of this lame error message.

  Can someone tell me where I can check on this error?

  Thank you

  Oh. k. so, it is the function of Read Cache (vFRC) Flash of vSphere and nothing to do with VSAN

  check the diaries which is throwing this error.

  ESP: /var/log/hostd.log and log/var/log/vmkernel of corresponding calendar. This will show what is happening here

  You can check the following

  one.

  Check if SSD LUNS are not used / no other partition

  # partedUtil getptbl/vmfs/devices/drives.

  b.

  Also check that the SSD lun on that host are local and eligible for the vflash

  List of devices # esxcli storage vflash

  Thank you

• The following translators were not loaded due to errors: ASP.htm: has configuration information that is invalid. on Dreamwever 2014.1.1

  I have Dreamweaver 2014.1.1 build 6982

  My computer is an iMac running Yosemite 10.10.3

  Whenever a file is opened, I get the following error message:

  "The following translators were not loaded due to errors: ASP.htm: has configuration information that is invalid.".

  
  

  generally to close this error I have to click on the button OK 3 times

  
  

  Further discussion I tried to rename the configuration file.  This only prevented the application to load completely, so the name was changed back.
  

  This has been resolved.

  'Translators were not loaded' mistakes...

• CMDTUX_CAT:754: ERROR: error parsing of the configuration files

  Hi Tuxedo Experts,
  I have compiled and related sample code Tuxedo client and server (simpapp). According to the README, the next steps is running y tmboot command. It starts smoking simpserv Server? If this is not the case, how can I start that?
  
  In addition, when I ran this 'tmboot-y' command, I get the error:
  ===========================================
  $ tmboot y
  
  tmboot: internal error: CMDTUX_CAT:754: ERROR: error parsing of the configuration files
  
  
  
  tmboot: internal error: CMDTUX_CAT:1360: ERROR: configuration file not found
  ===========================================
  
  Could you please help me with that.
  
  Thank you and best regards,
  Ahsan Asghar

  Hey Ahsan,

  Well, the error message says tmboot cannot find TUXCONFIG. If the TUXCONFIG environment variable has not been set or the tmloadcf command has not completed successfully to create TUXCONFIG. Whenever you login, you will need to run the tux.env file to set all necessary environment variables. If tmloadcf finishes successfully, it should have printed one or more of the error messages.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• dgmgrl show configuration - ORA-16610: command "Service Broker implementation" ongoing (impossible to determine status)

  Hello

  
  

  We have an active guard of data with a physical standby database. Using custom scripting zabbix we execute dgmrl 'See the configuration' and grep result of ' State of ' the output Configuration.  If this isn't "SUCCESS", then a notification is sent.

  Today @ 15:12:53 has been following the release of the primary database:
  
  ORA-16610: command "Service Broker implementation" ongoing

  DGM-17017: unable to determine the configuration state

  
  

  I happened to notice the notification immediately, connected and run "show configuration" manually, which was SUCCESSFUL. Also the next result for zabbix has SUCCESS @ 15:15:53.

  On the basis of data pending, the results have been successful all the way (also at 12:15:56).

  
  

  No errors not found in the journal to the DRC, nor in the log of the server logs or alerts. EM's own beautiful graphic. Data has been / are in sync and I couldn't find anything indicating problems.

  However, the exit for 'see the configuration' may not have been drawn from air - it something must have caused. Any ideas on this subject?
  
  

  
  

  Hello;

  It is possible, that a health check is running. OR one of your databases does not use a SPFILE.

  In any case, it is not an error, just a warning, so unless he's going on a high percentage of the time I wouldn't worry on this subject.

  Best regards

  mseberg

• Could not create a new partition or locate an existing journal of one.see configuration file

  Separated from this thread.

  I get the same error 'could not create a new partition or locate an existing configuration one.see file log', but I install windows server 2012 R2, datacenter edition. I tried the steps above and it has not changed anything. Help please!

  Salvation of demonstration,

  We have a dedicated team working on Windows Server 2012. I suggest you ask your question in the below link:

  https://social.technet.Microsoft.com/forums/en-us/home

  Hope this information is useful.

  Thank you.

• Error after company siebel configuration. SBL-ADM-02071

  Hello

  I installed on my Windows Server 2012 R2 Siebel 8.2.2.14

  I configured the gateway of Siebel and Siebel Enterprise Server. After Siebel Enterprise configuration, I noticed connect you to gtwysrvr\log:

  2021 2015-11-26 16:43:58 2015-11-26 16:43:58 + 0100 00000003 001 09 0001 1456 1668 C:\Siebel\8.2.2.14.0\ses\gtwysrvr\log\srvrmgr.log 8.2.2.14 srvrmgr 003f [23044] ENU

  1 GenericError GenericLog 0000040256570440:0 2015-11-26 16:43:58 (samisc.cpp (284) err = 2883589 sys = 0) SBL-CSC-00005: in-house: no more items found.

  1 GenericError GenericLog 0000040256570440:0 2015-11-26 16:43:58 (sasess.cpp (397) err = 591895 sys = 0) SBL-ADM-02071: Enterprise server SBA_82 not found in the gateway server

  I can not connect to the gateway server in the configuration of the siebel server.

  2021 2015-11-25 16:06:58 2015-11-25 16:06:58 + 0100 00000003 001 09 0001 2112 1696 C:\Siebel\8.2.2.14.0\ses\siebsrvr\log\commonutil.log 8.2.2.14 commonutil 003f [23044] ENG

  1 error NameServerLayerLog 0000000256550840:0 2015-11-25 16:06:58 unable to connect to the gateway server.

  GenericLog GenericError 1 0000000256550840:0 2015-11-25 16:06:58 NSC - ErrCode 5009 SysErr 0

  I can't connect to srvrmgr:

  c:\Siebel\8.2.2.14.0\ses\gtwysrvr\BIN > srvrmgr.exe/u/p SADMIN/g SADMIN localhost/e SBA_82:

  SBL-ADM-02071: Enterprise server SBA_82 not found in the gateway server

  Where is the problem? I put SIEBEL_LOG_EVENTS = 5, but I don't see anything more.

  I wrote the name of siebel enterprise properly! I reinstalled Siebel, but it did not help.  I installed Siebel about 5 times in my life and I've never had something like that.

  After update to 9 group of PATCHES, I still have the same problem

  Help, please

  I turned off all firewalls and it helped.